Testing Machine
Filter
Showing 3091–3120 of 3402 results
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.145-L |
| Temperature Range | −70 °C to +30 °C (standard) |
| Specimen Dimensions | Parallel section width 2.0 ± 0.2 mm, length 50.0 ± 0.2 mm or 100.0 ± 0.2 mm, thickness 2.0 ± 0.2 mm, grip separation 50 mm or 100 mm |
| Displacement Measurement | Optical scale sensor, resolution ±0.1 mm, max travel 200 mm |
| Heating Rate | 1 °C/min |
| Thermal Medium Volume | ~27 L |
| Power Supply | AC 200 V, 3-phase, 30 A, 50/60 Hz |
| Safety Features | Interlocked safety enclosure, O-ring chucks |
| Footprint (4-station) | W1110 × D830 × H1870 mm, ~320 kg |
| Footprint (6-station) | W1170 × D830 × H1870 mm, ~370 kg |
| Compliance | JIS K6261, ASTM D1329, ISO 2921 |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.151 |
| Standard Compliance | JIS K6264-2, ISO 4649, DIN 53516 |
| Test Specimen | Disc-shaped, φ16.0 ± 0.2 mm diameter, 6–10 mm thickness |
| Drum Diameter | φ150 mm, Length: 460 mm |
| Drum Rotational Speed | 40 ± 1 rpm |
| Specimen Traverse Speed | 2.8 mm/s |
| Applied Load | 10.0 ± 0.2 N or 5.0 ± 0.1 N |
| Abrasive Cloth Width | ≥400 mm, Material: Aluminum Oxide, Grit Size: P60 |
| Power Supply | AC 100 V, Single-phase, 10 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 750 × 430 × 430 mm |
| Weight | Approx. 52 kg |
| Optional | Low-Temperature Chamber Integration |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.151-OV |
| Standards | JIS K6264-2, ISO 4649, DIN 53516 |
| Drum Diameter | φ150 mm |
| Drum Length | 450 mm |
| Rotational Speed | 10–100 rpm (standard: 40 ± 1 rpm) |
| Specimen Feed Rate | 1.5–15 mm/s (standard: 2.8 mm/s) |
| Applied Load | 5.0 ± 0.1 N or 10.0 ± 0.2 N |
| Specimen Dimensions | φ16.0 ± 0.2 mm × 6–10 mm |
| Abrasive Belt Width | ≥400 mm |
| Abrasive Material | Aluminum Oxide |
| Grit Size | P60 |
| Max Oven Temperature | 100 °C |
| Power Supply | AC 200 V, 3-phase, 20 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈1130 × 920 × 745 mm |
| Weight | ≈255 kg |
| Accessories | Dust Extraction Unit, Specimen Alignment Gauge, Certified Reference Specimen (1 pc), Metallic Calibration Specimens (2 pcs), Punching Tool for Specimen Preparation |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.170 |
| Test Standards | JIS K6734, K6745, K6773, K6924-2, ASTM D1043, ISO 458 |
| Sample Dimensions | 6.35 ± 0.03 mm (W) × 64 mm (L) × 0.8–1.5 mm (T) |
| Gauge Length | 40 mm |
| Angular Scale | 0–360° (1° graduation) |
| Temperature Range | −60 to +100 °C (dry ice cooling enabled) |
| Heating Rate | 2 °C/min |
| Torque Application | Pulley-and-weight system with 5 g, 10 g, 20 g, and 50 g calibrated masses |
| Accessories | Vacuum desiccator bottle, two calibrated thermometers, specimen cutting knife, hole punch, specimen alignment gauge |
| Power Supply | 220 V, single-phase, 10 A, 50/60 Hz |
| Dimensions & Weight | Approx. 300 × 400 × 780 mm (W×D×H), ~40 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.181 |
| Compliance | ASTM D3420 |
| Configuration | Pendulum-type impact tester with calibrated energy scale and interchangeable impact spheres |
| Optional Variant | Low-temperature L-type version (for sub-ambient testing) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.183 |
| Instrument Type | Falling Ball / Falling Dart Impact Tester |
| Drop Height Range (Ball Mode) | 50–2000 mm (50 mm increments) |
