Physical Property Testing Instruments
Filter
Showing 841–870 of 12239 results
| Brand | BDC |
|---|---|
| Origin | Germany |
| Model | RDTL-0200 |
| Maximum Test Force | 5000 kN |
| Frequency Range | 80 Hz |
| Host Weight | 150 kg |
| Compliance | ASTM F2477, ISO 25539, CE/EMC Certified |
| Sample Diameter Range | 2.5–50 mm |
| Max Simulated Vessel Length | 400 mm |
| Configurable Fixture Capacity | up to 12 specimens (dependent on geometry) |
| Operating Fluid Temperature | up to 50 °C |
| Power Supply | 240 V |
| Brand | BDC |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Medical Device Testing Equipment |
| Model | VDT3600i |
| Instrument Type | Cardiovascular Implant Fatigue Tester |
| Maximum Test Pressure | 500 mmHg |
| Frequency Range | 3–50 Hz |
| Unit Weight | 160 kg |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | HIAC 9703+ |
| Instrument Type | Optical Liquid Particle Counter |
| Sample Volume Range | 1 mL to 1000 mL |
| Particle Size Detection Range | 0.5 µm to 600 µm |
| Regulatory Compliance | FDA 21 CFR Part 11, ISO 21501-4 |
| Preconfigured Pharmacopoeial Methods | USP <788>, USP <789>, EP 2.9.19, JP 6.07, KP 5.2.10 |
| Software | PharmSpec v5.x with Audit Trail, Electronic Signatures, and Automated Backup/Restore |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | LS 13 320 XR |
| Dispersion Method | Dry & Wet Dispersion |
| Instrument Type | Laboratory Laser Diffraction Analyzer |
| Measurement Range | 10 nm – 3500 µm |
| Repeatability | < ±0.5% |
| Measurement Time | 10 seconds |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Model | LS Series |
| Measurement Range | 17 nm – 2000 µm |
| Accuracy | < 1% |
| Repeatability | < 1% |
| Resolution | Capable of resolving two peaks with a peak diameter ratio > 2.5 |
| Detection Channels | 116 |
| Detector Array | 132 photodiode detectors |
| Light Source | Solid-state laser (rated lifetime > 70,000 hours) |
| Optical Design | Dual-lens patented configuration with multi-wavelength and polarized light capability |
| Sample Introduction | Dry dispersion and wet suspension modes supported |
| Compliance | Designed to support ISO 13320, ASTM E2412, and USP <429> requirements for particle size distribution analysis |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | MET ONE 3400+ |
| Instrument Type | Optical Particle Counter |
| Flow Rates | 28.3 L/min, 50 L/min, 100 L/min |
| Standard Sizing Channels | 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 µm (model-dependent) |
| Laser Source | Long-life laser diode (MTBF ≥ 10 years) |
| Power | AC input 80–264 VAC |
| Dimensions | 26.7 × 26 × 21 cm (10.5" × 10.25" × 8.25") |
| Weight | 5.6 kg (no battery), 6.9 kg (with 2 cells) |
| Enclosure | 316 stainless steel |
| Operating Environment | 0–40°C, 10–90% RH (non-condensing) |
| Compliance | FDA 21 CFR Part 11 ready, ISO 21501-4, ISO 14644-1, EU GMP Annex 1 compatible |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MET ONE 6000 |
| Instrument Type | Optical Airborne Particle Counter |
| Particle Size Channels | Standard 2-channel (0.3 µm & 0.5 µm), optional 4-channel configuration |
| Light Source | Long-life laser diode |
| Dimensions | 17.15 × 11.43 × 31.75 cm (W × L × H) |
| Weight | 0.68 kg |
| Housing Material | 304 stainless steel |
| Power Supply | 9–28 VDC |
| Max. Power Consumption | 3.3 W (serial/pulse), 4.3 W (Ethernet) |
| Operating Temperature | 10–32 °C |
| Operating Humidity | 5–95% RH, non-condensing |
| Storage Temperature | −40–70 °C |
