- All
- Favorite
- Popular
- Most rated
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MI40 |
| Control Interface | 5.7" touchscreen (bilingual: English/Chinese) |
| Load Application | Motor-driven force control up to 60 kg |
| Preload & Post-extrusion Force Control | Yes |
| Standard Weight Loading | ASTM-compliant砝码 set (1.200, 2.16, 3.8, 5.0, 10.0, 21.6 kg |
| Multi-load Testing | Up to 8 programmable weights |
| Barrel Rotation | 90° and 180° for loading/cleaning |
| Temperature Range | 60.00–400.00 °C (optional to 500.00 °C) |
| Die Dimensions | 2.095 ± 0.003 mm diameter, 8.00 ± 0.025 mm length |
| Die Material | Tungsten carbide |
| Piston Diameter | 9.48 ± 0.01 mm |
| Barrel ID | 9.555 ± 0.01 mm |
| Timing Resolution | < 0.001 s |
| Displacement Sensor | High-precision linear encoder |
| Cleaning Options | Rotating cleaning auger (optional), automated barrel cleaning module (optional) |
| Connectivity | Ethernet port for direct LIMS integration, dual USB ports (U-disk & printer) |
| Software Control | Single PC can manage up to four MI40 units |
| Compliance | ISO 1133, ASTM D1238 Method D, ASTM D3364 |
| Optional Modules | Auto-melt cutter, heated/unheated die plugs, nitrogen purge, die swell unit, semi-die, D-MELT melt extension rheology system, corrosion/wear-resistant barrels |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | FFU300 |
| Film Width | 300 mm |
| Die Width Options | 70, 120, 150, 220, 320, 420 mm |
| Chill Roll Diameter | 150 mm |
| Chill Roll Width | 220 / 320 / 420 mm |
| Web Speed | 0–50 m/min |
| Winding Tension Control Range | 0–50 N |
| Max. Wound Roll Diameter | 600 mm |
| Dimensions (H×W×D) | 1735 × 1965 × 660 mm |
| Weight | ~500 kg |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | BFU300 |
| Roll Width | 320 mm |
| Max Folded Film Diameter | 300 mm |
| Die Sizes | 30 / 50 / 60 mm |
| Overall Height | 2210–2710 mm |
| Winding Speed | 0.1–50 m/min |
| Max Winding Tension | 50 N |
| Electronic Tension Limit Setting | 50 N |
| Max Full Roll Diameter | 600 mm |
| Vertical Adjustment Range | 500 mm |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | X-Trude 300 |
| Torque | 300 N·m |
| Max. Screw Speed | 0–120 rpm |
| Power Output | 6 kW |
| Temperature Range | 0–350 °C (0.1 °C resolution) |
| Heating Zones | Up to 16 |
| Cooling Zones | 4 |
| Pressure Sensor Options | 0–100 / 0–200 / 0–500 / 0–1000 bar (±0.5% FS accuracy) |
| Screw Diameters | 20 mm, 25 mm, 30 mm (standard), custom options available |
| Dimensions (L×W×H) | 1300 × 530 × 1100 mm |
| Weight | 300 kg |
| Control Interface | Touchscreen + PC with ROSWIN software integration |
| Brand | Xplore (Netherlands) |
|---|---|
| Origin | Netherlands |
| Model | FL Fiber Spinning Line |
| Feedstock Consumption | < 5 g per test |
| Sample Production Time | < 5 min |
| Take-up Speed (High-Speed Unit) | 5–200 m/min |
| Winding Width | 10–150 mm (1 mm increments) |
| Traverse Pitch | 0.1–4.0 mm (0.1 mm increments) |
| Spinneret Diameter Options | 0.25–1.50 mm (0.25 mm increments) |
| Drawing Ratio Adjustable | 1:1 to 1:10 |
| Hot Shoe Temperature Range | Ambient to 300 °C (1 °C resolution) |
| Hot Shoe Length | 300 mm |
| Tension Control Range | ±250 N·mm (0.05 N·mm resolution) |
| Low-Speed Unit Speed | 0.5–90 m/min (0.01 m/min resolution) |
| Guiding Roll Diameter | 75 mm (both units) |
| Control Interface | Integrated industrial touchscreen with graphical HMI |
| Brand | Xplore |
|---|---|
| Origin | Netherlands |
| Model | MC 40 |
| Max Torque | 40 Nm (1–500 rpm) |
| Batch Capacity | 40 mL |
| Max Temperature | 425 °C |
| Heating Time (80 → 240 °C) | <15 min |
| Cooling Time (240 → 80 °C) | <10 min (water-cooled) |
| Screw Speed | 1–500 rpm |
| Max Melt Pressure | 250 bar |
| Barrel Material | DIN 1.4112 steel, 54 HRC, 2000 HV coating |
| Screw Coating | 1000 HV |
| Heating Zones | 7 thermocouples + 12 heater cartridges |