| Drop Height Range (Dart Mode) | 100–2000 mm |
| Standard Weights (Ball) | Customizable per specification |
| Standard Weights (Dart) | 1 kg, 3 kg, 9 kg (cylindrical flat-bottom) |
| Anvil Types | Flat anvil, V-notch anvil |
| Height Adjustment | Manual mechanical scale with vernier readout |
| Release Mechanism | Electromagnetic solenoid release with anti-rebound ratchet lock |
| Compliance Standards | JIS K5400, K5600-5-3, K6718, K6745, K7211, K6724, K6743, ISO 6272, GB/T 14485 |
| Power Supply | AC 100 V, 1φ, 3 A (Ball mode) |
| Host Dimensions (approx.) | W700 × D500 × H1870 mm (Ball), W800 × D800 × H3000 mm (Dart) |
| Weight | 130 kg (Ball), 200 kg (Dart) |
| Included Accessories | Leveling pendulum device (1 pc), foot-operated switch, operator control panel (W200 × D280 × H215 mm, ~7 kg) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.183-BT |
| Compliance | JIS Z 0237 |
| Test Principle | Inclined-plane ball tack adhesion measurement |
| Configuration | Fixed-angle and variable-angle options available |
| Application | Pressure-sensitive adhesive (PSA) tapes, labels, and film coatings |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.184-B |
| Applicable Standards | JIS A1454, JIS A5705 |
| Test Load | 356 N (10 min) / 222 N (5 min for foam) |
| Recovery Time | 60 min post-load removal |
| Load Application Duration | 10 min (standard), 5 min (foam) |
| Measurement | Residual indentation depth (mm) |
| Compliance | JIS-certified test configuration |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.185 |
| Max. Load | 50 N (dead-weight type) |
| Temperature Range | Up to 200 °C |
| Parallel Plate Diameter | φ40 mm (optional: UL-compliant φ3/4″ or φ3/8″) |
| Thickness Displacement Measurement | Analog dial indicator (0.01 mm resolution, 10 mm max travel) |
| Specimen Support Configurations | 1-, 3-, or 5-station modular frame |
| Included Accessory | Radius R5 mm metal mandrel |
| Power Supply | AC 200 V, single-phase, 15–30 A, 50/60 Hz |
| Dimensions & Weight | 1-station: ~780 × 825 × 1800 mm (W×D×H), ~142 kg |
| 3-station | ~1250 × 1120 × 1800 mm, ~286 kg (benchtop height option: H = 952 mm) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.197 |
| Applicable Standards | JIS K6542, JIS K6545 |
| Test Angle | 22.5° |
| Sample Thickness Range | ≤ 3 mm |
| Cycle Count Range | 0–100,000 cycles (programmable) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.197-LFR |
| Bend Angle | 22.5° |
| Bend Rate | 100 ± 5 cycles/min |
| Specimen Size | 70 × 45 mm |
| Test Stations | 12 |
| Temperature Range | −35 to +60 °C (compressor-cooled) |
| Timer | 8-digit preset timer & 9-digit total cycle counter |
| Power Supply | AC 200 V, 3-phase, 30 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈1300 × 1150 × 1450 mm |
| Weight | ≈428 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.199 |
| Dielectric Breakdown Voltage | 100 kV |
| Compliance Standards | GB/T 1408.1, IEC 60243-1, IEC 60851-5, JIS C2110 (C3003), JIS C3216-5 |
| Safety Features | Interlocked safety door, dual-start push buttons, emergency stop, acrylic + mesh steel test chamber, visual/audible alarm tower, key-operated preparation switch |
| Output Options | Touchscreen display, mini thermal printer, CSV data export |
| Drive System | Motor-driven variable-ratio transformer for precise and repeatable voltage ramping |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.201-R |
