Spray Dryers
Filter
Showing 121–150 of 151 results
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | ADL311 |
| Solvent Compatibility | Aqueous Only |
| Max. Evaporation Rate | 1300 mL/h |
| Inlet Temperature Range | 40–220 °C (±1 °C control accuracy) |
| Outlet Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa (standard operation at 0.3 MPa) |
| Heating Power | 2.0–2.88 kW (200–240 V AC) |
| Dimensions (W×D×H) | 580 × 420 × 1150 mm |
| Weight | 80 kg |
| Electrical Supply | AC 200–240 V, 50/60 Hz, 16–18 A |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | ADL311S |
| Solvent Compatibility | Water-soluble & organic solvents (with optional GAS410 solvent recovery unit) |
| Max. Evaporation Rate | 1300 mL/h |
| Inlet Temperature Range | 40–220 °C (±1 °C accuracy) |
| Outlet Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa (operating at 0.3 MPa) |
| Heating Power | 2.0–2.88 kW (200–240 V AC) |
| Dimensions (W×D×H) | 580 × 420 × 1150 mm |
| Weight | 80 kg |
| Power Supply | AC 200–240 V, 50/60 Hz, 16–18 A |
| Safety Features | Overheat protection (inlet/outlet), pump reverse detection, earth-leakage circuit breaker, nozzle connection monitoring (when paired with GAS410) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | ADL311S-A |
| Sample Types | Aqueous, Organic, and Mixed Solvent Systems |
| Max. Feed Rate | 3 mL/h |
| Inlet Temperature Range | 40–220 °C |
| Outlet Temperature Range | 0–60 °C |
| Particle Size Output | ~100 µm (typical, dependent on feed properties) |
| Evaporation Capacity | Up to 1300 mL/h |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Heating Power | 2.0–2.88 kW (voltage-dependent) |
| Dimensions (W×D×H) | 580 × 420 × 1150 mm |
| Weight | 80 kg |
| Compliance | CE-marked |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | ADL312SC-A |
| Sample Types | Aqueous & Organic Solvent Solutions/Suspensions |
| Max. Feed Rate | 1500 mL/h |
| Inlet Temperature Range | 40–240 °C |
| Outlet Temperature Range | 0–100 °C |
| Inlet Temp. Control Accuracy | ±1 °C |
| Drying Air Flow | 0–1.0 m³/min |
| Atomizing Air Flow | 0–30 L/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Heater Power | 3.2 kW |
| Dimensions (W×D×H) | 580 × 420 × 1150 mm |
| Weight | 80 kg |
| Power Supply | AC 200–230 V, 50/60 Hz, 16–18 A |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Atomization Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Inlet Air Temperature Range | 0–300 °C |
| Outlet Air Temperature Monitoring | K-Type Thermocouple |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Feed Pump | Precision Peristaltic Type, 0–70 mL/min Adjustable |
| Hot Air Flow Control | DC Brushless Blower, 0.3–1.0 m³/min |
| Heating System | Dual Stainless Steel Heaters, 2.0 kW × 2 |
| Nozzle Maintenance | Automated Pulse Cleaning (Probe Tapping + Purge Air) |
| Safety Features | Independent Over-Temperature Cut-Off, Leakage Current Protection, Feed Pump Reverse Rotation Detection, Electrostatic Discharge Brush, Integrated Safety Enclosure |
| Power Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Spray Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Feed Pump | Volumetric Peristaltic Pump (0–70 mL/min) |
| Blower | DC Brushless Motor (0.3–1.0 m³/min) |
| Inlet Temperature Range | 0–300 °C (PID Control, ±1 °C Stability) |
| Heating Power | 2 × 2.0 kW Stainless Steel Heating Elements |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Standard Features | Automatic Nozzle Orifice Cleaning (Timer-Controlled Probe Tapping), Nozzle Air Purge, Motorized Head Elevation, Electrostatic Discharge Brush, Safety Guard, Dual Overtemperature Protection (Inlet/Outlet + Independent Heater Chamber Cut-off), 4–20 mA Analog Outputs for Inlet/Outlet Temperatures |
| Power Supply | AC 220 V, 24 A, 50/60 Hz |
| Net Weight | ~180 kg |
| External Dimensions | W1060 × D880 × H1770 mm |
| Compliance | Designed for GLP-compliant R&D environments |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Price | USD 60,000 |
| Sample Compatibility | Aqueous, Organic, and Mixed Solvent Systems |
| Maximum Feed Rate | 3 L/h |
| Inlet Temperature Range | 40–300 °C |
| Outlet Temperature Control | PID-regulated |
| Particle Size Output | 40–100 µm |