| Storage Humidity | 5–98% RH, non-condensing |
| Flow Control | Precision orifice-based |
| Flow Rate Options | 0.1 CFM (2.83 L/min) or 1.0 CFM (28.3 L/min) |
| Counting Efficiency | ≥50% at 0.3 µm |
| Coincidence Loss | ≤5% at 2×10⁶ particles/ft³ (7.06×10⁷ particles/m³) for 6002/6003 variants |
| False Count Rate | ≤1 particle per 5 minutes |
| Communication Interfaces | Pulse output, 4–20 mA analog, RS-232, RS-485 (Modbus RTU or FXB), Ethernet TCP/IP |
| Diagnostic Indicators | Multi-color LED status indicator (normal operation, count alarm, sensor fault, flow fault, comms fault) |
| Optional Sensors | Integrated temperature and relative humidity (RH/T) probe |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MET ONE 6000P |
| Instrument Type | Optical Airborne Particle Counter |
| Flow Rate Options | 0.1 cfm or 1.0 cfm |
| Sizing Thresholds | 0.3 µm and 0.5 µm |
| Channel Configurations | Standard 2-channel or optional 4-channel |
| Light Source | Long-life laser diode |
| Housing Material | Stainless steel |
| Dimensions | 17.15 × 11.43 × 31.75 cm (W × D × H) |
| Weight | 4.62 kg (10.2 lb) |
| Power Supply | 24 VDC ±10% or 100–230 VAC, 50/60 Hz |
| Max. Power Consumption | 50 W (DC), 7.9 W (AC) |
| Operating Temperature | 10–32 °C |
| Operating Humidity | 5–95% RH, non-condensing |
| Storage Temperature | −40–70 °C |
| Storage Humidity | 5–98% RH, non-condensing |
| Counting Efficiency Loss | ≤5% at 2×10⁶ particles/ft³ (7.1×10⁷ particles/m³) and at 4×10⁵ particles/ft³ (1.4×10⁷ particles/m³) |
| False Count Rate | ≤1 particle per 5 minutes |
| Flow Control | Microprocessor-based with differential pressure sensor |
| Pump Type | Integrated vacuum pump |
| Compliance | ISO 21501-4:2018, ISO 14644-1:2015, FDA 21 CFR Part 11 (data integrity support), EU GMP Annex 1 (2022) alignment |
| Output Interfaces | 4–20 mA analog, Ethernet TCP/IP, Modbus RTU (RS-485), pulse output, optional wireless modules |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | Imported |
| Model | MET ONE 7000 |
| Instrument Type | Optical Airborne Particle Counter |
| Flow Rate Options | 0.1 CFM or 1.0 CFM |
| Particle Size Sensitivity | 0.5 µm |
| Channel Configurations | 2-channel or 4-channel selectable |
| Light Source | Long-life laser diode |
| Housing Material | Electropolished stainless steel, VHP-resistant optics |
| Compliance | ISO 21501-4, ISO 14644-1/2, IEST-RP-CC021.1, FDA 21 CFR Part 11 (with optional audit trail software), GMP-environment validated design |
| Operating Temperature | 10–32 °C |
| Relative Humidity | 5–95% RH (non-condensing) |
| Power Supply | 24 VDC ±10% or 100–230 VAC, 50/60 Hz |
| Max Power Consumption | 6.9 W (Ethernet DC), 12.5 W (Wireless AC) |
| Vacuum Requirement | ≥40.6 cm Hg |
| Flow Control | Precision orifice-based |
| Counting Loss | ≤5% at 2×10⁶ particles/ft³ (7005 variant) or 4×10⁵ particles/ft³ (7015 variant) |
| False Count Rate | ≤1 particle per 5 minutes |
| Communication Interfaces | Ethernet TCP/IP, RS-485 Modbus RTU/FXB, 4–20 mA analog output, wireless (optional) |
| Enclosure Rating | NEMA 4X |
| Weight | 3.73 kg (AC), 3.67 kg (DC) |
| Dimensions | 22.9 W × 12.5 D × 16.0 H cm |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer | Beckman Coulter, Inc. |
| Product Type | Imported |
| Model | MET ONE HHPC 2+ |
| Instrument Category | Optical Particle Counter |
| Particle Size Range | 0.5–5.0 µm |
| Channels | 2 |
| Flow Rate | 2.83 L/min |
| Counting Efficiency | 50% at 0.5 µm, 100% ≥0.75 µm (per ISO 21501-4) |
