Jiubin
Filter
Showing 91–120 of 160 results
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-220A |
| Refrigeration System | Mechanical Compression |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Range | –20 °C to +150 °C / –40 °C to +150 °C / –60 °C to +150 °C / –80 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 20–98 %RH |
| Humidity Deviation | +2 / –3 %RH |
| Cooling Rate (No Load) | 0.7–1.0 °C/min |
| Heating Rate (No Load) | 2–3 °C/min |
| Internal Chamber Dimensions (Optional) | 40×50×50 cm or 50×60×75 cm |
| Noise Level | ≤65 dB(A) |
| Power Supply | AC 380 V, 50 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-220B |
| Temperature Range | −20 °C to +150 °C (also available in −40/−60/−80 °C min variants) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 20–98 %RH |
| Humidity Deviation | +2 / −3 %RH |
| Cooling Rate | 0.7–1 °C/min (unloaded) |
| Heating Rate | 2–3 °C/min (unloaded) |
| Internal Chamber Dimensions | 40×50×50 cm or 50×60×75 cm (customizable) |
| Noise Level | ≤65 dB(A) |
| Power Supply | AC 380 V / 50 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Taiwan |
| Model | JB-220D |
| Internal Chamber Dimensions (W×H×D) | 450–600 × 350–500 × 350–500 mm |
| External Dimensions (W×H×D) | 1500–1900 × 1950–2000 × 1450–1550 mm |
| High-Temperature Zone Range | +80 to +200 °C |
| Low-Temperature Zone Range | −10 to −55 °C / −10 to −65 °C / −10 to −75 °C |
| Test Chamber Operating Range | +60 to +150 °C (hot) / −10 to −40 °C, −10 to −55 °C, or −10 to −60 °C (cold) |
| Heating Rate | +60 to +200 °C in ≈25 min |
| Cooling Rate | +20 to −55 °C <60 min |
| Temperature Recovery Time | ≤30 min (hot soak at 150 °C) |
| Max. Sample Weight | 2.5 / 5 / 10 kg |
| Interior Material | Mirror-finish SUS#304 stainless steel |
| Exterior Material | SUS#304 stainless steel |
| Insulation | High-density glass wool + polyurethane foam |
| Refrigeration System | Cascade-type air-cooled or water-cooled system with imported hermetic or semi-hermetic compressors (EU/US origin) |
| Controller | Touchscreen HMI with programmable logic, real-time curve display, and multi-language UI (English & Chinese) |
| Safety Protections | Compressor overcurrent/overheat, chamber overtemperature/overpressure, heater dry-run, motor overload, refrigerant pressure anomaly |
| Standard Accessories | 2 adjustable stainless steel shelves, 1 Ø50 mm test port |
| Power Supply | AC 3-phase 5-wire, ±10% tolerance, 50 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-220D |
| Internal Chamber Dimensions (W×H×D) | 450–600 × 350–500 × 350–500 mm |
| External Dimensions (W×H×D) | 1500–1900 × 1950–2000 × 1450–1550 mm |
| High-Temperature Zone Range | +80 to +200 °C |
| Low-Temperature Zone Range | −75 to −10 °C (selectable configurations: −55/−60/−75 °C) |
| Test Chamber Operating Range | +60 to +150 °C (high), −10 to −60 °C (low) |
| Temperature Transition Time | ≤25 min (−10 → +200 °C), ≤90 min (+20 → −75 °C) |
| Recovery Time | ≤5 min (after thermal shock cycle) |
| Payload Capacity | 2.5 / 5 / 10 kg |
| Inner Liner | Mirror-finish SUS304 stainless steel |
| Outer Casing | SUS304 stainless steel |
| Insulation | High-density glass wool + polyurethane foam |
| Refrigeration System | Cascade air-cooled or water-cooled dual-stage refrigeration with imported hermetic or semi-hermetic compressors |
| Refrigerants | R507 & R23 (HFC-based, ozone-friendly) |
| Controller | Programmable touchscreen HMI (LCD), multi-language interface (English/Chinese), real-time curve display and logging |
