Gas Detector
Filter
Showing 811–840 of 2758 results
| Brand | Envea |
|---|---|
| Origin | France |
| Model | MIR-FT/P |
| Measurement Principle | Fourier Transform Infrared Spectroscopy (FTIR) |
| Detectable Gases | HCl, NO, NO₂ (NOₓ), CO, CO₂, CH₄ (TOC), SO₂, HC, NH₃, HF, H₂O |
| Response Time | <60 s (gas-dependent) |
| Repeatability | ±2% FS |
| Interferometer Resolution | 8 cm⁻¹ |
| Multi-pass Cell Path Length | 5 m |
| Operating Temperature | +10 °C to +35 °C |
| Dimensions | 616 × 483 × 220 mm (L×W×H) |
| Weight | ~20 kg |
| Power Supply | 220 V ±15%, 50–60 Hz, 200 VA |
| Brand | Environics |
|---|---|
| Origin | USA |
| Model | 4000 Series |
| Dilution Ratio | Up to 10,000:1 |
| Concentration Range | % to ppb |
| Flow Accuracy | ±1.0% of setpoint (concentration & flow) |
| Flow Repeatability | ±0.05% |
| Warm-up Time | 30 min |
| Gas Connection | 1/4" Swagelok® or compatible |
| Operating Pressure | 10–75 psig (0.67–5.04 bar) |
| UHP Leak Rate | ≤1×10⁻⁹ atm·cm³/sec He |
| Humidity Range (optional) | 0–95% RH (±5% accuracy, NIST-traceable) |
| Heating | Optional heated gas pathways (temperature-controlled) |
| Surface Treatment | Optional silanized stainless-steel tubing |
| Purge Pathway | Integrated electromagnetic valve purge system |
| Permeation Oven | Optional multi-zone permeation furnace with dual-permeation-tube capacity |
| Brand | Environics |
|---|---|
| Origin | USA |
| Model | 4040 |
| Dilution Ratio | Up to 10,000:1 |
| Flow Accuracy | ±1.0% of setpoint |
| Concentration Accuracy | ±1.0% of setpoint |
| Flow Repeatability | ±0.05% |
| Dimensions (Portable) | 43.18 cm × 17.78 cm × 38.1 cm |
| Weight | 8.2 kg (2-MFC), 10.4 kg (4-MFC), 15.9 kg (8-MFC) |
| Brand | Environics Oy |
|---|---|
| Origin | Finland |
| Model | S4000 / S4040 |
| Concentration Accuracy | ±1.0% of setpoint |
| Repeatability | ±1.0% |
| Max Operating Pressure | 75 psig (recommended: 25 psig) |
| Dilution Ratio | Up to 10,000:1 (S4040) |
| Gas Inputs | 4 (S4000) / 6 sample + 1 diluent (S4040) |
| Control Interface | RS-232, Windows-based software |
| Origin | Australia |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Environodour |
| Pricing | Available Upon Request |
| Brand | Eranntex |
|---|---|
| Model | DOAS-2000 |
| Detection Principle | UV Differential Optical Absorption Spectroscopy (DOAS) |
| Measurement Range | 0–2 to 0–2000 ppm (configurable) |
| Operating Temperature | −40 °C to +600 °C (standard), up to +1300 °C (custom) |
| Sampling Humidity | 0–99% RH |
| Protection Rating | IP66 (outdoor, explosion-proof optional) |
| Sampling Flow Rate | 4 L/min (standard), up to 10 L/min (optional) |
| Data Storage | 16 GB internal (daily folder-based archiving) |
| Output Signals | 4–20 mA, RS485, dry contact outputs |
| Power Supply | 220 VAC, 50 Hz |
| Dimensions | 700 × 430 × 400 mm (H × W × D) |
| Brand | Eranntex |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MIC-500-CL2 |
| Detection Gas | Chlorine (Cl₂) |
| Response Time | T90 ≤ 20 s |
| Accuracy | ≤ ±3% F.S. |
| Measurement Range | Customizable |
| Brand | Eranntex |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MIC-500S-C3H₈ |
| Detection Principle | Electrochemical (configurable for Catalytic Combustion, NDIR, PID, Thermal Conductivity per gas type) |
| Mounting Type | Fixed Online Installation |
| Output | 4–20 mA (3-/4-wire), RS485 Modbus RTU, Relay Outputs (2× SPDT), Optional Wireless (GPRS/WiFi/433 MHz), Ethernet, or Cloud Integration |
| Certifications | Exd IIC T6 Gb (CNEx17.3959), GB15322.1–2019, GB3836.1–2010, GB3836.2–2010, CPA Type Approval |
| IP Rating | IP65 |