| Evaporation Capacity | Up to 3000 mL/h |
| Atomization | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Airflow Range | 0.3–1.0 m³/min |
| Heating Power | 2 × 2.0 kW Stainless Steel Heaters |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Construction Materials | Ultra-Hard Borosilicate Glass (Chamber, Cyclone, Collection Vessel), Stainless Steel & Silicone Tubing |
| Nozzle Features | Automatic Orifice Cleaning (Timer-Controlled Probe Tapping), Nozzle Tip Purge Air |
| Head Assembly | Motorized Vertical Adjustment for Maintenance |
| Safety Systems | Independent Over-Temperature Cut-Off, Pump Reverse Rotation Detection, Earth Leakage & Overcurrent Protection |
| Electrical Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Standard Accessories | Silicone Feed Tubing (Ø6.4/Ø3.2 mm, 2 m), Intake Hose (ID 7.9 mm, 3 m), Exhaust Hose (ID 50 mm, 3 m) |
| Optional Accessory | Organic Solvent Recovery System (GAS410) |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | DL411C |
| Sample Types | Water-soluble & Organic Solvent-based Solutions |
| Max. Feed Rate | 1500 mL/h (up to 3000 mL/h when coupled with GAS411C solvent recovery unit) |
| Inlet Air Temperature Range | 40–300 °C |
| Outlet Temperature Control Range | 40–240 °C |
| Particle Size Output | 40–100 µm |
| Drying Chamber Dimensions | Ø457 × H975 mm (borosilicate glass) |
| Touchscreen Interface | 7-inch, Multilingual (EN/JP/CN) |
| Safety Features | Overheat Protection, Reverse Pump Detection, Leakage Current Protection, Independent Over-Temperature Cut-off |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GAS410 |
| Pricing | Available Upon Request |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GAS410 |
| Solvent Recovery Method | Condenser + Refrigerated Chiller |
| Carrier Gas | Nitrogen (N₂) |
| Circulating Airflow | 0.12–0.65 m³/min |
| Compressor Type | Linear Reciprocating (for atomization) |
| Blower Type | Roots-type Circulation Blower |
| Solvent Collection Vessel | 2 L Round-Bottom Flask |
| Chiller | Air-Cooled, Hermetic, 400 W, R404A Refrigerant |
| Condenser Cooling | Integrated Refrigerated Condensation |
| Filter Type | Cartridge Filter |
| Condenser Temperature Display | Digital Monitor |
| Filter Differential Pressure Gauge | Real-time Clogging Indicator |
| O₂ Concentration Monitor | Fuel-Cell-Based Sensor |
| Safety Interlocks | O₂ Analyzer, Combustible Gas Alarm, Overcurrent & Earth Leakage Protection, Automatic N₂ Purge on Nozzle Disconnection |
| N₂ Supply Requirement | 30 L/h at 0.2 MPa |
| Dimensions (W×D×H) | 710 × 950 × 1450 mm |
| Weight | Approx. 130 kg |
| Power Supply | AC 200–240 V, 5 A, 50/60 Hz |
| Accessories Included | Full Set of Interconnection Fittings, 2 L Collection Flask |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | GAS411C |
| Sample Types | Water-soluble & organic solvents |
| Max. Solvent Recovery Rate | 1500 mL/h |
| Temperature Range | 40–240 °C |
| Condensation Temp. Range | −20 to 30 °C |
| Circulating Airflow | 0.12–0.65 m³/min |
| Oxygen Monitoring Range | 0.01–25% vol |
| Power Supply | AC 200–230 V, 50 Hz, 5–6 A |
| Dimensions (W×D×H) | 710 × 950 × 1450 mm |
| Weight | 130 kg |
| Refrigerant | R404A |
| Compressor Type | Linear reciprocating air compressor |
| Cooling System | Air-cooled, fully sealed refrigeration unit (400 W) |
| Filtration | Class 100 corrosion-resistant HEPA filter |
| Safety Features | O₂ concentration upper-limit alarm, combustible gas alarm, overcurrent protection, automatic N₂ purge activation upon O₂ rise |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210 |
| Inlet Temp Range | 40–220 °C (±1 °C) |
| Outlet Temp Range | 0–60 °C |
| Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow | 0–26 mL/min |
| Power Supply | AC200–240 V, 16–18 A |
| Dimensions | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Compliance | CE-marked, GLP-ready architecture, 21 CFR Part 11–compatible data logging (with optional temperature recorder) |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | GB210 |
| Max Feed Rate | 1300 mL/h |
| Temperature Range | 40–220°C (inlet), 0–60°C (outlet) |
| Particle Size Range | ~1 µm (typical median, dependent on feed formulation) |
