Life Science Instruments
Filter
Showing 6001–6030 of 6354 results
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DKZ Series |
| Price Range | USD 980 – 3,300 (FOB Shanghai) |
| Instrument Type | Water Bath Constant-Temperature Orbital Shaker |
| Oscillation Frequency | 30–180 rpm |
| Oscillation Amplitude | 30 mm or 40 mm (specify at order) |
| Temperature Range | RT+5°C to 99°C (standard), or 10°C to 99°C (low-temperature variant) |
| Shelf Capacity | 20 standard shake flasks (e.g., 250 mL Erlenmeyer) |
| Construction | Stainless Steel 304 Interior & Lid |
| Control System | Microprocessor-Based PID Temperature Controller with Timer |
| Safety Features | Over-Temperature Audio-Visual Alarm, Heater Open-Circuit Detection, Sensor Fault Diagnostics, Upper/Lower Limit Thermal Alerts |
| Drive System | AC Gear Motor with Stepless Speed Regulation |
| Optional | Multi-Stage Programmable Controller (7 programs × 63 steps |
| time per step | 1–99 h 59 min) |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DV-2006L |
| Price Range | USD 1,850 – 3,420 (FOB Shanghai) |
| Instrument Type | Air-Jacketed Constant Temperature Orbital Shaker |
| Timer Range | 0–5999 min |
| Oscillation Speed | 40–300 rpm |
| Orbit Diameter | 20 mm |
| Temperature Range | RT+5°C to 65°C (or 5°C to 65°C with external calibration verification) |
| Shelf Configuration | Single Platform |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GHP |
| Price Range | USD 780 – 2,030 (FOB) |
| Air Circulation | Natural Convection |
| Control Method | Microprocessor-Based PID Controller with Keypad Interface |
| Temperature Range | RT + 5°C to 65°C |
| Temperature Fluctuation | ±0.3°C |
| Temperature Uniformity | ±0.5°C (at 37°C, measured at 9 points per IEC 61000-4-2 compliant test protocol) |
| Capacity | Configurable (standard variants: 60 L, 120 L, 240 L) |
| External Dimensions | Varies by capacity — refer to technical datasheet |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Air-Bath Constant-Temperature Orbital Shaker |
| Timer Range | 0–5999 min |
| Oscillation Frequency | 40–300 rpm (model-dependent variants: 40–250 rpm |
| Oscillation Amplitude | 20 mm |
| Platform Quantity | 1 |
| Heating Capability | Up to ≥100 °C |
| Drive System | Brushless DC Motor with Adjustable Starting Torque |
| Control Interface | Microprocessor-Based LCD Display with Menu-Driven Operation |
| Safety Features | Power-Failure Recovery, Overload Protection, Auto-Stop on Excessive Vibration |
| Programmability | Multi-Step Ramp/Soak Sequencing (Optional) |
| Platform Fixture | Standard Aluminum Spring Clamp (compatible with Erlenmeyer flasks, test tubes, microplates) |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model Variants | HZQ-211, HZQ-311, HZQ-211C, HZQ-311C |
| Timer Range | 0–5999 min |
| Oscillation Frequency | 40–300 rpm |
| Oscillation Amplitude | 26 mm |
| Temperature Range | RT+5°C to 65°C (HZQ-211/311) or 4°C to 65°C (HZQ-211C/311C) |
| Shelf Quantity | 1 platform |
| Drive Mechanism | Triple-Eccentric Shaft Balanced Drive |
| Motor Type | Brushless DC Motor |
| Control System | Microprocessor-Based PID for Temperature & Speed |
| Safety Features | Independent Over-Temperature Cut-off, Auto-Stop on Door Opening, Splash-Resistant Start Control |
| Interface Options (Optional) | RS-485, USB Data Export (U-disk), Multi-Stage Programmable Control (Temp/Speed/Time), Illumination Module, Humidity Monitoring & Control |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HZQ Series |
| Price Range | USD 4,750 – 7,880 (FOB Shanghai) |
| Instrument Type | Air-Jacketed Constant-Temperature Orbital Shaker |
| Timer Range | 0–5999 min |
| Oscillation Speed | 40–300 rpm |
| Orbit Diameter | 26 mm |
| Temperature Range | RT+5°C to 65°C (standard) |
| Dual-Shelf Design | 2 independently usable platforms |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Air-Bath Constant-Temperature Oscillator / Shaker |
| Model Numbers | HZQ-3111, HZQ-3112, HZQ-3221, HZQ-3222 |
| Timing Range | 0–500 h |
| Orbit Diameter | 26 mm |
| Temperature Control | Ambient-only (No Heating/Cooling) |
| Deck Quantity | 1 or 2 stainless-steel platforms |
| Drive System | Triple-Eccentric-Shaft Balanced Drive |
| Motor Type | Brushless DC Motor with High Starting Torque and Wide Speed Regulation |
| Power Failure Recovery | Auto-Restore of Set Parameters |
| Safety Protection | Real-Time Speed Monitoring with Over/Under-Speed Shutdown |
