- All
- Favorite
- Popular
- Most rated
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFV-HH |
| Test Force Capacity | 30,000 kN |
| Frequency Range | 0.01–100 Hz |
| Machine Weight | 50 metric tons |
| Instrument Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Compliance | ISO 9001:2000, ISO/IEC 17025, Swiss TS Certification, MLA-Accredited Calibration Laboratory |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | PH |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy | 750 J |
| Impact Velocity | 5.4 m/s |
| Pendulum Torque (Impact Constant) | 241.1543 N·m |
| Force Sensor Range | 800 mm |
| Maximum Lifting Height | 50 mm |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | AJET |
| Instrument Type | High-Temperature Tribological Tester |
| Max Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Max Operating Temperature | 1000 °C |
| Erosion Velocity Range | 30–150 m/s |
| Abrasive Feed Rate | 1–5 g/min (nominal 200-mesh Al₂O₃) |
| Impact Angles | 15°, 30°, 45°, 60°, 75°, 90° (customizable with upgraded fixture) |
| Nozzle Orifice Diameter | 1.5 mm (optional 2–3 mm for ≥800 °C operation) |
| Specimen Dimensions | 25 × 25 × 5 mm (custom sizes available) |
| Abrasive Hopper Capacity | 2 L |
| Origin | Hong Kong |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Production | Yes |
| Model | HFRR |
| Price Range | USD 140,000 – 210,000 |
| Instrument Category | High-Precision Tribological Tester |
| Max Friction Force | ±40 N |
| Friction Force Resolution | 0.1 mN |
| Max Test Temperature | 75 °C |
| Oscillation Frequency Range | 10–60 Hz |
| Humidity Control Range | 5–85% RH (adjustable in software) |
| Compliance | ASTM D6079, ISO 12156-1, EN 590 Annex D |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SJET |
| Instrument Type | High-Temperature Tribological Tester |
| Maximum Friction Force | 2000 N |
| Friction Force Resolution | 0.1 mN |
| Maximum Operating Temperature | 1000 °C |
| Jet Velocity | 10–50 m/s |
| Jet Diameter | 4 mm (fixed) |
| Maximum Erosion Flux | 100–2000 cc/min |
| Impact Angle | 15–90° (adjustable in 15° increments) |
| Specimen Dimensions | 25 × 25 × 4.8 mm (custom sizes available) |
| Sample Chamber Volume | 150 × 150 × 150 mm |
| Nozzle-to-Specimen Distance | 50 mm |
| Water Tank Capacity | 1200 L |
| Slurry Tank Capacity | 60 L |
| Closed-Loop Slurry Recirculation System | Yes |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | UBM Series |
| Torque Range | 0.5–500 N·m |
| Test Temperature | Ambient to 1000 °C (with optional high-temperature furnace) |
| Compliance | DIN 50113 |
| Configuration | Compact desktop design |
| Load Type | Constant bending moment (static load applied, cyclic strain induced by rotation) |
| Brand | Ducom |
|---|---|
| Origin | USA |
| Model | TR-20-HTVT |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Temperature | 800 °C |
| Operating Environment | High Vacuum (down to 10⁻⁷ mbar) or Controlled Atmosphere (inert gas, humidified air) |
| Sliding Modes | Unidirectional (CW/CCW), Bidirectional (angular oscillation), Spiral/Programmable Wear Tracks |
| Load Control | Programmable (constant, ramp, stepped) |
| Rotational Speed Range | 0.1–2000 rpm |
| Wear Track Diameter | 15–70 mm |
| Sample Geometry | Pin/Ball (Ø3–10 mm) vs. Rotating Disk (Ø100 mm) |
| Temperature Control Resolution | ±1 °C |
| Displacement Resolution | 0.1 µm |
| Angular Oscillation Frequency | 0.1–5 Hz |
| Stroke Angle Range | 0–10° |
| Brand | JHT (Yi Cheng Heng Da) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | TIMKEN OK |
| Price Range | USD 70,000 – 140,000 |
| Instrument Type | Boundary Lubrication Load Capacity Tester |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Test Temperature | 1000 °C |
| Standards Compliance | ASTM D2509, ASTM D2782, IP 240, IP 326, JIS K2220, JIS K2519 |
