Testing Machine
Filter
Showing 3001–3030 of 3402 results
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-106 |
| Price Range | USD 1,400 – 7,000 (FOB) |
| Max Test Force | 50 kN |
| Load Rate | 50 N/s |
| Platen Spacing | 300 mm |
| Platen Size | 400 mm × 400 mm |
| Rated DC Output Voltage | 14 kV ±1.5% |
| Rated Capacity | 200 VA |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Operating Temp | −5 °C to +40 °C |
| Relative Humidity | ≤90% at +25 °C |
| Display | Dual Analog Pointer + Digital LCD |
| Protection | Overcurrent Trip, Timed Audible/Visual Alarm |
| Safety | Zero-Position Interlock, Automatic Discharge Circuit |
| Dimensions | 400 mm × 300 mm × 200 mm (W×D×H) |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-107 |
| Price Range | USD 8,500 – 11,500 (FOB) |
| Max Test Force | 50 kN |
| Loading Rate | 50 N/s |
| Platen Spacing | 300 mm |
| Platen Size | 400 mm × 400 mm |
| Rated DC Output Voltage | 4.5 kV |
| Rated AC Output Voltage | 3 kV |
| Output Capacity | 2 kVA |
| Voltage/Current Measurement Accuracy | ±1.5% |
| Operating Ambient | −5°C to +40°C, ≤90% RH at +25°C |
| Power Supply | AC 220 V ±10%, 50 Hz ±1 Hz |
| Display | 4½-digit digital meters + embedded oscilloscope module |
| Safety Features | Zero-position interlock, overcurrent protection, audible/visual timer alarm |
| Isolation | Galvanically isolated input/output circuits |
| Brand | Xutongyongfu |
|---|---|
| Model | XT-100 |
| Rated Output Voltage | 0–50 kV |
| Max Output Current | 3 A @ 50 kV |
| Rated Capacity | 150 kVA |
| Output Frequency | 50 Hz ±5% |
| Waveform Distortion Rate | <1.0% (sinusoidal) |
| Quality Factor (Q) | 30–80 |
| Continuous Duty Cycle | 15 min at full load |
| Operating Ambient | −10°C to +40°C, RH <90% (non-condensing) |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Protection | Overcurrent auto-trip, zero-position interlock, audible/visual timer alarm (0–99.9 s) |
| Accuracy | ±0.5% |
| Compliance | GB 50150–91, DL/T 596–1996, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-105 |
| Price Range | USD 1,400 – 7,000 (based on exchange rate and configuration) |
| Max Test Force | 50 kN |
| Force Loading Rate | 50 N/s |
| Platen Spacing | 300 mm |
| Platen Dimensions | 400 mm × 400 mm |
| Input Voltage | AC 220 V ±10%, 50 Hz |
| Output Voltage | AC 0–250 V (continuously adjustable) |
| Output Current | AC 0–10 A |
| Output Modes | Continuous & Triggered |
| Overcurrent Protection Thresholds | 4.5 A / 9 A |
| Weight | 16 kg |
| Dimensions (W×D×H) | 400 × 300 × 200 mm |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤85% at 20 °C |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT-200 |
| Price Range | USD 7,000–14,000 (FOB) |
| Breakdown Voltage | 20 kV |
| AC Output | 6–15 kV (±1.5% accuracy) |
| DC Output | 10–25 kV (±1.5% accuracy) |
| Max Output Current | 550 mA (with compensating reactor) |
| Transformer Capacity | 1.0–1.5 kVA |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Timer Range | 0–999 s (±0.5% accuracy) |
| Dimensions | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Model | XT200 |
| Output Voltage (AC) | 10 kV (6 kV motor class), 15 kV (10 kV motor class) |
| Output Voltage (DC) | 15 kV (6 kV motor class), 25 kV (10 kV motor class) |
| Max Output Current | 550 mA (with compensating reactor) |
| Rated Transformer Capacity | 1.0–1.5 kVA |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Display | Analog pointer meter |
| Voltage Accuracy | ±1.5% |
