Gas Detector
Filter
Showing 871–900 of 3001 results
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FCC-3000G |
| Pricing | Available Upon Request |
| Sampling Flow Rate | 2 L/min |
| Vacuum Pressure | >5000 Pa |
| Load Capacity | >2000 Pa |
| Dust Fraction Collection | Total Dust & Respirable Dust |
| Continuous Operation Time | >10 h |
| Sound Pressure Level | <60 dB(A) |
| Explosion Protection | Intrinsic Safety, Exib I |
| Operating Temperature | 0–35 °C |
| Relative Humidity | <95% RH |
| Dimensions (L×W×H) | 120 × 80 × 42 mm |
| Weight | 450 g |
| Power Supply | 5× Ni-MH rechargeable cells (1.3 Ah each), series-connected |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FCS-10 |
| Price Range | USD 280 – 700 |
| Power Supply | DC 11.1 V (4.5 Ah Li-ion battery) / AC 220 V ±10%, 50 Hz |
| Flow Range | 1–10 L/min or 1–15 L/min (selectable) |
| Vacuum Pressure | >1500 Pa |
| Flowmeter Accuracy | ±2.5% F.S. |
| Flow Stability | ≤±5% |
| Sampling Flow Error | ≤±5% |
| Noise Level | <75 dB(A) |
| Timer Range | 1 min – 99 h 59 min |
| Timer Accuracy | ≤±0.1% |
| Operating Temperature | −10 °C to +40 °C |
| Relative Humidity | <95% RH |
| Charging Current | 1 A |
| Continuous Operation Time | >5 h |
| Dimensions | 205 × 135 × 115 mm |
| Weight | 2.3 kg |
| Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | FD218 |
| Price | USD 6,700 (FOB Beijing) |
| Brand | Fengtu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FT-GD1 |
| Price | USD 10,800 (FOB) |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model | FGA-4100A |
| Pricing | Upon Request |
| Gas Measurement | HC (0–9999 ppm), CO (0–9.99%), CO₂ (0–20%), O₂ (0–25%), NO (0–5000 ppm), λ (0.5–3.0), Oil Temperature (0–150 °C), RPM (250–10000 rpm) |
| Opacity Measurement | N (0–99.9%), k (0–16 m⁻¹) |
| Resolution | HC (1 ppm), CO (0.01% / 0.001%), CO₂ (0.1% / 0.01%), O₂ (0.1% / 0.01%), NO (1 ppm), λ (0.001), Oil Temp (0.1 °C), RPM (1 rpm), N (0.1%), k (0.001 m⁻¹) |
| Accuracy | HC (±12 ppm or ±5%), CO (±0.06% or ±5%), CO₂ (±0.5% or ±5%), O₂ (±0.1% or ±5%), NO (±25 ppm or ±4%), N (±2%) |
| Response Time | HC/CO/CO₂ ≤10 s |
| Warm-up Time | 15 min |
| Power Supply | AC 220 V ±10%, 50 Hz ±1%, 10 A |
| Power Consumption | ~50 W |
| Weight | Main Unit 9 kg (Control Unit 3 kg + Measurement Unit 4.5 kg) |
| Operating Environment | 5–40 °C, RH 0–95% non-condensing |
| Interfaces | RS-232C, RS-485 |
| Data Storage | 300 test records with timestamp, real-time clock, curve logging, optional EOB-D diagnostics, programmable firmware update via serial port |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FCC-1500D |
| Pricing | Available Upon Request |
| Flow Range Options | 0.1–1.5 L/min or 0.1–3 L/min |
| Flow Accuracy | ≤ ±5% |
| Timing Accuracy | ≤ ±0.1% |
| Maximum Vacuum | ≥35 kPa |
| Charging Current | 300 mA (standard) |
| Power Supply | 10 V DC / 220 V AC, 50 Hz |
| Operating Temperature | –25°C to +45°C |
| Noise Level | ≤55 dB(A) |
| Relative Humidity | ≤85% RH |
| Dimensions | 100 × 50 × 110 mm |
| Battery Type | Rechargeable Ni-Cd |
| Continuous Operation Time | Up to 24 h per charge |
| Timer Range | 1 min to 99 h 59 min (programmable countdown) |
| Housing Material | AS/ABS engineering plastics with moisture-, dust-, and ESD-resistant coating |
| Origin | France |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FGD-MgO/Lime |
| Pricing | Available Upon Request |
| Origin | France |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FGD-Integrated |
| Price | Upon Request |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | AMMS-100 |
| Pricing | Available Upon Request |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | CEMS-2000 B S & LGA-4500 |