| Brand | JHT |
|---|---|
| Origin | USA |
| Model | ASTM D6079 |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Operating Temperature | 1000 °C |
| Compliance | ASTM D6079 |
| Control System | WinDucom 2010 Software |
| Data Output Format | ASCII-compliant |
| Sample Configuration | Ball-on-Disc (Oscillating Ball vs. Immersed Stationary Disc) |
| Optional Modules | High-Temperature Extension, Humidity Control, Electrical Contact Resistance (ECR) Measurement, Integrated Optical Microscopy Interface |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | UBM |
| Torque Range | 0.1–500 N·m |
| Drive | 2-phase AC motor |
| Max Speed | 6000 rpm (optional) |
| Bearing System | Adjustable spherical bearings for axial & radial guidance |
| Clamping Systems | ER25 (1–16 mm), ER32 (1–20 mm), F48 (1–42 mm / 2–30 mm / 2–36 mm) |
| High-Temperature Furnace Compatibility | STE5 series, 100–1000 °C, with X/Y-adjustable furnace support and triple-zone digital LRA controller |
| Power Supply | 380/400 V, 3-phase + N + E, 0.75 kW (2 kW with furnace) |
| Safety Compliance | Low-voltage heating elements (<25 V), VDE-certified control cabinet, EN/IEC 61000-6-2/-4 EMC compliance |
| Brand | JHT |
|---|---|
| Origin | USA |
| Model | TR 22 |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Test Temperature | 200 °C |
| Speed Range | 100–500 rpm |
| Load Range | 0–4500 lbf |
| Torque Range | 0–100 in-lb |
| Test Duration | 0–999.9 min |
| Power Supply | 230 V / 1 Ph / 50–60 Hz / 2 kVA |
| Compliance | ASTM D 5620, D 2625, D 2670, D 3233, IP 241, FTM 791-3807.1, FTM 791-3812.1 |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFM |
| Type | Electromechanical Universal Testing Machine |
| Force Range | 1–600 kN (configurable by sub-series: LFM-L: 1–20 kN |
| LFM | 10–125 kN |
| LFM-H | 150–600 kN) |
| Construction | Desktop (LFM-L) / Floor-standing (LFM & LFM-H) |
| Drive System | High-response AC brushless servo motor with high starting torque |
| Guidance | Precision-ground preloaded ball screws, zero-backlash transmission, heavy-duty column guidance with beam alignment calibration |
| Test Modes | Tension, Compression, Bending, Peel, Shear, and Zero-Crossing (Load Reversal) Testing |
| Noise Level | Low (<65 dB(A)) |
| Compliance | Designed for ASTM E4, E8, E9, E21, ISO 6892-1, ISO 7500-1, ISO 178, ISO 527, EN 10002-1, and GB/T 228.1 |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFV-L |
| Maximum Test Force | 6000 kN |
| Frequency Range | up to 5000 Hz |
| Machine Weight | 268 kg |
| Type | Electromechanical-Hydraulic Hybrid Fatigue Testing System |
| Import Status | Imported |
| Category | High-Force Dynamic Fatigue Testing Machine |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFV-E |
| Maximum Test Force | 600 kN |
| Frequency Range | up to 5000 Hz |
| Host Weight | 380 kg |
| Type | Electromechanical Resonant Fatigue Tester |
| Drive System | Servo-Electric, Upper Crosshead-Mounted |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | TTM/LF/LFSV |
| Load Capacity Range | 50 kN to 3000 kN |
| Type | Electro-Hydraulic Servo-Controlled Universal Testing Machine |
| Structural Configurations | 2-Column (TTM <600 kN), 4-Column (TTM ≥600 kN), Floor-Mounted Actuator (LF & LFSV) |
| Control Architecture | Closed-Loop Servo Hydraulic with Digital Controller or PC-Based Software Package |
| Compliance | Designed for ASTM E4, E8, E9, E21, ISO 6892-1, ISO 7500-1, EN 10002-1, and ISO 15630-1 testing protocols |
| Brand | RUMUL |
|---|---|
| Model | TESTRONIC |
| Origin | Switzerland |
| Type | Electromagnetic Resonant Fatigue Tester |
| Max Dynamic Load | ±250 kN |
| Static Load Capacity | 250 kN |
| Frequency Range | 40–300 Hz (8 discrete steps) |
| Frequency Control Accuracy | ±0.01 Hz |
| Dynamic Load Accuracy | ±0.5% |
| Static Load Accuracy | ±0.5% |