| Zero Count Level | ≤1 count / 5 min (per JIS B9921) |
| Maximum Concentration Limit | 4,000,000 particles/ft³ (10% coincidence loss, per ISO 21501-4) |
| Data Storage Capacity | 10,000 records |
| Display | 3.5″ color TFT, 320 × 240 pixels |
| Operating Temperature | 10–40 °C, ≤95% RH (non-condensing) |
| Battery Life | >10 h typical, ≥5.5 h continuous |
| Dimensions | 10.7″ × 3.9″ × 2.1″ |
| Weight | 1.5 lbs (0.68 kg) |
| Enclosure Material | Polycarbonate-ABS blend |
| Compliance | ISO 14644-1, ISO 21501-4, JIS B9921, FS 209E |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer | Beckman Coulter, Inc. |
| Product Type | Imported |
| Model | MET ONE HHPC 6+ |
| Instrument Category | Optical Particle Counter |
| Particle Size Range | 0.3–10 µm (6 channels per ISO 14644-1 & ISO 21501) |
| Flow Rate | 2.83 L/min |
| Weight | 1.5 lbs (0.68 kg) |
| Display | 3.5" color LCD (320 × 240) |
| Data Storage | 10,000 records |
| Counting Efficiency | 50% at 0.3 µm |
| Zero Count Level | ≤1 count/5 min (JIS B9921) |
| Maximum Concentration Limit | 4,000,000 particles/ft³ with <10% coincidence loss (ISO 21501) |
| Operating Environment | 10–40 °C, ≤95% RH (non-condensing) |
| Battery Life | ≥10 h typical, ≥5.5 h minimum continuous |
| Charging Time | 3.5 h |
| Housing Material | Polycarbonate-ABS blend |
| Dimensions | 10.7" × 3.9" × 2.1" (272 × 99 × 53 mm) |
| Connectivity | USB 2.0, Ethernet (HTTP-based web interface), USB flash drive support |
| User Interface Languages | English, Japanese |
| Alarm Configuration | User-defined particle count thresholds |
| Security | Optional administrator password protection |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | MET ONE R4800/R4900 |
| Instrument Type | Optical Particle Counter |
| Minimum Detectable Size | 0.3 µm (R4803/R4903) or 0.5 µm (R4805/R4815/R4905/R4915) |
| Flow Rate | 0.1 CFM (2.83 L/min) or 1.0 CFM (28.3 L/min) |
| Detection Principle | Laser Diode-Based Light Scattering |
| Channel Configuration | Dual-channel (e.g., 0.3/0.5 µm or 0.5/5.0 µm) |
| Counting Efficiency Loss | <5% at 2×10⁶ particles/ft³ |
| Operating Temperature | 12–41°C |
| Relative Humidity | 20–95% RH (non-condensing) |
| Power Interface | Open-collector FET output (max. 150 mA sink, 30 VDC off-state) |
| Communication | RS-485 (R4800 series) or 4–20 mA analog (R4900 series) |
| Housing Material | Stainless steel |
| Weight | 0.3 kg |
| Brand | Beckman Coulter |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Multisizer 4e |
| Instrument Type | Electrical Sensing Zone (ESZ) Particle Analyzer |
| Measurement Principle | Coulter Principle (Electrical Sensing Zone) |
| Size Range | 0.4 µm – 1600 µm (diameter) |
| Volume Range | 0.033 fL – 2.145 × 10⁹ fL |
| Resolution | Up to 400 user-selectable channels |
| Compliance | ASTM D6913, ISO 13319, USP <788>, FDA 21 CFR Part 11, GLP/GMP-ready |
| [Brand | Beidou Instruments / HOKUTOcn |
|---|---|
| Origin | Dongguan, Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Benchtop Optical Contact Angle Meter |
| Measurement Principle | Digital Image Analysis (Sessile Drop, Pendant Drop, Tilting Plate) |
| Contact Angle Range | 0° < θ < 180° |
| Contact Angle Accuracy | ±0.1° |
| Angular Resolution | 0.001° |
| Surface/Interfacial Tension Range | 0.1–2000 mN/m |
| Surface/Interfacial Tension Accuracy | ±0.01 mN/m |
| Sample Stage Dimensions | 130 × 150 mm (customizable) |
| Max Sample Size | 200 mm (W) × ∞ (L) × 30 mm (H) |
| Imaging System | Sony 1/1.8″ Progressive Scan CMOS, 1280 × 1024 @ 80 fps, Rolling Shutter |