| Sample Types | Aqueous & organic solvent-based solutions/suspensions |
| Power Supply | AC200–240V, 50/60 Hz |
| Dimensions | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Compliance | CE-marked, compatible with GLP/GMP environments when configured with audit-trail-capable software and optional accessories |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210-A |
| Input Voltage Range | AC 200–240 V (50/60 Hz) |
| Inlet Air Temperature Range | 40–220 °C (±1 °C PID control) |
| Outlet Air Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow Rate | 0–26 mL/min |
| Power Consumption | 2.0–2.88 kW |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | GB211C-A |
| Sample Types | Aqueous & Organic Solvent Solutions/Suspensions |
| Max. Feed Rate | 1500 mL/h |
| Inlet Temperature Range | 40–240 °C |
| Outlet Temperature Range | 0–100 °C |
| Air Flow Rate | 0–1.0 m³/min |
| Atomizing Air Flow | 0–30 L/min |
| Heating Power | 3.2 kW |
| Control Interface | 7-inch Touchscreen (English/Chinese/Japanese) |
| Data Logging | Optional |
| Remote Operation | Supported |
| Safety Features | Overheat Protection (Inlet/Outlet), Pump Reverse Detection, Leakage Current Protection, Nozzle Connection Monitoring |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Power Supply | AC 200–230 V, 50 Hz, 16–18 A |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | GB211C-B |
| Max. Feed Rate | 1500 mL/h |
| Inlet Temperature Range | 40–240 °C |
| Outlet Temperature Range | 0–100 °C |
| Temperature Control Accuracy | ±1 °C |
| Drying Air Flow | 0–1.0 m³/min |
| Atomizing Air Flow | 0–30 L/min |
| Heating Power | 3.2 kW |
| Dimensions (W×D×H) | 760×420×1350 mm |
| Weight | 110 kg |
| Power Supply | AC 220 V, 18 A, 50/60 Hz |
| Display | 7-inch Touchscreen (Chinese/Japanese/English) |
| Compliance | Designed for GLP-compliant R&D environments |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | GWS410 |
| Maximum Throughput | 1500 mL/h |
| Operating Temperature Range | 40–240 °C |
| Cleaning Liquid | Water or Alkaline Aqueous Solution |
| Scrubber Fill Medium | Pall Rings |
| Circulation Pump | Small Magnetic Drive Pump (Max Flow: 15 L/min, Max Head: 8 m) |
| Reservoir Capacity | 35 L |
| Power Supply | AC 200 V, 0.35 A |
| Dimensions (W×D×H) | 800 × 500 × 1230 mm |
| Weight | Approx. 80 kg |
| Safety Features | Earth Leakage Circuit Breaker |
| Sample Compatibility | Vapor-phase organic solvents and acidic/alkaline process off-gases |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-019 |
| Sample Type Compatibility | Aqueous solutions only |
| Maximum Feed Rate | 5000 mL/h |
| Inlet Air Temperature Range | 105–350 °C |
| Particle Size Output | 1–100 µm |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-019A |
| Sample Compatibility | Aqueous, Organic, and Mixed Solvent Systems |
| Maximum Feed Rate | 5000 mL/h |
| Inlet Air Temperature Range | Up to 280 °C |
| Particle Size Output | 3–100 µm |
| Oxygen Monitoring Threshold | Auto-Shutdown at ≥2.5% O₂ |
| Nozzle Orifice | Standard 2.0 mm (Optional: 0.5 / 0.8 / 1.0 / 1.5 mm) |
| Temperature Control Accuracy | ±2 °C (PID-regulated) |
| Integrated Solvent Recovery | Yes (via Condenser + Heat Exchanger) |
| Optional | Low-Temperature Chiller Integration for Volatile Solvents |
| Brand | Pilotech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-029 |
| Sample Type Compatibility | Aqueous Solutions Only |
| Maximum Feed Rate | 10,000 mL/h |
| Inlet Air Temperature Range | 105–300 °C |
| Particle Size Output Range | 1–120 µm |
| Heating Power | 20 kW |
| Noise Level | <60 dB(A) |
| Control Interface | Bilingual (English/Chinese) Touchscreen LCD |
| Drying Chamber & Collection Components | AISI 304 Stainless Steel |
| Temperature Control Accuracy | ±2 °C (PID) |
| Nozzle Orifice Diameter | 3.0 mm (optional) |
| Extended Coaxial Atomizer Length | ≥310 mm |
| Minimum Feed Volume | 200 mL per run |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | YC-03 |
| Quotation | Upon Request |
| Sample Type Compatibility | Aqueous Solutions Only |
| Maximum Batch Capacity | 3000 g |
| Temperature Range | 40–150 °C |
| Granule Size Range | Up to 5 mm |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | YC-03 |
