Optical Instruments
Filter
Showing 5881–5910 of 7814 results
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Tau |
| Core Technology | Diode-Pumped Solid-State (DPSS) CW Laser |
| Wavelength Options | 473 nm, 532 nm, 561 nm, 660 nm, 671 nm, 1064 nm |
| Output Power Range | 30 mW – 1.5 W (model-dependent) |
| Beam Quality | TEM₀₀ (M² < 1.2) |
| Power Stability | < 0.5–1.0% RMS |
| Polarization Ratio | >100:1 |
| Coherence Length | 3 mm – >100 m |
| MTTF | 400,000 hours |
| Environmental Rating | IP54-equivalent sealed enclosure |
| Compliance | IEC 60825-1:2014 (Class IV), FDA 21 CFR Part 1040.10/1040.11, RoHS, CE |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Taccor Power |
| Core Technology | Solid-State Mode-Locked Oscillator |
| Repetition Rate | 1 GHz |
| Wavelength Range | ~800 nm (±20 nm) |
| Spectral FWHM | >23 nm |
| Pulse Duration | <30 fs |
| Average Output Power | 800 mW – 1.8 W |
| Beam Diameter | 0.8 mm ± 0.3 mm |
| Beam Divergence | 2.0 mrad ± 0.5 mrad |
| M² | <1.2 (sagittal), <1.2 (tangential) |
| Power Stability | ±1% RMS (24 h) |
| Intensity Noise | <0.1% RMS (1 Hz – 1 MHz) |
| Polarization Ratio | >100:1, Horizontal |
| Operating Temperature | 21 °C ± 5 °C |
| Warm-up Time | ≤10 min |
| Pulse Energy | 0.8 nJ – 1.8 nJ |
| Warranty | 3 years / 9000 operational hours |
| Brand | Prior |
|---|---|
| Origin | UK |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Queensgate OP400 / NanoScan SP |
| Component Category | Optical Positioning Actuators |
| Travel Range | 400 nm / 600 nm |
| Resolution | Sub-nanometer (via integrated capacitive sensing) |
| Load Capacity | Up to 500 g |
| Settling Time | Optimized for high-speed z-stacking |
| Compatibility | Prior, Nikon, Olympus, Zeiss, Leica, Okolabs, Tokai Hit microscopes |
| Controller | Queensgate NPC Series |
| Brand | Quest-Innovations |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Condor3-CIE-618 |
| Pricing | Upon Request |
| Sensor | ICX618 (640 × 494 pixels) |
| Optical Architecture | Prism-based trichroic beam splitting with CIE 1931 x̄(λ), ȳ(λ), z̄(λ) spectral filters |
| Frame Rate | Up to 120 fps |
| Bit Depth | 8-bit or 12-bit per channel |
| Triggering | Independent asynchronous triggering per channel |
| Gain & Exposure Control | Per-channel programmable gain and integration time |
| ROI Mode | Region-of-interest acquisition supported |
| Dynamic Range | >56 dB |
| Spectral Output Channels | CIE-X, CIE-Y, CIE-Z (tristimulus) |
| Brand | Quest-Innovations |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Condor5-UAV |
| Pricing | Available Upon Request |
| Brand | Quest-Innovations |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Condor5-VNN-285 |
| Pricing | Available Upon Request |
| Sensor Resolution | 1360 × 1024 per CCD |
| Spectral Channels | 5 (400–500 nm, 500–590 nm, 590–670 nm, 670–850 nm, 850–1000 nm) |
| Frame Rate | Up to 15 fps full-resolution |
| Shutter Modes | Global or Rolling |
| Bit Depth | 8-bit or 12-bit per channel |
| ROI Acquisition | Supported |
| Independent Control | Per-CCD gain, exposure time, and asynchronous triggering |
| Brand | Quorum |
|---|---|
| Origin | United Kingdom |
| Model | PP3010T |
| Type | Cryogenic Transfer System for SEM |
| Application | Cryo-SEM Sample Preparation and In-Situ Cold Stage Integration |
| Temperature Range | Down to –185 °C (Liquid Nitrogen Cooled) |
| Compatibility | Cold Field Emission SEMs (CFEG-SEM), Conventional SEMs with Cryo-Compatible Stages |
