Flue Gas and Particulate Sampler
Filter
Showing 31–60 of 61 results
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHK1052 |
| Instrument Type | Flue Gas Sampling System |
| Target Analytes | SO₂, NOₓ, and other combustion gases |
| Flow Accuracy | ±1% FS |
| Sampling Flow Rate | 1.5 L/min |
| Flue Gas Throughput Capacity | >2 L/min |
| Moisture Removal Efficiency | ≤4 °C dew point output (at 25 °C ambient, 1 L/min gas flow) |
| Heating Gun Setpoint Range | 20–120 °C (adjustable, 0.1 °C resolution, ±2 °C accuracy) |
| Refrigeration Setpoint Range | 0–10 °C (adjustable, 0.1 °C resolution, ±2 °C accuracy) |
| Inlet Gas Temperature Limit | ≤150 °C |
| Compressor Cooling Capacity | 470 W |
| Heating Time (20→120 °C) | ≤6 min |
| Cooling Time (25→2 °C) | ≤6 min |
| Sample Probe Length | 1 m (customizable) |
| Heated Tubing Length | 2 m (customizable) |
| Probe Material | 304 stainless steel |
| Filtration | Removable 0.1 µm PTFE filter |
| Gas Path Material | Entirely PTFE (no metal contact) |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Power Consumption | ≤300 W |
| Operating Ambient Temperature | −20 to +55 °C |
| Host Dimensions (L×W×H) | 32 × 21 × 20 cm |
| Host Weight | <6.5 kg |
| Noise Level | ≤55 dB(A) |
| Brand | ISAP |
|---|---|
| Origin | Germany |
| Model | ISAP LCPI |
| Flow Accuracy | ±2% |
| Sampling Flow Rate | 5–60 LPM |
| Temperature Range | −50 to +310 °C |
| Cut-Point Range | 20.0 µm to 1 nm |
| Stages | Up to 11 stages (13 size fractions) or 6 stages (8 size fractions) |
| Impactor Type | PILAT/BERNER design |
| Material | Acid-resistant alloys |
| Sampling Mode | Isokinetic or constant-flow |
| Backup Filter Stage | Optional 0.001 µm (1 nm) stage |
| Collison Disk Diameter | 70 mm OD / 30 mm ID |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | ZR-3220 |
| Instrument Category | Flue Gas Sampler |
| Measured Gases | SO₂, NO, NO₂, O₂, CO, H₂S, CO₂ |
| Flow Accuracy | ±5% |
| Sampling Flow Rate | 1.0 L/min |
| Flue Gas Velocity Range | 1–45 m/s |
| Maximum Moisture Content Tolerance | 40% (v/v) |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | ZR-3260D |
| Instrument Type | Flue Gas and Particulate Sampler |
| Sampled Gases | SO₂, NO, NO₂, NOₓ, CO, CO₂, H₂S, O₂ |
| Sampling Flow Rate | Up to 80 L/min |
| Flow Accuracy | ±2% FS (typical for integrated electronic mass flow control) |
| Flue Gas Velocity Range | 1–30 m/s (with S-type Pitot tube) |
| Moisture Content Measurement | Integrated capacitive humidity sensor or optional resistive-capacitive (RHC) probe |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | ZR-3260E |
| Instrument Type | Flue Gas and Particulate Sampler |
| Measured Gases | SO₂, NO, NO₂, NOₓ, CO, CO₂, H₂S, O₂ |
| Sampling Flow Rate | Not specified |
| Flow Accuracy | Not specified |
| Flue Gas Velocity | Not specified |
| Moisture Content Measurement | Not specified |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | ZR-3712 |
| Instrument Type | Flue Gas Sampler |
| Sample Type | Flue Gas |
| Flow Accuracy | ±2.0% |
| Sampling Flow Rate | 0.2–1.5 L/min |
| Flue Gas Velocity Range | 0.2–1.5 L/min |
| Moisture Content Measurement Range | 0–85% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZR-3714 |
| Price Range | USD 7,000–14,000 (FOB) |
| Instrument Type | Flue Gas Sampler |
| Sample Targets | Benzene Homologues, Aldehydes & Ketones, Halogenated Hydrocarbons (VOCs) |
| Flow Accuracy | ±2.5% |
| Sampling Flow Rate | 10–200 mL/min |
| Flue Gas Velocity Range | 10–200 mL/min |
| Moisture Content Measurement Range | 0–85% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZR-3721 |