| Programmable Mode (Optional) | Multi-Step Frequency & Time Sequencing |
| Display | Backlit LCD with Simultaneous Parameter Readout |
| Compliance | Designed for GLP-compliant laboratory workflows |
| Brand | YIHENG |
|---|---|
| Model | HZQ-101 / HZQ-102 / HZQ-103 / HZQ-111 / HZQ-112 |
| Type | CO₂-Compatible Stackable Shaking Incubator |
| Amplitude | 26 mm |
| Temperature Range | RT+5°C to 65°C (4°C to 65°C with optional refrigeration module) |
| Temperature Uniformity | ±0.3°C at 37°C |
| External Dimensions (W×D×H) | 1000×670×920 mm / 1000×1270×920 mm / 1000×1870×920 mm |
| Construction | 304 Stainless Steel Interior Chamber |
| Drive System | Triple-Eccentric-Balance Orbital Drive |
| Motor | Brushless DC, Continuous Duty Rated |
| Control Interface | Full-Color Touchscreen Display |
| Data Interface | Standard USB (U-disk logging), Optional RS-485 |
| Compliance | Designed for GLP-compliant labs |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | HZQ-X300C |
| Quotation | USD 3,500 (FOB Shanghai) |
| Instrument Type | General-Purpose Orbital Shaker |
| Timer Range | 0–5999 min |
| Oscillation Speed | 40–300 rpm |
| Orbit Diameter | 20 mm |
| Temperature Range | 5–65 °C |
| Shelf Quantity | 1 stainless-steel platform |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HZQ/THZ |
| Price Range | USD 1,850 – 3,420 (FOB Shanghai) |
| Instrument Type | Air-Bath Constant-Temperature Shaker / Orbital Incubator-Shaker |
| Timer Range | 0–5999 min |
| Oscillation Frequency | 40–300 rpm |
| Orbit Diameter | 20 mm |
| Temperature Range | RT+5°C to 65°C |
| Shelf Configuration | Single or Dual Platform |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HZQ/THZ Series |
| Price Range | USD 1,850 – 3,420 (FOB Shanghai) |
| Instrument Type | Air-Jacketed Constant-Temperature Orbital Shaker |
| Timer Range | 0–5999 min |
| Oscillation Frequency | 40–300 rpm |
| Oscillation Amplitude | 20 mm |
| Temperature Range | RT+5°C to 65°C (or 5°C to 65°C with optional pre-cooling) |
| Deck Configuration | Single-Deck or Double-Deck |
| Brand | YiHeng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LHR-500F |
| Heating Method | Air-jacketed |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high temp), ±1.0 °C (at low temp) |
| Temperature Uniformity | ±2.5 °C (measured at 25 °C) |
| Internal Dimensions (W×D×H) | 670×720×1020 mm |
| External Dimensions (W×D×H) | 850×1100×1930 mm |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | LRH Series |
| Price Range | USD 1,300 – 5,450 (FOB Shanghai) |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Air Circulation | Natural Convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C at High Temp |
| Temperature Uniformity | ±1.5 °C |
| External Dimensions (W×D×H, mm) | 530×560×1080 |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | LRH |
| Price Range | USD 2,150 – 8,800 (FOB Shanghai) |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Temperature Range | LRH-L: −10 °C to +65 °C |
| LRH-A | −20 °C to +65 °C |
| LRH-B | −40 °C to +65 °C |
| Temperature Uniformity | ±0.5 °C (at ≥25 °C), ±1.0 °C (at ≤0 °C) |
| Internal Volume Options | 150 L, 250 L, 400 L, 600 L (per catalog) |
| External Dimensions | Varies by capacity (see technical datasheet) |
| Brand | YIHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based Refrigeration |
| Convection Mode | Natural Convection |
| Temperature Range | −10 °C to +65 °C |
| Temperature Uniformity | ±0.5 °C (at ≥25 °C), ±1.0 °C (at ≤0 °C) |
| Interior Dimensions (W×D×H) | 500 mm × 400 mm × 600 mm |
| External Dimensions (W×D×H) | 650 mm × 770 mm × 1320 mm |
| Optional Features | RS485 Interface, Thermal Printer Output, Multi-Stage Programmable Controller (up to 30 segments, 1–5999 min/segment) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | LRH-250(F) |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based |
| Convection Type | Natural convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C at high setpoints |
| Temperature Uniformity | ±1.5 °C (measured at 25 °C) |
| Interior Dimensions (W×D×H) | 503 × 370 × 808 mm |
| Exterior Dimensions (W×D×H) | 600 × 630 × 1360 mm |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | LRH-500F |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based Refrigeration |
| Convection Type | Natural Convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high setpoints), ±1.0 °C (at low setpoints) |