| Operating Temperature | −40 °C to +70 °C |
| Humidity Range | 10–95% RH (non-condensing) |
| Display | 1.7″ color LCD (optional remote display via MIC2000 controller) |
| Power Supply | 12–36 VDC (24 VDC nominal, ≥1 A) |
| Dimensions (L×H×W) | 238×210×90 mm (with beacon) / 238×152×90 mm (without beacon) |
| Weight | 1.8 kg |
| Brand | Eranntex |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MIC-500S-CL2 |
| Price Range | USD 700 – 1,400 (FOB Shenzhen) |
| Detection Principle | Electrochemical (standard for Cl₂) |
| Measurement Range | 0–10 ppm (default), configurable up to 0–50,000 ppm |
| Resolution | 0.01 ppm (0–10 ppm), 0.1 ppm (0–1,000 ppm) |
| Accuracy | ≤±3% FS |
| Response Time (T90) | ≤20 s |
| Recovery Time | ≤30 s |
| Output Signals | 4–20 mA (3-wire/4-wire), RS485 Modbus RTU, relay outputs (2 x SPDT) |
| Enclosure Rating | IP65 |
| Explosion Protection | Exd IIC T6 Gb (CNEx17.3959) |
| Operating Temperature | −40 °C to +70 °C |
| Humidity Range | 10–95% RH (non-condensing) |
| Power Supply | 12–36 VDC (24 VDC nominal, 1 A min) |
| Dimensions (L×H×W) | 238 × 210 × 90 mm (with beacon), 238 × 152 × 90 mm (without beacon) |
| Weight | 1.8 kg |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | MIC-500S-NH3 |
| Instrument Type | Online Gas Detector |
| Output Options | 4–20 mA (2-/3-/4-wire), 0–5/0–10 V, RS485 (Modbus RTU), Relay Outputs (2 × SPDT) |
| Certifications | CMC License, Ex d IIB T6 Gb Explosion Protection Certification |
| Communication | Wired (RS485), LAN, Internet, Wireless (433 MHz, GPRS, Wi-Fi, Custom RF up to 5 km) |
| Remote Operation | Infrared remote control (15 m, no-open-cover configuration & calibration) |
| Calibration | Auto-zero tracking, multi-point calibration support, OEM/ODM available |
| Compliance | GB/T 34007–2017, GB 3836.1–2010, GB 3836.2–2010, JJG 555–1996 |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | MS104K-C8H10 |
| Instrument Type | Portable Gas Detector |
| Detection Target | Xylene (C₈H₁₀) |
| Detection Principle | PID (Photoionization Detection), Catalytic Combustion, or Thermal Conductivity (selectable) |
| Detection Range | 0–10 ppm / 0–100 ppm (customizable) |
| Resolution | 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm) |
| Accuracy | ≤±3% FS |
| Response Time (T90) | ≤30 s |
| Recovery Time | ≤30 s |
| Display | 2.31″ 320×240 Color TFT Screen |
| Data Storage | 100,000 entries (real-time, timed, or alarm-triggered) |
| Power Supply | 3.7 V DC, 2100 mAh Rechargeable Polymer Battery |
| Operating Temp. | −40°C to +70°C |
| Humidity Range | 0–95% RH (non-condensing) |
| Temp. Measurement (optional) | −40°C to +70°C, ±0.5°C |
| Humidity Measurement (optional) | 0–100% RH, ±3% RH |
| Protection Rating | IP65 |
| Explosion-Proof Certification | Exia II CT4 Ga |
| Dimensions | 130 × 68 × 34 mm (L×W×H) |
| Weight | 200 g |
| Certifications | CMC (China Metrology Accreditation), GB Standard Compliance |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | MS104K-L-CH2O |
| Instrument Type | Portable |
| Target Gas | Formaldehyde (CH₂O) |
| Response Time | ≤20 s (T90) |
| Measurement Accuracy | ≤±3% FS |
| Measurement Ranges | 0–1, 10, 100, 1,000, 5,000, 10,000, 50,000 ppm |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1,000 ppm), 1 ppm (>1,000 ppm) |
| Detection Principle | Electrochemical (standard for CH₂O), optional IR/PID for multi-gas configurations |
| Ingress Protection | IP68 |
| Explosion Protection | Ex ia IICT4 Ga (per GB/T 3836.1–2021 & GB/T 3836.4–2021) |
| Compliance | GB 50493–2019, GB 15322.3–2019 |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | MS104K-L-CxHy |