| Safety Protections | Compressor overcurrent/overheat, high/low pressure cutoff, heater dry-run prevention, motor overload, abnormal air pressure interlock |
| Power Supply | AC 3-phase 5-wire, ±10% tolerance, 50 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Taiwan |
| Model | JB-228 |
| Internal Dimensions (W×H×D) | 500 × 400 × 170 mm |
| Chamber Material | SUS304 Stainless Steel Interior & Exterior |
| Insulation | Polyurethane (PU) Foam |
| Heating Medium | Saturated Steam |
| Operating Temperature | 97 °C (±0.5 °C stability) |
| Temperature Sensor | PT-100 Platinum Resistance Thermometer |
| Control System | PID + SSR with Digital LED Display |
| Temperature Resolution | 0.1 °C |
| Timer Range | 1–999 min with End-of-Cycle Alarm and Automatic Power Cut-off |
| Water Level Management | Auto-refill Reservoir System |
| Power Supply | 220 V AC, 50/60 Hz |
| Ramp Time to Setpoint | Approx. 40 min |
| Safety Features | Dual-limit overtemperature protection, dry-run prevention, and fail-safe circuit interruption |
| Brand | Jiubin |
|---|---|
| Model | JB-230 |
| Measurement Principle | Dual-channel analog signal acquisition with Σ-Δ A/D conversion (12-bit) |
| Force Range | 0–1000 N |
| Travel Range | 0–150 mm |
| Force Resolution | 1 N |
| Travel Resolution | 1 mm |
| Accuracy | ±1% FS |
| Display | Dot-matrix LCD with Chinese character interface |
| Power Supply | 8.4 V Ni-Cd rechargeable battery pack |
| Communication | RS232 (9-pin D-sub, 9600 bps, 8N1, pin 2 RX, pin 3 TX, pin 5 GND) |
| Compliance | Designed for automotive brake/clutch pedal evaluation per ISO 13479, SAE J2865, and GB/T 26777–2011 |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2300 |
| Pricing | Available Upon Request |
| Power Consumption | <10 W (Static: 5 W) |
| Internal Power Supply | DC 9.6 V (8 × 1.2 V / 700 mAh Ni-Cd batteries) |
| External Power Input | DC 12 V |
| Communication Interface | Standard 9-pin RS232 (TXD on Pin 3, RXD on Pin 2, GND on Pin 5) |
| Serial Configuration | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Dimensions | 205 × 145 × 55 mm |
| Weight | 1.0 kg (including battery) |
| Operating Temperature | −15 °C to +45 °C |
| Relative Humidity | 30%–80% RH |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2454 |
| Pricing | Upon Request |
| Drawer Width Range | 150–1300 mm (adjustable) |
| Load Capacity | 0–100 N (programmable load-triggered stop) |
| Test Speed | 0.3–2 m/s |
| Stroke Accuracy | ≤ ±0.25 m |
| Stroke Range | 0.05–99.9 km (resolution: 0.25 m) |
| Time Measurement Error | ±0.1 s |
| Overall Dimensions (L×W×H) | 800 × 600 × 1200 mm |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2500A |
| Price Range | USD 7,000 – 14,000 |
| Internal Chamber Dimensions (D×W×H) | 670 × 850 × 660 mm |
| External Dimensions (D×W×H) | 1200 × 1250 × 1800 mm |
| Temperature Range | +10°C to +80°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Black Panel Temperature Range | 50°C to 90°C |
| Humidity Range | 30–98% RH |
| Humidity Uniformity | ±5% RH |
| Humidity Stability | ±2% RH |
| Irradiance Control | 550 W/m² (290–800 nm) |
| Xenon Lamp Configuration | 3 × 2.5 kW (Total 7.5 kW), Adjustable Output |
| Lamp Life | ≥2500 h |
| Sample-to-Lamp Distance | 350–375 mm |
| Sample Tray Size | 400 × 700 mm |
| Rain Cycle | 0–240 min (interval mode) |
| Spray Duration/Rest | 18 min / 102 min |
| Continuous Spray Time | 0–9999 min |
| Exposure Timer | 0–999 h (setpoint) |
| Program Timer | 0–99 h (cyclic) |
| Heating Power | 1 kW |
| Humidification Power | 1 kW |
| Noise Level | ≤80 dB(A) at 1 m |
| Water Pressure for Nozzles | 1.0–1.5 bar |
| Brand | Jiubin |