| Temperature Uniformity | ±2.5 °C (measured at 25 °C reference point) |
| Internal Dimensions (W×D×H) | 670×720×1020 mm |
| External Dimensions (W×D×H) | 850×1100×1930 mm |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LRH-70F |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based |
| Air Circulation | Natural Convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high temp), ±1.0 °C (at low temp) |
| Temperature Uniformity | ±1.5 °C (measured at 25 °C) |
| Interior Dimensions (W×D×H) | 400 × 350 × 500 mm |
| External Dimensions (W×D×H) | 530 × 560 × 1080 mm |
| Brand | YiHeng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | LRH-Series |
| Price Range | USD 1,400–2,800 |
| Heating Method | Air-Jacketed |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high setpoints), ±1.0 °C (at low setpoints) |
| Temperature Uniformity | ±1.5 °C (measured at 25 °C reference point) |
| Interior Dimensions (W×D×H) | 400 × 350 × 500 mm |
| External Dimensions (W×D×H) | 530 × 560 × 1080 mm |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model Numbers | LRH-800F, LRH-1000F, LRH-1500F |
| Price Range | USD 7,000–14,000 (FOB Shanghai) |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Temperature Range | Standard Mode (F): 0–60°C |
| Low-Temp Mode (L) | −10–60°C |
| Temperature Fluctuation | ±0.5°C (at high setpoints), ±1.0°C (at low setpoints) |
| Temperature Uniformity | ±2.5°C (measured at 25°C reference point) |
| Internal Dimensions (W×D×H) | 730 × 750 × 1480 mm |
| External Dimensions (W×D×H) | 870 × 1085 × 2065 mm |
| Brand | Yiheng |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Models | LRH-150-2B, LRH-100-4B, MJ-150-2B, MJ-100-4B |
| Price Range | USD 3,400 – 6,800 (FOB Jiangsu) |
| Control Method | Mechanical Push-Button Interface |
| Air Circulation | Natural Convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at both high and low setpoints) |
| Temperature Uniformity | ±1 °C (measured at 25 °C reference point) |
| Chamber Configuration | Dual-chamber (2B) or Quad-chamber (4B) |
| Interior Material | Mirror-Finish Stainless Steel (AISI 304), Radius-Corner Design |
| Shelf Adjustability | Yes, stepless vertical positioning |
| Compressor | Brand-name hermetic refrigeration unit with R134a or R600a eco-friendly refrigerant |
| Temperature Controller | Microprocessor-based PID controller with digital LCD display, timer function, and over-temperature cut-off (optional) |
| Fan Speed Control | Three-level manual adjustment |
| Data Output | Optional RS485 port or thermal printer interface (for temperature logging) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | MGC Series |
| Price Range | USD 2,500 – 11,200 (FOB Shanghai) |
| Illumination Configuration | Triple-Side Uniform LED Lighting |
| Light Source | High-Efficiency White & Blue-Enhanced LED Arrays |
| Temperature Control Range | 4–50°C (dark mode) |
| Temperature Uniformity | ±1°C (at setpoint, measured at 5 reference points per shelf) |
| Illuminance Range | 0–30,000 lux, 6-step digital adjustment (0%, 20%, 40%, 60%, 80%, 100%) |
| Internal Chamber Volume | 965 × 580 × 1430 mm (W×D×H) |
| External Dimensions | 1475 × 890 × 1780 mm (W×D×H) |
| Programmable Cycles | Up to 30 user-defined programs, each supporting time segments from 1 to 99 hours |
| Safety System | Independent dual-limit temperature alarm (hardware + software redundancy) |
| Communication Interface | RS485 port (optional USB-to-RS485 adapter for PC connectivity) |
| Optional Accessories | CO₂ inlet port + NDIR CO₂ sensor module (0–2000 ppm, ±30 ppm accuracy), humidity control upgrade (not standard) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | MGC Series |
| Illumination Configuration | Triple-Sided LED Lighting |
| Temperature Range (with light) | 10–50 °C |
| Temperature Range (dark) | 0–50 °C |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 50–90 % RH |
| Light Source | High-Efficiency White LED Arrays |
| Control System | Microprocessor-Based Programmable Controller |
| Programmable Cycles | Up to 30 Programs (Optional), Each with Duration 1–99 Hours |
| Safety Features | Independent Over-Temperature Cut-Off Alarm |
| Communication Interface | RS485 Port (Optional) |
| Optional Add-ons | CO₂ Inlet Port + IR-Based CO₂ Controller (Imported Sensor) |
| Interior Material | Mirror-Finish Stainless Steel with Radius-Corner Transition |
| Shelving | Adjustable and Removable Stainless Steel Racks |
