Zhongke Aobo
Filter
Showing 1–30 of 106 results
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model Range | 40–300 mm internal diameter |
| Price | USD 92 (approx. ¥660) |
| Material | Natural Brazilian Agate (SiO₂ ≥ 97.26 wt%) |
| Mohs Hardness | 7.2–7.5 |
| Density | 2.65 g/cm³ |
| Acid Resistance | Excellent (except HF) |
| Max Operating Temp | Ambient only (non-heat-treatable) |
| Compliance | Meets GB/T 10722–2008 (General Specifications for Agate Labware) and ISO 8549-2:1996 (Laboratory Equipment — Mortars and Pestles — Part 2: Requirements) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | Φ12–300 mm |
| Material Composition | ≥99% Al₂O₃, ≤0.2% R₂O, ≤0.1% Fe₂O₃, ≤0.2% SiO₂ |
| Bulk Density | ≥3.80 g/cm³ |
| Apparent Porosity | <1% |
| Flexural Strength | >350 MPa |
| Compressive Strength | >12,000 MPa |
| Dielectric Constant (1 MHz) | ~9.8 |
| Hardness (HRA) | 88 |
| Max. Input Particle Size | 20 mm |
| Min. Output Particle Size | 0.5 mm |
| Batch Capacity | 100 mL |
| Sample Type | Hard, brittle, non-ferrous, high-purity materials |
| Compliance | Suitable for ISO/IEC 17025-accredited labs requiring inert, non-contaminating sample preparation |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | General Distributor |
| Product Origin | Domestic |
| Model | SJ |
| Price | USD 145 (approx.) |
| Heating Element Surface Temp | 380°C |
| Input Voltage | 220 V ±10%, 50 Hz |
| Enclosure | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | High-Temperature Alkali-Free Glass Fiber |
| Heating Element | Sealed Ni-Cr Resistance Wire |
| Control Options | Electronic Variable-Temp or Intelligent Digital PID Controller |
| Available Capacities | 100–5000 mL |
| Inner Chamber Dimensions (Ø × H, mm) | φ53×45 to φ180×180 |
| Power Rating | 100–1000 W |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HJ-6 |
| Heating Element Surface Temperature | 380 °C |
| Voltage | 220 V ±10%, 50 Hz |
| Speed Range | 0–1200 rpm |
| Insulation Material | High-Temperature Alkali-Free Fiber |
| Heating Element | Sealed Ni-Cr Resistance Wire |
| Enclosure | Seamless Drawn Metal Shell with Epoxy Powder Coating |
| Control Type | Solid-State Electronic Temperature & Speed Regulation |
| Compliance | Designed for General Laboratory Use under IEC 61010-1 Safety Standards |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | DZKW-2 |
| Heating Power | 500 W (for single-row dual-hole configuration) |
| Temperature Range | Ambient +10 °C to 100 °C |
| Temperature Stability | ±1 °C |
| Construction | Transparent engineering plastic housing and inner chamber |
| Control System | Digital PID temperature controller with LED display and touch-sensitive keypad |
| Compliance | Designed for general laboratory use under ISO/IEC 17025-aligned environments |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FGJ |
| Price | USD 2,100 (approx.) |
| Construction Material | Borosilicate Glass & Stainless Steel (KF Vacuum Components) |
| Operating Pressure Range | Low Vacuum to High Vacuum (Mechanical Pump: ≤50 Pa |
| Turbo-Molecular Pump | ≤5×10⁻⁴ Pa) |
| Leak Rate | ≤2×10⁻¹¹ Pa·m³/s |
| Tube Capacity | Up to 1 L |
| Max. Tube OD | 45 mm |
| Min. Tube OD | 8 mm |
| Max. Tube Wall Thickness | 2 mm |
| Max. Tube Length | 500 mm |
| Rotational Speed | 0–20 rpm (adjustable via precision potentiometer, digitally displayed) |
| Vacuum Interface | KF25 |
| Inlet Fitting | 6 mm Swagelok compression |
| Included Accessories | KF25 Gate Valve ×1, KF25 Bellows ×1, KF16 Vent Valve ×1, KF16 Mechanical Vacuum Gauge ×1, Torch Mounting Fixture ×1, Polarizing Viewer ×1, High-Temperature Gloves ×1, Quartz Tubes (with quartz rods) ×2, Quartz Tube Adapter ×1, KF16 Clamp Set ×1, KF25 Clamp Set ×2, 6 mm Inlet Tubing (3 m), Power Adapter ×1 |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 101-1 |
