BioCool
Filter
Showing 1–30 of 113 results
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BIOCOOL-ES |
| Instrument Type | Stoppering Freeze Dryer |
| Application Scope | Pilot-Scale |
| Lyophilization Area | 1 m² |
| Ultimate Vacuum | ≤1 Pa |
| Condensate Capacity (24 h) | 15 L |
| Cold Trap Temperature | < −110 °C (enhanced mode down to −165 °C) |
| Dimensions (W×D×H) | 760 × 1440 × 1900 mm |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-1 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to –80 °C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Ultimate Vacuum | <10 Pa |
| Rotational Speed | 400–1800 rpm (variable frequency drive) |
| Chamber & Rotor Coating | PTFE (Teflon®) |
| Control Interface | 7-inch Industrial Touchscreen + PLC |
| Safety Features | Vacuum-delayed spin initiation, Auto Venting, Overheat/Overpressure/Imbalance Protection |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-1E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to –80 °C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Vacuum Limit | <10 Pa |
| Rotational Speed Range | 400–1800 rpm (optional) |
| Chamber & Rotor Coating | PTFE (Teflon®) |
| Control Interface | 7-inch Industrial Touchscreen + PLC |
| Safety Features | Vacuum Delay Start, Auto Venting, Over-Temp & Over-Speed Protection |
| Compliance | GMP-Compatible Design, FDA 21 CFR Part 11–Ready Software Architecture (with optional audit trail module) |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-2 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum System | Compatible with diaphragm or direct-coupled rotary vane pumps |
| Display | Touchscreen interface |
| Control Architecture | PLC-based automation |
| Safety Features | Auto-vacuum release, magnetic drive seal, ice crystal prevention logic (vacuum initiation only after target speed achieved) |
| Chamber & Rotor Coating | PTFE (Teflon®)-coated for chemical resistance and sterilizability |
| Rotors | Up to 50 rotor types auto-recognized |
| Optional Modules | Ultra-low temperature condenser (< −110°C), cryogenic thermostat (−4°C to +4°C), endpoint detection, vacuum oil mist filter, and process optimization support |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-3 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump | Direct-coupled rotary vane pump |
| Display | Touchscreen interface |
| Control Mode | Multi-stage programmable (12 segments) |
| Rotor Recognition | Auto-identification for up to 50 rotor types |
| Chamber & Rotor Coating | PTFE (Teflon®)-coated |
| Cold Trap Compatibility | Optional ultra-low temperature condenser (< −110°C) |
| Safety Features | Vacuum interlock (vacuum applied only after target speed reached), automatic venting, overload/overheat protection |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-3E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Source | Direct-coupled rotary vane pump |
| Display | LED panel |
| Control Mode | Single-stage programmable |
| Auto Venting | Yes |
| Cold Trap Compatibility | Optional (−50°C / −80°C / <−110°C) |
| Rotor Coating | PTFE (Teflon®) |
| Safety Features | Vacuum interlock, overtemperature protection, rotor imbalance detection, automatic vacuum release |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-4 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Cold Trap Compatibility | Optional −50°C / −80°C / <−110°C cryo-traps |
| Safety Features | Vacuum-delayed spin-up, Auto venting, Magnetic drive seal, Corrosion-resistant PTFE-coated chamber & rotors |
| Control Interface | Industrial touchscreen + PLC |
| Programmability | 12-step customizable protocol per run (speed, temp, vacuum, time) |
| Rotor Recognition | Supports ~50 rotor types |
| Mobile Monitoring | Remote status tracking via smartphone app |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-4E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Control Interface | Industrial Touchscreen + PLC |
