Water Quality Analysis
Filter
Showing 541–570 of 3685 results
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SUPEC 5000 TPTN |
| Application | Total Phosphorus (TP) and Total Nitrogen (TN) |
| Instrument Type | Laboratory-Based Analyzer |
| Measurement Principle | Spectrophotometry (UV-Vis) with Potassium Persulfate Digestion |
| Compliance Standards | GB 11893, HJ 636, National Surface Water Monitoring Guidelines |
| Safety Features | 9-layer pressure vessel safety protection, automated lid actuation, 120 °C precision temperature control |
| Automation Level | Full walk-away operation from sample loading to report generation |
| Sample Throughput | Batch processing with customizable multi-tube sample trays |
| Reagent Delivery | Independent parallel multi-channel injection system |
| Detection System | Dual-wavelength UV-Vis spectrophotometric detection module |
| Robotic Platform | High-precision articulated robotic arm with cup-position recognition |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SUPEC 5010 |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SUPEC 5100 |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SUPEC 5240 Series |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SUPEC 6010 |
| Quotation | Upon Request |
| Instrument Type | Online Analyzer |
| Detection Principle | Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) |
| Target Elements | Multi-Element (e.g., As, Cd, Cr, Cu, Ni, Pb, Zn, Hg, Mn, Fe, Al, etc.) |
| Compliance Standard | HJ 776–2015 “Determination of 32 Elements in Water by ICP-OES” |
| Automation Level | Fully Automated (Sampling, Filtration, Pre-treatment, Analysis, QC, Data Acquisition & Transmission) |
| Detection Range | Sub-ppb to ppm (full dynamic range) |
| Measurement Cycle | < 5 minutes per sample (multi-element simultaneous analysis) |
| Interference Resistance | Immune to color, turbidity, and matrix-induced spectral overlap under optimized plasma conditions |
| Waste Generation | Minimal reagent consumption |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Model | WOT-3100 |
| Application | Organic Contaminant Source Identification via Fluorescence Excitation-Emission Matrix (EEM) Fingerprinting |
| Detection Principle | UV-Vis Fluorescence Spectroscopy (200–450 nm excitation |
| Operational Mode | Reagent-Free, Non-Destructive Optical Analysis |
| Deployment Flexibility | Benchtop, Mobile (Vehicle/Boat-Mounted), Field-Deployable |
| Data Integration Capability | Compatible with Heavy Metal Analyzers and Organic Pollutant Sensors for Multi-Parameter Emergency Response |
| Brand | ExStik |
|---|---|
| Origin | Shanghai, China |
| Model | CL200 |
| Instrument Type | Portable |
| Measurement Principle | Electrochemical Amperometric Sensor |
| Measured Parameter | Total Residual Chlorine |
| Range | 0.01–10.00 ppm |
| Accuracy | ±10% of reading or ±0.01 ppm (0.05–5.00 ppm) |
| Repeatability | ±0.01 ppm |
| Resolution | 0.01 ppm |
| LOD | 0.05 ppm |
| Temperature Range | −5 to 90 °C |
| Temp. Resolution | 0.1 °C/°F |
| Temp. Accuracy | ±1 °C (−5 to 50 °C) |
| Data Storage | 15 readings |
| Power | 4 × CR2032 (1.5 V) |
| Auto-off | After 10 min idle |
| IP Rating | IP57 |
| Brand | ExStik |
|---|---|
| Origin | Shanghai, China |
| Model | CL200+ |
| Measurement Principle | Amperometric Electrode with Solid-State Platinum/Graphite Composite Sensor |
| Range | 0.01–10.00 ppm (Total/Free Chlorine) |
| Accuracy | ±10% of reading ±0.01 ppm (0.05–5.00 ppm) |
| Temperature Compensation | Automatic (–5 to 90 °C) |
| Temp. Accuracy | ±1 °C (–5 to 50 °C), ±3 °C (50 to 90 °C) |
| Display | Multi-segment LCD with bar graph |
| Data Storage | 15 readings |
| Power | 4 × SR-44 (1.5 V) button cells |
| Auto-off | After 10 min idle |
| Electrode Compatibility | Interchangeable residual chlorine, pH, and ORP sensors with auto-detection |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–19.999 pX |
| Resolution | 0.001/0.01/0.1 pX (adjustable) |
| mV Range | −1999.9 to +1999.9 mV |
| mV Resolution | 0.1/1 mV (adjustable) |
| Temperature Range | −5.0 to +105.0 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Accuracy | ±0.3 °C ±1 digit |
| pX Accuracy | ±0.005 pX ±1 digit |
| mV Accuracy | ±0.03% FS ±1 digit |
| Input Impedance | ≥3 × 10¹² Ω |
| Calibration Points | Up to 2-point auto-identification |
| Response Time | ≤3 s |
| Temperature Compensation | Automatic or Manual (−5.0 to +105.0 °C) |
| Data Output | RS232 serial interface |
| Electrode Interface | Universal BNC + temperature sensor port |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C Fluoride Ion Meter |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–19.999 pX |
| Resolution | 0.001/0.01/0.1 pX (adjustable) |
| Accuracy | ±0.005 pX ±1 digit |
| mV Range | −1999.9 to +1999.9 mV |
| mV Resolution | 0.1/1 mV (adjustable) |
| mV Accuracy | ±0.03% FS ±1 digit |