| Instrument Type | Portable |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Instrument Type | Portable Gas Detector |
| Detection Principle | Electrochemical / PID / Catalytic Combustion / Infrared / Thermal Conductivity (configurable per gas) |
| Detection Range | 0–10 ppm / 0–100 ppm / 0–1000 ppm / 0–100% LEL (custom ranges available) |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm), 0.1% LEL (0–100% LEL), 0.001% vol (0–99.999% vol) |
| Accuracy | ≤ ±3% FS (higher accuracy optional) |
| Response Time | T90 ≤ 20 s |
| Protection Rating | IP65 |
| Explosion-Proof Certification | Exia II CT4 |
| Dimensions | 178 × 70 × 40 mm |
| Weight | 300 g |
| Battery | 3.7 VDC, 4600 mAh Li-polymer (rechargeable via USB, operational during charging) |
| Operating Temperature | −40 °C to +70 °C |
| Sample Flow Rate | 500 mL/min (integrated pump suction) |
| Data Storage | 100,000 entries (expandable), USB export supported |
| Display | 2.31″ 320×240 color TFT screen with icon-based UI |
| Compliance | CMC Certified (China Metrology Accreditation), GB/T 18204.2–2014, GB 12358–2006, JJG 693–2011 |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | MS400-S-CO2 |
| Instrument Type | Portable |
| Detection Target | Multi-component gases |
| Measurement Range (CO₂) | 0–5000 ppm |
| Repeatability | ≤±2% F.S. |
| Resolution | 1 ppm (0–1000 ppm) |
| Response Time (T90) | ≤20 s |
| Zero Drift | ≤±2% F.S. |
| Span Drift | ≤±2% F.S. |
| Linearity Error | ≤±2% F.S. |
| Ingress Protection | IP68 |
| Explosion Protection | Ex ia IICT4 Ga |
| Display | 2.4″ color LCD |
| Data Storage | ≥1,000,000 records (expandable to >10 million with optional SD card) |
| Power | Rechargeable 7.4 V / 2700 mAh Li-polymer battery (≥20 h operation in pump-suction mode) |
| Operating Temperature | –20 °C to +55 °C (customizable to –40 °C to +70 °C) |
| Humidity Range | 10–95% RH |
| Brand | Eranntex |
|---|---|
| Model | MS500-MEK |
| Detection Principle | Electrochemical (Standard), Optional IR/PID/Catalytic/Thermal Conductivity |
| Gas Measured | Methyl Ethyl Ketone (MEK, C₄H₈O) |
| Display | 2.5" HD Color TFT Screen |
| Protection Rating | IP66 |
| Ingress Protection | Dust-tight & Powerful Water Jet Resistant |
| Explosion Protection | Intrinsically Safe (Ex ib IIB T4 Gb) |
| Operating Temperature | −40 °C to +70 °C |
| Battery | Rechargeable 6000 mAh Polymer Li-ion |
| Runtime | Up to 20 h (typical, single-gas, pump off) |
| Data Storage | 100,000 entries (expandable) |
| Communication | USB, RS232, Bluetooth (optional) |
| Sampling Method | Built-in Pump with >10 m Sampling Distance |
| Filtration | Integrated Water Vapor & Particulate Filter |
| Calibration | Multi-point Target Gas Calibration |
| Compliance | CMC Certified (China Metrology Accreditation), GB/T 34004–2017, GB 12358–2006 |
| Alarm Modes | Visual (LED/Screen), Audible (≥85 dB), Vibration, Undervoltage & Fault Indication |
| Units | ppm, mg/m³, %LEL, %Vol (auto-converted via molecular weight input) |
| Humidity & Temp Measurement | Optional Integrated Sensor (±2% RH, ±0.5 °C) |
| Software Support | PC-based Data Analysis Suite with Audit Trail, Export (CSV/XLS), Print & Trend Graphing |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MS500-SO2 |
| Detection Principle | Electrochemical |
| Measurement Range | 0–10 ppm, 0–100 ppm (custom ranges available) |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm), 0.01 mg/L (0–200% mg/L), 0.1% LEL, 0.01% Vol, 0.001% Vol |
| Repeatability | ≤±2% FS |
| Sampling Method | Built-in suction pump |
| Response Time | T90 ≤ 20 s |