| Instrument Type | Precision Drying Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±1°C |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Internal Chamber Dimensions (W×D×H) | 350×350×350 mm |
| External Dimensions (W×D×H) | 650×500×650 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Tubular Heaters with Forced Air Circulation |
| Operating Ambient Temperature | ≤30°C |
| Net Weight | 42 kg |
| Power Supply | AC 220 V / 50 Hz |
| Rated Power | 1.2 kW |
| Standard Shelving | 2 Adjustable Stainless Steel Wire Shelves |
| Key | Brand: Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Material | ≥99% Al₂O₃ |
| Max Continuous Use Temp | 1600 °C |
| Max Short-Term Temp | 1800 °C |
| Bulk Density | ≥3.80 g/cm³ |
| Apparent Porosity | <1% |
| Flexural Strength | >350 MPa |
| Compressive Strength | >12,000 MPa |
| Dielectric Constant (1 MHz) | ~9.8 |
| Volume | 30 mL |
| Shape | Arc-shaped (hemispherical) |
| Outer Diameter | 38 mm |
| Inner Bottom Diameter | 25 mm |
| Height | 45 mm |
| Wall Thickness | 1.7 mm |
| Mass | ~0.03 kg |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | 800A |
| Heating Method | Radiant Heat |
| Max Operating Temperature | 825 °C |
| Temperature Control Accuracy | ±1 °C |
| Temperature Uniformity | ±2 °C |
| Heating Power | 200 W |
| Chamber Dimensions (W×D×H) | 14 mm × 140 mm (bore diameter × heating zone length) |
| Max Insertable Item Diameter | 14 mm |
| Standby Temperature | 480 °C |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Weight | 1.3 kg |
| Operating Ambient | 10–50 °C, ≤90% RH, unlimited altitude |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Φ60 × 1000 mm |
| Volume Capacity | 1 L |
| Working Pressure | Low-pressure (≤0.1 MPa gauge) |
| Vacuum Rating | 0.1 MPa (absolute) |
| Material | 99% Al₂O₃ (Fused Alumina / Corundum) |
| Max Continuous Use Temperature | 1600 °C |
| Short-Term Peak Temperature | 1800 °C |
| Mohs Hardness | 9 |
| Water Absorption | 0.01–0.02 % |
| Thermal Shock Resistance | Excellent |
| Electrical Resistivity (1000 °C) | >10¹² Ω·cm |
| Dielectric Constant (1 MHz, 25 °C) | ~9.8 |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | BX-2 / BX-6 / BX-10 |
| Temperature Control Range | 5–45 °C |
| Operating Ambient Temperature | 25 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±0.1 °C |
| Chamber Dimensions (D×W×H) | 110×140×120 mm (BX-2) / 190×180×175 mm (BX-6) / 210×220×220 mm (BX-10) |
| External Dimensions (D×W×H) | 180×230×160 mm (BX-2) / 300×260×295 mm (BX-6) / 280×310×300 mm (BX-10) |
| Chamber Volume | 2 L / 6 L / 10 L |
| Inner Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Tubular Heaters |
| Door Seal | Magnetic Gasket |
| Power Supply | 220 V AC |
| Power Consumption | 80 W (BX-2), 100 W (BX-6), 125 W (BX-10) |
| Brand | Zhongke Aobo |
|---|---|
| Model | CJ-20D |
| Type | Magnetic Stirrer |
| Max. Stirring Volume | 5000 mL |
| Speed Range | 100–1500 rpm |
| Heating Temperature Range | Ambient to 350 °C |
| Power | 600 W |
| Heating Plate Size | 200 × 200 mm |
| Temp. Control Accuracy | ±1 °C |
| Timer Function | None |
| Dimensions (W×D×H) | 310 × 200 × 130 mm |
| Construction | Cold-Rolled Steel Housing, Enamel-Coated Aluminum Heating Plate |
| Motor | Imported Brushless DC Motor |
| Safety | Over-Temperature Cut-Off Alarm |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | CP |
| Price Range | USD 140–700 (FOB) |
| Instrument Type | General-Purpose |
| Tank Capacity | 6 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power Output | 120 W |
| Power Adjustment Range | 10–100% in 10% increments |
| Heating Temperature Range | Ambient +5°C to 80°C |
| Timer Range | 0–80 min |
| Sound-Dampening Lid | Yes |
| Drainage | Manual |
| Input Voltage | 220 V ± 22 V, 50 Hz ± 1 Hz |
| Tank Dimensions (L×W×H) | 300 × 150 × 150 mm |
| External Dimensions (L×W×H) | 323 × 178 × 313 mm |
