Industrial Process Control Instruments
Filter
Showing 571–600 of 1088 results
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | PH-200 |
| pH Range | 0–14 |
| Temperature Range (Sample) | 0–100 °C |
| Operating Ambient Temperature (Transmitter) | −20 to +55 °C |
| Power Supply | AC 100–240 V ±10%, 50/60 Hz |
| Enclosure Material | Aluminum Alloy |
| Ingress Protection | IP65 |
| Compliance | CE Marking, FCC Rules, RoHS, WEEE |
| Output | 4–20 mA (4-wire), Optional Temperature Compensation |
| Display | Backlit LCD with Simultaneous pH & Temperature Readout |
| Self-Diagnostic Function | Yes |
| Electrode Interface | Standard BNC or DIN connector (electrode not included) |
| Calibration Memory | Yes |
| Terminal Type | Screw-type Terminal Blocks (Non-loosening) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | pH-300 |
| Measurement Range (pH) | 0–14 (display range: −1 to 15) |
| Temperature Range | 0–100 °C (display range: −10 to 110 °C, up to −20 to 130 °C with manual sensor type input) |
| Resolution | 0.01 pH / 0.1 °C |
| Accuracy | ±0.03 pH (equivalent input) / ±0.3 °C (equivalent input) |
| Output | 4–20 mA DC (galvanically isolated, load ≤600 Ω, linearity ±0.08 mA) |
| Power Supply | 24 V DC (21–32 V DC), ≤0.6 W |
| Enclosure | Aluminum alloy, IP65 (IEC 60529 / JIS C0920) |
| Operating Ambient | −20 to +60 °C, 5–90% RH (non-condensing) |
| Compliance | CE marking, FCC rules, RoHS, WEEE |
| Brand | HORIBA |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | PI-200-I |
| Pricing | Upon Request |
| Brand | Pri-eco |
|---|---|
| Origin | France |
| Manufacturer | Hprobe SAS (distributed by Pri-eco) |
| Category | Import |
| Model | Speed-Up Wafer-level Magnetic Test |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Speed-Up Wafer-level Magnetic Test |
| Price | Upon Request |
| Brand | HuaiAi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (PRC) |
| Model | GC-9560-HTP |
| Pricing | Upon Request |
| Brand | Huake Instrument |
|---|---|
| Origin | Beijing, China |
| Model | HK-1309pH |
| Measurement Principle | Conductivity-based pH calculation (VGB-R 450L compliant) |
| pH Range | 7.5–11.5 |
| Cation Conductivity Range | 0.000–200.0 µS/cm (with selectable cell constants: 0.01, 0.1, 1.0 cm⁻¹) |
| Resolution | 0.001–0.1 µS/cm (dependent on range) |
| Ammonia Range | 0.01–10 ppm |
| Temperature Compensation | Linear, neutral salt, ammonia water, strong acid modes |
| Compliance | HK-338 Enterprise Standard, JJG 376–2007 Verification Regulation for Conductivity Meters |
| System Integration | Integrated stainless-steel panel with flow cell, cation exchange column, regeneration unit, solenoid valves, and dual-conductivity sensors |
| Brand | Huake Instrument |
|---|---|
| Origin | Beijing, China |
| Model | HK-328 |
| Display | 192 × 64 dot-matrix LCD (Chinese/English selectable) |
| pH Range | 0.00–14.00 pH |
| ORP Range | −1000 to +1000 mV |
| Temperature Range | 0.00–99.9 °C |
| ATC Range | 0.1–60.0 °C |
| pH Resolution | 0.01 pH |
| mV Resolution | 0.1 mV |
| Temp. Resolution | 0.1 °C |
| pH Accuracy | ±0.05 pH |
| Temp. Accuracy | ±0.5 °C |
| Response Time (T90) | 90 s at 25 °C |
| Output | Dual isolated 4–20 mA (or 0–10 mA / 0–20 mA), configurable for pH or temperature |
| Max. Load | 800 Ω @ 20 mA |
| Alarm Outputs | 2 programmable relay outputs |