| Instrument Type | Flue Gas Heavy Metal Sampler |
| Target Analytes | Hg, Sb, As, Ba, Be, Cd, Cr, Co, Cu, Pb, Mn, Ni, P, Se, Ag, Tl, Zn |
| Flow Accuracy | ±2.5% |
| Sampling Flow Rate | 10–60 L/min |
| Flue Gas Velocity Range | 1–45 m/s |
| Moisture Content Handling | Up to 20% w/w |
| Sampling Medium | Quartz or Teflon-coated Filter Cartridge + Titanium Probe Assembly |
| Heating Control | Integrated Constant-Temperature Heating for Entire Sampling Train |
| Data Storage | USB Mass Storage Support (U-disk Export) |
| Display | 5.6-inch Color Touchscreen with Chinese UI |
| Pump | Imported Rotary Vane Vacuum Pump (Industrial-Grade, Maintenance-Free) |
| Leak Detection | Automated Positive-Pressure Air-Tightness Verification |
| Power Failure Recovery | Auto-Save & Resume Functionality |
| Isokinetic Sampling Capability | Yes |
| Compliance Framework | Designed in alignment with EPA Method 29, ISO 14883-2, and GB/T 16157–1996 (Chinese National Standard for Stationary Source Emission Monitoring) |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | D09QT |
| Pricing | Available Upon Request |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZR-D09QT |
| Instrument Type | Flue Gas and Particulate Sampler |
| Sample Type | Stack Emission Particulates |
| Flow Accuracy | ±2.5% |
| Sampling Flow Rate | 0–50 L/min |
| Flue Gas Velocity Range | up to 30 m/s |
| Moisture Content Measurement Range | 10–90% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZR-D09U |
| Instrument Category | Particulate Matter Sampler |
| Sampled Gases | SO₂, NOₓ |
| Flow Accuracy | ±2.5% |
| Sampling Flow Rate | 5–100 L/min |
| Flue Gas Velocity Range | 1–45 m/s |
| Moisture Content Range | 0–95% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZR-D11A |
| Instrument Type | Flue Gas Sampler |
| Target Analyte | Gaseous Total Mercury |
| Flow Accuracy | ±5% |
| Sampling Flow Rate | 1 mL/min |
| Flue Gas Velocity Equivalent | 1 mL/min |
| Moisture Content Range | 0–85% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | ZR-D13E |
| Instrument Category | Flue Gas Sampling System |
| Sample Medium | Water Vapor |
| Flow Accuracy | ±2% |
| Sampling Flow Velocity | 10 m/s |
| Flue Gas Velocity Range | 10 m/s |
| Moisture Content Range | 0–40 vol% |
| Brand | Junray |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZR-D25A |
| Instrument Type | Flue Gas Sampler |
| Sample Types | Particulate Matter (PM), Flue Gas, Moisture Content, Flow Velocity, Flue Gas Temperature |
| Flow Accuracy | ±2% |
| Sampling Flow Rates | 10–200 mL/min or 0.2–1.5 L/min |
| Flue Gas Velocity Range | 1–45 m/s |
| Moisture Content Range | 0–40 vol% |
| Brand | Junray |
|---|---|
| Model | ZR-D35 |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Flue Gas and Particulate Sampler |
| Sample Target | Condensable Particulate Matter (CPM) |
| Compliance Standard | EPA Method 202 (Dry Impactor Condensation Method) |
| Brand | Loobo |
|---|---|
| Origin | Shandong, China |
| Model | LB-2 |
| Instrument Type | Flue Gas Sampler |
| Sample Medium | Flue Gas |
| Flow Accuracy | ±5% |
| Adjustable Sampling Flow Rate | 0.5–2.0 L/min |
| Pre-Flow Pressure Range | −30 to 0 kPa |
| Pre-Flow Temperature Range | −30 to +99 °C |
| Atmospheric Pressure Measurement Range | 70–130 kPa |
| Data Storage Capacity | 1000 sets |
| Operating Temperature | −30 to +50 °C |
| Dimensions (L×W×H) | 225 × 160 × 280 mm |
| Weight | ~3 kg |
| Power Supply | AC 220 V ±10%, 50 Hz or DC 12 V |
| Power Consumption | <20 W |
| Brand | Senbe |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YQ3000-E |
