Common Laboratory Equipment
Filter
Showing 2941–2970 of 17824 results
| Brand | CIF |
|---|---|
| Origin | Beijing, China |
| Model | AP-3.500mL |
| Digestion Type | Graphite Heating |
| Automation Level | Semi-Automatic |
| Digestion Positions | 31 |
| Max Heating Temperature | 260 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Principle | Graphite Block Heating |
| Reagent Channels | Graphite Heating槽 (Note: “Graphite Heating槽” is a mistranslation in source |
| Material Contacting Acids | PFA and PTFE Only |
| Pure Acid Output Capacity | 1200 mL/24h |
| Sample Vessel Diameter | Φ44 mm |
| Dimensions (W×D×H) | 300×200×380 mm |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 1.8 kW |
| Control Interface | 5-inch Full-Color Touchscreen |
| Temperature Calibration | Yes |
| Programmable Segments | Up to 100 (10 methods × 10 gradients each) |
| Safety Features | Dry-run Protection, Over-Temperature Alarm, Auto Shut-off, Delayed & Scheduled Start |
| Brand | CIF |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | VGB-P |
| Instrument Category | Domestic Plasma Surface Treater |
| RF Frequency | 40 kHz / 13.56 MHz |
| Power Range | 0–500 W |
| Dimensions (L×W×H) | 330 × 490 × 190 mm |
| Chamber Volume | 3.8 L |
| Chamber Material | Stainless Steel (AISI 304) |
| Gas Inlets | 2 Independent Mass Flow-Controlled Channels |
| Control Mode | Manual Knob Adjustment + Programmable Auto-Mode with Preset Sequencing |
| Brand | Cilabs |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | In-Situ FTIR Characterization System with High-Vacuum Chamber and Transmission Quartz Cell |
| Pricing | Upon Request |
| Brand | Cilas |
|---|---|
| Power Rating | 500W / 350W / 150W |
| Lamp Type | Spherical Quartz Mercury Vapor Arc Lamp |
| Operating Voltage | 220–240 V AC, 50/60 Hz |
| Arc Gap | ≤ 2.5 mm |
| UV Output Spectrum | 254 nm (strong line), 365 nm (main UVA peak), 405 nm, 436 nm, 546 nm, 578 nm |
| Envelope Material | Fused Silica (UV-Grade Quartz) |
| Cooling Requirement | Forced-air or water-cooled (model-dependent) |
| Lifetime | ≥ 1,000 hours (at rated power, proper cooling) |
| Compliance | IEC 62471 (Photobiological Safety), RoHS 2011/65/EU |
| Brand | Ciltech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | CEL-HPR100 |
| Capacity | 100 mL |
| Working Pressure | Up to 3.0 MPa |
| Material | Stainless Steel with PTFE Coating |
| Optical Window Material | Synthetic Fused Quartz (180–1100 nm transmission) |
| Sealing Type | Threaded Seal |
| Heating/Cooling | Integrated Embedded Heater + External Jacket Compatibility |
| Stirring | Magnetic Coupling Drive |
| Vacuum Level | ≤ 6.5 × 10⁻³ Pa (standard), optional down to 3.5 × 10⁻³ Pa |
| Interface Options | 4–8 Standard High-Pressure Ports (e.g., Swagelok® 1/4″ VCR) |
| Brand | CINC (Germany) |
|---|---|
| Origin | Germany |
| Model | V02 / CS50 |
| Construction Material Options | AISI 316L stainless steel, Hastelloy C-276 |
| Flow Rate Range | 0–4000 L/h (lab rental unit), up to 30,000 L/h (industrial scale) |
| Operating Principle | Continuous annular-gap mixing + high-G centrifugal phase separation |
| Max Centrifugal Force | ≥1,000 × g |
| Compliance | ATEX Category 1D/2D (Zone 21/22), cGMP-compliant surface finish (Ra ≤ 0.4 µm), FDA 21 CFR Part 11–ready software architecture |
| Cleaning & Sterilization | Integrated CIP (Clean-in-Place) and SIP (Steam-in-Place) capability |
| Modular Configuration | Single-stage (1 theoretical plate) or multi-stage counter-current/cross-flow cascade (up to 5+ stages) |
| Temperature Control | Optional jacketed housing with heating/cooling utility connections |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | CK-1 |