| Communication | RS-485, Profibus DP, HART |
| Sample Temp. | 5–50 °C |
| Sample Flow Rate | 6 L/h |
| Max. Suspended Solids | ≤5 µm (no colloids or oils) |
| Ambient Temp. | 5–45 °C |
| Humidity | ≤90% RH (non-condensing) |
| Storage Temp. | −20 to +55 °C (electrode stored separately >0 °C) |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Power Consumption | ≤8 W |
| Dimensions | 146 × 146 × 154 mm (W×H×D) |
| Panel Cutout | 139 × 139 mm |
| Weight | 2 kg |
| Brand | Huake Instrument |
|---|---|
| Model | HK-328W |
| Enclosure | Die-cast aluminum, ESD-safe |
| Display | 192 × 64 dot-matrix LCD (Chinese/English selectable) |
| pH Range | 0.00–14.00 pH |
| mV Range | −1000 to +1000 mV |
| Temperature Range | 0.00–99.9 °C (ATC: 0.1–60.0 °C) |
| pH Resolution | 0.01 pH |
| mV Resolution | 0.1 mV |
| Temp. Resolution | 0.1 °C |
| pH Accuracy | ±0.1 pH |
| Temp. Accuracy | ±0.5 °C |
| Output | Dual isolated 4–20 mA (or 0–10 mA / 0–20 mA), ±1% FS, load ≤800 Ω |
| Alarm Outputs | 2 relay outputs |
| Communication | RS485, Profibus DP, HART |
| Sample Temp. | 0.0–60.0 °C |
| Max. Sample Pressure | <0.6 MPa |
| Ambient Temp. | 5–60 °C |
| Humidity | ≤95% RH |
| Storage Temp. | −25–55 °C (electrode storage >0 °C) |
| Power | AC 100–240 V, 50–60 Hz |
| Power Consumption | 8 W |
| Dimensions | 158 × 158 × 170 mm (W×H×D) |
| Panel Cutout | 139 × 139 mm |
| Weight | 2 kg |
| Electrode Type | Wastewater-compatible triple-junction composite pH electrode (standard 10 m or optional 20 m cable) |
| Brand | Huake Instrument |
|---|---|
| Model | HK-338 |
| Origin | Beijing, China |
| Enclosure | Die-cast aluminum housing |
| Display | 192 × 64 dot-matrix LCD (Chinese/English selectable) |
| Conductivity Range | 0.000–2.000 μS/cm (K=0.01), 0.00–20.00 μS/cm (K=0.1), 0.0–200.0 μS/cm (K=1.0), 0.000–2.000 mS/cm (K=10.0) |
| Resolution | 0.001 μS/cm (conductivity), 0.1 ℃ (temperature) |
| Accuracy | ±1.5% FS (conductivity), ±0.5 ℃ (temperature) |
| Temperature Compensation | Automatic (ATC: 0.1–60.0 ℃) or manual |
| Measurement Principle | Four-wire conductivity measurement (eliminates lead resistance effects) |
| Output | Two isolated 4–20 mA (or 0–10/0–20 mA) analog outputs |
| Communication | RS-485 (Modbus RTU), optional Profibus DP or HART protocol |
| Data Logging | Internal storage for historical conductivity & temperature data with trend curve recall |
| Sample Temp. | 5–50 ℃ |
| Max. Flow Rate | ≤6 L/h |
| Suspended Solids Limit | ≤5 μm (no colloids or oils) |
| Ambient Operating Temp. | 5–45 ℃ |
| Relative Humidity | ≤90% RH (non-condensing) |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Power Consumption | 8 W |
| Dimensions | 146 × 146 × 154 mm (W × H × D) |
| Panel Cutout | 139 × 139 mm |
| Weight | 2 kg |
| Compliance | Designed for industrial process environments per IEC 61000-6-2 (EMC immunity) and IEC 61000-6-4 (EMC emission) standards |
| Brand | Huake Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HK-5100 |
| Pricing | Upon Request |
| Brand | Huake Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HK-5200 |
| Quotation | Upon Request |
| Cooling Capacity | 4.5 kW |
| Refrigeration Power | 5 HP |
| Electrical Power Input | 6 kW |
| Circulating Pump Power | 1.5 kW |
| Max. Sample Inlet Temp | ≤40 °C |
| Outlet Temp Control | (25 ±1) °C |