| Brand | quTools |
|---|---|
| Origin | Germany |
| Model | quDIS |
| Measurement Principle | Dual-Reference Laser Interferometry with Fabry–Pérot Cavity and Gas Cell (GC) Frequency Stabilization |
| Resolution | 1 pm |
| Relative Distance Stability | < 0.05 nm |
| Absolute Distance Accuracy | < 0.2 nm/mm |
| Wavelength | 1535 nm |
| Linewidth | < 5 MHz |
| Bandwidth | 25 kHz |
| Number of Measurement Channels | 3 |
| Working Distance | 0.1–20 m (sensor-head dependent) |
| Maximum Target Velocity | 1 m/s |
| Laser Output Power | < 400 µW |
| Input Fiber Connector | FC Narrow-Key-Slot |
| Sensor Head Options | Collimated, Focused, Low-CTE (Invar/NiFe), High-Temp, Vacuum-Grade |
| Brand | Qzabre |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | QSM |
| Instrument Type | Magnetic Force Microscope (MFM) |
| Positional Drift Rate | 6 nm/h |
| Sample Size | 25 mm diameter (standard) |
| Scan Range | 90 μm × 90 μm × 15 μm (closed-loop, 0.15 nm resolution) |
| Brand | CactuX |
|---|---|
| Origin | Czech Republic |
| Model | R1-Shadow |
| Component Category | Optical Instrument Component |
| Compatible With | Laboratory Micro-CT, Nano-CT, Dual-Energy CT, 4D Dynamic CT Systems |
| Calibration Reference Sizes | 25 µm, 25 µm, 50 µm, 100 µm |
| Max. Pixel Size Support | 2.5 µm, 2.5 µm, 5.0 µm, 10.0 µm |
| Holder Radius (r) | 1.5 mm, 3.0 mm, 5.0 mm, 10.0 mm |
| Holder Length | 50.5 mm |
| Construction Materials | Carbon Fiber, Polyimide Tape, Stainless Steel |
| Packaging Options | 3-piece, 5-piece, or 10-piece kits |
| Software Integration | ImageJ Plugin + Native Compatibility with Common CT Acquisition Suites (e.g., Bruker CTvox, Thermo Scientific Avizo, Nikon XT, Zeiss Scout) |
| Origin | Canada |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Radial Polarization Converter |
| Pricing | Upon Request |
| Component Category | Light Source |
| Brand | Radiant Vision Systems |
|---|---|
| Origin | USA |
| Model | PM-G |
| Sensor Resolution | 1536 × 1024 px (standard), 3072 × 2048 px (high-res option) |
| Dynamic Range | 14-bit (16,384 gray levels) |
| Luminance Range | 0.001 to 10¹⁰ nit (with ND filters) |
| Photometric Accuracy | Luminance (Y) ±3%, Illuminance ±3%, Chromaticity (x,y) ±0.003 |
| Short-Term Repeatability | Luminance <±0.5%, Chromaticity ±0.0006 |
| Lens Options | Motorized 35 mm, 50 mm, and 100 mm macro lenses with auto-focus and auto-iris |
| Measurement Speed (100 cd/m²) | Luminance-only: 2.3 s (G2/G3 mode) |
| Luminance + Chromaticity | 8 s (G2/G3 mode) |
| FOV | 40°×27° (35 mm), 30°×20° (50 mm), 15°×10° (100 mm macro) |
| Display | 125 mm diagonal LCD touchscreen (800×600) |
| Interface | USB 2.0/3.0, Gigabit Ethernet |
| Dimensions | 181 × 238 × 230 mm (H×W×D) |
| Weight | 4.9 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Compliance | NIST-traceable calibration, ISO 11664, CIE S 014, ASTM E308, USP <1058> for analytical instrument qualification |
| Brand | Radiant Vision Systems |
|---|---|
| Origin | USA |
| Model | SIG-400 |
| Application | Near-field radiometric and photometric characterization of small light sources |
| Compatible Detector | ProMetric® imaging colorimeters and photometers |
| Output Format | Radiant Source Model™ (RSM), IES, EULUMDAT, ASAP, LightTools, TracePro, Zemax-compatible ray sets |
| Software Platform | ProSource® v5.0+ |
| Brand | Radiant Zemmax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Models | IS-LI, IS-VA, IS-SA |