|---|---|
| Model | JB-250A |
| Origin | Shanghai, China |
| Type | Mortar-and-Pestle Grinder |
| Sample Hardness | Unrestricted (Suitable for Ultra-Hard Materials) |
| Max Feed Size | ≤0.5 mm |
| Final Particle Size | <10 µm (Sub-micron to Nanoscale Distribution) |
| Batch Capacity | 550 g |
| Mortar Diameter | 250 mm |
| Pestle Speed | 120 rpm |
| Mortar Speed | 10 rpm |
| Pestle Motor Power | 60 W |
| Mortar Motor Power | 40 W |
| Mortar Material | High-Alumina Ceramic (Al₂O₃ ≥92%) |
| Pestle Tip Material | High-Alumina Ceramic |
| Programmable Runtime | Yes |
| Dimensions (L×W×H) | 500 × 500 × 920 mm |
| Net Weight | 35 kg |
| Voltage | 220 V, 50/60 Hz |
| Brand | Jiubin |
|---|---|
| Model | JB-280D |
| Origin | Shanghai, China |
| Chamber Dimensions (W×D×H) | 1200 × 1000 × 600 mm |
| External Dimensions (W×D×H) | 2000 × 1300 × 1350 mm |
| Temperature Range | +5°C to 55°C |
| Salt Spray Deposition Rate | 1–2 mL/h per 80 cm² |
| Spray Modes | Continuous or Intermittent (selectable) |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Timer Range | 1–9999 s/min/h (adjustable) |
| Power Supply | 220 V AC, 50 Hz, 4.5 kW |
| Construction Material | Molded FRP (fiberglass-reinforced plastic) |
| Nozzle Type | Crystallization-resistant quartz glass nozzle |
| Humidity Control | Saturated air chamber with automatic water replenishment system |
| Safety Features | Leakage current protection, over-temperature cutoff, pressure tank de-fogging system |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-3000 |
| Pricing | Available Upon Request |
| Brand | Jiubin |
|---|---|
| Model | JB-3009 |
| Load Range | 0–5 N |
| Accuracy Class | 0.5 |
| Traverse Distance | 70 mm / 150 mm |
| Standard Sled Mass | 200 g |
| Test Speed | 100 mm/min |
| Operating Temperature | 10–40 °C |
| Relative Humidity | 20–70 % RH |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 400 × 300 × 180 mm |
| Weight | 10 kg |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-300F |
| Pricing | Upon Request |
| Chamber Dimensions | 300 × 1200 × 450 mm |
| Fuel Gas | High-Purity Propane or Liquefied Petroleum Gas (LPG) |
| Specimen Length | 600 ± 25 mm |
| Specimen Outer Diameter | 1–30 mm |
| Test Environment | Non-ventilated enclosure |
| Ignition Source | Calibrated propane burner with adjustable flow control (dual gas/air mass flow meters) |
| Operation Mode | Manual or Auto-select toggle switch |
| Compliance | GB/T 18380.1–2001, IEC 60332-1-2 (Ed. 3.0, 2021) |
| Brand | Jiubin |
|---|---|
| Model | JB-3500F |
| Origin | Shanghai, China |
| Instrument Type | Thermal Gravimetric Analyzer (TGA-based) for Polymer Additive Quantification |
| Compliance | ASTM D1606, ISO 6964, GB/T 13021, USP <467> (residual solvent context), GLP-ready architecture |
| Sample Form | Granules, pellets, powder, film fragments |
| Temperature Range | Ambient to 950 °C |
| Heating Rate | 0.1–100 °C/min |
| Balance Resolution | 0.01 mg |
| Atmosphere Control | Dual-gas (N₂/air) switching module |
| Data Output | CSV, PDF, XML |
| Software | Jiubin TGA Pro v3.2 (21 CFR Part 11 compliant audit trail, user role management, electronic signature support) |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-3500F |
| Application | Quantitative carbon black and ash content determination in thermoplastics, elastomers, and cable materials |
| Operating Atmosphere | Nitrogen-purged inert environment with controlled oxidative calcination |
| Temperature Control | Programmable high-precision furnace (up to 950 °C) |
| Measurement Principle | Gravimetric analysis after pyrolytic decomposition and selective oxidation |