| Drive Power | 1350 W |
| Dimensions (H×W×D) | 95 × 50 × 27 cm |
| Weight | 150 kg |
| Control Interface | Integrated touchscreen or USB-connected PC software (Excel-exportable data) |
| Brand | Xplore Instruments BV |
|---|---|
| Origin | Netherlands |
| Model | Filament Screening Add-on for MC 15 HT / MC 40 Micro Compounders |
| Application | Lab-scale FFF (Fused Filament Fabrication) Filament Development |
| Compatibility | Integrates with Xplore MC 15 HT, MC 40, and retrofittable to legacy MC 15 micro-compounders |
| Die Options | 1.75 mm & 2.85 mm standard filament diameters |
| Line Speed Range | 0.1–10 m/min (adjustable via precision volumetric feeder) |
| Temperature-Controlled Die Head | Equipped with ±0.5 °C PID thermal regulation |
| Optional Accessories | Heated/cooled water bath, filament water separator, industrial spool winder |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MV |
| Torque Range | 200 ME |
| Temperature Range | 0–200.0 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Stability | < ±0.2 °C |
| Standard Rotor Speed | 2 rpm (optional: 0.1–5 rpm) |
| Rotor Diameter | 38.1 mm / 30.84 mm |
| Rotor Thickness | 5.54 mm |
| Chamber Diameter | 50.9 mm |
| Chamber Height | 59 mm |
| Closing Force | 11.5 kN |
| Opening Distance | 110 mm |
| Compressed Air Supply | 5–10 bar |
| Weight | ~150 kg |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | X-trude600 |
| Torque | 600 Nm |
| Screw Speed | 0–120 rpm |
| Power Output | 10 kW |
| Temperature Range | 60–350 °C (0.1 °C resolution) |
| Heating Zones | up to 16 |
| Cooling Zones | up to 4 |
| Pressure Sensor Options | 0–100 / 0–200 / 0–500 / 0–1000 bar (±0.5% full-scale error) |
| Screw Configurations | 20 mm, 1", 30 mm, dual 35 mm, and custom options |
| Dimensions (L×W×H) | 1370 × 530 × 1300 mm |
| Weight | 500 kg |
| Control Interface | Touchscreen + PC with ROSWIN software integration |
| Sample Feed Compatibility | Continuous gravimetric or volumetric feeder interfaces |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | ELASTOGRAPH |
| Oscillation Frequency | 50 rpm or 100 rpm (0.83 Hz or 1.67 Hz) |
| Oscillation Amplitude | ±0.5° (optional ±0.1° to ±4.0°) |
| Temperature Range | 5–230.0 °C (resolution: 0.01 °C) |
| Torque Range | 1×10⁻⁴–20 N·m (standard 5 N·m or optional 20 N·m) |
| Clamping Force | 12 kN |
| Pressure Capability | up to 20 kN (optional) |
| Compressed Air Requirement | 6–10 bar |
| Dimensions (W×H×D) | 540 × 980 × 410 mm |
| Weight | 150 kg |
| Compliance | ISO 6502, ASTM D5289, DIN 53529, GB/T 16584 |
| Brand | Xplore |
|---|---|
| Origin | Netherlands |
| Model | MC 15 HT |
| Batch Capacity | 15 mL (3–7 mL optional via Vari-Batch™) |
| Max Torque | 40 Nm (full speed range 1–500 rpm) |
| Max Temp | 450 °C |
| Temp Control | 8 heating zones, 7 thermocouples, melt thermocouple feedback |
| Torque & Rheological Data Acquisition | melt torque, shear viscosity, shear rate, shear stress |
| Max Pressure | 250 bar |
| Cooling Time (240→80 °C) | <10 min (water-cooled) |
| Weight | 145 kg |
| Dimensions (H×W×D) | 95×50×27 cm |
| Drive Power | 1350 W |
| Electrical Supply | 400 V / 50–60 Hz, 3-phase 5-wire, 16 A (or 210 V option) |
| Screw Hardness | 54 HRC, coating 1000 HV |
| Barrel Hardness | 64 HRC, coating 2000 HV |
| Chemical Resistance | pH 0–14 |
| Data Export | Excel (.xlsx) |
| Brand | Xplore |
|---|---|
| Origin | Netherlands |
| Model | IM12 |
| Maximum Shot Volume | 12 mL |
| Mold Cavity Capacity | Up to 12 mL (geometry-dependent) |
| Split Mold Design | Heatable/Coolable |
| Max Barrel Temperature | 450 °C |
| Max Mold Temperature | 300 °C |
| Cooling Integration | Compatible with External Coolants |
| Max Injection Force | 12 kN @ 10 bar (1200 bar system pressure), 18 kN @ 16 bar (1800 bar system pressure) |
| Nozzle Heating Time (20 → 240 °C) | < 8 min |
