- All
- Favorite
- Popular
- Most rated
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr S5 |
| Price Range | USD 14,000 – 28,000 |
| Instrument Type | Kjeldahl Nitrogen Determinator |
| Distillation Time | 1–99 min |
| Repeatability | ≤0.5% CV (RSD ≤1%) |
| Recovery Rate | >99.5% |
| Power Consumption | 750–1500 W |
| Voltage | 115–230 V~, 50/60 Hz |
| Cooling Water Flow | ~5 L/min |
| Dimensions (W×H×D) | 410 × 675 × 410 mm |
| Weight | ~36 kg |
| Titration Interface | RS232 |
| Display | LCD |
| Preprogrammed Methods | 100 |
| Compatible with External Titrator | Yes |
| Brand | J.U.M. |
|---|---|
| Origin | Germany |
| Model | 3-200 |
| Detection Principle | Flame Ionization Detection (FID) |
| Operating Temperature | 190 °C (heated sample path & detector chamber) |
| Response Time | < 1 s |
| Fuel | Hydrogen (low-pressure metal-hydride cartridge, 40 h runtime) |
| Combustion Air | Integrated air generator (no external cylinder required) |
| Sample Filtration | 2 µm stainless steel filter (permanent or replaceable) |
| Filter Cleaning | Automated compressed air or nitrogen back-purge (measurement uninterrupted) |
| Compliance | EPA Method 25A, EN 12619, ISO 8573-1 (gas purity), GLP/GMP-ready data handling |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr InKjel Series (InKjel1210M, InKjel625P, InKjel1225M, InKjel450P, InKjel475M) |
| Digestion Time Range | 1–199 min |
| Repeatability | ±0.5% RSD |
| Nitrogen Recovery Rate | >99.5% |
| Power Input | 750–1500 W (adjustable 0–100% in 1% increments) |
| Voltage | 230 VAC / 115 VAC, 50/60 Hz |
| Dimensions (W × D × H) | ≈54 × 44 × 75 cm |
| Weight (incl. reaction tubes) | ≈20 kg |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Behr B10dN / B22dN / B45dN |
| Pure Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count / Endotoxins | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| Max. Operating Pressure | 8 bar |
| Housing Material | Polyamide (PA66-GF30) |
| Exchange Capacity (B10dN/B22dN/B45dN) | 1.2 / 2.4 / 5.5 kL @ 10 °dH hardness removal |
| Max. Flow Rate (L/h) | 300 / 500 / 800 |
| Overall Height (cm) | 68 / 112 / 125 |
| Housing Height (cm) | 55 / 98 / 110 |
| Brand | ELGA |
|---|---|
| Origin | United Kingdom |
| Model | DI/UV/UF/UVF |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.1 ppb |
| Total Organic Carbon (TOC) | 1–3 ppb |
| Microbial Count | <0.1 CFU/mL |
| Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <0.2 particles/mL |
| DNase | <0.02 pg/mL |
| RNase | <0.002 ng/mL |
| Brand | Mercury Instruments |
|---|---|
| Origin | Germany |
| Model | MC3000 |
| Instrument Type | Portable |
| Principle | Cold Vapor Atomic Absorption (CVAA) |
| Detection Limit | ≤1 ng/mL |
| Repeatability | ≤3% (CVAA method) |
| Linearity Error | 5% |
| Mercury Vapor Output Range | 15–500 µg/m³ Hg⁰ |
| Calibration Method | NIST-Recommended Mercury Saturated Vapor Pressure Technique |
| Stabilization Time | 30 min |
| Brand | DME |
|---|---|
| Origin | Denmark |
| Model | DS95Navi |
| Positioning Detection Noise | X-Y < 0.15 nm RMS, Z = 35 pm |
| Sample Dimensions | Diameter < 15 mm, Thickness < 5 mm |
| Sample Stage Travel Range | 180 nm × 180 nm |
| Brand | Savillex |
|---|---|
| Origin | USA |
| Model | HPX-200-1 |