| Quotation | Upon Request |
| Sample Type Compatibility | Aqueous Solutions Only |
| Maximum Batch Capacity | 3000 g/batch |
| Temperature Range | 40–150 °C |
| Granule Size Range | Up to 5 mm |
| Brand | PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | YC-3100 |
| Max Feed Rate | 6–10 L/h (aqueous solutions) |
| Particle Size Range | 1–120 µm |
| Operating Environment | Vacuum, Low-Temperature Mode |
| Temperature Control Accuracy | ±2°C |
| Sample Compatibility | Aqueous solutions only |
| Data Export | USB storage (optional), Touchscreen HMI with data logging (optional) |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC1800 |
| Quotation | Upon Request |
| Sample Types | Aqueous Mixtures, Water-Based Solutions |
| Max Feed Rate | 1500 mL/h |
| Inlet Air Temperature Range | 105–200 °C |
| Particle Size Distribution | 1–25 µm |
| Brand | PiloTech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | YC-029 |
| Max Feed Rate | 10,000 mL/h |
| Inlet Air Temperature Range | 105–300 °C |
| Particle Size Output | 1–120 µm |
| Sample Compatibility | Aqueous Solutions Only |
| Heating Power | 20 kW |
| Noise Level | <60 dB(A) |
| Control Interface | Bilingual (English/Chinese) Touchscreen LCD |
| Construction Material | AISI 304 Stainless Steel (Drying Chamber, Cyclone, Collection Vessel & Tubing) |
| Temperature Control Accuracy | ±2 °C (PID-based) |
| Nozzle Orifice | 3.0 mm (optional) |
| Minimum Sample Volume | 200 mL |
| Real-time Display | Inlet Temp, Peristaltic Pump Speed, Fan Frequency |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | YC-500 |
| Sample Type | Aqueous solutions (organic solvents compatible with optional nitrogen recirculation system) |
| Max Feed Rate | 500 mL/h |
| Inlet Temperature Range | Up to 200 °C |
| Outlet Temperature Range | As low as 80 °C (solvent-dependent) |
| Particle Size Distribution | 1–25 µm |
| Nozzle Diameter | 1.0 mm standard (0.5/0.8/1.5/2.0 mm optional) |
| Construction Material | Full SUS304 stainless steel |
| Power Supply | 2 kW / 220 V |
| Display | Color LCD touchscreen with real-time animation |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | YC-018A |
| Sample Type Compatibility | Multiphase Liquids (Aqueous & Organic Solutions) |
| Maximum Feed Rate | 3000 mL/h |
| Inlet Air Temperature Range | Up to 200 °C |
| Particle Size Distribution | 1–80 µm |
| Oxygen Monitoring Threshold | Auto-Shutdown at ≥2.5% O₂ |
| Nozzle Diameter | Standard 1.5 mm (Optional: 0.5 / 0.8 / 1.0 / 2.0 mm) |
| Temperature Control Accuracy | ±2 °C (PID) |
| Integrated Solvent Recovery | Yes (Condensation-Based) |
| Nitrogen Recirculation System | Yes |
| Optional Cryogenic Cooling Module | Available |
| Brand | PiloTech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-029 |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 10,000 mL/h |
| Inlet Air Temperature Range | 105–300 °C |
| Particle Size Range | 1–120 µm |
| Heating Power | 20 kW |
| Noise Level | <60 dB(A) |
| Control Interface | Bilingual (English/Chinese) Touchscreen LCD |
| Material Contact Parts | AISI 304 Stainless Steel |
| Temperature Control Accuracy | ±2 °C (PID) |
| Nozzle Orifice | 3.0 mm (optional) |
| Extended Coaxial Atomizer Length | ≥310 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | YC-1800 |
| Price | USD 12,000 (FOB Shanghai) |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 1000–1500 mL/h |
| Inlet Air Temperature Range | 105–200 °C |
| Particle Size Distribution | 1–25 µm |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | YC-510 |
| Quotation | Upon Request |
| Sample Type Compatibility | Aqueous Solutions Only |
| Maximum Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | Ambient to 200°C (Vacuum Mode: As Low as 50–55°C) |
| Particle Size Distribution | 1–25 µm |
| Vacuum Level | –0.08 MPa |
| Temperature Control Accuracy | ±1°C (PID-controlled) |
| Nozzle Orifice | Standard 1.0 mm (Optional: 0.5 / 0.8 / 1.5 / 2.0 mm) |
| Minimum Sample Volume | 10–20 mL (dependent on solids content) |
| Total Power Consumption | 3.5 kW |
| Construction Material | Full 316L Stainless Steel |
| Control Interface | Color LCD Touchscreen with Chinese UI (hardware supports multi-language firmware upgrade) |