| Net Weight | 5.1 kg |
| Housing Material | Stainless Steel |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | Custom Triple-Zone Vertical Tube Furnace |
| Instrument Type | Tube Furnace |
| Max Temperature | 1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3000 W |
| Heating Rate (to Max Temp) | 30 °C/min |
| Heating Method | Resistance Wire |
| Internal Dimensions | 120 mm (ID) × 400 mm (L) |
| Control System | PID Intelligent Programmable Temperature Controller |
| Nominal Volume | 10 L |
| Compliance | ASTM E220, ISO/IEC 17025-compatible operation environment, GLP-aligned data logging capability |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1700 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power | 10 kW |
| Heating Rate (to Max Temp) | 30 °C/min |
| Heating Method | Resistive Load |
| Internal Chamber Dimensions | Customizable |
| Chamber Volume Options | 6 L, 9 L, 20 L, 30 L, 60 L |
| Insulation Material | High-Purity Ceramic Fiber |
| Power Supply | 220 V/16 A (for ≤9 L) |
| Surface Temperature at 1000 °C Hold | ≤55 °C |
| Safety Features | Over-Temperature Protection, Auto Cut-Off, Independent Controller Interlock, Optional Gas Inlet/Exhaust Ports |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Type | Tube Furnace |
| Max Temperature | 1700 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 10 kW |
| Heating Rate to Max Temp | ≤170 min (typical) |
| Heating Method | Electric (Fiber-Embedded Resistance Heating) |
| Internal Dimensions | Custom-Engineered per Drawing |
| Construction | Hybrid Fiber-Resistive Heating Module Assembly |
| Operating Temp Range | 1250–1600 °C (continuous), up to 1700 °C (intermittent) |
| Bulk Density | 200–600 kg/m³ |
| Thermal Conductivity | 0.16 W/(m·K) @ 1000 °C |
| Linear Shrinkage after Reheating | ≤2.0% @ 1500 °C × 1 h |
| Mechanical Workability | Machinable to Complex Geometries |
| Thermal Shock Resistance | High |
| Heat Capacity | Low |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | DC |
| Type | Circulating Refrigerated/Heated Bath |
| Temperature Range | −40 °C to 100 °C |
| Stability | ±0.05 °C (typical) |
| Reservoir Volume | 6–35 L |
| Circulation Mode | Internal & External |
| Pump Flow Rate | 4–12 L/min |
| External Port | Ø10 mm |
| Display Resolution | 0.01 °C |
| Safety Features | Over-Temp Alarm, Low-Level Detection, Dry-Run Protection |
| Dimensions (W×D×H, mm) | Up to 400×325×230 (tank only) |
| Total height with casters | +80 mm |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DF-101S |
| Stirring Capacity | 2 L |
| Speed Range | 0–2800 rpm |
| Temperature Control Range | Ambient to 400 °C |
| Heating Power | 500 W |
| Control System | PID-based Microprocessor Controller |
| Motor Type | Brushless DC Motor (Imported from Japan) |
| Heating Element | High-Temperature-Aged Stainless Steel Immersion Heater |
| Magnetic Coupling | High-Grade NdFeB Permanent Magnet |
| Construction | Polished 304 Stainless Steel Bath Chamber |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | Zhongke Aobo |
|---|---|
| Model | DL-1 |
| Type | Enclosed Universal Electric Heating Mantle |
| Power Options | 1 kW (single station), 2 kW (single or dual station), 4 kW (quad station), 6 kW (hex station) |
| Voltage | 220 V AC |
| Heating Plate Diameter | Ø180 mm (FL-2Y/FL-2YA variants) |
| Max Operating Temperature | 600 °C |
| Dimensions (L×W×H, mm) | 162×180×130 (1 kW) to 855×180×130 (6 kW) |
| Net Weight | 2.3–10.9 kg |
| Construction | Cold-rolled steel housing with corrosion-resistant epoxy coating |
| Control | Analog infinite-adjustment thermostat (DL-1 series) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DZ |
| Price | USD 2,800 (FOB Beijing) |
| Chamber Material | 304 Stainless Steel (customizable to 316 SS, aluminum, or carbon steel) |
| Internal Dimensions | Φ88 mm × 59 mm |