| Compliance Basis | ASTM D1606, ISO 6964, GB/T 3512, IEC 60811-4-1 |
| Brand | Jiubin |
|---|---|
| Model | JB-3500F |
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Pricing | Upon Request |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400 |
| Grinding Chamber Diameter | 400 mm |
| Chamber Depth | 200 mm |
| Batch Capacity | 5 L |
| Pestle Rotation Speed | 1–180 rpm (adjustable) |
| Grinding Time Range | 1–999 min (programmable) |
| Mortar Material | Alumina (99% Al₂O₃) |
| Final Particle Size | 0.01–0.5 mm |
| Sample Type | Hard and brittle solids |
| Instrument Category | Laboratory mortar grinder |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-400 |
| Instrument Type | Mortar Grinder |
| Sample Suitability | Hard and Brittle Solids |
| Output Particle Size | 0.01–0.5 mm |
| Batch Capacity | 5 L |
| Mortar Diameter | 400 mm |
| Mortar Depth | 200 mm |
| Pestle Rotational Speed | 1–180 rpm (adjustable) |
| Grinding Time Range | 1–999 min (programmable) |
| Mortar Material | Alumina (99% Al₂O₃) |
| Brand | Jiubin |
|---|---|
| Model | JB-400 |
| Type | Mortar Grinder |
| Sample Compatibility | Hard & Brittle Solids |
| Maximum Batch Capacity | 5000 g |
| Output Particle Size | 0.01–0.5 mm (10–500 µm) |
| Mortar Bowl Diameter | 400 mm |
| Pestle Rotation Speed | 1–180 rpm (adjustable) |
| Mortar Rotation Speed | 10 rpm |
| Pestle Motor Power | 120 W |
| Mortar Motor Power | 60 W |
| Grinding Time Range | 1–999 min (programmable) |
| Bowl & Pestle Material | Alumina (99.5% Al₂O₃) |
| Dimensions (L×W×H) | 600 × 690 × 1110 mm |
| Net Weight | 18 kg |
| Voltage | 220 V, 50/60 Hz |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400 |
| Grinding Mechanism | Triple-rod ceramic mortar system |
| Drive | Adjustable-speed motor with pneumatic vertical lift |
| Sample Type | Hard and brittle solids (e.g., ceramics, carbides, minerals, pharmaceutical tablets) |
| Output Particle Size | < 10 µm (D90) |
| Material Contact Parts | Fully ceramic (Al₂O₃ or ZrO₂-lined mortar and pestles) |
| Compliance | Designed for GLP-compliant lab environments |
| Safety | Integrated pneumatic pressure regulation (0.4–0.7 MPa), oil-mist lubrication unit, emergency stop circuit |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JB-400 |
| Instrument Type | Mortar Grinder |
| Sample Applicability | Hard and Brittle Materials |
| Final Particle Size | < 0.01 mm |
| Batch Capacity | 5 L |
| Drive System | Variable-Speed Motor |
| Grinding Media | Ceramic Mortar & Pestles (3-Pestle Configuration) |
| Actuation | Pneumatic Lift Mechanism |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400 |
| Grinding Principle | Mortar-and-pestle with triple ceramic pestles driven by adjustable-speed motor |
| Drive Type | Pneumatic lift + electric rotation |
| Grinding Chamber Material | High-purity alumina ceramic (95% Al₂O₃) |
| Sample Type | Hard and brittle solids, pastes, and viscous suspensions |
| Max Batch Capacity | 5 L |
| Final Particle Size | ≤10 µm (dry grinding), sub-micron achievable under optimized wet-grinding conditions |
| Temperature Rise | <8 °C after 30 min continuous operation |
| Compliance | Designed to meet ISO 17025 laboratory environment requirements for mechanical stability and contamination control |
| Safety | Integrated pneumatic pressure monitoring, emergency stop, and interlocked lid sensor |
| Brand | Jiubin |
|---|---|
| Model | JB-400 Series |
| Origin | Shanghai, China |
| Equipment Type | Mortar Grinder |
| Sample Type | Hard & Brittle Solids |