| Programmability | 12-Stage Customizable Protocol |
| Safety Features | Vacuum Delay Start, Auto Venting, Over-Temp & Over-Pressure Protection |
| Cold Trap Compatibility | Optional –55°C, –80°C, or <–110°C Ultra-Low-Temperature Condenser |
| Rotor Recognition | Up to 50 Rotor Types Auto-Detected |
| Chamber & Rotor Coating | PTFE (Teflon®) Anti-Corrosion Finish |
| Rotational Speed Range | 400–1800 rpm (Variable Frequency Drive) |
| Ultimate Vacuum | <10 Pa |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Shanghai, China |
| Model | FD-1 |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory Use |
| Lyophilization Area | 0.06 m² |
| Ultimate Vacuum | < 20 Pa |
| Condenser Temperature | ≤ −50 °C |
| Water Capture Capacity | 2 kg/24 h |
| Dimensions (W×D×H) | 492 × 540 × 800 mm |
| Power Supply | 220 V, 50 Hz |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1A-110+ |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Freeze-Drying Area | 0.12 m² |
| Ultimate Vacuum | <3 Pa |
| Condenser Temperature (No-Load) | −110 °C |
| Water Capture Capacity (24 h) | 3 L |
| Refrigeration Compressor | Imported Industrial-Grade Unit |
| Control System | PLC + Touchscreen Interface |
| Sample Temperature Monitoring | Dual PT100 Sensors |
| Optional Features | Pulse Backfill Valve (N₂/Inert Gas), Auto-Defrost, Lyophilization Curve Logging & USB Data Export, Cold Trap Pre-Freezing Function |
| Structural Design | Monolithic Drying Chamber (Welded, Leak-Proof) |
| Condenser Technology | Deep-Cold Trap with Organic Solvent Compatibility (≤95% v/v Volatile Organics) |
| Brand | BIOCOOL |
|---|---|
| Model | FD-1A-80 |
| Cold Trap Temperature | < −80 °C |
| Ultimate Vacuum | < 20 Pa |
| Shelf Area | 0.12 m² |
| Sample Capacity (Liquid) | 1.2 L |
| Shelf Configuration | 4 × Φ200 mm Stainless Steel Trays |
| Cold Trap Dimensions | Φ200 × 200 mm |
| Ice Capacity | 4 kg/24 h |
| Power Supply | 220 V, 50 Hz, 1300 W |
| Overall Dimensions (W×D×H) | 492 × 540 × 800 mm |
| Refrigeration System | Dual-stage Cascade Compressor |
| Chamber Type | Transparent Acrylic Bell Jar |
| Vacuum Interface | Standard ISO-KF 25 |
| Optional | Sample Temperature Monitoring |
| Brand | BioCool |
|---|---|
| Origin | Beijing, China |
| Model | FD-1B-110+ |
| Instrument Type | Stoppering Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.08 m² |
| Ultimate Vacuum | <3 Pa |
| Condenser Temperature (No Load) | -110°C |
| Water Capture Capacity (24 h) | 3 L |
| Refrigeration Compressor | Imported Industrial-Grade Unit |
| Control System | PLC + Touchscreen Interface |
| Sample Temperature Monitoring | Dual Pt100 Sensors |
| Reconstitution Gas Inlet | Pulse-Controlled Inert Gas Backfilling (N₂ or Argon) |
| Compliance | Designed for GLP-compliant workflows |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FD-1B-50 |
| Instrument Type | Manifold-Style with Stoppering Capability |
| Application Scope | Laboratory-Scale Lyophilization |
| Shelf Area | 0.08 m² |
| Ultimate Vacuum | <13 Pa |
| Condenser Temperature | ≤ −50 °C |
| Water Capture Capacity | 3 L/24 h |
| Condenser Dimensions | Φ220 × 130 mm |
| Tray Size | Φ180 mm (3-layer stackable) |
| Power Supply | 220 V, 50 Hz, 850 W |
| Unit Dimensions (W×D×H) | 380 × 600 × 345 mm |
| Bottle Capacity | ~155 × 22 mm vials |
| Optional Features | Sample Temperature Monitoring, Inert Gas Backfill Valve (N₂/Ar) |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1B-80 |
| Condenser Temperature | < −80 °C |
| Ultimate Vacuum | < 20 Pa |
| Freeze-Drying Area | 0.07 m² |
| Load Capacity (Bulk) | 0.7 L |
| Ice Trapping Capacity | 4 kg/24 h |
| Tray Dimensions | Φ180 mm × 3 layers |
| Power Supply | 220 V, 50 Hz, 800 W |
| Dimensions (W×D×H) | 492 × 540 × 800 mm |
