Labonce
Filter
Showing 31–60 of 129 results
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-150TPS-1 |
| Internal Volume | 150 L |
| Temperature Range | 15–50 °C |
| Illumination Control | Independent Visible Light (100–8000 Lux, D65-spectrum compliant) and Near-Ultraviolet (320–400 nm, 0.84–5 W/m²) |
| Uniformity | ±2.0 °C intra-shelf temperature deviation, <±1.0 °C temperature fluctuation during illumination |
| Compliance | ICH Q1B, Chinese Pharmacopoeia 2020 Edition |
| Construction | Exterior – Powder-coated steel |
| Insulation | High-density polyurethane foam |
| Cooling System | Imported hermetic compressor |
| Controller | ≥7-inch programmable color touchscreen with audit trail and three-tier user permissions |
| Data Management | Built-in thermal dot-matrix printer + internal electronic storage + USB export |
| Safety | Dual overtemperature protection, compressor overheat/overpressure cutoff, remote SMS alert for temperature deviation and power failure |
| Dual-door design | Inner tempered glass door + outer solid insulated door |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Ambient Operating Range | +5 to +35 °C |
| Rated Power | 1.5 kW |
| Configuration | Single illumination shelf, test port with rubber plug, casters, door lock |
| Brand | Labonce |
|---|---|
| Model | Labonce-20000GS |
| Temperature Range | 20–45°C (±0.5°C uniformity, ±1.0°C deviation) |
| Humidity Range | 20–80% RH (±3.0% RH deviation) |
| Internal Volume | 20,000 L |
| Internal Dimensions (W×D×H) | 2200 × 4100 × 2200 mm |
| External Dimensions (W×D×H) | 2400 × 4300 × 2400 mm |
| Power Requirement | 6.0 kW |
| Compliance | GB/T 10586-2006, JJF 1101-2019, ICH Q1–Q5, Chinese Pharmacopoeia 2020 Edition |
| Control System | 7-inch color programmable touchscreen with audit trail, triple-level user access, and FDA 21 CFR Part 11–compliant data management options |
| Brand | Labonce |
|---|---|
| Model | Labonce-2000BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 2000 L |
| Internal Dimensions (W×D×H) | 1500×970×1400 mm |
| External Dimensions (W×D×H) | 1710×1380×1990 mm |
| Power Consumption | 2.5 kW |
| Temperature Uniformity | ≤2.0°C at 37°C, ≤3.0°C at other setpoints |
| Temperature Fluctuation | ±0.5°C (high temp), ±1.0°C (low temp) |
| Ambient Operating Temperature | +5 to +35°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Standard Shelving | 4 adjustable stainless steel shelves (capacity: 8 total) |
| Construction | Exterior – powder-coated steel |
| Compliance | GB/T 28851-2012 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Labonce-2000GS-FC |
| Temperature Range | 10–65 °C |
| Humidity Range | 15–95 %RH |
| Internal Volume | 2000 L |
| Internal Dimensions (W×D×H) | 1500×970×1400 mm |
| External Dimensions (W×D×H) | 1710×1380×1990 mm |
| Power Consumption | 3.5 kW |
| Temperature Uniformity | ±1.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Standard Compliance | ICH Q1–Q5, Chinese Pharmacopoeia 2020 Edition |
| Control System | 7-inch programmable color touchscreen with variable-frequency drive (VFD) output display |
| User Access | Three-tier role-based authentication (Admin / Supervisor / Operator) |
| Audit Trail | Time-stamped, tamper-evident operation and alarm logs exportable via USB in read-only format |
| Refrigeration | Imported hermetic inverter compressor |
| Humidity Sensor | OEM capacitive RH sensor (low drift, maintenance-free) |
| Data Output | Integrated dot-matrix printer + internal electronic storage |
| Safety Systems | Independent overtemperature cutoff, compressor overheat/overpressure protection, low-water and dry-run prevention |
| Alarm Modes | Local audible alarm + remote SMS notification for temperature/humidity deviation and power failure |
| Door Design | Dual-door configuration — outer solid insulated door |
| Brand | Labonce |
|---|---|
| Model | Labonce-240JM |
| Temperature Range | RT+20 °C to 200 °C |
| Chamber Volume | 240 L |
| Internal Dimensions (W×D×H) | 550×550×750 mm |
| External Dimensions (W×D×H) | 750×750×1150 mm |
| Power Rating | 2.5 kW |
| Standard Shelving | 2 stainless steel shelves (max. 11 optional) |
| Temperature Uniformity | ±3.0 °C at ≤200 °C |
| Temperature Fluctuation | ±1.0 °C |
| Input Voltage | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Construction | Exterior – powder-coated steel |
| Control System | Digital PID temperature controller |
| Safety | Independent over-temperature protection circuit |
| Brand | Labonce |
|---|---|
| Model | Labonce-245JMH |
| Temperature Range | RT+20°C to 300°C |
| Chamber Volume | 240 L |
| Internal Dimensions (W×D×H) | 550×550×750 mm |
| External Dimensions (W×D×H) | 750×750×1150 mm |
| Power Supply | AC 220V±10% 50Hz or AC 380V±10% 50Hz |
| Rated Power | 2.5 kW |
| Temperature Uniformity | ±3.0°C (at ≤200°C) |
| Temperature Fluctuation | ±1.0°C |
| Standard Shelving | 2 adjustable stainless steel shelves (max. 7 configurable) |
| Construction | Exterior – powder-coated steel |
| Control System | Digital PID temperature controller |
| Safety | Independent over-temperature protection circuit |
| Compliance | Designed per IEC 61010-1 for laboratory electrical safety |
| Brand | Labonce |
|---|---|
| Model | Labonce-250BC |
| Temperature Range | 2–14°C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 0.63 kW |
| Temperature Uniformity | ≤2.0°C |