| Cooling Method | Integrated Mechanical Refrigeration System |
| Test Temperature Range | Up to –40 °C (with heat transfer medium) |
| Heat Transfer Medium Volume | ~16 L |
| Specimen Dimensions | 20 mm width × 100 mm length (folded), 20 mm spacing, 5 mm depth |
| Anvil Quantity | 6 stations |
| Impact Mass | 2.5 kg |
| Drop Height | 50 mm |
| Test Duration | 5 min pre-cooling before impact |
| Compliance Standards | JIS K6404-13, JIS K6772, ISO 4675 |
| Power Supply | AC 200 V, 3-phase, 20 A, 50/60 Hz |
| Dimensions (W×D×H) | ~1250 × 650 × 1100 mm |
| Weight | ~295 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.208 |
| Standards | JIS C 3406, JASO D 611, ISO 6722 |
| Specimen Length | 900 mm (JIS) / 1000 mm (JASO/ISO) |
| Indenter Tip Radius | R114 mm |
| Initial Load | 450 g / 0.63 ± 0.05 N |
| Adjustable Load Range | 50–1500 g |
| Conductor Support Shaft Diameter | φ7 mm (JIS) / φ6.9 mm (JASO/ISO) |
| Abrasive Tape Material | Type A, Grit #J180, Spacing: 150 mm (JIS/JASO) / 75 mm (ISO) |
| Contact Width | 10 mm |
| Tape Traverse Speed | 1500 mm/min (±75 mm/min for JASO/ISO) |
| Specimen Rotation Angles | 0°, 90°, 180°, 270° (JASO/ISO only) |
| Counter | 6-digit presettable digital counter |
| Power Supply | AC 100 V, 1-phase, 5 A, 50/60 Hz |
| Host Dimensions/Weight | ≈ W620 × D400 × H510 mm / ≈ 50 kg |
| Control Panel | ≈ W200 × D420 × H315 mm / ≈ 10 kg |
| Total System (incl. LT base) | ≈ W620 × D300 × H500 mm / ≈ 70 kg |
| Included | 5 abrasive tapes |
| Optional | Safety guard |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.210 |
| Instrument Type | Reciprocating Tribological Tester |
| Standard Compliance | NEMA C9.5, JASO E 402, ISO 6722 |
| Stroke Distance | 10 mm (NEMA) / 15.5 ± 1 mm (ISO/JASO) |
| Reciprocating Frequency | 60 cycles/min (NEMA) / 55 ± 5 cycles/min (ISO/JASO) |
| Load Range | 2–10 N (adjustable |
| Abrading Tip Diameter | φ0.4 mm (NEMA) / φ0.45 ± 0.01 mm (ISO/JASO) |
| Specimen Holder Spacing | 71 mm (center-to-center |
| Rotation Angles | 0°, 120°, 240° (NEMA) / 0°, 90°, 180°, 270° (ISO/JASO) |
| Counter | 6-digit presettable digital counter |
| Safety Enclosure | Integrated polycarbonate shield |
| Power Supply | AC 100 V, single-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈ 480 × 447 × 600 mm |
| Weight | ≈ 33 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.215 |
| Standard Compliance | JIS C 3003, IEC 60172, IEC 60851, NEMA C9.5 |
| Scratching Distance | 100 mm |
| Scratching Speed | 400 ± 40 mm/min |
| Load Range | 100 gf to 3.2 kgf (initial) |
| Piano Wire Diameter | φ0.23 ± 0.01 mm |
| Specimen Rotation Angles | 0°, 120°, 240° (optional) |
| Safety Enclosure | Integrated |
| Power Supply | AC 100 V, Single-phase, 5 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 560 × 470 × 490 mm |
| Weight | Approx. 45 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.236 |
| Compliance Standard | JIS K 6548 |
| Test Principle | Ball Burst / Internal Pressure Deformation Test |
| Sample Thickness Range | Suitable for thin leathers (e.g., shoe uppers, garment leathers) |
| Fixture Type | Annular clamping ring with central spherical indenter (steel ball) |
| Load Measurement | Analog or digital force transducer (configuration dependent) |
| Displacement Resolution | Sub-millimeter precision |
| Output | Peak load (N or kgf) and corresponding penetration height (mm) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.258 |