| Total Sample Flow Rate | 1500 mL/min |
| Sample Points | 1–20 |
| Cooling Water Requirement | P ≤ 0.2 MPa, Q ≤ 6 t/h |
| Circulation Flow Rate | 12 L/h |
| Temperature Stabilization Time | ≤3 min for 0.35 ton coolant |
| Brand | Huake Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HK-5500 |
| Pricing | Upon Request |
| Heat Exchanger Area | 2 × 15–2 × 30 m² |
| Deionized Water Tank Volume | 2 m³ |
| Pump Configuration | Dual (1 active + 1 standby), H-(30–65)-30-2002, 2 × (5.5–7.5) kW |
| DI Water Flow Rate | 10–40 t/h |
| DI Water Outlet Temperature | ≤33 °C |
| DI Water Outlet Pressure | 0.2–0.6 MPa |
| Industrial Cooling Water Inlet Flow | 15–60 t/h |
| Industrial Water Inlet Temp | ≤33 °C |
| Industrial Water Inlet Pressure | 0.2–0.6 MPa |
| Power Supply | 380 VAC, 50 Hz |
| Dimensions (L×W×H) | 3200 × 2000 × 2300 mm |
| Weight | 3.2 t |
| Construction Material | AISI 304 stainless steel for all wetted parts |
| Heat Exchanger Type | Weld-free gasketed plate heat exchanger |
| Control Features | Low/high level alarms, dry-run protection, auto-refill solenoid valve, dual-pump redundancy |
| Brand | Huakeyi |
|---|---|
| Origin | Beijing, China |
| Model | HK-6010 |
| Measurement Range | pH 2.00–11.00 |
| Temperature Range | 0.00–99.9 °C |
| ATC Range | 0.1–60 °C |
| pH Resolution | 0.01 pH |
| Temperature Resolution | 0.1 °C |
| pH Accuracy | ±0.1 pH |
| Temperature Accuracy | ±0.5 °C |
| Output Signals | Isolated 0–10 mA / 0–20 mA / 4–20 mA (±1% FS) |
| Sample Temp. | 5.0–50.0 °C |
| Max. Sample Pressure | <0.6 MPa |
| Ambient Temp. | 5–50 °C |
| Humidity | ≤95% RH |
| Dimensions (Enclosure) | 300 mm × 400 mm × 200 mm (W×H×D) |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Power Consumption | ≤40 W |
| Dielectric Strength | 1500 VAC for 1 min |
| Brand | Junfang Lihua |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HXPQX-2020 |
| Price Range | USD 28,000–42,500 |
| Internal Volume | 0.60 m³ |
| Cross-Sectional Dimensions | 400 × 300 mm |
| Tunnel Length (Centerline) | 1850 mm |
| Temperature Range (High Temp Test) | 50–70 °C ±2 °C |
| Temperature Range (Low Temp Test) | 0–−40 °C ±2 °C |
| Humidity Range (Steady-State Damp Heat) | 93 %RH ±3 %RH at 40 °C ±2 °C |
| Air Velocity Range | 0–6.5 m/s ±0.2 m/s |
| Rotational Step | 45° per increment |
| Temp Measurement Accuracy | ±0.5 °C (Resolution ≤0.1 °C) |
| RH Measurement Accuracy | ±0.5 %RH (Resolution ≤0.1 %RH) |
| Air Velocity Measurement | 0.2–10 m/s, ±5 % error (Resolution ≤0.1 m/s) |
| Heating Rate | ≤1 °C/min |
| Cooling Rate | 0.5–1 °C/min |
| Humidification Rate | ≤5 %RH/min |
| Dehumidification Rate | ≤1 °C/min |
| Brand | Hydramotion |
|---|---|
| Origin | United Kingdom |
| Model | XL7 |
| Measurement Range | 0–10 cP |
| Accuracy | ±1% of reading |
| Temperature Range | −50 to +400 °C |
| Pressure Rating | 700 bar |
| Sensor Repeatability | ±0.3% |
| Process Connections | Customizable flanged, threaded, or sanitary clamp interfaces |
| Wetted Materials | Super Duplex Stainless Steel (S32750 / UNS S32750, marketed as SAR2507) |
| Sensor IP Rating | IP67 |
| Transmitter IP Rating | IP65 |
| Safety Certifications | ATEX II 2G Ex ia IIC T1–T6 Ga, IECEx Ex ia IIC T1–T6, UKCA, CE, ISO 9001 certified |
| Electrical Supply | 24 VDC ±10%, 150 mA max |