| Output Particle Size | 0.01–0.5 mm |
| Batch Capacity | 5 L |
| Mortar Diameter | 400 mm |
| Mortar Depth | 200 mm |
| Pestle Speed | 1–180 rpm (adjustable) |
| Grinding Time Range | 1–999 min (programmable) |
| Mortar Material | Alumina (99.5% Al₂O₃) |
| Pestle Configuration | Triple-Pestle Design |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | Jiubin |
|---|---|
| Model | JB-4000 |
| Origin | Shanghai, China |
| Power Supply | 220 V AC ±10% |
| Max Working Pressure | 2.5 MPa |
| Burst Pressure | 2.7–3.3 MPa |
| Temperature Control Range | Ambient to 200 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Volume | 4000 cm³ |
| External Dimensions | 560 × 420 × 670 mm |
| Heating Power | 2.4 kW |
| Temperature Display | Digital, Intelligent PID Control |
| Inner Vessel Material | Stainless Steel (AISI 304) |
| Outer Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Compliance | GB/T 2951.12–2008, GB/T 5013–2008, VDE 0282 |
| Brand | Jiubin |
|---|---|
| Model | JB-400H |
| Origin | Shanghai, China |
| Die Diameter | Φ2.095 ± 0.005 mm |
| Die Length | 8.000 ± 0.025 mm |
| Barrel Diameter | Φ9.550 ± 0.007 mm |
| Barrel Length | 152 ± 0.1 mm |
| Piston Head Diameter | 9.474 ± 0.007 mm |
| Piston Head Length | 6.350 ± 0.100 mm |
| Standard Test Loads (8 levels) | 0.325 kg to 21.600 kg (3.187 N to 211.82 N |
| Temperature Range | Ambient to 450 °C |
| Temperature Stability | ±0.2 °C |
| Control System | PLC-based |
| Human-Machine Interface | 5-inch color touch screen |
| Display | LCD |
| Report Output | Thermal printer support |
| Melt Cutting Modes | Manual / Time-controlled / Automatic |
| Test Method | Gravimetric (MFR) |
| Dimensions (L×W×H) | 250 × 350 × 510 mm |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-400H |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Pricing | Available Upon Request |
| Brand | Jiubin |
|---|---|
| Model | JB-40C |
| Origin | Shanghai, China |
| Rated Load | 200 kN |
| Bend Head Diameter Range | Φ6–Φ40 mm |
| Forward Bend Angle | 180° |
| Reverse Bend Sequence | 90° forward + 20° reverse |
| Span Adjustment | ≥340 mm |
| Piston Stroke | 410 mm |
| Hydraulic Pressure | 31.5 MPa |
| Test Speed | 0–100 mm/min (adjustable) |
| Power Supply | 380 V, 50 Hz |
| Net Weight | 550 kg |
| Dimensions (L×W×H) | 1460 × 750 × 2400 mm |
| Brand | Jiubin |
|---|---|
| Origin | Shanghai, China |
| Model | JB-600-5 |
| Sinusoidal Force Range | 9800–49000 N |
| Rated Frequency Range | 5–3000 Hz |
| Peak Velocity | 1020 m/s |
| Zero-Load Acceleration | 1.5 m/s² |
| Peak-to-Peak Displacement | 51 mm |
| Payload Capacity | 140–1000 kg |
| Power Consumption | 22–76 kVA |
| Supply Voltage | AC 380 V ±10%, 50 Hz |
| Moving Coil Mass | 3–50 kg |
| Power Amplifier Weight | 250–800 kg |
| Cooling Method | Forced Air |
| Compliance | GB/T 13310-91, Q/320502SN001-2003 |
| Brand | Jiubin |
|---|---|
| Model | JB-820 |
| Origin | Shanghai, China |
| Power Consumption | <3 W (1 W standby) |
| Built-in Power | 9.6 V DC (8 × 1.2 V / 800 mAh Ni-MH batteries) |
| External Power Input | 12 V DC / 5 A |
| Dimensions | 330 × 220 × 75 mm |
| Weight | 2.0 kg (including battery) |
| Operating Temperature | −20 °C to +45 °C |
| Relative Humidity | 30–80 % RH |
| Speed Resolution | 0.01 km/h |
| Display | 240 × 128 dot-matrix LCD with Chinese UI |
| Data Storage | SD card (FAT32 formatted, up to 32 GB) + USB interface |
| Output Interface | 1 × analog voltage output (0–5 V, scalable), optional Bluetooth module |
| Printing | Integrated thermal printer |
| Sensor Options | GPS-based speed sensor, non-contact optical speed sensor |