- All
- Favorite
- Popular
- Most rated
| Origin | Germany |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Behr Metal Guarded Heating Mantle |
| Pricing | Upon Request |
| KP1 | Ø90 mm, 500 W, 230 V |
| KP2 | Ø145 mm, 1100 W, 230 V |
| Weight (KP1) | ~1.2 kg |
| Weight (KP2) | ~1.3 kg |
| Brand | CHINYEE |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | L-Series |
| Pricing | Available Upon Request |
| Temperature Range | 30–3000 °C |
| Construction | Dual-layer stainless steel housing |
| Insulation | Vacuum-formed ceramic fiber modules (standard) |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Controller | Standard B170 digital PID (ramp/soak programming) |
| Air Management | Adjustable front air inlet, rear exhaust port (fan-cooled or catalytic exhaust options available) |
| Safety | Low external surface temperature, silent solid-state relays |
| Compliance | Designed to meet general laboratory safety standards per EN 61000-6-3 (EMC) and EN 61000-6-4 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr IRF10 |
| Price Range | USD 1,400 – 7,200 |
| Instrument Type | Box-Type Furnace |
| Maximum Temperature | 1150 °C |
| Temperature Control Accuracy | ±3 °C |
| Rated Power | 1.5 kW |
| Heating Rate (to 1000 °C) | ≤10 s |
| Heating Method | Elliptical Reflector Infrared Radiation with Gold-Coated Interior |
| Internal Chamber Dimensions | 350 × 325 × 410 mm |
| Quartz Tube Outer Diameter Options | 18–20 mm, 22–24 mm, 26–28 mm |
| Infrared Heating Zone Length | 200 mm |
| Communication Interface | RS-232 (D-Sub 9-pin female) |
| Cooling Method | Passive Heat-Pipe-Assisted Rapid Quenching |
| Gas Inlets | Dual Mass Flow Controlled (O₂ + inert gas) |
| Thermocouple | Type K (NiCr–Ni), Mounted on Outer Wall of Quartz Combustion Tube |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | N/L Series |
| Temperature Range | 30 °C to 1300 °C (standard), up to 3000 °C (custom configurations) |
| Heating Configuration | Triple-sided (N-type), Bottom-protected with SiC plates |
| Insulation | Multi-layer lightweight refractory bricks |
| Controller Options | B150, C250 (side-mounted), B170 (programmable PID), P320 (9 programs × 8 segments), C40 + dual C6Z (triple-zone, ≥750 mm length, ≤1300 °C) |
| Chamber Construction | Stainless steel housing, radiation-free heating elements wound on ceramic support tubes |
| Exhaust Port Location | Side (N31 and earlier), rear wall (N31/H onward) |
| Door Mechanism | Vertically downward-opening parallel-guided door |
| Optional Accessories | Integrated exhaust purification systems, data logging modules compliant with GLP/GMP audit trails |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr HB4 / HB6 Multi-Sample Heating Block |
| Pricing | Available Upon Request |
| Dimensions (W×H×L) | HB4 ≈ 53 × 74 × 32 cm |
| Weight | HB4 ≈ 15.1 kg |
| Rated Voltage | 230 V~, 50/60 Hz |
| Rated Power | HB4 = 1440 W |
| Independent Temperature Control per Position | Yes |
| Sample Port Diameter | 94 mm |
| Optional Support Stand | HBS-4 (for HB4), HBS-6 (for HB6) |
| Accessories Part Numbers | 80 48 00506 (HB4), 80 48 00507 (HB6), 80 48 00508 (HBS-4), 80 48 00509 (HBS-6) |
Show next