| Pricing | Available Upon Request |
| Brand | Radiant ZEMAX |
|---|---|
| Origin | USA |
| Model | IS-LI |
| Type | Near-Field Imaging Measurement System for Angular Radiometric and Photometric Characterization |
| Application Scope | LED Light Sources, Flat Panel Displays (FPD), Diffusing Materials, Optical Films, Surface Scatter Analysis |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | NFMS0400 / FPMS0400 |
| Type | Near-Field Measurement System for Luminaires |
| Compliance | Supports IESNA LM-79, CIE S 025, ISO/CIE 19476 |
| Software Platform | TrueTest™ v7.0+ |
| Detector Options | ProMetric® Y-series (luminance) and I-series (chromaticity) imaging photometers |
| Angular Range | ±90° in azimuth, ±90° in elevation |
| Spatial Resolution | Up to 9M pixels per image |
| Dynamic Range | ≥1,000,000:1 (typical with HDR acquisition) |
| Calibration Traceability | NIST-traceable luminance & chromaticity standards |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1200 Series |
| Sensor Type | 12-bit CCD with CIE-matched optical filters |
| Measurement Capabilities | Luminance (cd/m²), Illuminance (lux), Radiance (W/sr·m²), Irradiance (W/m²), Luminous Intensity (cd), Radiant Intensity (W/sr) |
| Spatial Resolution | Up to 2.3 megapixels (configurable by model variant) |
| Dynamic Range | >1,000,000:1 (with electronic exposure control) |
| Compliance | ISO/CIE-compliant photometric and radiometric calibration traceable to NIST |
| Software Platform | ProMetric® v3.x or later (supports ASTM E308, CIE 15:2018, IEC 62368-1, and MIL-STD-3009 NVIS requirements) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1400F Series |
| Sensor Resolution | 768×512 / 1536×1024 / 3072×2048 pixels |
| ADC Dynamic Range | 14 bits (16,384 gray levels) |
| Luminance Range | 0.001 to 10¹⁰ nit (with ND filters) |
| Photometric Accuracy | Illuminance ±3%, Luminance (Y) ±3%, Chromaticity (x,y) ±0.003 |
| Short-Term Repeatability | Illuminance <±0.5%, Luminance <±0.5%, Chromaticity ±0.0006 |
| FOV Options | 1°–26° / 3°–50° / 5°–87° |
| Measurement Time (at 100 cd/m²) | 1.8–25 s depending on resolution |
| Interface | USB 2.0 |
| Dimensions | 154 × 242 × 200 mm |
| Weight | 4.8 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Photometric Units | cd/m², cd/cm², fL, nit, mnit, W/sr/m², lux, fc, W/m², cd/sr, CIE (x,y), (u′,v′), CCT (K) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | PM-1600F Series |
| Detector Type | TE-Cooled Scientific CCD |
| Resolution | 512 × 512 or 1024 × 1024 pixels |
| Dynamic Range | 16-bit (65,536 gray levels) |
| Minimum Luminance | 0.0005 cd/m² |
| Maximum Luminance (with ND filters) | 10¹⁰ cd/m² |
| Photometric Accuracy | ±3% for luminance (Y) and illuminance |
| Chromaticity Accuracy | ±0.003 in CIE x,y |
| Short-Term Repeatability | <±0.5% for luminance, ±0.0006 in CIE x,y |
| Measurement Time (at 100 cd/m²) | 2–9 sec depending on resolution and binning |
| FOV Range | 2°–38° (512×512), 5°–80° (1024×1024) |
| Interface | USB 2.0 |
| Dimensions | 154 mm (H) × 242 mm (W) × 200 mm (D) |
| Weight | 4.8 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Software | ProMetric® v5.x or later |
| Compliance | ASTM E308, ISO/CIE 11664, CIE 15:2018, USP <1058>, FDA 21 CFR Part 11 (audit trail & electronic signature support) |
| Brand | Radiant Zemmax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PM-I |
| Pricing | Available Upon Request |
| CCD Resolution | 3296 × 2472 px (Standard), 4896 × 3264 px (High-Resolution Option) |