| Heating Power | 230 V AC |
| Controller | Integrated digital controller |
| Max Operating Temperature | 240 °C |
| Temperature Uniformity | ±2 °C at 150 °C |
| Plate Dimensions | 47.5 cm × 40.4 cm × 14.8 cm |
| Heating Zone Dimensions | 415 mm × 212 mm |
| Display | LED digital display |
| Surface Material | Semiconductor-grade graphite core with full PFA (perfluoroalkoxy alkane) fluoropolymer coating |
| Edge Protection | Molded PTFE thermal guard ring |
| Certifications | TÜV-certified, CE-compliant, RoHS-conformant |
| Application Class | Trace-metal-clean sample digestion and evaporation |
| Brand | IMT |
|---|---|
| Origin | Germany |
| Model | VSP-4000 |
| Instrument Type | Dynamic Headspace Sampler |
| Automation Level | Fully Automatic |
| Sample Vial Heating Range | Ambient to 200 °C |
| Valve Oven Temperature Range | Ambient to 200 °C |
| Quantitative Loop Volume | 1 mL |
| Sample Capacity | 80 positions |
| Vial Format | 20 mL |
| Trap Configuration | Single Mikro-packed 1/16″ trap |
| Trap Cooling | Peltier-cooled cold trap at −35 °C |
| Detection Limit | ≤0.1 ppt (for selected VOCs) |
| Thermal Desorption Max Temp | Up to 280 °C (field-upgradable) |
| Optional Features | Internal Standard Addition Module, Split Flow up to 50 mL/min, Foam Sensor, Integrated Pressure & Mass Flow Control |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KEX Compact Soxhlet Extraction System |
| Pricing | Available Upon Request |
| Voltage | 230 VAC / 115 VAC |
| Frequency | 50/60 Hz |
| Current | 3 A / 6 A |
| Power Rating | 450 W |
| Weight | ~7.5 kg |
| Dimensions (W×D×H) | ~23 × 33 × 71.5 cm (KEX 30) / ~23 × 33 × 80 cm (KEX 100) |
| Extraction Vessel Capacity | 30–500 mL |
| Sample Throughput | 1 sample per unit (compact configuration) |
| Condenser Interface | Standard threaded joint (compatible with Weibull/Stoldt acid hydrolysis units) |
| Drain Valve | Integrated piston valve for post-extraction solvent transfer |
| Cooling Requirement | Compatible with UK 12/400 recirculating chiller (380 W) |
| Brand | CHINYEE |
|---|---|
| Origin | Japan |
| Model | NT-6100A |
| Compliance | USP <711>, <724>, <1092> |
| Apparatus Type | Paddle (App. 2) |
| Vessel Capacity | 900–1000 mL |
| Temperature Control Range | 30–45 °C (±0.2 °C stability) |
| Rotation Speed | 25–250 rpm (±1 rpm accuracy) |
| Number of Vessels | 6 |
| Interface | RS-232C, optional USB/Ethernet upgrade |
| Calibration Support | USP Calibrator Tablets (Prednisone, Salicylic Acid), mechanical verification tools included |
| Drive Architecture | Monolithic shaft coupling with one-touch bath cover release |
| Vessel Positioning | Centered alignment via precision-machined guide rails |
| Traceability | Individual serialized vessels, paddles, and shafts |
| Brand | J.U.M. |
|---|---|
| Origin | Germany |
| Model | AeroFid60 Aerosol Can Gas Leak Detection System |
| Category | Physical Property Testing Instruments — Other Physical Property Testing Instruments |
| Import Status | Imported |
| Brand | Savillex |
|---|---|
| Origin | USA |
| Model | 850-011-100706 |
| Material | Perfluoroalkoxy (PFA) |
| Configuration | Dual-channel nebulizer spray chamber assembly with detachable O-ring sealed end cap, integrated make-up gas port, 6 mm OD nebulizer inlet, PFA drain connector kit, quartz torch, PFA injection tube, support stand, and pre-cleaned components (pre-rinsed in high-purity HNO₃/HF) |