| Power Supply | 208–240 V AC, Custom Voltages Available |
| Data Interface | USB for Real-Time Process Logging |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MI-3 |
| Temperature Range | 60.00–400.00 °C (optional up to 500 °C) |
| Die Diameter | 2.095 ± 0.003 mm, Length: 8.00 ± 0.025 mm |
| Die Material | Tungsten Carbide |
| Piston Diameter | 9.48 ± 0.01 mm |
| Barrel ID | 9.555 ± 0.01 mm |
| Standard Weights | 1.200, 2.16, 3.8, 5.0, 10.0, 21.6 kg (±0.5 % tolerance) |
| Timer Resolution | < 0.001 s |
| MFR Range | 0.01 cm³/min to 2500 g/10 min (with die inserts) |
| Touchscreen | 5.7″ full-color capacitive display |
| Connectivity | Ethernet port for LIMS integration, dual USB ports |
| Compliance | ISO 1133, ASTM D1238 (Methods A, B, C) |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MI2 Series (MI2.1, MI2.2, MI2.3) |
| Standards Compliance | ISO 1133, ASTM D1238 (Methods A, B, C), ASTM D3364 |
| Cylinder Bore Diameter | 9.555 ± 0.010 mm |
| Piston Diameter | 9.474 ± 0.007 mm |
| Die Capillary | 2.095 ± 0.005 mm × 8.00 ± 0.025 mm (Tungsten Carbide) |
| Temperature Range | 60–400 °C |
| Temp. Stability | < ±0.1 °C (over time) |
| Temp. Accuracy | ±0.01 °C (60–320 °C), ±0.1 °C (320–400 °C) |
| Load Masses | 1.20, 2.16, 3.8, 5.0, 10.0, 21.6 kg (±0.5 % tolerance) |
| Timer Resolution | 0.001 s |
| Display | 5.7″ full-color touchscreen |
| Connectivity | Ethernet (LIMS-ready), dual USB ports |
| Multi-unit Control | Up to 4 units per PC |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MI40-AUTO |
| Compliance Standards | ISO 1133, ASTM D1238, ASTM D3364 |
| Automation Level | Fully automated with robotic sample handling, auto-loading, auto-cleaning |
| Measurement Types | Melt Volume Rate (MVR) and Melt Mass Rate (MFR) |
| Configuration | Modular, scalable platform supporting linear or circular instrument layouts |
| Target Materials | Thermoplastics, engineering resins, filled polymers, biopolymers |
| Software | Integrated control with audit trail, user access levels, and data export compliant with GLP/GMP requirements |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | MI-ROBO |
| Temperature Range | 60.00–400.00 °C (optional to 500.00 °C) |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.01 °C |
| Die Diameter | 2.095 ± 0.003 mm |
| Die Length | 8.00 ± 0.025 mm |
| Die Material | Tungsten Carbide |
| Piston Diameter | 9.48 ± 0.01 mm |
| Barrel ID | 9.555 ± 0.01 mm |
| Standard Weights | 1.200, 2.16, 3.8, 5.0, 10.0, 21.6 kg (±0.5 % tolerance) |
| Timer Resolution | < 0.001 s |
| Position Sensor Resolution | 0.012 mm/pulse |
| Test Capacity | Up to 30 consecutive tests |
| Display | 5.7" full-color LCD touchscreen |
| Software | MFR Professional with automated sequence programming, real-time monitoring, and GLP-compliant data export |
| Brand | Goettfert |
|---|---|
| Origin | Germany |
| Model | X-Trude 1400 |
| Torque | 1400 N·m |
| Max. Screw Speed | 0–120 rpm |
| Power Output | 17 kW |
| Screw Diameter | 45 mm |
| Temperature Range | 60–350 °C (0.1 °C resolution) |
| Heating Zones | 16 independent zones |
| Cooling Zones | 4 liquid-cooled zones |
| Pressure Sensor Options | 0–100 / 0–200 / 0–500 / 0–1000 bar (±0.5% FS accuracy) |
| Dimensions (L×W×H) | 1580 × 600 × 1300 mm |
| Weight | 800 kg |
| Control Interface | Touchscreen + PC via ROSWIN software |
| Brand | Goettfert |
|---|---|
| Country of Origin | Germany |
| Model | VISCO-ELASTOGRAPH |
| Temperature Range | 5–230 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Stability | < ±0.2 °C over time |
| Temp. Uniformity (across cavity) | < 0.5 °C |
| Oscillation Frequency | 0.01–100 Hz |
| Angular Amplitude | ±0.01°–±90° |
| Relaxation Angle Range | 0–90° |
| Angular Resolution | 0.001° |
| Max. Torque | 20 Nm |
| Max. Normal Force | 10 kN |
| Closing Force | 12 kN |
| Dimensions (H×W×D) | 1145 × 540 × 410 mm |
| Weight | 175 kg |
Show next