| Dimensions | 60 × 60 × 8 mm (W × D × H) |
| Weight | 55 g |
| Material | Borosilicate Glass Base, Silicone Rubber Gasket, Stainless Steel Clamping Fixture |
| Accessories Included | 100 pcs Glass Coverslips, Silicone Grease, Silicone Rubber Gasket |
| Brand | Claisse |
|---|---|
| Origin | Canada |
| Model | LeDoser-12 |
| Dimensions (L×W×D) | 51×51×46 cm |
| Weighing Precision | 0.0001 g |
| Operating Ambient Temperature | 25 °C |
| Throughput | 40–100 samples/hour |
| Compliance | CE, CSA, UL 94, RoHS |
| Power Supply | 100–240 VAC, 50/60 Hz, 100 VA, Single-phase |
| Weight | 19 kg |
| Brand | Claisse |
|---|---|
| Origin | Canada |
| Model | LEDOSER-12 |
| Dimensions (L×W×D) | 50.5 × 50.5 × 30.5 cm |
| Weight | 19 kg |
| Power Supply | 100–240 VAC, 1 A, 50/60 Hz, 100 VA |
| Safety Certifications | CE, CSA, UL 94, RoHS |
| Software Storage | 4 GB CompactFlash |
| Interface | Touchscreen GUI, dual USB ports, integrated barcode reader |
| Connectivity | LIMS-compatible data export (CSV/ASCII), optional sample tracking module |
| Weighing Capacity | Industrial-grade precision balance (specification not disclosed |
| Throughput | >250 samples per session |
| Positioning | 12-position dual rotating carousel (2 × 6) |
| Operating Environment | Lab-grade ambient conditions (no active temperature control required) |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Canada |
| Manufacturer | Claisse (a Malvern Panalytical company) |
| Instrument Type | Automated Flux Fusion System |
| Compliance | Designed for ISO/IEC 17025, ASTM E2627, ASTM D5630, USP <731>, and GLP/GMP environments |
| Certifications | CE, CSA, UL listed |
| Operating Modes | Fully automated electronic + gas-controlled fusion, programmable ramp/hold thermal profiles |
| Crucible Capacity | Supports Pt/Au, Pt/Rh, and graphite crucibles (standard 30–50 mL) |
| Maximum Temperature | Up to 1200 °C (LeNeo/TheOx), 1100 °C (Eagon 2), 1050 °C (M4) |
| Gas Compatibility | Argon, nitrogen, air, or custom mixed atmospheres (optional mass flow controller) |
| Safety | Integrated fume extraction interface, overtemperature cut-off, door interlock, real-time CO/NOₓ monitoring (optional) |
| Connectivity | Ethernet, RS-232, USB |
| Brand | Claisse |
|---|---|
| Origin | Canada |
| Model | LeNeo |
| Dimensions (L×W×D) | 53 × 58 × 55 cm |
| Temperature Control Accuracy | ±1 °C |
| Maximum Operating Temperature | 1250 °C |
| Sample Throughput | 4–5 samples per hour |
| Temperature Sensing | R-type thermocouple (furnace cavity) + N-type thermocouple (insulation layer monitoring) |
| Heating Technology | Advanced resistive heating system |
| Application Scope | XRF fused bead preparation, AA/ICP solution digestion support, wet chemistry sample dissolution |
| Brand | Claisse |
|---|---|
| Origin | Canada |
| Model | CLAISSE M4 |
| Temperature Control Accuracy | ±1 °C |
| Maximum Operating Temperature | 1250 °C |
| Sample Throughput | 12–15 samples/h |
| Dimensions (L×W×D) | 49×41×52 cm |
| Weight | 23 kg |
| Power Supply | 100/115/230 VAC, 100 W, 50/60 Hz |
| Fuel | Propane, Natural Gas or LPG |
| Fuel Input Pressure | 9±1 PSI (62±7 kPa) |
| Burner Count | 3 |
| Max. Heat Output | 98,000 BTU/h (29 kW/h) |
| Cooling | External Recirculating Water System |
| Programmable Parameters | Temperature, Rotation Speed, Tilt Angle, Cooling Duration |
| User Programs | 10 Customizable Methods |
| Data Logging Capacity | 1000 Sample Records |
| Crucible Compatibility | Lightweight Pt-Au (26–30 g) |
| Compliance | CSA, CE |
| Brand | Claisse |
|---|---|
| Origin | Canada |
| Model | CLAISSE rFUSION |
| Price | USD 350,000 |
| Dimensions (L×W×D) | 213 × 195 × 190 cm × 2 units |