| Compliance | Compatible with Thermo Scientific Element 2 HR-ICP-MS and Neptune MC-ICP-MS platforms |
| Brand | Mercury Instruments |
|---|---|
| Origin | Germany |
| Model | 3000XS |
| Instrument Type | Portable |
| Measurement Principle | Cold Vapor Atomic Absorption Spectrometry (CVAAS) |
| Detection Limit | ≤0.1 µg/m³ |
| Repeatability | ≤1.0% |
| Linearity Error | ±1% |
| Wavelength | 253.7 nm |
| Light Source | Electrodeless Discharge Lamp (EDL) |
| Response Time (99% signal) | 1 s |
| Sensitivity | 0.1 µg/m³ (0.01 ppb) |
| Measurement Ranges | 0–100, 0–1000, 0–2000 µg/m³ |
| Data Logger Capacity | 10,000 readings |
| Power Supply | Rechargeable NiMH battery (6 h operation), 12 V DC input, 100–240 V AC (50/60 Hz) |
| Weight | ~5 kg (with battery) |
| Display | Backlit graphical LCD |
| Output Interfaces | USB, RS232, 4–20 mA analog output |
| Housing | Corrosion-resistant ABS with IP65-rated connectors |
| Pump | Maintenance-free diaphragm pump |
| Filter | Integrated particulate filter at probe inlet |
| Brand | Savillex |
|---|---|
| Origin | USA |
| Model | C-Flow |
| Flow Rates | 50 µL/min and 200 µL/min |
| Material | Perfluoroalkoxy (PFA) |
| Compliance | Compatible with Scott-type spray chambers (35 mm), O-ring-free design |
| Certification | Manufactured under ISO 9001-certified processes, compliant with ASTM D5673 and USP <232>/<233> for trace metal analysis |
| Origin | Germany |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Behr Metal Guarded Heating Mantle |
| Pricing | Upon Request |
| KP1 | Ø90 mm, 500 W, 230 V |
| KP2 | Ø145 mm, 1100 W, 230 V |
| Weight (KP1) | ~1.2 kg |
| Weight (KP2) | ~1.3 kg |
| Brand | Rocklabs |
|---|---|
| Origin | New Zealand |
| Product Type | Certified Reference Material (CRM) |
| Matrix Types | Oxide, Sulphide, Siliceous |
| Certified Elements | Pt (0.456–4.749 ppm), Pd (0.563–5.918 ppm), Au (0.0798–30.49 ppm), Ag (60.2–153.9 ppm) |
| Uncertainty | 95% confidence intervals reported for all certified values |
| Blank Levels | Au < 0.002 ppm |
| Packaging | 2.5 kg jars, 30 g & 50 g sachets (varies by material) |
| Certification | ISO/IEC 17034-accredited, recognized by IAG (International Association of Geoanalysts) |
| Brand | Savillex |
|---|---|
| Origin | USA |
| Model | DST-1000A |
| Instrument Type | Sub-boiling Distiller |
| Heating Method | Resistive Heating (Corrosion-Resistant Heater Sleeve) |
| Cooling Method | Natural Air Cooling |
| Distillation Rate | 1000 mL/24 h |
| Warm-up Time | 30 min |
| Endpoint Control | Manual |
| Heating Element | Corrosion-Resistant PFA-Encapsulated Heater Sleeve |
| Power Input | 70 W |
| Voltage Options | 100/115/230 VAC ±10%, 50/60 Hz |
| Dimensions (L×W×H) | 20 × 20 × 43 cm (excl. funnel) |
| Weight | 4.6 kg |
| Maximum Capacity | 1 L |
| Material of Wetted Parts | Injection-Molded PFA |
| Brand | Savillex |
|---|---|
| Origin | USA |
| Manufacturer Authorization Status | Authorized Distributor |
| Origin Category | Imported |
| Model No. | 850-011-100787 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Behr STI |
| Price Range | USD 14,000 – 28,000 |