| Timing Range | 0–999 s (±0.5% accuracy) |
| Overcurrent Protection | 6.7 A |
| Zero-Position Interlock | Yes |
| Auto Trip on Timeout/Overcurrent | Yes |
| Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Operating Temperature | –15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | XT200-1 |
| Price Range | USD 7,000 – 14,000 (FOB) |
| AC Breakdown Voltage Output | Up to 15 kV (rms) |
| DC Breakdown Voltage Output | Up to 25 kV (dc) |
| Max. Output Current (with reactor compensation) | 550 mA |
| Rated Transformer Capacity | 1.0–1.5 kVA |
| Weight | 22 kg |
| Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Xutongyongfu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XT200-2 |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Maximum Breakdown Voltage | 20 kV AC/DC |
| Output Current | Up to 550 mA (with compensating reactor) |
| Input Power | AC 220 V ±10%, 50 Hz ±1 Hz |
| Accuracy | ±1.5% of reading (voltage), ±0.5% (timer) |
| Timer Range | 0–999 s (selectable in seconds, minutes, hours) |
| Overcurrent Protection | 6.7 A |
| Operating Temperature | −15 °C to +50 °C |
| Relative Humidity | ≤90% at +25 °C |
| Dimensions | 400 × 300 × 300 mm |
| Weight | 22 kg |
| Compliance | GB 50150–2006, DL/T 596–2005, DL/T 848.2–2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20 °C to 130 °C |
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2% RH |
| Chamber Models | OK-ZTH-408 (60×85×80 cm), OK-ZTH-800 (100×100×80 cm), OK-ZTH-1000 (100×100×100 cm) |
| Refrigeration | French Tecumseh hermetic compressor |
| Dryer Filter | USA Parker Hannifin (AEGO) |
| Oil Separator | China Guanya |
| Solenoid Valve | Italy Castel |
| Vibration Exciter | Japan ThreeBand coil bonding adhesive, IMV temperature sensors, Tohbu stainless mesh diaphragm |
| Power Amplifier | Siemens switches/contactors, Sanyo power modules, Motorola output devices, Fuji protective fuses |
| Cabinet Construction | A3 steel exterior with powder coating, SUS304 stainless steel interior, ultra-fine glass wool insulation |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 2423.5, GJB 150.18–1986 |
| Drive Type | Pneumatic + Electromagnetic Hybrid |
| Max Payload Capacity | Up to 2× Rated Load (Model-Dependent) |
| Platform Material | Monolithic Cast Aluminum Alloy |
| Guidance System | Chrome-Plated Precision Linear Rails |
| Impact Repeatability | ±0.5 mm (via Photoelectric Height Sensing) |
| Built-in Damping Base | High-Mass Isolation Substructure |
| Operating Mode | Sweep, Fixed-Frequency, Shock Pulse, Random Vibration (with Optional Controller) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Model | OK-ES-10 |
| Max. Load Capacity | 70 kg |
| Effective Table Size | 1.2 m × 1.1 m |
| Stroke (Peak-to-Peak Amplitude) | 25.4 mm |
| Speed Range | 60–300 rpm |
| Speed Resolution | ±1 rpm |
| Drive Motor | 1 HP DC Motor with Smooth Start |
| Transmission | Synchronous Silent Belt |
| Control Mode | DC Speed Regulation |
| Timer Range | 0 s – 99 h |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 230 kg |
| Base Construction | Heavy-Duty C-Channel Steel Frame with Anti-Vibration Rubber Mounts |
| Table Surface | Stainless Steel |
| Sample Fixation | Aluminum Fixture with Manual Knob Adjustment |
| Compliance Standards | ASTM D999, ISO 2247, EN 71-1, ISTA 3A/3E |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz |
| Max Acceleration | <20 g |
| Max Displacement (p-p) | ≤5 mm |
| Load Capacity | 100 kg |
| Vibration Waveform | Sine (Half/Full Cycle) |