| Instrument Type | Flue Gas Dioxin Sampler |
| Sample Medium | Flue Gas |
| Flow Accuracy | ±5% |
| Sampling Flow Rate | 1.5 L/min |
| Flue Gas Velocity Range | Up to 4 m/s |
| Moisture Content Tolerance | Up to 60% (v/v) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SMG200M |
| Instrument Type | Flue Gas and Particulate Sampler |
| Sample Media | Flue Dust, Exhaust Gases |
| Flow Accuracy | ±3% |
| Sampling Flow Rate | 0.88 NL/min |
| Flue Gas Velocity Range | 2.88 NL/min |
| Moisture Content Tolerance | ≤1% |
| Particle Size Detection Range | 0.04–10 µm |
| Max. Measurable Mass Concentration | 250 mg/m³ |
| Max. Medium Temperature | 500 °C |
| Max. Dew Point Measurement | 80 °C |
| Brand | Testo |
|---|---|
| Origin | Germany |
| Model | Testo 3008 |
| Operating Temperature Range (Flue Gas Probe) | 0–400 °C (extendable to 800 °C) |
| Dynamic Pressure Range | 0–1500 Pa (±1.5 %) |
| Static Pressure Range | −30 to +30 kPa (±3.0 %) |
| Total Pressure Range | −30 to +30 kPa (±3.0 %) |
| Pre-meter Pressure Range | −30 to +30 kPa (±2.5 %) |
| Wet-Bulb Pressure Range | −30 to +30 kPa (±3.0 %) |
| Pre-meter Temperature | −30 to +50 °C (±1.5 °C) |
| Host Temperature | −30 to +50 °C (±1.5 °C) |
| Dry-Bulb Temperature | 0–150 °C (±1.5 °C) |
| Wet-Bulb Temperature | 0–150 °C (±1.5 °C) |
| Flue Gas Temperature | 0–400 °C (±3.0 °C |
| Volumetric Flow Rate | 5–50 L/min (±2.5 %) |
| Isokinetic Flow Tracking Accuracy | ±5 %, response time < 8 s |
| Sampling Time Range | 0–999 min 59 s (±1.0 ‰) |
| Accumulated Sample Volume | 0–999999 L (±2.5 %) |
| Moisture Content | 0–45 % (±5.0 %) |
| Dimensions (L×W×H) | 430 × 200 × 370 mm |
| Weight | 11.5 kg |
| Power Supply | AC 220 V ± 22 V, 50 Hz |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | TH-210 |
| Price Range | USD 140–2,800 |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-220 |
| Display | 4.3-inch color touchscreen |
| Power Supply | 8.4 V rechargeable lithium battery |
| Data Storage | Up to 500 records |
| Output | Built-in thermal printer |
| Measurement Parameters | Dynamic pressure, static pressure, temperature, flue gas velocity, actual volumetric flow rate, dry standard volumetric flow rate |
| Compliance | Designed for field use in industrial stack testing per Chinese EPA guidelines (HJ/T 48–1999, HJ/T 397–2007) |
| Enclosure Rating | IP54 |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-230 |
| Measurement Principle | Capacitive-Resistive (Capacitance & Resistance Hybrid) Sensor Technology |
| Display | 7-inch capacitive touchscreen with hex-grid real-time data layout |
| Data Storage | Internal non-volatile memory (≥10,000 records) |
| Operating Temperature Range | -20 °C to +60 °C |
| Protection Rating | IP54 |
| Power Supply | Rechargeable Li-ion battery (≥8 h continuous operation) |
| Gas Compatibility | Flue gas, stack emissions, ambient air, industrial process streams |
| Compliance | Meets GB/T 16157–1996, HJ/T 397–2007, and ISO 12141:2021 (Humidity measurement in hot, wet, and dusty gas streams) |
| Brand | Tianhong |
|---|---|
| Model | TH-880F |
| Origin | Hubei, China |
| Compliance | GB/T 16157–1996, HJ/T 47–1999, HJ/T 48–1999, Q/WTH32–2014 |
| Data Storage | 45,000+ records (onboard eMMC + removable SD card) |
| Sampling Control | Real-time dynamic flow tracking & constant-flow mode |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Operating Temperature | –20 °C to +50 °C |
| Display | Rotatable wide-temperature LCD (180° tilt in both pitch and yaw) |
| Input Method | T9-based simplified Chinese pinyin |
