Zhongke Aobo
Filter
Showing 31–60 of 106 results
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | GZX-150 |
| Capacity | 150 L |
| Temperature Range (with light) | 10–65 °C |
| Temperature Range (dark) | 5–65 °C |
| Illumination Range | 0–10,000 lx |
| Temperature Uniformity | ±1 °C |
| Power Consumption | 800 W |
| Internal Dimensions (D×W×H) | 400×500×750 mm |
| External Dimensions (D×W×H) | 640×660×1420 mm |
| Net Weight | 72 kg |
| Voltage/Frequency | 220 V / 50 Hz |
| Brand | Zhongke Aobo |
|---|---|
| Model | HH-SA |
| Type | Circulating Oil Bath |
| Capacity | 24 L |
| Temperature Range | RT+5°C to 300°C |
| Temperature Stability | ±0.5°C |
| Circulation Mode | Internal and External (user-selectable) |
| Pump Flow Rate | 8 L/min (internal), 6 L/min (external) |
| Bath Chamber Dimensions | 400 × 300 × 200 mm |
| Opening Dimensions | 290 × 235 mm |
| Power Supply | AC 220 V, 1500 W |
| Construction | 304 Stainless Steel Inner Tank & Heating Element |
| External Port Fitting | Ø10 mm Stainless Steel Tubing Interface |
| Safety Compliance | Grounding Required, Dry-Run Protection Mandatory |
| Application Limitation | Not suitable for high-viscosity thermal oils |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | 80×1000 mm |
| Price | USD 280 (FOB Beijing) |
| Al₂O₃ Content | 99.0–99.3 wt% |
| Density | 3.88 g/cm³ |
| Water Absorption | ≤0.01% |
| Cold Crushing Strength | ≥350 MPa |
| Vacuum Leak Rate | <1×10⁻¹¹ Torr·L/s |
| Thermal Expansion Coefficient (20–1000 °C) | 8.2×10⁻⁶ /°C |
| Thermal Conductivity (25 °C) | 25 W/(m·K) |
| Electrical Insulation Strength (20 °C) | ≥20 kV/mm |
| DC Volume Resistivity (20 °C) | ≥1×10¹⁴ Ω·cm |
| High-Temperature Insulation Resistance | ≥0.08 MΩ at 1000 °C, ≥0.02 MΩ at 1300 °C |
| Max Continuous Use Temperature | 1600 °C |
| Max Short-Term Service Temperature | 1800 °C |
| Flexural Strength at 1600 °C | ≥160 MPa |
| Non-Wetting Behavior at 1600 °C | No Adhesion Observed |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HJ-6A (100–2000 mL capacity variants) |
| Maximum Stirring Volume | 20 L |
| Speed Range | 0–1200 rpm |
| Temperature Control Range | Ambient to 380 °C (heating element surface temperature) |
| Power Rating | 100–4000 W (model-dependent) |
| Voltage | 220 V ±10%, 50 Hz |
| Insulation Material | High-temperature alkali-free fiberglass |
| Heating Element | Sealed Ni-Cr resistance wire |
| Enclosure | Seamless deep-drawn metal housing with epoxy coating |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HJS Intelligent Programmable Temperature-Controlled Magnetic Stirring Heating Mantle |
| Capacity Options | 100 mL, 250 mL, 500 mL, 1000 mL, 2000 mL, 3000 mL |
| Power Rating | 100 W – 600 W (model-dependent) |
| Max Operating Temperature | 380 °C |
| Temperature Control Accuracy | ±1 °C |
| Stirring Speed Range | 100 – 1500 rpm |
| Dual Temperature Sensing | Internal mantle core + external liquid probe |
| Display | Dual digital LCD (temperature & speed) |
| Heating Element | Sealed Ni-Cr resistance wire embedded in high-temp alkali-free glass fiber insulation |
| Drive Motor | Imported brushless DC motor |
| Housing | Cold-rolled steel with epoxy powder coating |
| Compliance | Designed for laboratory use under general GLP conditions |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HS·Z68·5 |
| Capacity | 5 L |
| Output Rate | 5 L/h |
| Power | 575 W |
| Voltage | 220 V AC |
| Dimensions (Ø × H) | 220 × 750 mm |
| Net Weight | 5 kg |
| Construction | Electropolished 316 stainless steel body with quartz-glass condenser assembly |
| Instrument Type | Benchtop electric distillation apparatus for primary-grade distilled water production |
| Brand | Zhongke Aobo |
|---|---|
| Model | HWS-80 |
| Temperature Range (with Humidification) | 10–50 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 50–90 %RH |
| Chamber Capacity | 80 L |
| Power Supply | 220 V, 50 Hz |
| Temperature Resolution | 0.1 °C |
| Humidity Fluctuation | ±5–8 %RH |
| Internal Dimensions (D×W×H) | 400×400×500 mm |