| Lens | 0.7×–4.5× Telecentric Contour Lens with ±2.5 mm Focus Adjustment |
| Light Source | Imported Industrial White Cold LED (400–760 nm), PWM + Software Brightness Control, >50,000 h Lifetime |
| Droplet Dispensing | Motorized Syringe Pump, 0.01–25 µL/s, 0.01 µL Precision, Programmable Multi-Point Sequencing |
| Software | CA V2.0 Static & Dynamic Contact Angle + Surface Energy Analysis Suite (Windows 10 64-bit)] |
| Brand | Beidou Instruments (HOKUTOcn) |
|---|---|
| Origin | Dongguan, Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Category | Domestic |
| Model | CA100S |
| Price | USD 5,000 (approx.) |
| Instrument Type | Video-Based Optical Contact Angle Meter |
| Form Factor | Benchtop Laboratory System |
| Contact Angle Range | 0° < θ < 180° |
| Measurement Accuracy | ±0.1° |
| Angular Resolution | 0.001° |
| Standard Sample Stage | 130 × 150 mm (customizable) |
| Max Sample Dimensions | 200 (W) × ∞ (L) × 30 (H) mm |
| Imaging Sensor | 1/1.8″ Progressive Scan CMOS (1280 × 1024) |
| Frame Rate | 30 fps |
| Optical Zoom | 0.7×–4.5× |
| Droplet Dispensing Precision | ±0.1 µL |
| Dispensing Speed | 0.01–25 µL/s |
| Light Source | Industrial-grade white LED (400–760 nm), PWM-dimmable, >20,000 h lifetime |
| Power Supply | 220 V AC, 50–60 Hz |
| Power Consumption | 10 W |
| Dimensions (W × L × H) | 655 × 180 × 500 mm |
| Weight | 14 kg |
| [Brand | Beifen Sanpu |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Rotational Viscometer |
| Viscosity Range | 10–2×10⁶ mPa·s |
| Rotors | #1–#4 (standard), #0 optional |
| Speed Settings | 0.3, 0.6, 1.5, 3, 6, 12, 30, 60 rpm |
| Accuracy | ±2% for Newtonian fluids |
| Power Supply | AC 220 V ±10%, 50 Hz ±10% |
| Operating Temperature | 5–35 °C, RH ≤80% |
| Dimensions | 370 × 325 × 280 mm |
| Weight | 6.8 kg] |
| Brand | Beiguang Jingyi / All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy Options | 7.5 J, 15 J, 25 J, 50 J (custom higher energy available) |
| Impact Velocity | 3.8 m/s |
| Pendulum Center Distance (Support Span) | 395 mm |
| Pendulum Pre-lift Angle | 150° |
| Blade Radius | 0.8 ± 0.2 mm |
| Blade Angle | 75° |
| Blade Front Angle | 5° |
| Blade Back Angle | 10° |
| Test Specimen Support Span Options | 60 mm, 70 mm, 62 mm, 95 mm (configurable per standard) |
| Display | LCD Digital Readout with Photoelectric Encoder (2500-line resolution, ±0.018° angular accuracy) |
| Energy Calculation Method | Potential Energy Loss (E = Pd·(cosβ − cosα)) with Air Friction & Bearing Loss Correction |
| Power Supply | 220 V AC ±10%, 50 Hz, 0.2 A |
| Operating Temperature | 15–35 °C |
| Dimensions (W×D×H) | 930 × 520 × 950 mm |
| Net Weight | 80 kg |
| Compliance | GB/T 1043-1993, ISO 179-1:2010, GB/T 2611-2007, JB/T 8762-1998 |
| Key | Brand: Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | CS-01 / CS-02 / HQ-04 |
| Operating Voltage | 18–30 VDC |
| Working Temperature | −55 °C to +150 °C |
| Storage Temperature | −55 °C to +70 °C |
| Max Working Pressure | ≤0.6 MPa |
| Sealing Performance | ≥0.3 MPa |
| Magnetic Pole Gap | 2.0 ± 0.1 mm (CS-01/CS-02), 1.7 ± 0.1 mm (HQ-04) |
| Magnetic Attraction Force | ≥50 g (CS-01/CS-02), ≥100 g (HQ-04) |
| Filtration Rating | 900 µm (CS-01), None (CS-02), 600 µm (HQ-04) |
| Ground Resistance | ≤20 mΩ |
| Insulation Resistance | ≥20 MΩ |
| Compatible Fluids | MIL-PRF-23699 (GJB 1263–1991 compliant) synthetic aircraft lubricants (e.g., 4106, 4050) |
| Humidity Limit | ≤90% RH |
| Max Operational Altitude | 20,000 m |