| Configuration | Pendulum-type impact tester with interchangeable fixtures for Charpy (simply supported beam), Izod (cantilever beam), and tensile impact testing |
| Data Acquisition | Compatible with optical rotary encoder interface for digital data capture and PC-based storage (No.258-PC version) |
| Compliance Context | Designed to support ASTM D6110 (Charpy), ASTM D256 (Izod), ISO 179/ISO 180, and ISO 8256 (tensile impact) test methods |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Instrument Type | Pendulum Impact Tester |
| Test Methods | Charpy (Simply Supported Beam), Izod (Cantilever Beam), Tensile Impact |
| Display | Digital Angle & Energy Readout |
| Configuration | Interchangeable Pendulum & Specimen Fixtures |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy Range | 0.5–50 J |
| Impact Velocities | 2.9 m/s, 3.8 m/s, 3.46 m/s |
| Pendulum Torque (Impact Constant) | 30 N·m/rad |
| Load Cell Range | 0–50 N |
| Maximum Pendulum Lift Height | 150 mm |
| Compliance Standards | JIS K7110, JIS K7111, ASTM D256, ISO 179, ISO 180, GB/T 1043, GB/T 1843 |
| Temperature Control Integration | Integrated Dual-Door Low-Temperature Chamber |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Instrument Type | Pendulum Impact Tester |
| Standards Compliance | JIS K7110, JIS K7111, ASTM D256, ISO 179, ISO 180 |
| Temperature Range | −40 °C to +80 °C (cryogenic chiller-equipped) |
| Pendulum Energy Capacity | 0.5–25 J (Charpy/3-point bending), 1–7.5 J (Izod/cantilever) |
| Sample Capacity | 210 specimens (70 × 3 trays) |
| Specimen Dimensions | 10 mm (w) × 4 mm (t) × 80 mm (l) |
| Automation Features | Auto-specimen feeding, auto-notch positioning, auto-hammer release, auto-test sequencing, integrated低温 chamber (−40 °C to +80 °C), auto-dimension measurement (optional), specimen collection turntable (20-position) |
| Power Supply | AC 100 V, 1φ, 10 A, 50/60 Hz (standard) |
| Pneumatic Supply | ≥0.5 MPa |
| Dimensions (W×D×H) | ≈1150 × 1050 × 1950 mm |
| Weight | ≈700 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.260 |
| Applicable Standards | JIS K6382, JIS K6400-4 |
| Test Method | Fixed-Displacement Cyclic Compression |
| Cycle Count | 80,000 cycles |
| Compression Ratio | 50% of initial thickness |
| Recovery Period | 30 minutes |
| Sample Configuration | Parallel-plate fixture |
| Compliance | JIS-compliant fatigue testing for flexible polyurethane and latex foams |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.270 |
| Applicable Standard | ASTM D1052 |
| Sample Mounting Capacity | 12 specimens (standard), 4 specimens (LFR low-temperature variant) |
| Test Angle | 90° fixed bend |
| Pre-cut Notch | 2.5 mm length at ~62 mm from clamped end |
| Flex Cycle Increment | 100%–500% strain intervals |
| Compliance | ASTM D1052 (Standard Test Method for Resistance of Rubber to Flex Cracking) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.270-LFR |
| Testing Principle | Dynamic Fatigue Bending under Controlled Cryogenic Conditions |
| Standard Compliance | ASTM D1052 |
| Sample Fixation | Clamped Single-End Configuration with Pre-Cut Notch (2.5 mm) |
| Bend Angle | 90° Fixed Angular Displacement |
| Strain Levels | 100%–500% (in 100% increments) |
| Temperature Range | Adjustable Low-Temperature Chamber (Typical Operating Range: −40 °C to +10 °C) |
| Specimen Type | Sole Materials, Vulcanized Rubber, Thermoplastic Elastomers (TPE), and Flexible Polymer Composites |
