- All
- Favorite
- Popular
- Most rated
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | UBM Series |
| Torque Range | 0.5–500 N·m |
| Test Temperature | Ambient to 1000 °C (with optional high-temperature furnace) |
| Compliance | DIN 50113 |
| Configuration | Compact desktop design |
| Load Type | Constant bending moment (static load applied, cyclic strain induced by rotation) |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | UBM |
| Torque Range | 0.1–500 N·m |
| Drive | 2-phase AC motor |
| Max Speed | 6000 rpm (optional) |
| Bearing System | Adjustable spherical bearings for axial & radial guidance |
| Clamping Systems | ER25 (1–16 mm), ER32 (1–20 mm), F48 (1–42 mm / 2–30 mm / 2–36 mm) |
| High-Temperature Furnace Compatibility | STE5 series, 100–1000 °C, with X/Y-adjustable furnace support and triple-zone digital LRA controller |
| Power Supply | 380/400 V, 3-phase + N + E, 0.75 kW (2 kW with furnace) |
| Safety Compliance | Low-voltage heating elements (<25 V), VDE-certified control cabinet, EN/IEC 61000-6-2/-4 EMC compliance |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT-R |
| Sensor Input | Full-bridge strain gauge (350 Ω, optional other resistances), 4 VDC excitation |
| Strain Range | ±500 με (full-bridge, 4-arm, torsion or bending) |
| Resolution | 14-bit |
| Frequency Response | DC to 1000 Hz (–3 dB) |
| Operating Environment | –40 °C to +85 °C, 0–90% RH (non-condensing) |
| Power Supply | 11–16 VDC, nominal 0.5 A, max 2 A (AC option available) |
| Output Signals | Four isolated 4–20 mA analog outputs (torque, speed, power, direction) |
| Telemetry Architecture | Non-contact inductive power coupling and digital RF data transmission |
| Mechanical Configuration | Rotating torque ring (integrated transmitter) + stationary power ring & master control unit |
| Size Series | Outer diameters increment in 2-inch steps for scalable shaft diameter coverage |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFM-T |
| Torque Range | 20–500 N·m |
| Application | High-force torsional characterization of structural components and fasteners |
| Brand | Binsfeld |
|---|---|
| Country of Origin | USA |
| Model | TT-10K |
| Max Torque Capacity | 10,000 N·m |
| Torque Measurement Range | 0–10,000 N·m |
| Torque Resolution | 1% of full scale |
| Torsional Angle Range | 0–360° |
| Motor Power Rating | 1 kW |
| Operating Temperature | −30 °C to +85 °C |
| RF Frequency Band | 902–925 MHz (16 programmable channels) |
| Transmission Distance | Up to 6 m (20 ft) |
| Sampling Bandwidth | DC to 500 Hz (−3 dB) |
| ADC Resolution | 14-bit |
| Transmitter Power Supply | 7.5–18 VDC, max 50 mA @ 350 Ω bridge |
| Battery Life | 24 h (9 V Li battery, 25 °C, 350 Ω bridge) |
| Centrifugal Acceleration Tolerance | 3000 g |
| Output Options | ±10 VDC analog (field-adjustable), RS-232 digital |
| Remote Control Range | 3 m (10 ft) |
Show next