| TBO | 1000 engine operating hours |
| Service Life | 4000 engine operating hours |
| Installation Interface | φ18 flange (CS-01), M12×1.5 (CS-02), φ27 flange (HQ-04) |
| Dimensions | ≤φ41×72 mm (CS-01), ≤φ31×77 mm (CS-02), ≤φ54×82 mm (HQ-04) |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | DC |
| Instrument Type | Optical Particle Counter |
| Channel Diameter Options | 5 mm / 8 mm / 12 mm / 14 mm / 19 mm / 38 mm |
| Ferrous Particle Detection Ranges | 30–200 µm (micro), 200–300 µm (medium), >300 µm (large) |
| Non-Ferrous Particle Detection Ranges | 150–400 µm (micro), >400 µm (large) |
| Flow Rate Range | 1–10 L/min (DC-5) to 68–680 L/min (DC-38) |
| Operating Temperature | −40 °C to +75 °C (standard) |
| Max Oil Temperature | ≤85 °C (standard) |
| Max System Pressure | <2 MPa (standard) |
| Humidity | <95% RH |
| Power Supply | 18–36 V DC |
| Communication Protocols | CAN 2.0, RS-485, RS-422 |
| Communication Isolation Voltage | 2500 V DC |
| Electrical Isolation Voltage | 1500 V DC |
| Bus Node Capacity | 32 nodes |
| Standby Current | <0.25 A |
| Inrush Current | <1 A |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Instrument Type | Optical Particle Counter (Light Obscuration Principle) |
| Model | KLD-T |
| Sample Compatibility | Hydraulic oil, lubricating oil, transformer oil (insulating oil), turbine oil (steam turbine oil), gear oil, engine oil, aviation kerosene, organic solvents, polymer solutions |
| Detection Principle | Light obscuration (optical blockage) with custom-designed flow cell and precision optical assembly |
| Sampling Method | Dual-mode pressure control (positive/negative pressure chamber for degassing and high-viscosity fluid handling) |
| User Interface | Built-in bilingual toggle (Chinese/English) |
| Data Storage | Onboard memory for traceable measurement records |
| Connectivity | RS-232 serial interface and Bluetooth 4.0 for host PC communication |
| Calibration & Standards | User-configurable particle size channels |
| Regulatory Context | Designed to support GLP-compliant workflows |
| Brand | North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | BEST-121 |
| Price | USD 2,800 (approx.) |
| Brand | All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Model | HMYS-200 |
| Temperature Range | RT–200 °C |
| Chamber Volume (W×D×H) | 350×300×300 mm |
| External Dimensions | 600×420×450 mm |
| Temperature Uniformity | ±1% of full scale |
| Timer Range | 1–9999 min |
| Compression Ratios | 50%, 75%, 90% |
| Test Duration | 22 h |
| Specimen Size | 50×50×25 mm (5 pcs) |
| Glass Plate Thickness | 1.0–1.5 mm |
| Rated Voltage | 220 V AC |
| Brand | Beijing North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | BEST-911 |
| Price | USD 3,500 (FOB Beijing) |
| Measurement Range | 10⁻⁹ Ω·m to 10¹¹ Ω·m |
| Accuracy | ±1% to ±5% |
| Electrometer Input Resistance | ≥10¹⁴ Ω |
| Electrometer Voltage Range | ±100 mV to ±200 V |
| Picoammeter Sensitivity | 1 fA (1×10⁻¹⁵ A) |
| Adjustable DC Voltage Source Accuracy | ±1% |
| Electrode Configuration | Standard Four-Electrode Fixture Included |
| Current Electrode Spacing | 100 mm |
| Potential Electrode Spacing | 20 mm |
| Insulating Base Resistivity | ≥10¹⁴ Ω·m |
| Applied Test Pressure | 3.25 N |
| Net Weight | 331 g |
| Key | Brand: Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 3H-2000PB2 |
| Pricing | Available Upon Request |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 3H-2000PS1X |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Measurement Principle | Static Volumetric Method (Static Capacity Method) |