| Temperature Control Accuracy | ±1 °C |
| Maximum Operating Temperature | 1250 °C |
| Throughput | 24–30 samples/h |
| Brand | CLEAN |
|---|---|
| Origin | Taiwan |
| Model | MD110 |
| Stirring Volume | 1 L (max) |
| Speed Range | 60–2000 rpm |
| Control | Digital LCD Display |
| Drive System | Four-Pole Electromagnetic Coil |
| Plate Material | PET Surface |
| Housing Material | PA+GF |
| Dimensions (W×D×H) | 11 × 169 × 109 mm |
| Weight | 0.3 kg |
| Max Load Capacity | 1.5 kg |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −10 to +70 °C |
| Relative Humidity | ≤85% RH |
| Protection Rating | IP65 (per EN 61010 & EN 61326) |
| Power Input | 100–240 VAC, 50–60 Hz |
| Output | 12 VDC |
| Power Consumption | 5 W |
| Compliance | CE-marked, EMI/EMC compliant for electrochemical measurement environments |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert M96 |
| Type | 96-Well Plate-Based Solid-Phase Extraction (SPE) and Protein Precipitation Platform |
| Configuration | Benchtop, Vacuum-Driven or Positive-Pressure Assisted |
| Intended Use | High-Throughput Biological Sample Cleanup Prior to LC-MS, HPLC, or ELISA Analysis |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | CM-12 |
| Price | USD 1,280 (FOB Beijing) |
| Heating Method | Precision Water Bath |
| Temperature Range | Ambient +5 °C to 99 °C |
| Temperature Stability | ±0.5 °C at 60 °C |
| Temperature Uniformity | ≤±0.5 °C @ 60 °C |
| Display Resolution | 0.1 °C |
| Ramp Time (40→99 °C) | ≤30 min |
| Sample Capacity | 12 positions |
| Compatible Tube Diameter | 10–29 mm |
| Liquid Volume per Vial | 1–50 mL |
| Gas Flow Range | 0–15 L/min (adjustable per channel) |
| Max. Gas Pressure | 0.2 MPa |
| Gas Inlet Connector | φ7 mm OD |
| Needle Length | 100 mm (standard), adjustable vertical travel: 200 mm |
| Bath Dimensions | Ø260 × 150 mm (W×D×H) |
| Unit Dimensions (L×W×H) | 390 × 300 × 850 mm |
| Weight | 9.5 kg |
| Heating Power | 1000 W |
| Fuse | 250 V, 8 A, φ5 × 20 mm |
| Material Compatibility | Full stainless steel (304) bath, SMC silicone tubing (food-grade, solvent-resistant), anodized aluminum frame |
| Safety Features | Dry-run prevention with thermal cutoff and audible/visual alarm |
| Ventilation Requirement | Compatible with fume hood installation for volatile or toxic solvents |
| Brand | Chengmeng Technology |
|---|---|
| Origin | Beijing, China |
| Model | CM-30LB |
| Output Flow | 0–30 L/min |
| Output Pressure | 116 psi (adjustable) |
| Nitrogen Purity | 95–99.9% |
| Dew Point | −10°C |
| Particle Size Limit | <0.01 µm |
| Total Power | 1.3 kW |
| Noise Level | ≤58 dB(A) |
| Dimensions (L×W×H) | 800×500×750 mm |
| Weight | 130 kg |
| Input Power | 220 V ±10%, 50 Hz |
| Operating Ambient | Temp ≤30°C, RH ≤60% |
| Brand | Chengmeng Weiye |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CM200-2 |
| Heating Method | Dry-Block Heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Stability | ±0.5°C at 100°C |
| Temperature Accuracy | ±0.5°C (40–100°C), ±1°C (100–150°C) |
| Sample Capacity | 24 positions |
| Tube Diameter Compatibility | Up to 15 mm |
| Nitrogen Flow Rate | 0–10 L/min |
| Maximum Power Consumption | 400 W |
| Heating Block Material | Aluminum Alloy with Anodized Surface |
| Time Setting Range | 0–99 h 59 min |
| Safety Features | Over-Temperature Protection, Auto Fault Detection & Audible Alarm |
| Display | Dual LED Display (Real-Time Temperature + Countdown Timer) |
| Dimensions (W×D×H) | 280 × 240 × 500 mm |
| Weight | Approx. 8.2 kg |
| Brand | CME (China Education Goldsource) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (PRC) |
| Model Options | 10W, 20W, 120W |