| Temperature Range | −5.0 to +105.0 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Accuracy | ±0.3 °C ±1 digit |
| Temperature Compensation | Automatic or Manual (−5.0 to +105.0 °C) |
| Input Impedance | ≥3 × 10¹² Ω |
| Calibration Points | Up to 2-point |
| Response Time | ≤3 s |
| Electrode Interface | BNC + RTD (Pt1000 or thermistor) |
| Communication Interface | RS232 |
| Data Storage | Internal calibration history and measurement logs |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Certifications | ISO 9001 certified |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PXJ-1C+ Ammonia-Sensitive Ion Meter |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.2 °C ±1 digit |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage Capacity | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| pH Range | −10.000 to 20.000 |
| pH Resolution | 0.001/0.01/0.1 pH (selectable) |
| pH Accuracy | ±0.002 pH ±1 digit |
| mV Range | −2000.00 to 2000.00 mV |
| mV Resolution | 0.01/0.1/1 mV (selectable) |
| mV Accuracy | ±0.02% FS ±1 digit |
| Units Supported | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| Interface | BNC electrode port, Pt1000/NTC temperature input, USB, RS232, 0–20 mV analog output |
| Power Supply | DC 9 V, 500 mA (center-positive) |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Ammonium Ion Meter |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0–135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage Capacity | 4,096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Temperature Compensation | Automatic (ATC) or Manual |
| Communication Interfaces | USB, RS-232, 0–20 mV analog output |
| Power Supply | DC 9 V, 500 mA (center-positive) |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0–135.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.2 °C ±1 digit |
| Input Impedance | ≥3×10¹² Ω |
| Data Storage Capacity | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Supported Units | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| Interface | BNC electrode port, Pt1000/NTC temperature input, USB, RS232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Resolution | 0.001 (pH), 0.01 mV |
| Temperature Range | −20.0 to 135.0 °C |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Model | PXJ-1C+ Borate Ion Analyzer |
| Instrument Type | Benchtop Multi-Ion Analyzer |
| Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Resolution | 0.001 |
| Temperature Range | −20.0–135.0 °C |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Bromide Ion Analyzer |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage Capacity | 4,096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Supported Units | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| Temperature Compensation | Automatic (ATC) or Manual |
| Interface | BNC electrode port, Pt1000/NTC temperature input, USB, RS-232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Data Storage Capacity | 4,096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Supported Units | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| Temperature Compensation | Automatic (ATC) or Manual |
| Input Impedance | ≥3 × 10¹² Ω |
| Interface | BNC electrode port, Pt1000/NTC temperature input, USB, RS232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ CO₂ Ion Analyzer |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage | 4,096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Temperature Compensation | Automatic (ATC) or Manual |
| Communication Interfaces | USB, RS-232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Chloride Ion Analyzer |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0–135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Data Storage Capacity | 4096 records |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Compliance | GLP-compliant |
| Interface | USB, RS-232, 0–20 mV analog output |
| Input Impedance | ≥3×10¹² Ω |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Cyanide Ion Analyzer |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Data Storage | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Input Impedance | ≥3 × 10¹² Ω |
| Interfaces | BNC electrode port, Pt1000/NTC temperature input, USB, RS-232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Data Storage Capacity | 4096 records |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Supported Units | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| Temperature Compensation | Automatic (ATC) or Manual |
| Input Impedance | ≥3 × 10¹² Ω |
| Interface | BNC electrode port, Pt1000/NTC temperature input, USB, RS232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99,999 ppm |
| Detection Limit | 9,999 ppm |
| Response Time | 3 s |
| Measurement Resolution | 0.001 (pH), 0.01 mV, 1–3 significant digits (ion concentration) |
| Temperature Range | −20.0 to 135.0 °C |