| Axes | Vertical + Horizontal (X/Y/Z orthogonal) |
| Control Modes | Fixed Frequency, Sweep, Programmable (15-segment), Logarithmic, Octave |
| Display Resolution | 0.01 Hz (frequency), ±0.1 Hz accuracy |
| Operating Temperature | 5–40 °C (24-hr avg ≤25 °C) |
| Humidity | ≤85% RH |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 300kN |
| Max Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% |
| Stroke | 1,000 mm |
| Maximum Test Length (Gauge Length Extension) | 10 m |
| Piston Speed (No-Load) | ≥100 mm/min |
| Controlled Loading Speed | 0.5–80 mm/min |
| Control System | Electro-hydraulic servo with real-time PC-based closed-loop control |
| Display Interface | Industrial PC with LCD monitor and dedicated tensile testing software |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | 300kN Computer-Controlled Hydraulic Horizontal Tensile Testing Machine |
| Instrument Type | Hydraulic Tensile Testing Machine |
| Maximum Test Force | 300 kN |
| Force Measurement Range | 4–100% FS |
| Force Accuracy | ≤ ±1% FS |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CSL-1 |
| Sample Dimensions Supported | 10×10×55 mm, 10×7.5×55 mm, 10×5×55 mm |
| Notch Types | V-notch (GB/T 229–2007, ISO 148-1:2016 compliant) and U-notch (2 mm root radius, GB/T 229–2007) |
| Notching Stroke | 350 mm |
| Feed Rate | 2.5 mm/min |
| Overall Dimensions (L×W×H) | 350×350×700 mm |
| Net Weight | 80 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CST-50 |
| Projection Screen Size | 200 × 200 mm (graduated scale etched on optical glass) |
| Stage Dimensions | Square stage 110 × 125 mm |
| Stage Travel | Longitudinal ±10 mm, Transverse ±10 mm, Vertical ±12 mm |
| Stage Rotation | 0–360° continuous |
| Total Optical Magnification | 50× (Objective: 2.5×, Projection Lens: 20×) |
| Illumination Source | 12 V / 100 W halogen tungsten lamp |
| Power Supply | 220 V AC, 50 Hz |
| Overall Dimensions | 515 × 224 × 603 mm |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | JB-300 |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 300 J (large hammer), 150 J (small hammer) |
| Impact Velocity | 5.0 m/s |
| Pendulum Pre-lift Angle | 135° |
| Support Span | 40 mm |
| Anvil Radius (Support Edge) | R1.0–R1.5 mm |
| Striking Edge Radius (Hammer Nose) | R2.0–R2.5 mm |
| Distance from Pendulum Center to Impact Point | 800 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Overall Dimensions (L×W×H) | 1000 × 630 × 1520 mm |
| Net Weight | 350 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | JB-300B |
| Impact Energy | 150 J / 300 J |
| Impact Velocity | 5.2 m/s |
| Compliance | GB/T 229-2007, GB/T 3803-2002 |
| Display Type | Analog Dial Gauge |
| Control Mode | Semi-Automatic (Electromechanical Pendulum Release & Auto-Reset) |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JB-300C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 300 J / 150 J (achieved via adjustable counterweights) |
| Impact Velocity | 5.2 m/s |
| Pendulum Pre-Lift Angle | 150° |
| Specimen Support Span | 40 mm |
| Support Anvil Radius | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm and R8 mm |
| Distance from Pendulum Pivot to Impact Point | 750 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Power Supply | 3-phase, 4-wire, 50 Hz, 380 V, 180 W |
| Overall Dimensions | 2124 × 600 × 1340 mm |
| Angular Resolution | ±0.1° |
| Axial Positioning Accuracy | ±0.05 mm |
| Net Weight | 450 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JB-50 |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 50 J (large hammer), 25 J (small hammer) |