| External Dimensions (D×W×H) | 640×560×1070 mm |
| Net Weight | 63 kg |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | JJ-1 |
| Motor Power Options | 25 W / 40 W / 60 W / 100 W / 160 W / 200 W / 300 W |
| Speed Range | 0–2500 rpm |
| Timer Range | 0–120 min (with continuous operation mode) |
| Max. Mixing Volume | 50 L |
| Voltage | AC 220 V, 50 Hz |
| Stirring Rod Material | Stainless Steel (AISI 304) |
| Control Type | Analog Knob-Based Continuous Speed Adjustment |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-2 (EMC), EN 61010-1 (Safety) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | MJX-80 |
| Capacity | 80 L |
| Temperature Range | 5–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Power Consumption | 600 W |
| Interior Dimensions (D×W×H) | 400×400×500 mm |
| Exterior Dimensions (D×W×H) | 610×560×1070 mm |
| Net Weight | 54 kg |
| Voltage/Frequency | 220 V / 50 Hz |
| Refrigerant | Eco-friendly non-CFC |
| Control System | Microprocessor-based PID controller with timer, over-temperature alarm, and fault diagnostics |
| Safety Features | Compressor overheat protection, UV sterilization lamp, magnetic door seal, dual-stage thermal cutoff |
| Optional Accessories | RS-485 interface, USB data logging, thermal printer, SMS alarm module |
| Brand | Zhongke Aobo |
|---|---|
| Model | ML |
| Type | Benchtop Digital Thermostatic Heating Plate |
| Construction | Cold-rolled steel housing with epoxy coating |
| Heating Surface | 304 stainless steel or cast iron (user-selectable) |
| Temperature Control | PID-regulated digital LED controller |
| Max Operating Temperature | 400 °C |
| Power Range | 1.5–3 kW (model-dependent) |
| Input Voltage | 220 V AC, 50 Hz |
| Dimensions (L×W×H) | 400×280×200 mm / 450×350×200 mm / 600×400×200 mm |
| Compliance | CE-marked design principles |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | ML-1.5-4 |
| Heating Power | 1.5 kW |
| Max Temperature | 400 °C |
| Temperature Uniformity | ±1–2 °C |
| Plate Dimensions | 400 × 280 mm |
| Heating Zone Dimensions | 400 × 280 mm |
| Display | Digital LED |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | ML-2-4 |
| Heating Power | 2.5 kW |
| Max. Heating Temperature | 400 °C |
| Temperature Uniformity | ±5–10 °C (across plate surface) |
| Plate Dimensions | 450 × 350 mm |
| Heating Zone Dimensions | 450 × 350 mm |
| Display Type | Digital LED |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | ∅100–∅300 mm |
| Material | 99% Al₂O₃ High-Purity Alumina Ceramic |
| Bulk Density | ≥3.80 g/cm³ |
| Apparent Porosity | <1% |
| Flexural Strength | >350 MPa |
| Compressive Strength | >12,000 MPa |
| Dielectric Constant (1 MHz) | ~9.8 |
| Vickers Hardness | ≥1,400 HV (equivalent to HRA 88) |
| Chemical Purity | Al₂O₃ ≥99.0 wt%, R₂O ≤0.2 wt%, Fe₂O₃ ≤0.1 wt%, SiO₂ ≤0.2 wt% |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | Φ300 / Φ250 / Φ200 / Φ150 / Φ120 mm |
| Material | ≥99% Al₂O₃ High-Purity Alumina Ceramic |
| Bulk Density | ≥3.80 g/cm³ |
| Apparent Porosity | <1% |
| Flexural Strength | >350 MPa |
| Compressive Strength | >12,000 MPa |
| Dielectric Constant (1 MHz) | ~9.8 |
| Vickers Hardness | ~1700 HV (equivalent to HRA 88) |
| Max Feed Size | 15 mm |
| Minimum Output Particle Size | ≥0.5 mm |
| Batch Capacity | 100 g |
| Sample Compatibility | Hard, brittle, non-fibrous inorganic materials (e.g., oxides, salts, pharmaceutical excipients, catalysts) |
| Compliance | ASTM C704, ISO 6474-1, GB/T 7917.1–1987 |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | PQ-C4Z |
| Flow Range | 20 sccm – 30 slm (configurable per gas) |
| Accuracy | ±1% F.S. (standard), ±1% F.S. (high-precision) |
| Repeatability | ±0.2% F.S. |
| Linearity | ±0.5% F.S. (high-precision), ±1% F.S. (standard) |
| Response Time | ≤2 s (high-precision), ≤4 s (standard) |
| Operating Temperature | 5–45 °C |
| Power Supply | 85–265 VAC, 50/60 Hz |
| Max. Power Consumption | 40 W |
| Inlet Pressure Limit | ≤0.6 MPa |
| Outlet Pressure Monitoring | 0–0.6 MPa |
| Gas Mixing Chamber | Integrated |