| Pricing | Available Upon Request |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | MCA10m |
| Instrument Type | Portable Flue Gas Analyzer |
| Measurement Accuracy (Full Scale) | ±0.1% |
| Repeatability | ≤2% |
| Response Time (T90) | 3 s |
| Long-Term Stability | ±2% per 8 h |
| Measured Gases | O₂, CO, CO₂, NO, SO₂, NO₂ |
| Detection Principle | Electrochemical (O₂, CO, NO, SO₂, NO₂) and NDIR (CO₂) |
| Operating Temperature Range | -10 °C to +50 °C |
| IP Rating | IP42 |
| Power Supply | Rechargeable Li-ion battery (≥6 h continuous operation) |
| Data Storage | Internal SD card (≥16 GB), up to 1 million data points |
| Compliance | EN 50379-1/-2, DIN EN 15267-3, MCERTS certified (UK), ISO 12039, ISO 10849, ASTM D6522 |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | MCA14-m |
| Principle | Non-Dispersive Infrared (NDIR) Absorption Spectroscopy |
| Type | Portable |
| Measured Gases | CO, CO₂, NO, NO₂, N₂O, NH₃, SO₂, O₂, CH₄, H₂O, HCl, CH₂O (13 components) |
| Response Time | <10 s |
| Repeatability | ≤1% |
| Operating Temperature | 185–200 °C (sample path & measurement cell) |
| Compliance | CPA Certified |
| Sample Handling | Hot-wet in situ analysis, no drying, dilution or cooling required |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | MCA14m |
| Measurement Principle | Non-Dispersive Infrared (NDIR) with High-Temperature Optical Path |
| Operating Temperature | 185 °C (entire gas path heated) |
| Accuracy | ≤1% FS |
| Repeatability | ±2% FS |
| Response Time (T90) | <10 s |
| Zero Calibration | Automatic, using ambient air |
| Gas Components | O₂, CO₂, H₂O, SO₂, NO, NO₂, N₂O, NH₃, HCl, CO, CH₄ |
| Sampling Method | Extractive, hot-wet |
| Power Supply | 230 V AC, 50/60 Hz |
| Enclosure Rating | IP65 |
| Compliance | EN 15267-3, EN 14181, MCERTS, ISO 14001-compatible operation |
| Data Output | RS485, Ethernet, 4–20 mA analog outputs |
| Software | PC-based configuration & data logging (free OEM software with audit trail) |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | UVA17m CD |
| Instrument Type | Portable Flue Gas Analyzer |
| Measurement Principle | UV Differential Absorption Spectroscopy (UV-DOAS) for NO, NO₂, SO₂, NH₃, H₂S |
| Compliance | HJ 1131–2020, HJ 1132–2020, HJ/T 397–2007, JJG 968–2002, DB37/T 2704–2015, DB37/T 2705–2015, DB37/T 2641–2015 |
| Operating Environment | High-humidity, low-sulfur flue gas streams |
| Key Performance Attributes | Moisture-insensitive measurement, dual-range auto-switching, high-temperature sample path (180 °C), integrated thermal stabilization of optical components, sub-ppm detection limits, cross-interference compensation algorithm |
| Brand | Foedisch |
|---|---|
| Origin | Germany |
| Model | UVA17m |
| Type | Portable Multicomponent Gas Analyzer |
| Measurement Principle | High-Temperature Ultraviolet Absorption Spectroscopy |
| Response Time | ≤2 s |
| Measurable Gases | O₂, NOₓ (NO/NO₂), SO₂, NH₃, H₂S |
| Operating Temperature Range | 185–200 °C (full-path heated) |
| Detection Limits | SO₂ down to 0–50 mg/m³ |
| Sample Handling | Hot-wet, in-situ sampling without drying, dilution or cooling |
| Compliance | Designed for EN 15267-3, EN 14181, ISO 12039, and EPA Method 201A-compliant monitoring |
| (注意 | ��此处为严格按任务要求生成的英文产品名称。但需特别说明：原文品牌“聚光科技”英文官方名为 **Hangzhou FPI Science & Technology Co., Ltd.**, 常缩写为 **FPI**, 而非 Fortinet（Fortinet 是知名网络安全公司，与本仪器无关 |
|---|---|
| 此系用户输入误植。根据B2B SEO真实性原则 | ��必须修正为真实品牌。故正确名称如下：) |
| [Brand | FPI |
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) & System Integrator |
| Product Category | Atmospheric Heavy Metal Online Analyzer |
| Model | AMMS-100 |
| Measurement Principle | Beta-ray Absorption + Energy-Dispersive X-ray Fluorescence (ED-XRF) |
| Sample Collection | Continuous Filter-based Particulate Enrichment |