| Dynamic Range | 12-bit (4096 grayscale levels) |
| Luminance Range | 0.01 to 10¹⁰ nit (with ND filters) |
| Photometric Accuracy | Illuminance ±3%, Luminance (Y) ±3%, Chromaticity (x,y) ±0.003 |
| Short-Term Repeatability | Illuminance <±0.5%, Luminance <±0.5%, Chromaticity ±0.0006 |
| Measurement Speed (100 cd/m²) | Luminance-only: 0.7 s |
| Luminance + Chromaticity | 3.7 s |
| Lens Options | 20 mm, 35 mm, 50 mm, 100 mm macro |
| Focus & Aperture | Motorized |
| Display | 125 mm diagonal LCD touchscreen (800 × 600) |
| Interface | USB 2.0/3.0, Gigabit Ethernet |
| Dimensions | 181 × 238 × 230 mm (H × W × D) |
| Weight | 4.9 kg |
| Operating Temperature | 0–30 °C |
| Operating Humidity | 20–70% RH (non-condensing) |
| Brand | Radiant Vision Systems (formerly Radiant Zemax) |
|---|---|
| Origin | USA |
| Model Series | ProMetric |
| Sensor Types | 10-bit, 14-bit, and 16-bit scientific-grade cooled CCD/CMOS imagers |
| Dynamic Range | Up to 1,000,000:1 (depending on model and configuration) |
| Spatial Resolution | Up to 29 megapixels (IC-PMIXX) |
| Measurement Capabilities | Luminance, Illuminance, Luminous Intensity, Luminous Flux, Radiance, Irradiance, Radiant Intensity, Radiant Flux, CIE x,y & u',v' Chromaticity, Correlated Color Temperature (CCT) |
| Compliance | NIST-traceable calibration, ISO/CIE-compliant photometric and colorimetric response |
| Software Platform | TrueTest™ and PM-Series™ software with FDA 21 CFR Part 11–compliant audit trail options |
| Interface | GigE Vision, USB3, or Camera Link (model-dependent) |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SIG-300 |
| Pricing | Upon Request |
| CCD Type | Full-frame, thermoelectrically cooled CCD |
| CCD Dynamic Range | 16-bit (65,536:1) |
| Resolution Options | 512 × 512 or 1024 × 1024 pixels |
| FOV (Standard) | 2 mm, 4 mm, 8 mm (512×512) |
| FOV (Micro Extension) | 0.5 mm, 1.2 mm |
| FOV (Large Extension) | 40 mm, 80 mm |
| Color Filter Set | CIE 1931 XYZ tristimulus filters |
| Neutral Density Filters | ND0 to ND5 |
| Polar Rotation Range | −10° to +370° |
| Azimuthal Tilt Limit | ±24° from lamp axis |
| Angular Step Resolution | 0.10°/min |
| Mechanical-Optical-Software Runout | < 0.025 mm |
| System Dimensions | 120 cm × 77 cm × 177 cm |
| Minimum Operating Footprint | 120 cm × 120 cm |
| Mass | 360 kg |
| Structural Frame | Welded steel cast housing with thermal stability design |
| Software Platform | SIG 2.0 — supports luminance, illuminance, chromaticity (CIE x,y |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | SIG-310 |
| CCD Type | Full-frame, thermoelectrically cooled CCD |
| Dynamic Range | 16-bit (65,536:1) |
| Resolution Options | 512 × 512 or 1024 × 1024 pixels |
| FOV (Standard) | 6–160 mm (512×512) |
| FOV (Macro) | 300 mm (512×512 only) |
| Color Filters | CIE 1931 XYZ tristimulus with ND filters (ND0–ND5) |
| Polar Rotation | −10° to +370° |
| Azimuthal Tilt | ±20° from lamp axis |
| Angular Step Resolution | 0.10°/min |
| Mechanical-Optical-Software Runout | ≤0.100 mm |
| System Dimensions | 145 cm × 133 cm × 204 cm |
| Operating Footprint | 343 cm × 312 cm |
| Weight | 640 kg |
| Structural Frame | Welded steel cast body with thermal-stability design |
| Software | SIG 2.0 — supports luminance, illuminance, chromaticity (CIE x,y |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SIG-400 |
| Pricing | Upon Request |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | SIG300 / SIG310 / SIG400 |
