- All
- Favorite
- Popular
- Most rated
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | CS844 |
| Measurement Principle | Infrared Absorption |
| Heating System | High-Frequency Induction Furnace |
| Carbon/Sulfur Range | 0.6 ppm – 6 wt% |
| Analysis Time | < 50 seconds |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | H836EN |
| Instrument Type | Hydrogen Analyzer |
| Detection Range | 0.01–100 ppm (w/w) |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Type | Hydrogen Analyzer |
| Model | RHEN602 |
| Detection Range | 0.05 ppm – 500 ppm |
| Precision | < 0.02 ppm |
| Sample Capacity | Up to 6 g |
| Furnace Type | Programmable Graphite Electrode Furnace |
| Calibration Options | Certified Reference Materials (CRMs) and Standard Gases |
| Compliance | Designed for GLP/GMP environments with audit-trail-capable software |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | DH603 |
| Instrument Type | Hydrogen Analyzer |
| Measurement Principle | Thermal Extraction with Solid-State Detection |
| Temperature Range | Ambient to 1100 °C |
| Sample Form | Solid Metallic Specimens (Ferrous Alloys, Weld Metals, Castings, Forgings) |
| Optional Accessories | Diffusible Hydrogen Sampler, Residual Hydrogen Sampler, Vacuum Sampling Probes for Molten Metal |
| Calibration Method | Standardless Gas Calibration via Internal Reference Signal Stabilization |
| Compliance | Designed to Support ASTM E1442, ISO 3690, AWS A4.3, and EN ISO 17025–accredited laboratory workflows |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | SC832 |
| Measurement Principle | Infrared Absorption Spectroscopy |
| Heating System | Resistance Furnace |
| Measurement Range | C: 0.0175 mg to 200 mg |
| S | 0.0035 mg to 98 mg |
| Analysis Time | < 100 s |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Instrument Type | Dumas Combustion-Based Elemental Analyzer |
| Application Focus | Total Nitrogen, Protein, Carbon, Sulfur, and/or Oxygen Determination in Organic and Inorganic Matrices |
| Model Family | TruSpec® Micro, TruSpec® Soil, TruSpec® CHN, TruSpec® CS, TruSpec® CNS (Configurable per application) |
| Compliance | ASTM D5142, D6347/D6347M, D7329, ISO 13878, AOAC 992.15, 993.13, 2001.11, USP <467>, EPA Method 440.1, EN ISO 13878 |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Type | Imported Instrument |
| Model | CS744 |
| Measurement Principle | Infrared Absorption |
| Heating System | High-Frequency Induction Furnace |
| Analysis Time | 40 s |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | CHN828 |
| Pricing | Upon Request |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | TC-500 |
| Instrument Type | Oxygen and Nitrogen Analyzer |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Model | O836Si |
| Instrument Type | Oxygen Analyzer |
| Detection Range | 0.03–150 ppm |
| Analytical Precision | ±0.015 ppm |
| Analysis Time | 110 s |
| Detector | Non-Dispersive Solid-State Infrared (NDIR) |
| Furnace | Programmable Pulse Electrode Furnace with Power & Current Control |
| Sample Introduction | Flip-Action Loading Port |
| Output Units | ppma and ppmw |
| Peak Separation Method | Surface Oxide vs. Bulk Oxide Quantification |
| Blank Level | Ultra-Low Background |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | ON736 |
| Analysis Time | 85 s |
| Detection Principle | Inert Gas Fusion Coupled with Non-Dispersive Infrared (NDIR) and Thermal Conductivity Detection (TCD) |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | FP628 |
| Instrument Principle | Dumas Combustion Method |
| Analysis Time | 4.5 min per sample |
| Nitrogen Range | 0.04–50 mg absolute |
| Precision | ±0.02 mg or 0.5% RSD (whichever is greater) |
| Sample Mass | up to 750 mg (typical 500 mg) |
| Readability | 0.0001% w/w |
| Detector | Thermal Conductivity (TC) Cell |
| Carrier Gas | Helium (99.99%, 35 psi ±10%) |
| Combustion Gas | Oxygen (99.99%, 35 psi ±10%) |
| Assist Gas | Oil-free, dry compressed air (40 psi ±10%) |
| Furnace Temp | Primary furnace up to 950 °C, secondary furnace up to 1050 °C |
| Autosampler | 30-position (expandable to 120 via stacking) |
| Dimensions | 81 × 70 × 76 cm (H×W×D) |
| Weight | 124 kg (net), 147 kg (shipping) |
| Power | 230 V AC ±10%, 50/60 Hz, single-phase, 12 A, 4000 BTU/hr cooling requirement |
| Compliance | ASTM D515, ISO 14891, AOAC 992.15, USP <282>, FDA 21 CFR Part 11 ready (with optional audit trail module) |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | CS600 |
| Measurement Principle | Infrared Absorption Spectroscopy |
| Heating System | High-Frequency Induction Furnace |
| Measurement Range | Not Specified |
| Sensitivity | Not Specified |
| Precision | Not Specified |
| Analysis Time | Not Specified |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer | LECO Corporation |
| Type | Imported Instrument |
| Model | CHNS628 |
| Price | Upon Request |
| Carbon Range | 0.02–175 mg C |
| Hydrogen Range | 0.1–12 mg H |
| Nitrogen Range | 0.04–50 mg N |
| Sulfur Range | 0.05–50 mg S |
| Precision | C: ±0.01 mg or 0.5% RSD (whichever greater), H: ±0.05 mg or 1.0% RSD, N/S: ±0.02 mg or 0.5% RSD |
| Sample Mass | CHN mode ≤250 mg (typ. 100 mg), CN mode ≤500 mg (typ. 250 mg), FP/N mode ≤750 mg (typ. 500 mg) |
| Readability | 0.0001% |
| Analysis Time | 4.5 min |
| Detection | CO₂/H₂O via NDIR |
| Carrier Gas | He (99.99%, 35 psi ±10%) |
| Combustion Gas | O₂ (99.99%, 35 psi ±10%) |
| Drive Air | Oil-free, dry compressed air (40 psi ±10%) |
| Furnace | Dual-zone resistive furnace (primary + secondary), up to 1050 °C |
| Autosampler | 30-position (expandable to 120) |
| Ambient | 15–35 °C, 20–80% RH non-condensing |
| Dimensions | 81 × 70 × 76 cm (H×W×D) |
| Weight | 124 kg (operational), 147 kg (shipping) |
| Power | 230 V AC ±10%, 50/60 Hz, single-phase, 12 A, 4000 BTU/hr |
| Software | LECO Windows-based application with audit trail, method management, and GLP-compliant reporting |
| Brand | LECO |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | ONH836 |
| Analysis Range | 0.00005–50 mg |
| Instrument Type | Oxygen-Nitrogen-Hydrogen Analyzer |
| Method | Inert Gas Fusion (Graphite Crucible, Pulse Heating) |
Show next