| Temperature Resolution | 0.1 °C |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage Capacity | 4,096 sets |
| Calibration Points | 2–9-point ion calibration |
| GLP Compliance | Yes |
| Communication Interfaces | USB, RS-232, 0–20 mV analog output |
| Power Supply | DC 9 V / 500 mA (center-positive) |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | (0–99999) ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Resolution | 0.001 |
| Temperature Range | (−20.0–135.0) °C |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Nitrate Ion Meter |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Resolution | 0.001 (pH), 0.01 mV |
| Temperature Range | −20.0 to 135.0 °C |
| Data Storage Capacity | 4096 sets |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Input Impedance | ≥3 × 10¹² Ω |
| Compliance | GLP-compliant |
| Connectivity | USB, RS-232, 0–20 mV analog output |
| Power Supply | DC 9 V, 500 mA (center-positive) |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0 to 135.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.2 °C ±1 digit |
| Input Impedance | ≥3 × 10¹² Ω |
| Data Storage Capacity | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Supported Units | pX, ppm, ppb, ppt, mol/L, mmol/L, µmol/L, nmol/L, %, µg/L, mg/L, g/L, ng/L |
| pH Range | −10.000 to 20.000 |
| pH Resolution | 0.001/0.01/0.1 (selectable) |
| pH Accuracy | ±0.002 pH ±1 digit |
| mV Range | −2000.00 to 2000.00 mV |
| mV Resolution | 0.01/0.1/1 mV (selectable) |
| mV Accuracy | ±0.02% FS ±1 digit |
| Interface | BNC electrode port, Pt1000 temperature input, USB, RS232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ Silver/Sulfide Ion Analyzer |
| Instrument Type | Benchtop |
| Ion Measurement Range | 0–99999 ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | −20.0–135.0 °C |
| Resolution | 0.001 pH / 0.01 mV / 0.1 °C |
| Input Impedance | ≥3×10¹² Ω |
| Data Storage | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), ≤5 points (pH) |
| Temperature Compensation | Automatic (ATC) or Manual |
| Communication Interfaces | USB, RS-232, 0–20 mV analog output |
| Brand | FangZhou |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PXJ-1C+ |
| Instrument Type | Benchtop |
| Ion Measurement Range | (0–99999) ppm |
| Detection Limit | 9999 ppm |
| Response Time | 3 s |
| Measurement Accuracy | ±0.5% FS ±1 digit |
| Temperature Range | (−20.0–135.0) °C |
| pH Resolution | 0.001 pH |
| mV Resolution | 0.01 mV |
| Input Impedance | ≥3×10¹² Ω |
| Data Storage Capacity | 4096 sets |
| GLP Compliance | Yes |
| Calibration Points | 2–9 points (ion), up to 5 points (pH) |
| Temperature Compensation | Automatic (ATC) or Manual |
| Communication Interfaces | USB, RS-232, 0–20 mV analog output |
| Brand | Chelsea |
|---|---|
| Origin | UK |
| Model | FastBallast |
| Detection Principle | Single-Turnover Active Fluorescence (STAF) |
| Measurement Range | 10–50 µm |
| Sensitivity | <1 cell/mL |
| Dynamic Range | 0–4000 cells/mL |
| Sample Volume | 20 mL |
| Analyzed Volume | 0.5 mL |
| Test Duration | <2 min (Level 1), <10 min (Level 2) |
| Dimensions | 273 × 246 × 122 mm |
| Weight | 4.5 kg |
| IP Rating (lid closed) | IP68 |
| Battery Life | 8 h continuous operation |
| Connectivity | Bluetooth / USB |
| Warranty | 1 year |
| Brand | 4DigitalBooks |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | FastOcean APD |
| Instrument Type | In Situ Algal Fluorometer |
| Measurement Principle | Fast Repetition Rate (FRR) Fluorescence |
| Excitation Wavelengths | 450 nm, 530 nm, 624 nm |
| Depth Rating | 600 m |
| Operating Voltage | 18–36 V DC |
| Power Consumption | 4.8 W (peak 5 W) |
| Battery Life | 6 hours continuous operation |
| Sampling Frequency | 10 Hz |
| Fluorescence Signal Range | Equivalent to Chl-a concentration 0.02–200 mg/m³ |
| LED Irradiance Units | photons·m⁻²·s⁻¹ × 10²² |
| Software Platform | FastPro8 v3.2+ |
| Compliance | CE, RoHS, IP68 submersible housing |
| Data Output | ASCII, CSV, NetCDF |
| Interface | RS-232/RS-485, optional Ethernet/WiFi module |
| Brand | FENK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Instrument Type | Benchtop Laboratory Analyzer |
| Model | CL-101 |
| Measurement Principle | Spectrophotometry (Absorption-based) |
| Wavelengths | 420 nm, 540 nm, 620 nm, 700 nm |
| Accuracy | ≤ ±5% (COD: ≤ ±8%) |
| Repeatability | ≤ 3% |
| Optical Stability | < ±0.001 ABS |
| Data Storage | 1,000 records |
| Display | 4.3-inch capacitive touchscreen LCD |
| Dimensions | 210 × 150 × 110 mm |
| Weight | 1.35 kg |
| Power Supply | DC 5 V / 2 A |
| Battery Capacity | 4800 mAh |
| Operating Environment | −10 to 40 °C, <80% RH (non-condensing) |
| Calibration Modes | Real-time calibration & formula-based calibration |
| Photometric Modes | Absorbance, Concentration, Transmittance |
| Cuvette Format | 16 mm round glass tubes |
| Compliance | Designed for ASTM D1252 (COD), ISO 7150-1 (NH₃-N), and EPA Method 350.1 (Ammonia) |