- All
- Favorite
- Popular
- Most rated
| Brand | SOLY |
|---|---|
| Origin | Italy |
| Type | Shore Hardness Tester (Shore D) |
| Construction | C-frame with weighted diamond-tipped impact hammer |
| Drop height | 19 mm |
| Dimensions (H × W × D) | 360 mm × 150 mm × 162 mm |
| Vertical clearance | 70 mm |
| Base footprint | 60 mm × 150 mm |
| Weight | 16 kg |
| Standard accessories | Soft/hard calibration shims (1 each), V-groove anvil, interface gauge, weight extractor, hardness conversion chart (ISO 868 / ASTM D2240 compliant), carrying case, vinyl protective cover |
| Brand | SOLY |
|---|---|
| Origin | Italy |
| Model | NBH3 |
| Instrument Type | Brinell Hardness Tester |
| Operating Principle | Hydraulic Load Application |
| Vertical Clearance | 200 mm |
| Height | 1100 mm |
| Depth (Front-to-Back) | 155 mm |
| Footprint | 430 × 510 mm |
| Weight | 175 kg |
| Standard Accessories | Brinell measuring microscope, 5 mm & 10 mm indentor holders, Brinell hardness conversion chart, Flat anvil, V-anvil, Storage case with vinyl cover |
| Brand | SOLY |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 3R |
| Instrument Type | Rockwell Hardness Tester |
| Vertical Travel | 200 mm |
| Flat Anvil Area | 135 mm |
| Height | 640 mm |
| Footprint | 480 × 220 mm |
| Weight | 65 kg |
| Indenters | Diamond Cone (HRC scale), 1/16″ Steel Ball (HRB scale) |
| Hardness Test Blocks | 2 × C-scale, 1 × B-scale |
| Anvils | Flat Anvil (Ø65 mm), V-Anvil (Ø47 mm & Ø127 mm) |
| Accessories | Elevating Screw Cover Set, Rockwell Hardness Conversion Chart, Power Cord, Accessory Storage Case |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SP0500 (230 V) / SP0501 (115 V) |
| Instrument Type | Pendulum Damping Hardness Tester |
| Compliance | ISO 1522:2005, NBN T22-105, BS 3900-E5 |
| Pendulum Options | SP0505 (Konig), SP0510 (Persoz) |
| Base Plate | VF2063 tempered glass (6 mm thick) |
| Dimensions (closed) | 740 × 430 × 430 mm |
| Dimensions (open) | 960 × 430 × 650 mm |
| Weight | 26 kg |
| Construction | Stainless steel front panel & components |
| Pendulum Pivot Balls | 2 × tungsten carbide, Ø8 mm (Konig), 2 × tungsten carbide, Ø5 mm (Persoz) |
| Pivot Spacing | 50 mm (Konig), 30 mm (Persoz) |
| Oscillation Period | 1.0 s (Konig), 1.4 s (Persoz) |
| Adjustable Mass | 500 g / 200 g stainless steel pendulum weights |
| Brand | SOLY |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 3NR |
| Instrument Type | Rockwell Hardness Tester |
| Vertical Travel | 200 mm |
| Flat Anvil Diameter | 65 mm |
| V-Anvil Dimensions | Ø47 mm × 127 mm |
| Maximum Specimen Height | 640 mm |
| Base Footprint | 490 × 280 mm |
| Net Weight | 74 kg |
| Indenters Supplied | Diamond Cone (HRC scale), 1/16″ Steel Ball (HRB scale) |
| Hardness Adjustment Discs | Two for HRC, One for HRB |
| Accessories | Adjustable Dial Ring, Crank Handle with Optimized Lever Ratio, Dust-Proof Enclosure, Calibration Certificate, Hardness Conversion Chart, Power Cord, Accessory Storage Case |
| Brand | SOLY |
|---|---|
| Origin | Italy |
| Model | PD-1 |
| Hardness Scale | Shore D |
| Instrument Type | Shore Hardness Tester |
| Height | 245 mm |
| Dial Diameter | 55 mm |
| Measuring Cylinder Diameter | 28 mm |
| Weight | 770 g |
| Compliance | ASTM D2240, ISO 868 |
Show next