| Operating Temperature | −40 °C to +70 °C |
| Humidity Range | 0–100% RH |
| IP Rating | IP66 |
| Explosion Protection | Ex ia IIC T4 Ga |
| Compliance | GB 15322.3–2019, GB 3836.1–2010, GB 3836.4–2010 |
| Battery | 3.7 VDC, 6000 mAh Li-polymer |
| Dimensions | 195 × 77 × 46 mm (L×W×H) |
| Weight | 350 g |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MS600-CH2O |
| Detection Principle | Electrochemical Sensor |
| Measurement Ranges | 0–10 ppm, 20 ppm, 50 ppm, 100 ppm, 1000 ppm, 5000 ppm, 100% LEL (custom ranges available) |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm), 0.1% LEL (0–100% LEL), 0.001% Vol (0–99.999% Vol) |
| Repeatability | ≤±1% FS |
| Sampling Method | Built-in pump suction (500 mL/min) |
| Response Time | T90 ≤ 20 s |
| Operating Temperature | –40 °C to +70 °C (optional high-temp sampling probe supports up to 1300 °C flue gas) |
| Temperature Measurement | –40 °C to +70 °C (±0.3 °C accuracy, optional) |
| Humidity Measurement | 0–100% RH (±2% RH accuracy, optional) |
| Ingress Protection | IP67 |
| Explosion Protection | Ex ia II CT4 |
| Battery | 3.7 V DC, 6000 mAh Li-polymer (with overcharge/over-discharge/short-circuit/thermal protection) |
| Data Storage | 100,000 records standard |
| Display | 2.5″ 320×240 color TFT screen |
| Dimensions | 195 × 77 × 46 mm (L×W×H) |
| Weight | 350 g |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Regional Category | Domestic (China) |
| Model | PTM600-CL2 |
| Price | USD 1,150 (FOB Guangdong) |
| Brand | Eranntex |
|---|---|
| Model | PTM600-HBr |
| Detection Principle | Electrochemical (standard), Optional IR/PID/TC/Catalytic Combustion |
| Detection Range | 0.001 ppm to 99.999 %Vol (auto-ranging, specified at order) |
| Resolution | 0.001 ppm (low-range), 0.001 %Vol (high-range) |
| Display | 3.5-inch HD color TFT screen |
| Protection Rating | IP66 |
| Ingress Protection | Dust-tight, powerful water jet resistant |
| Safety Certification | Intrinsically Safe (Ex ib IIB T4 Gb), CMC Certified |
| Sampling Method | Built-in explosion-proof diaphragm pump with integrated hydrophobic particulate filter |
| Sampling Distance | >10 m (with standard sampling hose) |
| Data Storage | Standard 100,000 records (expandable via SD card or USB mass storage) |
| Communication Interfaces | USB 2.0, RS232, Bluetooth 5.0 |
| Power Supply | 10,800 mAh Li-polymer battery (rechargeable via USB, supports hot-swap operation) |
| Operating Temperature | −40 °C to +70 °C (instrument) |
| Environmental Compensation | Integrated capacitive digital temperature/humidity sensor (optional) with real-time sensor compensation |
| Alarm Types | Dual-level (low/high), range, TWA, STEL |
| Calibration | Multi-point span calibration, zero auto-tracking, calibration log with timestamp and operator ID |
| Compliance | Meets GB/T 34004–2017, JJG 693–2011, ISO 16000-25, ASTM D6792, and supports 21 CFR Part 11 audit trail when used with compliant host software |
| Brand | Eranntex |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | PTM600-N2O |
| Detection Principle | Infrared (IR), Electrochemical (EC), PID, Catalytic Combustion, Thermal Conductivity |
| Detection Range (N₂O) | 0–100 ppm / 0–5000 ppm / 0–100% Vol (IR-based, selectable at order) |
| Resolution | 0.001 ppm (0–10 ppm), 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 0.001% Vol (0–99.999% Vol) |
| Accuracy | ≤±2% FS |
| Response Time (T90) | ≤20 s |
| Recovery Time | ≤30 s |
| Sampling Method | Integrated pump suction (800 mL/min) with particulate/moisture filter |
| Display | 3.5″ color TFT LCD (320×240) |