| Analog Outputs | Three isolated 4–20 mA outputs (e.g., dynamic viscosity, intrinsic viscosity, temperature-compensated viscosity) |
| Digital Interfaces | RS485 Modbus RTU, USB for configuration and diagnostics |
| Alarm Outputs | Two voltage-free relay contacts (SPST, 250 VAC/30 VDC, 2 A) |
| Dimensions (Transmitter) | 200 × 120 × 90 mm |
| Enclosure Material | Polycarbonate (UL94 V-0 rated) |
| Weight | 920 g |
| Brand | Hydramotion |
|---|---|
| Origin | United Kingdom |
| Model | XL7-HT |
| Temperature Range (HT) | –50 °C to +400+ °C |
| Viscosity Range | 0–1 mPa·s to 0–10⁹ mPa·s |
| Accuracy | ±1% of reading or ±1 digit |
| Repeatability | ±0.3% of reading or ±1 digit |
| Measurement Interval | 1 s |
| Process Connection | Customizable (flanged, threaded, sanitary clamp) |
| Electrical Output | 4–20 mA analog + digital serial (RS-485/Modbus RTU) |
| Intrinsically Safe Certification | ATEX 2014/34/EU, IECEx Ex ia IIC T1–T6 Ga, Ex ia IIIC T135 °C Da, UL Class I Div 1 Groups A–D |
| Enclosure Rating | IP67 |
| Max Cable Length | 1000 m |
| Sensor Material Standard | SS316 (EN 1.4401) / SS316L (EN 1.4404) |
| Optional Materials | Alloy C22 (EN 2.4602), Alloy C276 (EN 2.4819), S32750 Duplex (EN 1.4410) |
| Software | ViscoLink PC-based data acquisition & logging |
| Brand | Hydramotion |
|---|---|
| Origin | United Kingdom |
| Model | XL7-LR |
| Measurement Range | 0–1 cP to 0–10⁹ cP |
| Accuracy | ±1% of reading or ±1 digit |
| Repeatability | ±0.3% of reading or ±1 digit |
| Response Time | 1 second |
| Temperature Range (Standard) | −50°C to +150°C |
| HT Option | −50°C to +400°C |
| Pressure Rating | Standard process-rated fittings |
| Process Connections | Tri-clamp, RJT, IDF, DIN, SMS, Varivent®, NPT, BSPP, custom flanges |
| Electrical Interface | Digital intrinsically safe (IS) output |
| Enclosure Rating | IP67 |
| Wetted Materials | Standard 316/316L stainless steel (EN 1.4401 / 1.4404) |
| optional alloys | Alloy C22 (EN 2.4602), Alloy C276 (EN 2.4819), S32750 duplex (EN 1.4410) |
| Surface Finish | Ra < 0.4 µm (electropolished standard) |
| CIP Compatibility | Fully compatible |
| Hazardous Area Certification | ATEX 2014/34/EU, IECEx Ex ia IIC T1–T6 Ga, Ex ia IIIC T135°C Da, UL/cUL Class I Div 1 Groups A–D, IS certified for Zone 0 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LDS3000 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UL1000 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UL1000 FAB |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UL5000 |
| Pricing | Upon Request |
| Brand | Instrulink |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | 3.101.0000 |
| Pricing | Upon Request |
| Brand | SPG |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MN-20S |
| Pricing | Available Upon Request |
| Operating Pressure | Up to 0.3 MPa |
| Membrane Tube Dimensions | Ø10 mm × 20 mm (Effective Length: 10 mm) |
| Pore Size | 1 µm (Standard) |
| Optional Materials | SUS304, SUS316 Stainless Steel |
| Sealing Material | FKM O-Ring |
| Gas Inlet Connection | 6 mm OD Tubing |
| Device Footprint | W 62 mm × H₁ 34 mm |
| Adjustable Shaft Length (H₂) | 20–500 mm |
| Sample Volume Range | 100 mL – 2 L |
| Accessories Not Included | Main pressure gauge, gas cylinder, primary pressure regulator, shut-off valve, vent valve, secondary pressure regulator, tubing, or pressure gauges |