| Impact Velocity | 4.0 m/s |
| Pre-lift Angle | 150° |
| Support Span | 40 mm |
| Anvil Radius | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm |
| Distance from Pendulum Center to Impact Point | 550 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Overall Dimensions | 800 × 530 × 1200 mm |
| Weight | 150 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | JB-500B |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energies | 250 J, 500 J |
| Impact Velocity | 5.4 m/s |
| Pendulum Arm Length (from pivot to impact point) | 800 mm |
| Specimen Support Span | 40 mm |
| Anvil Radius (support edge) | R1–R1.5 mm |
| Striking Edge Radius | R2–R2.5 mm |
| Striking Blade Thickness | 16 mm |
| Angular Accuracy | ±0.1° |
| Standard Specimen Dimensions | 10 mm × 10 mm × 55 mm |
| Overall Dimensions (L×W×H) | 2300 mm × 600 mm × 1400 mm |
| Net Weight | 550 kg |
| Power Supply | 3-phase AC 380 V ±10%, 50 Hz, 5 A |
| Ambient Requirements | Non-corrosive environment, free from mechanical vibration and strong electromagnetic fields |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JB-500C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 250 J / 500 J (achieved via interchangeable pendulum weights) |
| Impact Velocity | 5.4 m/s |
| Pendulum Pre-lift Angle | 150° |
| Support Span | 40 mm |
| Anvil Radius (support) | R1.0–R1.5 mm |
| Striking Edge Radius | R2.0–R2.5 mm |
| Striking Blade Thickness | 16 mm |
| Distance from Pendulum Axis to Impact Point | 800 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Power Supply | 3-phase, 4-wire, 50 Hz, 380 V, 180 W |
| Overall Dimensions (L×W×H) | 2124 × 600 × 1340 mm |
| Minimum Resolution | 2.5 J |
| Axial Positioning Accuracy | ±0.05 mm |
| Net Weight | 450 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JB-50B |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 50 J (large hammer), 25 J (small hammer) |
| Impact Velocity | 3.8 m/s |
| Pendulum Torque (Impact Constant) | M = 26.7680 N·m (50 J), 13.3840 N·m (25 J) |
| Pendulum Pre-lift Angle | 150° |
| Span Between Supports | 40 mm |
| Support Anvil Radius | R1.0–R1.5 mm |
| Impact Blade Radius | R2.0–R2.5 mm (Charpy), R8 mm (Izod) |
| Distance from Pendulum Center to Impact Point | 470 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm (also compatible with 7.5 × 7.5 × 55 mm and 5 × 5 × 55 mm) |
| Power Supply | 3-phase, 4-wire, 50 Hz, 380 V, 120 W |
| Overall Dimensions | 2124 × 600 × 1340 mm |
| Net Weight | 150 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JB-750C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energies | 750 J, 600 J, 450 J, 300 J, 150 J |
| Impact Velocity | 5.5 m/s |
| Pendulum Arm Length (from pivot to impact point) | 825 mm |
| Pre-lift Angle | 150° |
| Anvil Span | 40 mm |
| Specimen Dimensions | 10 × 10 (or 7.5 or 5) × 55 mm |
| Hammer Nose Radius | R2–R2.5 mm (standard R2 mm |
| Hammer Included Angle | 30° |
| Hammer Blade Thickness | 16 mm |
| Specimen Support Surface Tilt | 0° |
| Base Plate Leveling Tolerance | ≤0.2/1000 |
| Power Supply | 3-phase AC 380 V ±10%, 50 Hz, 5 A |
| Net Weight | 2500 kg |
| Overall Dimensions | 2450 × 1200 × 2455 mm |
| Environmental Requirements | Ambient temperature 10–35 °C |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JBDW-450C |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 450 J |
| Impact Velocity | 5.2 m/s |