| Refrigeration System | Imported Compressor with Eco-Friendly Refrigerant (R134a or Equivalent) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | MGC |
| Price Range | USD 2,500 – 11,200 (FOB Shanghai) |
| Illumination Configuration | Triple-side LED lighting |
| Light Source | High-efficiency white LED arrays |
| Temperature Control Range | 4–50°C (dark), 10–50°C (with illumination) |
| Temperature Uniformity | ±1°C |
| Humidity Control Range | 50–90% RH |
| Illuminance Range | 0–25,000 lux (adjustable in 100-lux increments, calibrated per IEC 60825-1) |
| Chamber Capacity | 150 L to 800 L (standard models: MGC-150, MGC-250, MGC-400, MGC-800) |
| External Dimensions | Varies by model (e.g., MGC-250: 700 × 720 × 1,850 mm W×D×H) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MGC-350HP |
| Illumination Method | Triple-side LED Illumination |
| Light Source | High-efficiency White LED Arrays |
| Temperature Range (with light) | 10–50 °C |
| Temperature Range (dark) | 4–50 °C |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 50–90 % RH |
| Illuminance Range | 0–20,000 lx, 6-step Adjustable |
| Internal Dimensions (W×D×H) | 520×550×1140 mm |
| External Dimensions (W×D×H) | 830×850×1850 mm |
| Programmable Cycles | Up to 30 Programs (Optional) |
| Each Program Duration | 1–99 Hours (Optional) |
| Safety Features | Independent Over-Temperature Cut-off Alarm (Standard) |
| Communication Interface | RS485 Port for PC Data Logging & Remote Monitoring (Optional) |
| CO₂ Integration Option | Optional CO₂ Inlet Port + IR-based CO₂ Controller (Imported Sensor) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MGC-450HP-2 |
| Illumination Method | Shelf-Mounted LED Lighting System |
| Temperature Range | 10–50 °C (with light), 0–50 °C (dark) |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 50–90 % RH |
| Light Intensity Range | 0–20,000 lx / 0–25,000 lx, 6-Step Adjustable |
| Internal Dimensions | 520×550×1140 mm / 700×550×1140 mm |
| External Dimensions | 830×850×1850 mm / 950×850×1850 mm |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Models | MGC-BP-2, MGC-HP-2 |
| Price Range | USD 3,300 – 24,800 (FOB Shanghai) |
| Illumination Method | Shelf-Mounted LED Lighting System |
| Temperature Control Range | 10–50°C (with illumination), 0–50°C (without illumination) |
| Temperature Uniformity | ±1°C |
| Humidity Range | 50–90% RH |
| Illuminance Range | Up to 300 µmol/m²/s (PAR), adjustable per shelf |
| Illuminance Control | Stepless dimming via microprocessor feedback loop |
| Chamber Capacity | 200 L to 1,000 L (model-dependent) |
| External Dimensions | 750 × 750 × 1,850 mm (MGC-BP-2) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MJ Series |
| Price Range | USD 1,280 – 5,890 |
| Control Interface | Digital Touchscreen |
| Air Circulation | Natural Convection |
| Temperature Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high setpoints), ±1.0 °C (at low setpoints) |
| Temperature Uniformity | ±1.5 °C to ±2.5 °C (measured at 25 °C reference point) |
| Humidity Range | 60–85 % RH |
| Capacity Options | See Technical Brochure |
| External Dimensions | See Technical Brochure |
| Internal Dimensions | See Technical Brochure |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | MJ-250-II |
| Control Interface | Digital Touchscreen |
| Air Circulation | Natural Convection |
| Temperature Range | 10–45°C (dry), 15–45°C (with humidification) |
| Temperature Fluctuation | ±0.5°C (high-temp setpoints), ±1.0°C (low-temp setpoints) |
| Temperature Uniformity | ±1.5°C to ±2.5°C (measured at 25°C reference point) |
| Humidity Range | 60–85% RH |
| Chamber Capacity | 250 L |
| Internal Construction | Mirror-finish stainless steel chamber with radius-corner design |
| PID Temperature Controller | Microprocessor-based, with timer function |
| Safety System | Independent over-temperature cut-off alarm (optional) |
| Data Output | RS485 interface or thermal printer port (optional) |
| Display | LCD screen with menu-driven navigation |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MJ-Series |
| Price Range | USD 1,400 – 5,700 (FOB) |
| Air Circulation | Natural Convection |
| Temperature Control Range | 0–60 °C |
| Temperature Fluctuation | ±0.5 °C (at high setpoints), ±1.0 °C (at low setpoints) |
| Temperature Uniformity | ±1.5 °C to ±2.5 °C (measured at 25 °C reference point) |
| External Dimensions (W×D×H) | 530 × 560 × 1080 mm |
| Internal Chamber Dimensions (W×D×H) | 400 × 350 × 500 mm |