| Programmable Stages | 5-segment time–flow profile |
| Auto-Cleaning Function | Yes |
| Flow Accumulation | Yes |
| Electromagnetic Interference Shielding | Yes |
| Housing Material | 316 stainless steel tubing & dual-ferrule fittings |
| Dimensions | 460 × 210 × 480 mm |
| Weight | 18 kg |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | QE0414 |
| Instrument Type | Box Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 4000 W |
| Heating Time to Max Temp | 60 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 200 × 150 × 150 mm |
| Chamber Material | 1600°C-rated Polycrystalline Mullite Alumina Ceramic Fiber |
| Sealing | Full-perimeter High-Temp Silicone Gasket with Four-Point Manual Clamping |
| Atmosphere Compatibility | Inert (N₂, Ar), Reducing (H₂, CO), Vacuum (≤10⁻² mbar typical with optional pump) |
| Control System | 30-Stage Programmable PID Controller with Auto-Ramp/Soak |
| Optional Interface | RS-485 for PC-based operation and data logging |
| Brand | Zhongke Aobo |
|---|---|
| Model | QE0417 |
| Type | Box-type Muffle Furnace |
| Max Temperature | 1700 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Dimensions (W×D×H) | 200×150×150 mm |
| Internal Volume | 4.5 L |
| Max Power | 4 kW |
| Heating Rate (to Max Temp) | ≤90 min |
| Heating Elements | Silicon Molybdenum Rods / Silicon Carbide Rods / Resistance Wire |
| Atmosphere Options | Vacuum, Inert (N₂, Ar), Reducing (H₂/N₂), or Controlled Oxidizing (Air, O₂) |
| Control System | 30-Stage Programmable PID with Auto-Tuning |
| Communication Interface | Optional RS-485 for PC Integration |
| Insulation | Lightweight Alumina Ceramic Fiber |
| Safety Protection | Dual-Circuit Over-Temp, Thermocouple Break, Over-Current, Over-Voltage, and Deviation Alarm |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | SHP-80 |
| Temperature Range | 5–50 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Volume | 80 L |
| Power Supply | 220 V, 50 Hz |
| Input Power | 600 W |
| Chamber Dimensions (D×W×H) | 400×400×500 mm |
| External Dimensions (D×W×H) | 610×560×1070 mm |
| Net Weight | 54 kg |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | SJ-100ml |
| Capacity | 100 mL |
| Inner Core Dimensions | Φ53 × 45 mm |
| Power | 100 W |
| Voltage/Frequency | AC 220 V, 50 Hz |
| Max Surface Temperature | 380 °C |
| Heating Method | Microprocessor-controlled PID temperature regulation with dual-sensor input (heater core + sample) |
| Construction | Ni-Cr resistance wire embedded in alkali-free high-temp glass fiber insulation |
| Brand | Zhongke Aobo |
|---|---|
| Model | SM35-45 |
| Type | Graphite Electric Heating Plate for Sample Digestion |
| Plate Dimensions | 400 × 300 mm |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | ±1 °C |
| Heating Power | 3.5 kW |
| Control Method | PID Programmable Digital Temperature Control |
| Plate Material | Isostatically Pressed High-Purity Graphite (≥99.9% C) |
| Plate Thickness | 30 mm |
| Display | LED Digital Display |
| Voltage/Frequency | AC 220 V / 50 Hz |
| Weight | 15 kg |
| External Dimensions (D×W×H) | 300 × 500 × 225 mm |
| Insulation | Dual-Layer (Air Gap + Aluminosilicate Ceramic Fiber) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SM-35-45 |
| Price | USD 1,550 (approx.) |
| Heating Power | 3.5 kW |
| Max. Operating Temperature | 450 °C |
| Temperature Uniformity | ±1–3 °C across surface |
| Plate Dimensions | 400 × 300 mm |
| Heating Zone Dimensions | 400 × 300 mm |
| Display | Digital LED |
| Brand | Zhongke Aobo |
|---|---|
| Model | SM35-45 |
| Origin | Beijing, China |
| Heating Power | 3500 W |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | ±2 °C across heating surface |
| Heating Surface Dimensions | 300 × 400 mm |
| Graphite Block Thickness | 30 mm |
| Control Method | PID-based Programmable Temperature Controller |
| Temperature Accuracy | ±1 °C |
| Input Voltage | AC 220 V, 50 Hz |
| Overall Dimensions (D×W×H) | 300 × 500 × 225 mm |
| Weight | 15 kg |
| Material | Isostatically Pressed High-Purity Graphite (≥99.9% carbon) |