| Temperature Range | –190 °C to +20 °C (–196 °C achievable with ≥99.99% liquid nitrogen) |
| Specimen Dimensions | 10 mm × 10 mm × 55 mm |
| Anvil Span | 40 mm |
| Hammer Blade Radius | R2–R2.5 mm |
| Hammer Thickness | 16 mm |
| Pendulum Arm Length | 800 mm |
| Pre-lift Angle | 150° |
| Temperature Stability | ±2 °C fluctuation, ≤3 °C gradient |
| Specimen Tray Capacity | 6 positions (4 uniformly cooled) |
| Refrigeration Method | Liquid Nitrogen Cooling |
| Net Weight | 880 kg |
| Power Supply | 3-phase AC 380 V ±10% |
| Overall Dimensions | 1600 mm × 850 mm × 1530 mm |
| Brand | YANRUN |
|---|---|
| Model | JBDW-500Y |
| Type | Pendulum Impact Tester |
| Impact Energy | 250 J, 500 J |
| Impact Velocity | 5.4 m/s |
| Pendulum Arm Length | 800 mm |
| Specimen Span | 40 mm |
| Notch Radius (Anvil) | R1–R1.5 mm |
| Impact Blade Radius | R2–R2.5 mm |
| Blade Thickness | 16 mm |
| Cooling Method | Compressor-Based Refrigeration |
| Temperature Range | 0 °C to –60 °C |
| Temperature Stability | ±1.5 °C fluctuation, ≤2 °C gradient |
| Specimen Dimensions | 10 mm × 10 mm × 55 mm |
| Machine Dimensions (L×W×H) | 1500 mm × 850 mm × 1340 mm |
| Net Weight | 850 kg |
| Power Supply | 3-phase AC 380 V ±10%, 50 Hz, 5 A |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JBN-300 |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energies | 150 J, 300 J |
| Impact Velocity | 5.2 m/s |
| Pendulum Arm Length (from axis to impact point) | 750 mm |
| Specimen Support Span | 40 mm |
| Anvil Radius (Charpy/Izod) | R1–R1.5 mm |
| Hammer Nose Radius | R2–R2.5 mm |
| Hammer Blade Thickness | 16 mm |
| Angular Accuracy | ±0.1° |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Machine Dimensions (L×W×H) | 2300 × 600 × 1400 mm |
| Net Weight | 550 kg |
| Power Supply | 3-phase AC 380 V ±10%, 50 Hz, 5 A |
| Environmental Requirements | Non-corrosive atmosphere, vibration-free installation site, absence of strong electromagnetic fields |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JBS-300B |
| Instrument Category | Charpy/Izod Impact Tester |
| Nominal Impact Energy | 150 J / 300 J |
| Impact Velocity | 5.2 m/s |
| Pendulum Center-to-Anvil Distance | 750 mm |
| Specimen Span | 40.0 ± 0.2 mm |
| Pendulum Pre-lift Angle | 150° |
| Impact Blade Radius | R2–R2.5 mm (standard), R8 ± 0.05 mm (optional) |
| Specimen Dimensions | 10 × 10 × 55 mm (also compatible with 7.5, 5, and 2.5 mm thickness variants) |
| Anvil Radius | R1–R1.5 mm |
| Compliance | GB/T 229–2007, GB/T 3803–2002 |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JBS-300C |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 300 J (large hammer), 150 J (small hammer) |
| Impact Velocity | 5.2 m/s |
| Pendulum Pre-Lift Angle | 150° |
| Specimen Support Span | 40 mm |
| Support Anvil Fillet Radius | R1.0–R1.5 mm |
| Striking Edge Fillet Radius | R2.0–R2.5 mm and R8 mm |
| Distance from Pendulum Pivot to Impact Point | 750 mm |
| Standard Specimen Dimensions | 10 × 10 × 55 mm |
| Power Supply | 3-phase, 4-wire, 50 Hz, 380 V, 180 W |
| Overall Dimensions | 2124 × 600 × 1340 mm |
| Angular Accuracy | ±0.1° |
| Axial Positioning Accuracy | ±0.05 mm |
| Net Weight | 450 kg |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | JBS-300Z |
| Impact Energy | 150 J / 300 J |
| Impact Velocity | 5.2 m/s |
| Compliance | GB/T 229–2007, GB/T 3803–2002 |
| Control System | Microcontroller-Based Digital Measurement & Display |
| Output | Printed Test Reports (Absorbed Energy, Pendulum Lift Angle, Mean Value) |