| Application Scope | Near-field luminance, chromaticity, and angular intensity distribution measurement of LEDs, lamp modules, and compact light sources |
| Compliance Framework | Supports ASTM E308, CIE 127, IES LM-79, ISO/CIE 11664 (colorimetry), and FDA/ISO 13485-aligned quality documentation workflows |
| Software Integration | Fully compatible with ProSource® v10+ for RSM generation, ray set export (IES, EULUMDAT, ASAP, LightTools, TracePro), GLP/GMP audit trail logging, and 21 CFR Part 11–compliant user access control |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | VisionCAL |
| Type | Imaging Colorimeter-Based Display Calibration System |
| Application | Pixel-Level Luminance & Chromaticity Calibration of LED Displays |
| Compliance | Designed for ISO 11664, CIE S 014-2/E:2022, and ASTM E308-23 workflows |
| Software Architecture | Windows-based, FDA 21 CFR Part 11–ready audit trail support (optional), GLP/GMP-compatible data logging |
| Brand | Radiant Zemax |
|---|---|
| Origin | USA |
| Model | ZEMAX 13 |
| Type | Optical Design & Illumination Simulation Software |
| Compliance | ASTM E284, ISO/CIE 11664 (Colorimetry), USP <1059>, FDA 21 CFR Part 11 (via optional audit trail module) |
| CAD Integration | Native bidirectional sync with SolidWorks®, Autodesk Inventor®, Creo Parametric® |
| File Formats | STEP, SAT, IGES, STL, IES, LDT, ZMX, FRED, ASAP, LightTools® import/export |
| Programming Interface | ZPL (Zemax Programming Language), MATLAB® interoperability, COM/ActiveX, .NET API, user-defined DLL support |
| Optical Engine | Hybrid sequential/non-sequential ray tracing engine with physical optics propagation (Gaussian, Laguerre-Gaussian, TEM modes), BSDF material modeling, GRIN media, polarization & thin-film stack analysis |
| License Type | Perpetual or subscription-based floating/network license |
| Brand | Radiantis |
|---|---|
| Origin | Spain |
| Model | Oria Blue SHG Module for Ti:Sapphire Oscillators |
| Tuning Range | 340–550 nm (from 680–1080 nm fundamental) |
| Avg. Output Power | >1.2 W @ 410 nm |
| Pulse Width Preservation | <150 fs (fs regime), <180 fs (ps regime) |
| Repetition Rate | 80 MHz |
| Beam Mode | TEM₀₀ |
| Dimensions | 200 × 364 × 155 mm |
| Compliance | CE, RoHS |
| Software Control | Oria Blue Control Suite (Windows-based, USB interface) |
| Mounting | Kinematic, alignment-free platform compatible with standard optical tables |
| Brand | Radiantis |
|---|---|
| Origin | Spain |
| Type | Tunable Femtosecond SHG Frequency Doubler |
| Input Wavelength Range | 990–1550 nm (IR OPO) |
| Output Wavelength Range | 495–775 nm (Visible) |
| Conversion Efficiency | >40% |
| Average Output Power | >400 mW |
| Pulse Duration (FWHM) | <180 fs |
| Beam Diameter (at 525 nm) | 2.5 mm |
| Beam Divergence | 1 mrad |
| Spatial Mode | TEM₀₀ |
| Polarization | Vertical |
| Repetition Rate Compatibility | 80 MHz |
| Dimensions (W×L×H) | 568.0 × 366.5 × 189.2 mm |
| Brand | Raicol |
|---|---|
| Origin | Israel |
| Crystal Type | Periodically Poled KTiOPO₄ (PPKTP) |
| Model | PPLN-OPG (Note: Mislabeling — actual material is PPKTP, not PPLN) |
| Aperture | 1 × 2 mm² |
| Length | Up to 30 mm |
| Transmission Range | 400–4000 nm |
| Surface Flatness | λ/10 @ 633 nm |
| Parallelism | <30 arc sec |
| Perpendicularity | <15 arc min |
| Surface Quality | 10/5 (MIL-PRF-13830B) |
| Coating Options | AR / HR / PR (custom broadband or wavelength-specific) |