| Instrument Type | Kjeldahl Nitrogen Analyzer System |
| Distillation Time | 1–99 minutes |
| Repeatability | ±0.5% RSD |
| Nitrogen Recovery Rate | >99.5% |
| Power Consumption | 750–1500 W |
| Input Voltage | 230 VAC / 115 VAC |
| Frequency | 50/60 Hz |
| Net Weight | ~3.5 kg |
| Dimensions (W × D × H) | ~33 × 20 × 60 cm |
| Brand | Mercury Instruments |
|---|---|
| Origin | Germany |
| Model | MMS-NG |
| Instrument Type | Online Analyzer |
| Measurement Principle | Cold Vapor Atomic Absorption Spectroscopy (CVAAS) |
| Detection Limit | ≤0.1 ng/m³ |
| Repeatability | ≤1.0% (CVAAS) |
| Linearity Error | ±1% (CVAAS) |
| Measurement Range | 0.001–50 µg/m³ (extendable to 2000 µg/m³ with integrated dilution system) |
| Wavelength | 253.7 nm |
| Sample Inlet Pressure | up to 240 bar (3480 psi) |
| Sampling Points | 2–16 via multiplexed valve manifold |
| Cycle Time | ~3 minutes per point |
| Calibration Method | Saturated mercury vapor generation (NIST-recommended vapor pressure equation) |
| Certifications | ATEX 2G IIC T4 EEx p, IECEx, ISO/DIS 6978-3, ASTM D5954, VDI 2267 Part 8, ISO 6978-1 |
| Brand | Mercury Instruments |
|---|---|
| Origin | Germany |
| Model | SM-4 Mobile |
| Measurement Principle | Thermal Catalytic Conversion + Gold Amalgamation Cold Vapor Atomic Fluorescence (CVAFS) |
| Detection Limit | 0.05 µg/m³ |
| Response Time (t₉₀) | ~180 s |
| Sample Line Length | Up to 73 m (240 ft) |
| Dilution Ratio | Adjustable, up to 1:100 |
| Compliance | EU EN 15267-3 certified, US EPA Performance Specification 12A (PS-12A) and RATA validated |
| Calibration Options | Automated Hg⁰ and Hg²⁺ gas generators (NIST-traceable), QAL3-compliant auto-validation module |
| Waste Generation | Zero liquid or solid waste |
| Operating Temperature Range | Probe heated to >180 °C |
| Filter | Heated particulate filter with automatic air-purge cleaning |
| Brand | ELGA |
|---|---|
| Origin | United Kingdom |
| Model | Quest / Quest UV |
| Purified Water Grade | ASTM Type I (Ultra-pure), Type II (Pure), Type III (RO) |
| Resistivity | 18.2 MΩ·cm at 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 5 ppb |
| Microbial Count | < 0.001 CFU/mL |
| Endotoxins | < 0.001 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| RO Feed Flow Rate | Up to 10 L/h |
| Dispense Flow Rate | Up to 1.2 L/min |
| Integrated Reservoir | 7 L (internal), optional external tanks: 15 L or 30 L |
| Dimensions (W × D × H) | 23.2 cm × 34 cm × 51 cm |
| Compliance | Meets ISO 3696:1987, ASTM D1193-06, CLSI EP21-A, and USP <1231> for purified water |
| Brand | Mercury Instruments |
|---|---|
| Origin | Germany |
| Model | 3000XS |
| Instrument Type | Portable |
| Measurement Principle | Cold Vapor Atomic Absorption Spectrometry (CVAAS) |
| Detection Limit | 0.1 µg/m³ |
| Repeatability | ≤3.0% |
| Linearity Error | ±10% |
| Measurement Ranges | 0–100 / 0–1000 / 0–2000 µg/m³ |
| Resolution | 0.1 µg/m³ |
| UV Source | Electrodeless Low-Pressure Mercury Lamp (253.7 nm) |
| Optical Cell | High-Purity Fused Silica |
| Pump Type | Maintenance-Free Diaphragm Pump |
| Battery Life | Up to 6 Hours |
| Data Logging | Integrated Recorder |
| Compliance | Designed for ISO 15202, ASTM D6784, and EPA Method 29–compliant field deployment |
Show next