| Pricing | Available Upon Request |
| Brand | CNI (China Education Goldsource) |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | REF-SC-2x2-M |
| Calibration | NREL-traceable certificate included |
| Irradiance Range | 0–3.500 sun (1 sun = 1000 W/m², AM1.5G, 25 °C) |
| Irradiance Accuracy | ±0.1% at 1.0000 sun (23 °C), ±0.2% + 2 counts elsewhere |
| Temperature Range | 0–199.9 °C |
| Temp Accuracy | ±0.5 °C typical (24–26 °C), ±1.2 °C max (10–40 °C) |
| Analog Outputs | 1 V/sun (irradiance), 10 mV/°C (temperature) |
| Dimensions | 151 × 95 × 178 mm |
| Weight | 1.8 kg |
| Operating Environment | 10–40 °C, 0–90% RH non-condensing |
| Brand | Cnonline |
|---|---|
| Model | CC-III |
| Type | Benchtop Laboratory Bottle Washer |
| Construction Materials | Stainless Steel (316L) or Polypropylene (PP) |
| Water Consumption | ≤2.5 L/cycle (typical for standard glassware load) |
| Power Supply | 220 V, 50 Hz |
| Cycle Time | 25–45 min (programmable) |
| Chamber Volume | 38 L |
| Max. Temperature | 93 °C |
| Compliance | ISO 15883-1, EN 13060, GLP-compliant data logging capability |
| Software | Embedded microprocessor controller with 8 pre-programmed cycles and user-defined protocol storage |
| Filtration System | Dual-stage (5 µm + activated carbon) recirculating water filter |
| Noise Level | ≤52 dB(A) at 1 m |
| Dimensions (W×D×H) | 580 × 520 × 620 mm |
| Weight | 48 kg |
| Brand | Cnonline |
|---|---|
| Origin | Hunan, China |
| Model | FS-II |
| Application | Hazardous Laboratory Wastewater Treatment |
| Compliance Standards | GB 8978, GB 18466-2005, GB 18918-2002, GB 21907-2008 |
| Core Processes | pH-adjusted chemical dosing, Fenton oxidation, coagulation-flocculation, sedimentation, micro-electrolysis, membrane filtration (MF/UF/RO), chlorination disinfection |
| Target Contaminants | Heavy metals (Cu²⁺, Cr⁶⁺, Cd²⁺, Pb²⁺, As³⁺/⁵⁺), phenols, cyanides, organic acids, suspended solids, colloids |
| Brand | Cnonline |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Domestic (China) |
| Model | ST-01 |
| Price Range | USD 56,000 – 70,000 (FOB) |
| Waste Category | Solid Hazardous Waste |
| Applicable Sectors | Academic & Industrial Laboratories, Healthcare Facilities, Chemical Manufacturing Plants |
| Storage Principle | Controlled Interim Containment |
| Total Storage Capacity | 1600 L |
| Regulatory Compliance | GB 18597–2023, GB 15562.2–1995, HJ 2025–2012 |
| Brand | Cnonline |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ST-1 |
| Application Category | Research-Grade Glove Box |
| Chamber Material | 304 Stainless Steel |
| Dimensions (L×W×H) | 1200 × 640 × 1000 mm |
| Chamber Volume | 630 L |
| Antechamber Volume | 23 L |
| Number of Gloves | 1 pair |
| H₂O Content | <1 ppm |
| O₂ Content | <1 ppm |
| Leakage Rate | <0.05 vol%/h |
| Temperature Range | +4 to 42 °C |
| Relative Humidity Range | 35–100 %RH |
| Glove Material | Imported Butyl Rubber |
| Glove Diameter | 200 mm |
| Glove Thickness | 0.4 mm |
| Control Interface | Chinese-language HMI with intuitive human-machine interaction |
| Brand | Coevos |
|---|---|
| Model | IDP C |
| Origin | Beijing, China |
| Type | Single-Channel Electronic Pipette |
| Volume Range | 10 µL – 5 mL |
| Accuracy | ±1% (at nominal volume) |
| Precision (CV) | ≤0.6% (at 5 mL), ≤1.05% (at 50 µL) |
| Power | Rechargeable Li-ion battery with USB-C interface |
| Display | High-resolution monochrome LCD with real-time parameter feedback |
| Ergonomics | Weight: ~95 g (IDP C-5000), balanced center of gravity, soft-grip elastomeric sleeve |
| Control | Five-way tactile joystick with silicone dome |
| Tip Ejection | Intelligent capacitive touch button with auto-reset and tip-count tracking |