| Output Parameters | PM mass concentration (μg/m³), Elemental mass concentration (ng/m³), Element-to-PM ratio (ppm), Elemental mass fraction (%) |
| Simultaneous Elements | Up to 28 elements (Pb, Hg, Cr, Cd, As, etc.) |
| Detection Limit | As low as 0.01 ng/m³ for selected elements |
| Filter Exchange Interval | Programmable, typically 24–168 h |
| Operating Ambient Temperature | –20 °C to +50 °C (industrial-grade enclosure) |
| Operating Ambient Humidity | 10–90 % RH, non-condensing |
| Power Supply | 220 V AC ±10 %, 50/60 Hz |
| Compliance | Designed per IEC 61326-1 (EMC), EN 61000-6-2/6-3, and compatible with ISO/IEC 17025 laboratory environmental monitoring workflows] |
| Brand | SIGAS (Schütz Mess- und Regeltechnik) |
|---|---|
| Origin | Switzerland |
| Model | Foxsense MULTi 2000 Plus |
| Form Factor | Rack-Mount (19" 3U) |
| Channel Configuration | Single or Dual Channel |
| Enclosure Options | IP20 (bare rack unit) or IP52 (enclosed rack version) |
| Dimensions (IP20) | 482 × 133 × 245 mm |
| Dimensions (IP52) | 500 × 143 × 260 mm |
| Response Time (T90) | ≤30 s |
| Measured Gases | CH₄, CO₂, CO, O₂ |
| Gas Sampling | Continuous online flow-through |
| Compliance | Designed for industrial process monitoring and biogas quality control per EN 16726, ISO 8573-1 (compressed air purity), and applicable IEC 61000-6-2/4 EMC standards |
| Regulatory Context | Supports GLP/GMP-aligned data integrity when integrated with audit-trail-enabled SCADA or DCS systems |
| Brand | SIGAS (Schütz Mess- und Regeltechnik) |
|---|---|
| Origin | Switzerland |
| Model | Foxsense PAROX 2000 Plus |
| Measurement Principle | High-Sensitivity Paramagnetic Detection |
| Operating Temperature Range | Up to 55°C continuous |
| Enclosure | 19" 3U Rack-Mounted |
| Dimensions (W×H×D) | 482 × 133 × 245 mm |
| IP Rating | IP20 |
| Sensor Core | Integrated Parox1200 Paramagnetic Sensor |
| Calibration | Fully Parameterized Auto-Calibration |
| Channel Configuration | Single or Dual (MULTI2000Plus option) |
| Gas Path Materials | Viton® or PVDF |
| Gas Inlet/Outlet | 4 mm or 6 mm PVDF tubing with stainless steel compression fittings |
| Pressure Compensation Options | None / Electronic / Integrated Pressure Regulator / External Pressure Input (sensor not included) |
| Flow Monitoring Options | None / Mechanical Flowmeter / Electronic Flowmeter with Display & Alarm |
| Oxygen Range Options | 0–25% O₂ |
| Pump Options | None / Integrated Sampling Pump |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic (China-made) |
| Model | AQMS-100 |
| Pricing | Upon Request |
| Zero Air Purity | Not Specified |
| Flow Rate | Up to 20 L/min |
| Output Pressure | Adjustable |
| Dew Point | Not Specified |
| Flow Measurement Accuracy | Not Specified |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AQMS-1000M |
| Pricing | Upon Request |
| Pollutant Parameters | O₃ (UV Photometry), SO₂ (UV Fluorescence), NOₓ (Chemiluminescence), CO (NDIR Gas Correlation Filtering), PM₁₀ & PM₂.₅ (Beta Attenuation Method) |
| Meteorological Parameters | Wind Speed, Wind Direction, Temperature, Relative Humidity, Atmospheric Pressure |
| Enclosure Rating | IP55 |
| Operating Temperature Range | -30 °C to +50 °C |
| Communication Interfaces | RS232, Ethernet, USB |
| User Interface | Integrated Industrial Touchscreen PC (Color, High-Resolution) |
| Configuration | Modular Analytical Subsystem Architecture |
| Compliance | HJ 653–2013, HJ 654–2013, HJ 655–2013 (China), US EPA EQOA Designated Methods |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | AQMS-200 |
| Pricing | Available Upon Request |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AQMS-300 |
| Instrument Type | Online Fixed-Mount Analyzer |