| Displacement Measurement Accuracy | ≤0.5% of reading |
| Vertical Test Space | >500 mm |
| Crosshead Travel | ≥300 mm |
| Test Table Dimensions | 690 × 840 mm with M16 T-slots |
| Resonance Damping | Optimized lateral elastic suspension |
| Compliance | ISO 7500-1 Class 1, ASTM E4, ASTM E647, DIN 969, ISO 3800 |
| Brand | JHT (Yi Cheng Heng Da) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TR 22 |
| Price | Upon Request |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFV |
| Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Force | 2000 kN |
| Frequency Range | 0.01 Hz – 300 Hz |
| Host Weight | 3000 kg |
| Stroke Options | ±50 mm, ±75 mm, or ±125 mm |
| Frame Stiffness | 50 kN/mm |
| Horizontal Clearance (between columns) | 440 mm |
| T-Slot Length | 600 mm |
| Hydraulic Power Unit Flow Rate | 5.5 L/min |
| Cooling Method | Air or Water Cooling |
| Electrical Supply | 400 V / 50 Hz / 4 kW |
| Control Modes | Closed-Loop Force, Displacement, and Strain (with extensometer) |
| Accuracy Class | 0.5, compliant with ISO 7500-1 and EN 10002-2 |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Type | Electro-Hydraulic Servo Universal Testing Machine |
| Model | LFM/V |
| Control System | Digital Controller + DION Materials Testing Software Suite |
| Drive Compatibility | Hydraulic & Electromechanical Actuation Platforms |
| Sensor Interface | Upgradable to ISO 17025-Traceable Load & Displacement Transducers |
| Compliance Framework | ASTM E4, ASTM E8, ISO 6892-1, ISO 7500-1, EN 10002-1 |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT-R |
| Sensor Input | Full-bridge strain gauge (350 Ω, optional other resistances), 4 VDC excitation |
| Strain Range | ±500 με (full-bridge, 4-arm, torsion or bending) |
| Resolution | 14-bit |
| Frequency Response | DC to 1000 Hz (–3 dB) |
| Operating Environment | –40 °C to +85 °C, 0–90% RH (non-condensing) |
| Power Supply | 11–16 VDC, nominal 0.5 A, max 2 A (AC option available) |
| Output Signals | Four isolated 4–20 mA analog outputs (torque, speed, power, direction) |
| Telemetry Architecture | Non-contact inductive power coupling and digital RF data transmission |
| Mechanical Configuration | Rotating torque ring (integrated transmitter) + stationary power ring & master control unit |
| Size Series | Outer diameters increment in 2-inch steps for scalable shaft diameter coverage |
| Brand | W+B |
|---|---|
| Origin | Switzerland |
| Model | LFM-T |
| Torque Range | 20–500 N·m |
| Application | High-force torsional characterization of structural components and fasteners |
| Brand | JHT |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Instrument |
| Model | TR-30 |
| Price Range | USD 70,000 – 140,000 |
| Instrument Type | Multi-Function Four-Ball Tribometer |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Test Temperature | 1000 °C |
| Compliance | ASTM D2266, D2596, D2783, D4172, D5183 |
| Brand | JHT (Yi Cheng Heng Da) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Slurry Jet |
| Pricing | Available Upon Request |
| Brand | Binsfeld |
|---|---|
| Country of Origin | USA |
| Model | TT-10K |
| Max Torque Capacity | 10,000 N·m |
| Torque Measurement Range | 0–10,000 N·m |
| Torque Resolution | 1% of full scale |
| Torsional Angle Range | 0–360° |
| Motor Power Rating | 1 kW |
| Operating Temperature | −30 °C to +85 °C |
| RF Frequency Band | 902–925 MHz (16 programmable channels) |
| Transmission Distance | Up to 6 m (20 ft) |
| Sampling Bandwidth | DC to 500 Hz (−3 dB) |
| ADC Resolution | 14-bit |
| Transmitter Power Supply | 7.5–18 VDC, max 50 mA @ 350 Ω bridge |
| Battery Life | 24 h (9 V Li battery, 25 °C, 350 Ω bridge) |
| Centrifugal Acceleration Tolerance | 3000 g |
| Output Options | ±10 VDC analog (field-adjustable), RS-232 digital |
| Remote Control Range | 3 m (10 ft) |
Show next