| Optional Accessories | Regulated gas supply kits, calibrated pressure manifolds, stainless-steel fluidic manifolds, and ISO-compliant mounting fixtures |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-manufactured under Thermo Fisher specifications) |
| Model | Invitrogen™ EVOS™ S1000 |
| Pricing | Available upon Request |
| Brand | iTEST17 |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | ACM-LBRIX02 |
| Price Range | USD 4,200 – 7,000 |
| Brix Range Options | 0.00–35.00%, 0.00–80.00%, or 0.00–100.00% (selectable) |
| Accuracy Options | ±0.5%, ±0.1%, or ±0.05% Brix (selectable) |
| Operating Temperature | up to 100 °C |
| Max Process Pressure | 1.0 MPa |
| Temp Measurement Range | 0–100 °C |
| Process Temp Tolerance | −30 to +150 °C |
| Auto Temp Compensation Range | 5–100 °C |
| Wetted Materials | SUS 316L stainless steel & sapphire optical interface |
| Installation | Clamp, flange, or threaded |
| Output Signals | 4–20 mA, 0–10 V, relay, RS485 (Modbus RTU) |
| Display | High-resolution touchscreen HMI |
| Control Logic | Integrated PID, high/low limit control, programmable cleaning cycles, alarm logic, data logging with power-fail retention |
| Power Supply | 110/220 VAC, 50/60 Hz, ≤100 W |
| Ambient Operating Temp | 0–50 °C |
| Brand | Itioture |
|---|---|
| Model | ACDR-B85 |
| Measurement Range | Brix 0–85%, Temperature 0–60°C |
| Accuracy | ±0.1% Brix |
| Resolution | 0.01% Brix |
| Output | 4–20 mA (concentration), RS485 Modbus RTU |
| Power Supply | DC 24 V, 5 VA |
| Pressure Rating | 1.5 MPa (max) |
| Temperature Limit | 100°C (process fluid) |
| Enclosure Rating | IP67 |
| Installation | Clamp-type inline (standard), optional threaded or flanged mounting |
| Optional Accessories | ACL-02S pipe adapter, ACL-03S ultrasonic cleaning module |
| Brand | JENCO |
|---|---|
| Origin | USA |
| Model | 3675 |
| pH Range | -2.00 to 14.00 pH |
| Resolution | 0.01 pH |
| Accuracy | ±0.05 pH |
| Temperature Compensation | Automatic, 0–100 °C |
| Dimensions | 96 × 48 × 172 mm |
| Weight | 0.45 kg |
| Output | Isolated 4–20 mA |
| Relay Outputs | 2 programmable relays |
| Display | LCD |
| Brand | JENCO |
|---|---|
| Origin | USA |
| Model | 6010M |
| Measurement Range | pH: –2.00 to 16.00 |
| ORP | –2000 to +2000 mV |
| Temperature | –10.0 to 130.0 °C |
| Resolution | 0.01 pH, 1 mV, 0.1 °C |
| Accuracy | ±0.01 pH |
| Dimensions | 186 × 70 × 37 mm |
| Weight | 0.26 kg |
| Brand | JENCO |
|---|---|
| Origin | USA |
| Model | JENCO 6219 |
| pH Range | -2.000–16.000 pH |
| pH Resolution | 0.01/0.001 pH |
| pH Accuracy | ±0.1% of full scale ±1 digit |
| ORP Range | -1999.9–1999.9 mV |
| ORP Resolution | 1/0.1 mV |
| ORP Accuracy | ±0.1% of full scale ±1 digit |
| Ion Concentration Range | 0.0–119.8 conc. |
| Ion Resolution | 0.05/0.1 |
| Ion Accuracy | ±2 digits |
| Temperature Range | -5.0–125.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Input Impedance | >10¹³ Ω |
| Temperature Sensor | 10 kΩ thermistor (25 °C) |
| Calibration | Auto two-point with standard buffers (pH 4.00, 6.86, 9.18) |
| Endpoint Detection & Hold Function | Yes |
| Data Storage | Calibration history and settings |
| Communication Interface | RS-232C |
| Power Supply | AC adapter (DC 9 V output) or 6 × AA batteries |
| Dimensions | 250 × 240 × 100 mm |
| Weight | 1.07 kg (including batteries) |