| External Dimensions | Φ112 mm × 65 mm |
| Weight | ~2.6 kg |
| Viewport Diameter | Φ47 mm |
| Vacuum Flanges | KF25 (pumping), KF16 (gauge), metric/inch gas fittings (M3/M6, 1/8″/1/4″), silicone diaphragm liquid injection port |
| Electrical Feedthroughs | 2 × 8-pin hermetic signal connectors (8 A rating) |
| Max Positive Pressure | ≤0.1 MPa |
| Base Pressure | ≤5 Pa (with rotary vane pump, 5 min) |
| Ultimate Pressure | ≤5×10⁻³ Pa (with turbomolecular pump, 30 min) |
| Operating Temperature Range | −190 °C to +1000 °C (chamber body) |
| sample stage | RT to +400 °C |
| Sample Stage | 28 mm × 28 mm stainless steel, resistive heating, PT100 sensing, ±0.5 °C accuracy, 50 °C/min max ramp rate |
| Temperature Control | 30-segment programmable PID with auto-tuning, 0.1 °C resolution, 7-inch HMI display |
| Surface Finishes | Electropolished, passivated, sandblasted, acid-washed, or mirror-finished per ASTM A967 / ISO 15730 |
| Sealing Options | Fluoroelastomer (FKM) O-rings or oxygen-free copper (OFHC) metal gaskets |
| Welding Process | Orbital TIG welding under high-purity argon purge |
| Leak Detection | Helium mass spectrometry (≤1×10⁻¹⁰ mbar·L/s sensitivity) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | DZF-6020AB |
| Temperature Range | Ambient to 200 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Dimensions (W×D×H) | 275 × 300 × 300 mm |
| External Dimensions (W×D×H) | 655 × 480 × 510 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Embedded Tubular Heaters |
| Vacuum Performance | ≤133 Pa (≤1 Torr) |
| Power Rating | 0.3 kW |
| Voltage | 220 V ±10%, 50 Hz |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | DZKW-D-1 to DZKW-D-4 (Single/Double Row, 1–8 Wells) |
| Bath Volume | 2–18 L |
| Temperature Range | Ambient +10°C to 100°C |
| Temperature Uniformity | ≤ ±1°C |
| Temperature Stability (Fluctuation) | ≤ ±1°C |
| Control Accuracy (Setpoint Deviation) | ≤ ±2°C |
| Heating Power | 300–2000 W |
| Supply Voltage | 220 V, 50 Hz |
| Chamber Dimensions (W×D×H, mm) | 170×170×90 to 620×325×90 |
| Construction | Stainless Steel Interior & Lid, Electrostatically Powder-Coated Exterior |
| Control Options | Analog Pointer or Digital LED Display |
| Circulation | Non-Circulating (Static Bath) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | FW80 |
| Voltage | AC 220 V, 50 Hz |
| Power | 200 W |
| Speed | 10,000 rpm |
| Chamber Dimensions | Φ80 × 40 mm |
| Batch Capacity | 50–400 g |
| Feed Size | ≤1 mm |
| Output Particle Size | 40–200 mesh (≈74–420 µm) |
| Minimum Output Granularity | ≥0.5 mm |
| Net Weight | 2.5 kg |
| Gross Weight | 2.7 kg |
| Equipment Type | Benchtop Impact Crusher |
| Sample Type | Hard, brittle, dry materials |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL |
| Chamber Volume Options | 6 L, 9 L, 20 L, 30 L, 60 L |
| Max Operating Temperature | 1000 °C (standard), optional up to 1700 °C |
| Heating Rate | ≤30 min (100 °C → 1000 °C) |
| Power Supply | 16 A / 220 V (6 L & 9 L) |
| External Surface Temperature at 1000 °C Hold | ≤55 °C |
| Insulation Material | High-purity ceramic fiber |
| Heating Element Configuration | Dual-side embedded heating panels with imported ultra-high-temperature resistance elements |
| Control System | Independent digital temperature controller with PID algorithm, programmable ramp/soak profiles, and real-time display |
| Safety Features | Over-temperature protection, thermal cut-off switch, door interlock, grounded chassis |
| [Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL0612 |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 3000 W |
| Heating Zone Length | 400 mm |
| Constant-Temperature Zone Length | 200 mm |
| Chamber Dimensions (ID) | Φ120 × 400 mm |
| Heating Element | HRE Alloy Wire |
| Tube Material | Fused Quartz (Standard) |
| Control System | 50-Stage Programmable PID Controller with Auto-Tuning & Power-Fail Recovery |