| Refrigeration System | Dual-stage cascade refrigeration with imported hermetic compressors |
| Chamber | Transparent polymethyl methacrylate (PMMA) bell jar |
| Vacuum Interface | Standard KF-25 flange |
| Display | Digital temperature & vacuum readout |
| Optional | Sample temperature probe interface |
| Brand | BIOCOOL |
|---|---|
| Origin | Shanghai, China |
| Model | FD-1C-50 / FD-1C-80 |
| Instrument Type | Manifold-type freeze dryer |
| Application Scale | Pilot-scale |
| Freeze-drying Area | 0.12 m² |
| Ultimate Vacuum | < 20 Pa |
| Condenser Temperature | −50 °C (FD-1C-50) / −80 °C (FD-1C-80) |
| Water Capture Capacity | 3 kg/24 h |
| Condenser Dimensions | Ø200 mm × 4 trays |
| Power Supply | 220 V, 50 Hz, 800–850 W |
| Main Unit Dimensions (W×D×H) | 380×300×645 mm (FD-1C-50) / 500×500×750 mm (FD-1C-80) |
| Standard Configuration | Benchtop主机, 2 L domestic vacuum pump, manifold drying assembly, 8 rubber stopcock valves, 8 glass freeze-drying flasks, stainless steel sample shelf |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1C-50 |
| Instrument Type | Manifold (Multi-Port) Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.12 m² |
| Ultimate Vacuum | < 20 Pa |
| Condenser Temperature | ≤ −50 °C |
| Water Capture Capacity | 3 L/24 h |
| Condenser Dimensions | Φ220 × 130 mm |
| Sample Tray | Φ200 mm, 4-layer |
| Manifold Ports | 8 independent vacuum-controlled ports |
| Power Supply | 220 V, 50 Hz, 850 W |
| Dimensions (W×D×H) | 350 × 600 × 345 mm |
| Weight | Approx. 42 kg |
| Compliance | Designed for GLP-compliant laboratory environments |
| Software Interface | Digital vacuum & temperature display |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1C-50+ |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Freeze-Drying Area | 0.12 m² |
| Ultimate Vacuum | <9 Pa |
| Condenser Temperature (No Load) | −55 °C |
| Condensate Capacity (24 h) | 3 L |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1C-80 |
| Condenser Temperature | < −80 °C |
| Ultimate Vacuum | < 20 Pa |
| Freeze-Drying Area | 0.12 m² |
| Shelf Capacity | 4 × Φ200 mm Trays |
| Tray Loading Volume | 1.2 L |
| Condenser Dimensions | Φ200 × 200 mm |
| Ice Capacity | 4 kg/24 h |
| Drying Time (10 mm layer) | ~24 h |
| Flask Compatibility | 8 × (100/250/500/1000 mL) |
| Power Supply | 220 V, 50 Hz, 1300 W |
| Unit Dimensions | 492 × 540 × 800 mm (W × D × H) |
| Refrigeration System | Dual-stage cascade compressor (imported hermetic compressors) |
| Chamber Material | Transparent acrylic bell jar |
| Condenser Material | Electropolished stainless steel (coil-free design) |
| Vacuum Interface | Standard KF-25 (ISO-K) |
| Optional | Sample temperature probe |
| Brand | BioCool |
|---|---|
| Origin | Beijing, China |
| Model | FD-1D-110+ |
| Instrument Type | Stoppering Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.08 m² |
| Ultimate Vacuum | <3 Pa |
| Condenser Temperature (No Load) | -110°C |
| Water Capture Capacity (24 h) | 3 L |
| Refrigeration System | Dual-Stage Cascade Compressor |
| Control System | PLC + Touchscreen Interface |
| Sample Temperature Monitoring | Dual Pt100 Sensors |
| Optional Features | Pulse Backfill Valve (N₂/Inert Gas), Auto-Defrost, Lyophilization Curve Logging & USB Data Export |
| Brand | BIOCOOL |
|---|---|
| Origin | Shanghai, China |
| Model | FD-1D-50 |
| Instrument Type | Stoppering Manifold Freeze Dryer |
| Application Scope | Pilot-Scale |
| Freeze-Drying Area | 0.12 m² |
| Ultimate Vacuum | ≤20 Pa |
| Condensate Capacity (24h) | 3 kg/24h |
| Cold Trap Temperature | −50 °C (FD-1D-50) / −80 °C (FD-1D-80) |
| Dimensions (W×D×H) | 380×600×345 mm (FD-1D-50) / 500×500×750 mm (FD-1D-80) |
| Power Supply | 220 V, 50 Hz, 800–850 W |
| Sample Shelf | Φ180 mm × 3 layers |
| Manifold Ports | 8 standard KF-16 ports |
| Optional | Sample Temperature Monitoring |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1D-50 |
