Rotary Evaporators
Filter
Showing 151–180 of 229 results
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-5299 |
| Standard Flask Capacity | 250 mL rotating flask (pear-shaped, 24/29 joint) + 500 mL collection flask (round-bottom, 24/29 joint) |
| Rotational Speed Range | 0–130 rpm |
| Temperature Control Range | Ambient to 99 °C (digital PID temperature controller with LED display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.12 m² |
| Drive Type | DC motor with digital speed regulation |
| Lift Mechanism | Motorized vertical lift (electromechanical) |
| Condenser Configuration | Vertical top-entry condenser with dual-layer cooling jacket |
| Brand | LabTech |
|---|---|
| Model | EV311 |
| Rotation Speed Range | 20–240 rpm |
| Heating Bath Temperature Range | Ambient to 100 °C |
| Heating Bath Capacity | 5 L |
| Evaporation Capacity | 50–3000 mL |
| Condenser Surface Area | 1200 cm² |
| Evaporation Rate (H₂O) | 20 mL/min |
| Control Method | PID with LED Display |
| Temperature Accuracy | ±1 °C (water) |
| Heating Power | 1300 W |
| Bath Material | 304 Stainless Steel |
| Automatic Lift Mechanism (Stroke | 160 mm) |
| Head Tilt Angle | 0–60° |
| IP Rating | IP20 |
| Safety Features | Dry-run auto-shutoff, anti-backflow condensate protection, over-temperature audible alarm (optional on higher models) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | EV400 |
| Capacity | Contact manufacturer |
| Ultimate Vacuum | Contact manufacturer |
| Rotational Speed Range | Contact manufacturer |
| Bath Temperature Range | Contact manufacturer |
| Temperature Control Accuracy | Contact manufacturer |
| Condenser Cooling Surface Area | Contact manufacturer |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | EV400H |
| Pricing | Available Upon Request |
| Heating Bath Mode | Water or Oil Bath |
| Temperature Display | LCD Digital |
| Safety Features | Dry-run Auto-Off, Overtemperature Audible Alarm |
| Condenser Design | Dual-stage Vertical Condenser |
| Sealing Material | Modified PTFE + FKM Elastomer |
| Lift Mechanism | Manual with Micro-switch Lock/Release |
| Rotation Control | Single-knob Flywheel with LCD RPM Display |
| Optional Accessory | VC1000 Digital Vacuum Controller |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | EV400Touch |
| Capacity | Customizable (Consult Manufacturer) |
| Ultimate Vacuum | <1 mbar (with compatible vacuum pump) |
| Rotation Speed | 20–280 rpm, digitally controlled |
| Bath Temperature Range | Ambient to 180 °C (oil bath), Ambient to 99 °C (water bath) |
| Temperature Control Accuracy | ±0.5 °C |
| Condenser Cooling Surface Area | 1,200 cm² (vertical dual-layer coil with PTFE-coated inner surface) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | EV400VAC |
| Capacity | Customizable per application (contact technical support) |
| Ultimate Vacuum | <1 mbar (with integrated vacuum controller and compatible pump) |
| Rotational Speed Range | 20–280 rpm (digital stepless control) |
| Bath Temperature Range | Ambient to +99.9 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Condenser Cooling Surface Area | 400 cm² (vertical dual-layer borosilicate glass condenser) |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Model | EV400VAC |
| Capacity | Custom-configurable (standard flask sizes: 50–4000 mL) |
| Ultimate Vacuum | ≤5 mbar (with integrated diaphragm vacuum pump) |
| Rotation Speed | 20–280 rpm (digital PID-controlled, ±1 rpm repeatability) |
| Bath Temperature Range | Ambient to 180 °C (oil bath) / Ambient to 99 °C (water bath) |
| Temperature Control Accuracy | ±0.5 °C |
| Condenser Surface Area | 1,200 cm² (vertical dual-layer coiled condenser with PTFE-coated cooling jacket) |
| Brand | LabTech |
|---|---|
| Model | VC1000 |
| Origin | Beijing, China |
| Manufacturer | LabTech (OEM/ODM capable) |
| Vacuum Control Range | 2 mbar to atmospheric pressure (1013 mbar) |
| Control Accuracy | ±1 mbar (±0.1 kPa) |
| Display | 2.5-inch backlit LCD |
| Control Modes | 5-step programmable vacuum gradient |
| Pump Interface | Automatic start/stop relay output (dry contact, 250 VAC/3 A) |
| Tubing Compatibility | Chemically resistant PTFE and FFKM-sealed fluid path |
| Compliance | Designed for integration with rotary evaporators and vacuum distillation systems |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N4R-1.0-50 |
| Price Range | USD 4,200–7,000 (FOB) |
| Water Flow Rate | 100–1000 L/h |
| Controllable Resistivity Range | 0.15–1.7 MΩ·cm |
| Control Accuracy | ±0.03 MΩ·cm |
| Max. Inlet Water Pressure | 0.5 MPa |
| Pressure Drop | 0.06 MPa at 3000 L/h |
| Connection Ports | 3/4″ female screw |
| Power Supply | AC 100–130 V / 220–240 V, 50/60 Hz, single-phase, 1 A |