| Operating Temperature | −40°C to +70°C |
| IP Rating | IP66 |
| Explosion Protection | Exia II CT4 (Intrinsically Safe) |
| Battery | 3.7 VDC, 10800 mAh Li-polymer (rechargeable, with overcharge/overdischarge/short-circuit/thermal protection) |
| Data Storage | Standard 100,000 records |
| Communication | Bluetooth v5.0, USB, RS232 (auto-recognizing) |
| Certifications | CMC (China Metrology Accreditation), GB standard-compliant |
| Brand | Eranntex |
|---|---|
| Model | PTM600-NOX |
| Detection Principle | Electrochemical (standard for NOₓ), optional IR/PID/Catalytic Bead/Thermal Conductivity |
| Detection Range | 0–100 ppm (NOₓ, standard), extendable to 0–5000 ppm or 0–100% Vol |
| Resolution | 0.01 ppm (0–100 ppm), 0.1 ppm (0–1000 ppm), 1 ppm (>1000 ppm) |
| Accuracy | ≤±2% FS |
| Response Time (T90) | ≤20 s |
| Operating Temperature | −40 °C to +70 °C |
| IP Rating | IP66 |
| Intrinsic Safety Certification | Ex ia II C T4 |
| Battery | 10,800 mAh Li-polymer, continuous operation >12 h |
| Display | 3.5″ 320×240 color TFT LCD |
| Data Storage | 100,000 records (expandable via SD/UVC/USB) |
| Communication | Bluetooth v5.0, USB-C, RS232 |
| Pump Flow Rate | 800 mL/min |
| Weight | 2.5 kg |
| Dimensions | 255 × 210 × 125 mm (L×H×W) |
| Brand | Erlab |
|---|---|
| Origin | Shanghai, China |
| Model | Halo Sense |
| Monitoring Parameters | VOCs, Acid Gases, Formaldehyde |
| Environmental Operating Range | Temperature 10–30 °C, Relative Humidity 30–80 % RH |
| Power Consumption | 10 W |
| Electrical Supply | 100–240 V AC, 50–60 Hz |
| Sensor Technology | Semiconductor & Electrochemical Sensors (gas-specific) |
| Mounting Options | Benchtop or Wall-Mounted |
| Status Indication | Smart RGB Light Band |
| Data Acquisition | eGuard Software (PC & Mobile) |
| Compliance Context | Designed for GLP-aligned lab environments |
| Brand | Erlab |
|---|---|
| Origin | France |
| Model | Halo Sense |
| Detection Targets | VOCs, Acidic Gases, Formaldehyde |
| Sensor Types | Metal Oxide Semiconductor (VOC), Electrochemical (Acid & Formaldehyde) |
| Power Supply | 100–240 V AC, 50–60 Hz |
| Power Consumption | 10 W |
| Enclosure Material | Lightweight, Durable Plastic |
| Mounting Options | Wall-mounted or Desktop |
| Weight | 1 kg |
| Compliance | CE, RoHS, EN 61000-6-3, EN 61000-6-1 |
| Software Platform | eGuard Cloud-Enabled Monitoring Suite |
| Data Connectivity | Ethernet (RJ45), Wi-Fi (optional), USB for local configuration |
| Alarm Output | Visual (RGB Status Light Band), Audible (85 dB @ 30 cm), Push Notifications via eGuard App |
| Brand | Erlab |
|---|---|
| Model | Halo Sense |
| Detection Targets | VOCs, Formaldehyde, Acidic Gases |
| Sensor Types | Semiconductor (VOCs), Electrochemical (Formaldehyde & Acidic Gases) |
| Mounting | Wall-mounted or Desktop |
| Power Supply | 100–240 V AC, 50–60 Hz |
| Power Consumption | 10 W |
| Enclosure Material | Impact-resistant polymer |
| Weight | 1 kg |
| Connectivity | Ethernet (LAN), USB (for local PC connection), Wi-Fi-enabled via eGuard software |
| Compliance | CE, RoHS, FCC Class B |
| Software Platform | eGuard v3.2+ (Windows/macOS/iOS/Android) |
| Data Logging | Local storage + cloud-synced (optional), audit-trail enabled |
| Alarm Output | Visual (RGB status ring with dynamic pulse pattern), Audible (adjustable 65–85 dB SPL), Relay contact (dry contact, 250 VAC/2 A) |
| Operating Temperature | 5–40 °C |
| Relative Humidity Range | 20–80 % RH (non-condensing) |
| Brand | Ersatec |
|---|---|
| Origin | Germany |
| Model | SmartFID |
| Detection Principle | Flame Ionization Detection (FID) |