| Instrument Type | Manifold (Multi-Port) Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.08 m² |
| Ultimate Vacuum | <13 Pa |
| Condenser Temperature | ≤−50 °C |
| Water Capture Capacity | 3 L/24 h |
| Power Supply | 220 V, 50 Hz, 850 W |
| Dimensions (W×D×H) | 380 × 600 × 345 mm |
| Condenser Chamber | Ø220 × 130 mm |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FD-1D-50+ |
| Instrument Type | Stoppering Freeze Dryer |
| Application Scope | Laboratory Use |
| Lyophilization Area | 0.08 m² |
| Ultimate Vacuum | <9 Pa |
| Condensate Capacity (24 h) | 3 L |
| Cold Trap Temperature | −55 °C |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1D-80 |
| Condenser Temperature | < −80 °C |
| Ultimate Vacuum | < 20 Pa |
| Freeze-Drying Area | 0.07 m² |
| Shelf Capacity | 0.7 L (3 × Φ180 mm trays) |
| Condenser Dimensions | Φ200 × 200 mm |
| Ice Capacity | 4 kg/24 h |
| Drying Time | ~24 h (10 mm sample thickness) |
| Vacuum Chamber | Transparent acrylic bell jar |
| Vacuum Interface | Standard KF-25 |
| Power Supply | 220 V, 50 Hz, 1300 W |
| Dimensions (W×D×H) | 492 × 540 × 800 mm |
| Optional | Sample Temperature Monitoring |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | FD-1E-110+ |
| Instrument Type | Manifold Freeze Dryer |
| Application Scope | Laboratory Use |
| Ultimate Vacuum | <3 Pa |
| Condenser Capacity (24 h) | 3 L |
| Condenser Temperature | −110 °C |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | FD-1E-80+ |
| Instrument Type | Manifold Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.12 m² |
| Ultimate Vacuum | <9 Pa |
| Condenser Temperature (No Load) | −85 °C |
| Condensate Capacity (24 h) | 4 L |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | BIOCOOL Freeze Drying Technology Research Center – Custom Process Development Service |
| Pricing | Upon Request |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JT-100–10000 |
| Price | USD 24,500 (FOB Beijing) |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Lab Serials OEM |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application Scope | Laboratory Use |
| Lyophilization Area | 0.1–1 m² |
| Ultimate Vacuum | <10 Pa |
| Condensate Capacity (24 h) | 8 L/24 h |
| Cold Trap Temperature | <−110 °C |
| Optional Cold Trap Range | −100 to −165 °C |
| Shelf Temperature Uniformity | ±0.1 °C (per m²) |
| Control System | Industrial PLC + HMI Touchscreen |
| Compliance | ISO 9001 Manufacturing Process |
| Vacuum Flow Optimization | Patented Forced-Gas-Flow Path Design |
| Heat Transfer Efficiency | >95% (Patented Channel Architecture) |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | Lab-1B-110 |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Lyophilization Area | 0.08 m² |
| Ultimate Vacuum | <3 Pa |
| Condenser Temperature | −110 °C |
| Condensate Capacity (24 h) | 3 L |
| Refrigeration System | Industrial Scroll Compressor |
| Vacuum Pump | Korean-Made Rotary Vane Pump (2 L/s) |
| Control System | PLC + 7″ Industrial Touchscreen HMI |
| Data Logging | Internal Memory (90 days), USB Storage (optional), PC Database Integration (optional) |
| Safety Features | Overcurrent/Overload Protection, 36 V Low-Voltage Heating Circuit, Dual-Temperature Overheat Cut-off, Vacuum Interlock for Drain Valve |
| Brand | BIOCOOL |
|---|---|
| Origin | Beijing, China |
| Model | Lab-1B-110E |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Freeze-Drying Area | 0.08 m² |
| Ultimate Vacuum | <3 Pa |
| Condenser Temperature | −110 °C |
| Condensate Capacity (24 h) | 3 L |
| Refrigeration System | Industrial-Grade Dual-Stage Cascade Compressor |
| Vacuum Pump | Korea-Made Rotary Vane Pump (2 L/s) |
| Control Interface | Industrial Touchscreen HMI with PLC Core |
| Data Logging | Internal Memory (90-day buffer), USB Export (Optional), PC Database Sync (Optional) |
| Compliance | Designed for GLP-aligned lab environments |