| Number of Analysis Stations | 1–8 configurable |
| Specific Surface Area Range | 0.0005 m²/g to unlimited |
| Pressure Range | 10⁻² Pa |
| Repeatability | ≤ ±0.01 (relative standard deviation) |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 3H-2000PWP |
| Instrument Type | Static/Dynamic Vapor Adsorption Analyzer |
| Measurement Principle | Knudsen Effusion Mass Loss Method |
| Analysis Stations | 2 sample + 2 reference stations (4 total) |
| Sample Mass Range | 10–1000 mg |
| Mass Resolution | 1 µg |
| Vacuum System | Dual-stage mechanical pump (1×10⁻² Pa) + turbomolecular pump (1×10⁻⁶ Pa) |
| Pressure Range | 0–1 torr & 0–1000 torr (dual-range, segmented) |
| Temperature Range | –180 °C to 900 °C (accuracy ±0.1 °C, stability <0.1 °C) |
| Isothermal Control Range | Ambient to 60 °C (accuracy ±0.2 °C, stability <0.1 °C) |
| Temperature Program | 32-segment ramping with overheat protection |
| Sealing | Oil-resistant & corrosion-resistant valve and tubing system |
| Dimensions | H110 × W100 × L70 cm |
| Weight | 200 kg |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 3H-2000PWP2 |
| Price Range | USD 70,000–140,000 |
| Instrument Type | Static/Dynamic Vapor Adsorption Analyzer |
| Measurement Principle | Knudsen Effusion Mass Loss Method |
| Analysis Stations | 2 sample + 2 reference stations (total 4) |
| Sample Mass Range | 10–1000 mg |
| Mass Resolution | 1 µg |
| Vacuum System | Dual-stage mechanical pump (base pressure ≤ 1×10⁻² Pa) + turbo-molecular pump (base pressure ≤ 1×10⁻⁶ Pa) |
| Pressure Range | 0–1 torr & 0–1000 torr (dual-range, segmented measurement) |
| Temperature Range | –180 °C to 900 °C (accuracy ±0.1 °C, stability < 0.1 °C) |
| Isothermal Control Range | Ambient to 60 °C (accuracy ±0.2 °C, stability < 0.1 °C) |
| Temperature Programming | 32-segment ramping with overtemperature protection |
| Sealing Design | Oil-resistant, corrosion-resistant valves and tubing |
| Dimensions | H 110 cm × W 100 cm × L 70 cm |
| Weight | 200 kg |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | BSD-660 |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Measurement Principle | Static Volumetric Method |
| Number of Analysis Stations | 3 / 6 / 9 / 12 configurable |
| Pore Size Range | 0.35–500 nm |
| Analytical Theories Supported | BET surface area, BJH pore size distribution (mesopores), DR & HK (Original) micropore analysis, DFT-based pore modeling, IASTL multi-component adsorption modeling |
| Repeatability | ≤0.5% RSD (certified standard reference materials) |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | BSD-660 Series |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Measurement Principle | Static Volumetric Method |
| Number of Analysis Stations | 3 / 6 / 9 / 12 configurable |
| Surface Area Range | ≥0.0005 m²/g |
| Pore Diameter Range | 0.35–500 nm |
| Pressure Range | 10⁻² Pa (standard) |
| Test Theory | Static Volumetric Adsorption |
| Repeatability | ≤1% RSD |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Specific Surface Area and Pore Size Analyzer |
| Model | BSD-660A3M |
| Analysis Stations | 3 / 6 / 9 / 12 |
| Surface Area Range | ≥0.0005 m²/g |
| Pore Diameter Range | 0.35–500 nm |
| Vacuum Level | ≤1×10⁻² Pa (standard), optional turbomolecular pump for ≤1×10⁻⁸ Pa |
| Measurement Principle | Static Volumetric Gas Adsorption |
| Repeatability | <0.5% RSD for surface area, pore size, pore volume, and adsorbed quantity (certified reference materials) |