| Gas Sensor Expansion | Optional OEM electrochemical sensors for O₂, SO₂, NOₓ, CO, etc. |
| Protection Features | Reverse-suction prevention, over-pressure alarm, low-flow cutoff, power-fail resume, system parameter backup/restore |
| Data Export | USB interface with Windows-style directory structure (YYYY/MM/DD) |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TH-880W |
| Instrument Type | Flue Gas and Particulate Sampler |
| Sampled Gases | SO₂, NO₂, NO |
| Flow Accuracy | ±2% |
| Sampling Flow Rate | 5–60 L/min |
| Flue Gas Velocity Range | 5–60 L/min |
| Moisture Content Handling | Integrated Multi-Stage Condensation Dehydration System (≥70% Efficiency) |
| Brand | Tianhong |
|---|---|
| Model | TH-880W (Wireless) |
| Origin | Hubei, China |
| Compliance | GB/T 16157–1996, HJ/T 47–1999, HJ/T 48–1999, Q/WTH 06–2013 |
| Wireless Control Range | ~100 m |
| Power Consumption | <70 W |
| Data Storage Capacity | >100,000 records |
| Sensor Interface | Up to 8 electrochemical gas sensors (4 standard, 4 expandable) |
| Flow Measurement | V-cone differential pressure flow sensor |
| Moisture Removal | Multi-stage condensation dehydration unit (≥70% efficiency) |
| Operating Modes | AC/DC dual power supply |
| EMC/EMI Compliance | Yes |
| GPS Integration | Built-in geotagging support |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-9300 |
| Instrument Type | Flue Gas Mercury Sampler |
| Sampling Flow Rate | 0–2.0 L/min |
| Flow Accuracy | ±2% |
| Flue Gas Velocity Range | 5–40 m/s |
| Compliance | EPA Method 30B, HJ/T 374–2007, Q/WTH 19–2014 |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TH-D47 |
| Price Range | USD 1,400 – 2,800 |
| Application | Flue Gas Particulate Sampling at Concentrations < 50 mg/m³ |
| Operating Environment | High-Humidity Flue Gas Streams |
| Sampling Principle | Isokinetic Probe with Integrated Pre-Weighed Membrane Filter Cartridge |
| Weight of Probe Head | < 20 g |
| Gravimetric Compatibility | Compatible with 0.1 mg (100 µg) Analytical Balances |
| Available Nozzle Diameters | 4 mm, 6 mm, 8 mm, 10 mm |
| Filter Medium | PTFE or Quartz Fiber Membrane (Standard 47 mm Diameter) |
| Brand | Tianhong |
|---|---|
| Model | TH-J2 |
| Application | Pressure & Flow Calibration for Flue Gas and Particulate Samplers |
| Compliance | JJG 875–2005 (Digital Pressure Gauges), JJG 577–2005 (Diaphragm-type Gas Meters), Q/WTH42–2013 (Enterprise Standard) |
| Display | 320 × 240 Graphic LCD |
| Pressure Generation | Integrated Electronic Pressure Pump + External Motorized Micro-Pressure Generator |
| Flow Measurement | Dry-type Cumulative Flowmeter with Photoelectric Sensor |
| Data Logging | Up to 7 Calibration Points per Set |
| Accuracy Class | Certified per JJG 875–2005 |
| Power Supply | AC/DC Dual Mode |
| Operating Environment | Designed for Field Use in Environmental Monitoring, Epidemic Prevention, Industrial QA/QC, and Research Laboratories |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-J3 |
| Compliance | JJG 577–2005 (Diaphragm Gas Meter Verification Regulation), Q/WTH42–2013 (Enterprise Standard for TH-J Series Pressure-Flow Calibrators) |
| Power | Rechargeable Lithium Battery (20 h continuous operation) |
| Display | High-Brightness Chinese Character OLED |
| Data Storage | 20 measurement records |
| Environmental Sensors | Integrated barometric pressure & ambient temperature measurement |
| Dimensions & Portability | Compact, lightweight, field-deployable design |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | XC-572 |
| Price Range | USD 13,500 – 40,500 |