| Tip Compatibility | Universal fit for ISO 8655-compliant standard conical tips (including Gilson, Eppendorf, Thermo Fisher, and Rainin) |
| Certifications | Complies with ISO 8655-2:2022 (volumetric performance), ISO 8655-5:2022 (electronic pipettes), and supports GLP/GMP traceability via audit-log-enabled firmware |
| Software Integration | Co-AICal™ intelligent calibration algorithm (Chinese Invention Patent ZL202210XXXXXX.X), OTA firmware updates, WeChat Mini Program remote configuration |
| Brand | Coevos |
|---|---|
| Origin | Beijing, China |
| Model | IDP X 4-Channel |
| Type | Multi-Channel Electronic Pipette |
| Channels | 4 |
| Volume Range | 125–1250 µL |
| Maximum Capacity | 1250 µL |
| Automation Level | Motorized |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Software Integration | Co-Link™ bidirectional communication protocol |
| Calibration | Auto-initialization of well spacing on power-up |
| Display | Integrated capacitive touchscreen interface |
| Ergonomics | Rotatable lower tip carriage with vibration-free spacing adjustment |
| Predefined Configurations | Three factory-set plate formats (96-, 384-, and 24-well) |
| Tip Compatibility | Universal low-retention filtered tips (0.1–1 mL range) |
| Data Traceability | On-device operation log with timestamped parameter history |
| Brand | Coevos |
|---|---|
| Origin | Beijing, China |
| Model | IDP X (8/12-Channel, Adjustable Spacing) |
| Type | Electric Multichannel Pipette |
| Channels | 8 or 12 |
| Volume Range | 12.5–1250 µL |
| Maximum Capacity | 1250 µL |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Software Integration | Co-Link™ bidirectional communication protocol |
| Calibration | Auto-alignment on startup, 14-point calibration support |
| Display | High-resolution capacitive touchscreen interface |
| Ergonomics | Rotatable lower tip carriage, vibration-free spacing adjustment |
| Plate Compatibility | 384-well (4.5 mm), 96-well (9 mm), 48-well (13 mm), 24-well (19 mm), 12-well (26 mm) plates |
| Brand | Coevos |
|---|---|
| Origin | Beijing, China |
| Model | IDP X 6-Channel |
| Instrument Type | Electronic Multichannel Pipette |
| Channels | 6 |
| Volume Range | 125–1250 µL |
| Maximum Capacity | 1250 µL |
| Automation Level | Motorized |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Software Integration | Co-Link™ bidirectional communication protocol |
| Calibration | Auto-alignment on startup, 14-point calibration support |
| Display | Integrated capacitive touchscreen interface |
| Ergonomics | Rotatable lower tip carriage, vibration-free spacing adjustment |
| Certified Compatibility | ANSI/SLAS standards for microplate formats (96-, 384-, 48-, 24-, and 12-well plates) |
| Brand | COEVOS |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | IDP-E 12-Channel |
| Instrument Type | Multichannel Electronic Pipette |
| Automation Level | Motorized |
| Number of Channels | 12 |
| Volume Range | 12.5–1250 µL |
| Maximum Capacity | 1250 µL |
| Brand | Coevos |
|---|---|
| Model | IDP-E 8-Channel |
| Type | Electronic Multichannel Pipette |
| Automation Level | Motorized |
| Channels | 8 |
| Volume Range | 0.5–1250 µL |
| Maximum Volume | 1250 µL |
| Calibration Method | 14-Point Co-AlCal™ Intelligent Calibration |
| Drive Mechanism | Precision Stepper Motor with Pneumatic Screw Actuation |
| Durability | >2,000,000 Actuation Cycles |
| Data Logging | Onboard Timestamped Operation Records (Volume, Mode, User ID, Date/Time) |
| Connectivity | USB-C for Firmware Updates and Parameter Sync |
| Compliance | Designed to Support GLP/GMP Traceability Requirements (Audit Trail Ready) |