| Sealing | KF Flange with Dual Silicone O-Rings |
| Gas Compatibility | Inert, Reducing, Oxidizing (N₂, Ar, O₂, CO₂), Non-Toxic/Non-Flammable Only |
| Insulation | Polycrystalline Mullite Fiber Vacuum-Formed Liner |
| Safety Features | Surface Temperature Interlock (Fan Activation at ≥45 °C), Over-Temperature Alarm, Step-Joint Furnace Body Design] |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL0614 |
| Maximum Temperature | 1400°C |
| Control Accuracy | ±1°C |
| Rated Power | 5 kW |
| Heating Rate (to Max Temp) | 20°C/min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 60 mm ID × 300 mm L |
| Furnace Type | Horizontal Vacuum/Atmosphere Tube Furnace |
| Tube Material | 99% Alumina Ceramic (Al₂O₃) |
| Sealing | 304 Stainless Steel KF Flanges with Dual Viton/Silicone O-Rings |
| Temperature Sensor | Type S Thermocouple |
| Control System | 30-Stage Programmable PID Controller with Auto-Tuning & Power-Fail Recovery |
| Insulation | Polycrystalline Molybdenum Fiber Blanket |
| Cooling | Dual-Layer Shell with Active Air-Cooling Fan (Auto-activated at surface temp ≥45°C) |
| Gas Compatibility | Inert (N₂, Ar), Oxidizing (O₂, CO₂), Non-Flammable/Non-Toxic Gases Only |
| Compliance | Designed for ISO/IEC 17025 laboratory environments |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL0617 |
| Max Temperature | 1700°C |
| Control Accuracy | ±1°C |
| Max Power | 5 kW |
| Heating Element | MoSi₂ (Silicon Molybdenum) Rods |
| Internal Chamber Dimensions | 60 mm ID × 300 mm L |
| Vacuum Limit | ≤ −0.1 MPa |
| Thermocouple Type | Type B |
| Heating Zone Length | 300 mm |
| Uniform Temperature Zone Length | 120 mm |
| Tube Material | 99% Al₂O₃ Ceramic (Alumina) |
| Sealing | Dual-O-ring KF Flange (AISI 304 Stainless Steel) |
| Programmable Controller | 50-Stage PID with Auto-Tuning & Power-Fail Recovery |
| Gas Compatibility | Inert (N₂, Ar), Oxidizing (O₂), CO₂ — non-toxic, non-flammable, non-explosive only |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL0814 |
| Max Temperature | 1300 °C |
| Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Rate (to Max Temp) | 50 °C/min |
| Heating Method | Resistance Wire |
| Internal Chamber Dimensions | 300 × 200 × 150 mm |
| Furnace Type | Box-Type Tube Furnace |
| Compliance | CE-marked design principles, compatible with ISO/IEC 17025 laboratory environmental control requirements |
| [Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GL1012 |
| Max Temperature | 1200 °C |
| Control Accuracy | ±1 °C |
| Max Power | 3000 W |
| Heating Rate (to max temp) | 30 °C/min |
| Heating Method | Resistance Wire (HRE Alloy) |
| Chamber Dimensions | 120 mm ID × 420 mm L |
| Control System | PID-based 30-Stage Programmable Controller |
| Tube Dimensions | Φ100/Φ92 mm × 1000 mm (quartz or high-purity alumina ceramic options available) |
| Insulation | Polycrystalline mullite fiber vacuum-formed lining |
| Sealing | Dual-O-ring KF stainless steel flanges (304 SS) |
| Gas Compatibility | Inert (N₂, Ar), oxidizing (O₂, CO₂), reducing (H₂, forming gas) — non-toxic/non-explosive only |
| Safety Features | Surface temperature auto-cooling (fan activation at ≥45 °C), over-temperature alarm, step-joint furnace door design for structural integrity and thermal containment] |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GW-50 |
| Temperature Range | Ambient to 500°C |
| Temperature Uniformity | ±1°C |
| Chamber Dimensions (W×D×H) | 350×350×350 mm |
| External Dimensions (W×D×H) | 510×650×750 mm |
| Chamber Material | AISI 304 Stainless Steel |
| Heating Method | Electric Alloy Wire with Forced-Air Circulation |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 3000 W |
| Temperature Resolution | 0.1°C |
| Control System | Intelligent PID Controller with Timer, Over-Temperature Alarm, and Auto-Tuning Functionality |