| Notch Initiation | Standardized 2.5 mm starter crack at ~62 mm from clamped end |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.271 |
| Standard Compliance | ASTM D1630 |
| Test Principle | Rotating Drum Abrasion with Standardized Grit Paper |
| Load Application | Fixed Vertical Deadweight Load |
| Specimen Thickness Reference Point | 2.54 mm (0.1 in) |
| Primary Application Domain | Footwear Sole Materials, Vulcanized & Thermoplastic Elastomers |
| Regulatory Context | Supports ASTM-D1630–compliant QC/QA and GLP-aligned wear resistance reporting |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.275 |
| Compliance | JIS K6264-2, ISO 4649 |
| Test Principle | Rotating abrasive wheel with vertical axis, dual-specimen horizontal mounting under controlled load |
| Application Scope | Vulcanized rubber, thermoplastic elastomers (TPE), tire treads, footwear outsoles |
| Load Range | Standard 26.7 N (adjustable per standard requirements) |
| Specimen Dimensions | 25 mm × 25 mm × 6 mm (typical) |
| Wheel Rotation Speed | 76 ± 2 rpm |
| Abrasion Distance | 40 m (standard cycle) |
| Unit of Result | mm³ loss volume |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.283 |
| Instrument Type | End-Face Tribological Tester |
| Test Standard | JIS K 7218 |
| Specimen Geometry | Flat plate (30 × 30 × 2–5 mm), Disc (φ40 × 2–5 mm), Hollow Cylinder (OD φ25.6 mm, ID φ20 mm, L 15 mm) |
| Applied Load Range | 50–500 N (1 N resolution, servo motor + ball screw actuation) |
| Max Operating Temperature | 130 °C |
| Friction Torque Measurement | Up to 200 N·cm (load cell-based) |
| Displacement Range | 32 mm (0.01 mm resolution) |
| Sliding Speed | 0.2–200 cm/s (JIS A-spec: 50 ± 2.5 cm/s) |
| Optional Rotational Speed | 10–1,500 rpm |
| Environmental Options | Oil bath, water bath |
| Power Supply | AC 100 V, 1φ, 15 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈ 810 × 900 × 1560 mm |
| Weight | ≈ 267 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.304-YPH |
| Applicable Standards | JIS K6404-11, JIS P8112, JIS P8131, TAPPI T403, TAPPI T807, TAPPI T810, ISO 2758, ISO 2759 |
| Test Principle | Hydraulic diaphragm pressure burst with clamped circular specimen |
| Pressure Range | High-pressure configuration (typically up to 2.0 MPa or ~20 kgf/cm², per JIS/ISO compliance) |
| Clamping Method | Manual mechanical clamp |
| Specimen Diameter | 11.3 cm (standard, per ISO 2758/TAPPI T403) |
| Compliance | GLP-ready architecture, audit-trail capable with optional digital recorder |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.307 |
| Standards Compliance | JIS C5016, ASTM D2176, TAPPI T511, ISO 5626, P8115, R3420 |
| Loading Options | Spring-Loaded or Fixed-Load Mode |
| Folding Angle | ±135° |
| Motion Profile | Reciprocating Bending at Defined Frequency |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.311 |
| Standard Compliance | JIS L1018, JIS L1085, JIS L1096, TAPPI T543 |
| Specimen Width | 1/2″, 1″, 2″ |
| Specimen Length | 1″, 1½″, 2½″, 3½″, 4½″ |
| Clamp Position from Pendulum Tip | 1/2″, 1″, 1½″, 2″, 2½″, 3″, 3½″, 4″ |
| Arm Rotation Speed | 2 rpm |
| Weights | 5 g, 25 g, 50 g, 200 g |
| Weight Arm Lever Positions from Pivot | 1″, 2″, 4″ |
| Scale Range | ±0–8 (graduation: 0.2) |
| Power Supply | AC 100 V, Single-phase, 1 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈350 × 200 × 500 mm |
| Weight | ≈7 kg |