| Enclosure Type | Rack or Cabinet |
| H₂O₂-Compatible Sterilization | Yes (3% hydrogen peroxide) |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | R-3001 |
| Capacity | 1 L |
| Rotation Speed | 10–280 rpm |
| Temperature Control Range | 5–35 °C |
| Vacuum Pump Compatibility | SHB-III Circulating Water Vacuum Pump (optional, not integrated) |
| Model | RE-3000A |
|---|---|
| Rotational Speed | 20–200 rpm (digital display) |
| Bath Temperature Range | Ambient to 90 °C (PID-controlled, digital readout) |
| Heating Bath | PTFE-coated stainless steel, fully enclosed heater, 1.4 kW |
| Condenser | Vertical dual-flow all-glass reflux condenser with standard taper joints (29/32 or 24/29) |
| Lift Range | 0–150 mm (motorized, automatic) |
| Total Power Consumption | 1.5 kW |
| Input Voltage | 220 V AC, 50 Hz |
| Sealing | Fluoroelastomer (FKM) vacuum gaskets |
| Feed System | Valve-type addition tube with PTFE tubing and splash guard ring |
| Vacuum Compatibility | ≤ 10 mbar typical operating range) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | RE5000 |
| Rotational Speed Range | 0–110 rpm |
| Heating Temperature Range (Water Bath) | Ambient to 98 °C |
| Condenser Type | Vertical dual-coil high-density serpentine condenser with large-diameter tubing |
| Evaporation Flask Capacity | 5 L |
| Collection Flask Capacity (Standard Ground Joint) | 3 L |
| Total Power Consumption | 2120 W |
| Dimensions (W×D×H) | 600 × 400 × 850 mm |
| Lifting Mechanism | Motorized tilt-type lift with tactile paddle switch |
| Speed Display | Digital LED readout |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | RE5220 |
| Price | USD 4,700 (FOB Shanghai) |
| Rotation Speed Range | 20–110 rpm (digital display, frequency-controlled) |
| Heating Bath Temperature Range (water) | RT to 98 °C |
| Condenser Type | Vertical large-bore dual-coil serpentine condenser |
| Rotating Flask Capacity | 20 L |
| Collection Flask Capacity (standard ground-glass joint) | 10 L |
| Total Power Consumption | 5,180 W |
| Dimensions (W×D×H) | 1100 × 650 × 1900 mm |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Model | RE52AA |
| Capacity | 2 L |
| Ultimate Vacuum | 3 mmHg |
| Rotation Speed | 0–150 rpm |
| Temperature Control Range | 0–100 °C |
| Heating Bath Accuracy | ±1 °C (typical for digital PID-controlled stainless steel bath) |
| Condenser Surface Area | ≥0.12 m² (vertical dual-layer coil with high-efficiency coolant path) |
| Power Input | 1000 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Construction | Electropolished 304 stainless steel frame, PTFE-coated heating bath, borosilicate glassware (24/29 standard taper) |
| Brand | Shanghai Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | R-3001 |
| Capacity | 1 L |
| Rotation Speed | 10–280 rpm |
| Condensing Area | 0.126 m² |
| Lifting Stroke | 150 mm |
| Sealing System | PTFE + Fluoroelastomer Dual-Seal |
| Condenser Type | Dual-Reflex Cold Finger |
| Evaporation Rate (Water) | 23 mL/min |
| Evaporation Rate (Ethanol) | 25 mL/min |
| Motor Power | 40 W |
| Display | LCD Digital |
| Vacuum Rise Rate | ≤ 0.33 kPa/min |
| Protection Features | Overcurrent, Ground Fault, Short-Circuit |
| Operating Temperature | 5–35 °C |
| Relative Humidity | ≤ 70 % RH |
| Power Supply | 110 V~, 60 Hz or 220–240 V~, 50/60 Hz |
| Dimensions (W×D×H) | 620 × 400 × 700/850 mm |
| Weight | 10 kg |
| Certification | CE (TUV certified) |
| Brand | Shanghai Yarong |
|---|---|
| Model | RE-2000A |
| Evaporation Flask Capacity | 50–2000 mL |
| Rotational Speed Range | 0–200 rpm |
| Temperature Control Range | Ambient to 99 °C (PID-controlled, LED digital display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.15 m² |
| Condenser Type | Standardized 24/40 spherical joint with extended glass shaft (24 standard taper) |
| Sealing Mechanism | M42 quick-lock nut |
| Display | Dual-screen — main control panel + independent water bath temperature display |
| Interface | Touch-sensitive color LCD with time setting, real-time speed/temperature readout |
| Brand | Shanghai Yarong |
|---|---|
| Capacity | 50–2000 mL flask compatibility |
| Vacuum Range | –0.01 to –0.095 MPa (built-in vacuum controller, ±0.2–0.5% accuracy) |
| Rotation Speed | 0–200 rpm, reversible direction |
| Temperature Control | PID-controlled water bath, 20–99 °C (±1 °C accuracy) |
| Display | Dual-color LCD touchscreen with real-time digital readouts for temperature, speed, and timer |
| Condenser | Dual-flow vertical condenser, 0.15 m² cooling surface |
| Glassware Interface | Standard 24/40 taper joints, extended glass shaft, M42 locking nut |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-2000B |
| Evaporation Flask Capacity | 50–2000 mL |