| Surface Finish | Acid-resistant epoxy-powder coated housing |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | SM35-45 |
| Heating Power | 3.5 kW |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | ±1–2 °C |
| Plate Dimensions | 400 × 300 mm |
| Heating Zone Dimensions | 400 × 300 mm |
| Control Interface | Intelligent PID Programmable Controller |
| Brand | Zhongke Aobo |
|---|---|
| Model | SM35-45F |
| Heating Power | 3.5 kW |
| Max Temperature | 450 °C |
| Temperature Uniformity | ±1 °C |
| Plate Dimensions | 400 × 300 mm |
| Heating Zone Dimensions | 400 × 300 mm |
| Display | LED |
| Control Method | PID-based 30-segment programmable temperature ramping |
| Plate Material | Isostatically pressed high-purity graphite with PTFE anti-corrosion coating |
| Plate Thickness | 30 mm |
| Voltage | AC 220 V, 50 Hz |
| Weight | 15 kg |
| Connection Cable Length | 2 m |
| Structural Design | Split-type (separate controller and heating block) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SMP Integrated Graphite Electric Heating Plate |
| Price | USD 420 (est.) |
| Heating Power | 2000 W |
| Temperature Controller | PID |
| Max. Operating Temperature | 450 °C |
| Temperature Uniformity | ±5 °C across surface |
| Plate Dimensions | 400 × 280 mm |
| Heating Zone Dimensions | 400 × 280 mm |
| Display | LED |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | SPX Series |
| Temperature Range | 5–50 °C (standard configuration) |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Power Supply | 220 V, 50 Hz |
| Capacity Options | 50–450 L |
| Refrigeration | Eco-friendly R134a-free compressor cooling system |
| Air Circulation | Forced-air convection via internal fan |
| Safety Features | Over-temperature protection, compressor overheat protection, microprocessor fault detection, magnetic door seal, grounding terminal |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SXKW |
| Price | USD 72 (approx.) |
| Heating Capacity | 100–50,000 mL |
| Power Range | 180–6000 W |
| Input Voltage | 220 V ±10%, 50 Hz |
| Max Surface Temperature | 380 °C |
| Control Method | Digital PID Temperature Controller with LED Display |
| Temperature Setting Resolution | 1 °C |
| Operating Mode | Continuous Duty |
| Construction | Cold-Rolled Steel Housing with Electrostatic Powder Coating |
| Safety Features | Over-Temperature Protection, Ground Fault Detection, Thermal Insulation Layer |
| Compliance | CE-marked per IEC 61010-1 (Laboratory Equipment Safety), RoHS 2 Directive Compliant |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | SXKW-100-4 |
| Configuration | 4-position (quadruple) |
| Rated Power | 400 W (for 100 mL × 4 configuration) |
| Max. Flask Capacity per Position | 100 mL |
| Dimensions (L×W×H) | 550 × 290 × 150 mm |
| Net Weight | 7.25 kg |
| Housing Material | Cold-rolled steel with electrostatic powder coating |
| Heating Element | Sealed Ni-Cr resistance wire embedded in high-temp alkali-free glass fiber insulation |
| Control System | PID-based digital temperature controller with LED display |
| Temperature Range | Ambient to 400 °C (adjustable in 1 °C increments) |
| Temp. Stability | ±1 °C at setpoint (under standard lab conditions) |
| Safety Features | Over-temperature cut-off, grounded chassis, no open flame |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SXKW-500 |
| Price | USD 85 (FOB) |
| Max Operating Temperature | 380 °C |
| Heating Power | 500 W |
| Speed Range | 0–1200 rpm |
| Input Voltage | AC 220 V ±10% |
| Max Stirring Volume | 500 mL |
| Insulation Material | High-Temperature Alkali-Free Fiberglass |
| Heating Element | Sealed Ni-Cr Resistance Wire |
| Control Type | Solid-State Electronic Temperature & Speed Regulation |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | TC |
| Heating Power | 1.6 kW |
| Max. Heating Temperature | 400 °C |
| Temperature Uniformity | ±3 °C |
| Plate Surface Dimensions | 300 × 300 mm |
| Heating Zone Dimensions | 300 × 300 mm |
| Display Type | Digital LED |