| Instrument Type | Portable |
| Typical Configuration | Composite VOC Analyzer |
| Measurement Range | 0–100,000 ppm (as C₃H₈) |
| Resolution | 0.01 ppm |
| Accuracy | ±1.0% of reading |
| Response Time (T₉₀) | 1.5 s |
| Operating Temperature (Gas Path) | Up to 200 °C (optional to 230 °C) |
| Sample Flow Rate | 0.8–1.0 L/min |
| Power Supply | 115–230 VAC, 48–63 Hz, 120–150 W |
| Dimensions | 420 × 470 × 310 mm |
| Weight | 16 kg |
| Fuel Gas | H₂ (Grade 5, hydrocarbon residual <0.5 ppm, 3 bar) or H₂/He mixture |
| Zero Gas | Built-in catalytic hydrocarbon scrubber or carbon filter |
| Analog Outputs | Two user-configurable 0/4–20 mA |
| Digital Outputs | Three programmable relay contacts (250 V AC, 1 A) |
| Data Storage | Internal XML logging, USB export to Excel-compatible format |
| Brand | Ersatech |
|---|---|
| Model | SmartFID ST |
| Origin | Germany |
| Detection Principle | Flame Ionization Detection (FID) |
| Instrument Type | Online Analyzer |
| Configuration | Composite VOC Analyzer |
| Measurement Range | 0–100,000 ppm (as C₃H₈) |
| Resolution | 0.01 ppm |
| Accuracy | ±1.0% of reading |
| Response Time (T₉₀) | <1.5 s |
| Operating Temperature of Wetted Parts | 200 °C |
| Power Supply | 115–230 VAC, 48–63 Hz, max. 350 W |
| Dimensions | 177 × 445 × 365 mm (4U, 19″ rack-mountable) |
| Weight | 9 kg |
| Analog Outputs | Two user-configurable 0/4–20 mA |
| Digital Outputs | Three programmable relay contacts (250 V AC, 1 A) |
| Sample Flow Rate | ~1.2 L/min |
| Zero Drift | ≤0.5% of full scale per month |
| Span Drift | ≤2.8% of full scale per week |
| Linearity | ±1.0% of selected range |
| Oxygen Interference | <4% at 80 ppm C₃H₈ |
| Warm-up Time | 25 min |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ET5101 |
| Price Range | USD 7,000–14,000 |
| Instrument Type | Continuous Emission Monitoring System (CEMS) Compliant Portable Analyzer |
| Indication Error | ±0.2% FS |
| Repeatability | <2% RSD |
| Response Time | ≤15 s (T90) |
| Stability | <5% drift over 8 h |
| Measured Parameters | Particulate Matter (PM) concentration via gravimetric filtration + Flue Gas composition (O₂, SO₂, NO, NO₂, CO, CO₂) |
| Brand | ETI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 6080 EGAC |
| Pricing | Available Upon Request |
| Sampling Flow Rate | 0.5 m³/h or 1.0 m³/h (critical orifice) |
| User Interface | 15" Color XGA + PCAP Touchscreen |
| Data Communication | Ethernet TCP/IP, USB 2.0 |
| Relative Humidity Range | 10–80 % RH (non-condensing) |
| Operating Temperature | 20–30 °C |
| Power Supply | 220 ± 22 VAC, 50 ± 0.5 Hz |
| Brand | ETI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GC6010 |
| Pricing | Available Upon Request |
| Measurement Principle | Gas Chromatography with Flame Ionization Detection (GC-FID) |
| Analytes | Non-Methane Hydrocarbons (NMHC), Benzene-Toluene-Ethylbenzene-Xylenes (BTEX) |
| Column Configuration | One Packed Column + One Empty Column (for THC) + One Dedicated Packed Column (for BTEX) |
| Detector | Dual FID Units (Dedicated or Shared via Valve Switching) |
| Oven Temperature Control | 120 °C (BTEX), 150 °C (NMHC), ±0.5 °C Stability |
| Carrier Gas | Hydrocarbon-Free Air |
| Analysis Cycle | < 120 s (NMHC), < 180 s (BTEX) |
| Response Time (T90) | < 20 s |
| Signal Output | RS-232 / RS-485 (Modbus RTU) |
| Power Supply | 220 ± 22 VAC, 50 ± 0.5 Hz |
| Operating Ambient | 0–50 °C |
| Sample Line Heating | Full High-Temperature Zone (≥150 °C), No Cold Spots |
| Valving | 5-Position, 10-Port Rotary Valve with Patented Back-Flush Capability |
| Compliance | GB/T 39786–2021, HJ 1012–2018, HJ 1078–2019 |