| Rotation Speed | 0–200 rpm |
| Temperature Control Range | Room temperature to 99 °C (PID digital temperature control with LED display) |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.15 m² |
| Brand | Shanghai Yarong |
|---|---|
| Model | RE-3000A |
| Evaporation Flask Capacity | 50–3000 mL |
| Ultimate Vacuum Range | −0.01 to −0.095 MPa (built-in vacuum controller, ±0.2–0.5% reading accuracy) |
| Rotation Speed | 0–200 rpm |
| Bath Temperature Control Range | Ambient to 99 °C (PID-controlled, LED digital display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.15 m² |
| Condenser Type | Standardized 24/40 ball-joint condenser with extended glass shaft (M42 locking nut) |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-3000B |
| Evaporation Flask Capacity | 50–3000 mL |
| Rotation Speed Range | 0–200 rpm |
| Temperature Control Range | Ambient to 99 °C (PID-controlled, digital display) |
| Temperature Control Accuracy | ±1 °C |
| Condenser Type | Dual-flow vertical condenser |
| Condensing Surface Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RE-3000C |
| Evaporation Flask Capacity | 50–3000 mL |
| Rotation Speed | 0–200 rpm |
| Temperature Control Range | Room temperature to 99 °C (PID digital temperature controller with LED display) |
| Temperature Control Accuracy | ±1 °C |
| Condenser Surface Area | 0.15 m² (standard-taper jacketed condenser with direct-coupled receiving flask) |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RE-5205A |
| Capacity | 5 L |
| Rotation Speed | 0–120 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.4 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | RE-5210A |
| Capacity | 10 L |
| Ultimate Vacuum Range | −0.01 to −0.095 MPa (accuracy: ±0.2–0.5%) |
| Rotation Speed | 0–138 rpm |
| Temperature Control Range | Ambient to 99 °C (PID-controlled, digital display) |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Area | 1.1 m² |
| Condenser Type | Vertical, extra-long, high-efficiency double-reflux |
| Drive | Frequency-controlled motor |
| Features | Digital speed & temperature display, continuous feed/discharge, automatic water bath lift |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-5210AA |
| Capacity | 10 L |
| Ultimate Vacuum Range | −0.01 to −0.095 MPa (±0.2–0.5% accuracy) |
| Rotation Speed | 0–138 rpm |
| Temperature Control Range | Ambient to 99 °C (PID-controlled, LED digital display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Area | 1.1 m² |
| Condenser Type | Vertical, extra-long dual-reflux coil |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-5220 |
| Capacity | 20 L |
| Ultimate Vacuum Range | –0.01 to –0.095 MPa (accuracy ±0.2–0.5%) |
| Rotation Speed | 0–120 rpm |
| Temperature Control Range | Ambient to 99 °C (PID digital control with LED display) |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Area | 2.2 m² |
| Brand | Shanghai Yarong |
|---|---|
| Capacity | 20 L |
| Ultimate Vacuum Range | –0.01 to –0.095 MPa (accuracy: ±0.2–0.5% of setpoint) |
| Rotational Speed | 0–120 rpm (bidirectional, programmable rotation direction and dwell time) |
| Bath Temperature Control | PID-regulated, digital display, ambient to 99 °C (accuracy: ±1 °C) |
| Cooling Surface Area | 2.2 m² |
| Integrated Vacuum Controller | Built-in, pressure-setpoint programmable with real-time digital feedback |
| Drive System | Frequency-converter controlled motor |
| Features | LCD color touchscreen interface, automatic bath lift, continuous feed & discharge ports, timer-based operation scheduling |
| Brand | Shanghai Yarong |
|---|---|
| Model | RE-5286A |
| Capacity | 50–2000 mL |
| Rotational Speed | 0–130 rpm (electronic speed control) |
| Heating Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Area | 0.12 m² |
| Cold Finger Type | Top-entry vertical condenser with digital temperature display |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RE-5298A |
| Capacity | 3 L |
| Rotation Speed | Electronically Controlled, 0–150 rpm with Digital RPM Display |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Type | Dual-Return Vertical Standard-Joint Condenser |
| Condensing Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | RE-52A |
| Capacity Range | 50–2000 mL |
| Rotational Speed | 0–150 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condensing Surface Area | 0.08 m² (coiled cold finger condenser) + dry ice cooling interface |
| Display | Digital temperature display |
| Drive | Electronic speed control |
| Lift Mechanism | Motorized vertical lift |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | RE-52AA |
| Capacity Range | 50–2000 mL |
| Rotational Speed | 0–150 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.12 m² |