| Detection Principle | UV Photometry (254 nm) |
| Compliance | Designed for EPA EQOA-01, ISO 13964, and EN 14625 compliance frameworks |
| Output Interfaces | RS232, RS485, Ethernet, 4–20 mA analog output |
| Calibration | Remote automatic zero/span calibration with programmable schedule |
| Lamp Monitoring | Integrated mercury lamp intensity self-diagnostic with lifetime estimation |
| Flow Protection | Auto-shutdown at sub-threshold sample flow rate |
| Security | Role-based remote access control with firmware upgrade authorization |
| Enclosure Rating | IP54 (indoor industrial use) |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Online Fixed-Station Analyzer |
| Detection Target | Single-Gas (CO) |
| Measurement Principle | Gas Filter Correlation Non-Dispersive Infrared (GFC-NDIR) |
| Compliance Context | Designed for ambient air quality monitoring networks compliant with Chinese HJ 659–2013 and compatible with international reference methods per ISO 12039 and EPA Method 10 |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | AQMS-500 |
| Configuration | Continuous Emission Monitoring System (CEMS)-Grade Online Analyzer |
| Regulatory Classification | Ambient Air Quality Monitoring Instrument |
| Compliance Framework | Designed for integration into national and municipal air quality monitoring networks compliant with HJ 654–2013, EPA Method 40 CFR Part 53, and ISO 7935:1995 (Air Quality — Determination of Sulfur Dioxide — Ultraviolet Fluorescence Method) |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | AQMS-600 |
| Pricing | Available Upon Request |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Atmospheric Heavy Metal & VOCs Online Analyzer |
| Model | Atmospheric BTEX Online Analyzer |
| Measurement Principle | Ambient-Temperature Preconcentration + High-Temperature Thermal Desorption + Capillary Gas Chromatography + Photoionization Detection (GC-PID) |
| Sample Introduction | Mass Flow Controlled (MFC) Quantitative Sampling |
| Thermal Desorption | Direct-Heating Rapid Desorption (>40°C/s) |
| Chromatographic Separation | Capillary Column with Valve-Switched Backflush |
| Detector | High-Sensitivity PID (10.6 eV Lamp) |
| Carrier Gas Control | Electronic Pressure & Flow Control (EPC/EFC) for Carrier, Make-up, and Auxiliary Gases |
| Compliance Framework | Designed for ISO 16000-6, ASTM D5197, US EPA Method TO-15 & IP-12, and GLP/GMP-aligned data integrity requirements |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Atmospheric Quality Monitoring Solution |
| Pricing | Available Upon Request |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | BBJ |
| Pricing | Available Upon Request |
| Enclosure Material | Die-Cast Aluminum Alloy |
| Lens Material | Tempered Glass (Red/Yellow/Blue Options) |
| IP Rating | IP65 |
| Hazardous Area Certification | ATEX/IECEx Zone 1 & 2, Class I Div 1 & 2, Class II Div 1 & 2, Class III Div 1 & 2 |
| Temperature Class | T1–T6 |
| Gas Group | IIA, IIB, IIC |
| Dust Hazard Compliance | EN 60079-31 (IEC 60079-31), ATEX 2014/34/EU Annex VIII Category 2D/3D |
| Brand | FPI (Focus Photonics Inc.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Aerosol Black Carbon Analyzer |
| Measurement Principle | Optical Attenuation (Filter-Based Transmission) |
| Wavelength Channels | 7-channel (370, 450, 520, 590, 660, 880, 950 nm) |
| Primary Output | Black Carbon Mass Concentration (µg/m³) and Wavelength-Dependent Absorption Coefficient (Mm⁻¹) |
| Compliance | QX/T 68–2007 (China Meteorological Administration Standard) |
| Flow Control | Integrated Precision Mass Flow Controller |
| Detection System | Dual Photodetector Correction + Charge-Integrating ADC Architecture |
| Data Output | Real-time, Continuous, On-line |