| Temperature Fluctuation | <±1.0°C |
| Temperature Deviation | <±2.0°C |
| Ambient Operating Temperature | +5 to +30°C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Construction | Exterior – Powder-coated steel |
| Insulation | High-density polyurethane foam |
| Compressor | Imported hermetic industrial compressor |
| Control System | Programmable color touchscreen controller with triple-level user access and electronic data logging |
| Safety Features | Compressor overheat & high-pressure overload protection |
| Alarm System | Local audible alarm + remote SMS alert for temperature deviation and power failure |
| Standard Accessories | Test port with rubber plug, casters with brakes, door lock, observation window |
| Optional | Needle-type micro printer |
| Compliance | YY/T 0086–2020 Medical Refrigerated Cabinets |
| Brand | Labonce |
|---|---|
| Model | Labonce-250BI |
| Temperature Range | 0–60°C |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 520×460×1050 mm |
| External Dimensions (W×D×H) | 620×690×1650 mm |
| Power Consumption | 0.6 kW |
| Standard Shelving | 3 adjustable stainless steel shelves (8 total positions) |
| Temperature Uniformity | ≤2.0°C at 37°C |
| Temperature Fluctuation | ±0.5°C (high temp) |
| Ambient Operating Range | +5 to +35°C |
| Input Power | AC 220 V ±10%, 50 Hz |
| Compliance | GB/T 28851–2012 |
| Cooling System | Imported hermetic industrial compressor |
| Control Interface | LCD controller with adjustable fan speed |
| Data Logging | Internal electronic storage + thermal dot-matrix printer + USB data export |
| Safety Features | Independent over-temperature protection, compressor overheat/overpressure cut-off, audible alarm |
| Construction | Exterior – powder-coated steel |
| Optional Accessories | UV germicidal lamp, SMS alert module, humidity display, touch-screen controller with 3-tier user permissions and audit trail (BIT variant) |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Labonce-250CGS-FC |
| Quotation | Upon Request |
| Temperature Range | 15–65°C |
| Humidity Range | 20–95% RH |
| Chamber Volume | 250 L |
| Inner Dimensions (W×D×H) | 600×500×830 mm |
| Outer Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 (7 total positions) |
| Temp. Uniformity (no light) | ≤2.0°C |
| Temp. Fluctuation | <±0.5°C |
| Temp. Deviation | <±1.0°C |
| RH Fluctuation | <±2% RH |
| RH Deviation | <±3% RH |
| Visible Light Range | 100–8000 lux |
| Cumulative Visible Light Dose | ≥1.2×10⁶ lux·hr |
| Near-UV Irradiance Range | 0.84–5 W/m² |
| Cumulative Near-UV Energy | ≥200 W·hr/m² |
| Ambient Operating Temperature | +5 to +35°C |
| Supply Voltage | AC 220 V ±10%, 50 Hz |
| Control System | 7-inch color programmable touchscreen with variable-frequency compressor output display |
| User Access | Three-tier permission levels with username/password authentication |
| Audit Trail | Timestamped operation and alarm logs, exportable via USB in write-protected format |
| Humidity Sensor | Imported capacitive type, high accuracy, low drift, maintenance-free |
| Safety Protections | Compressor overheat/overpressure, water shortage, dry-run prevention, independent overtemperature cutoff |
| Alarm Outputs | Local audible alarm + remote SMS alerts for temperature/humidity deviation and power failure |
| Dual-door Design | Tempered glass inner door + insulated solid outer door |
| Insulation | High-density polyurethane foam throughout cabinet walls and door |
| Interior Material | Mirror-finish AISI 304 stainless steel |
| Exterior Material | Powder-coated steel |
| Compliance References | ICH Q1A(R2), Q1B, Q5C |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250CH-T |
| Temperature Range | 15–60 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Standard Shelves | 3 (adjustable), up to 7 total |
| Compliance | GB/T 10586–2006 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250CT |
| Pricing | Available Upon Request |
| Temperature Range | 0–85 °C |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.5 kW |
| Standard Shelves | 3 shelves (7 total positions) |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Compliance | GB/T 10586–2006 |
| Control System | Programmable Color Touchscreen Controller with 3-Tier User Permissions & Audit Trail |
| Data Storage | Internal Electronic Logging + USB Export |
| Cooling System | Imported Inverter Compressor (≥50% Energy Savings) |
| Safety | Independent Over-Temperature Protection Circuit |
| Door Design | Dual-door — outer solid insulated door + inner tempered glass door |
| Construction | Exterior: Powder-coated steel |
| Interior | Stainless steel chamber with built-in glass observation window |
| Optional Accessory | Pin-type micro printer |
| Brand | Labonce |
|---|---|
| Model | Labonce-250FC |
| Temperature Range | –25 °C ±2 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 850×990×1690 mm |
| Power Consumption | 1.4 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±2.0 °C |
| Refrigeration System | Imported hermetic industrial compressor |
| Insulation | High-density polyurethane foam |
| Interior Material | Mirror-finish 304 stainless steel |
| Control System | Programmable color touchscreen controller with triple-level access control and electronic data logging |
| Compliance | YY/T 0086–2020 (Medical Refrigerators) |
| Ambient Operating Range | +5 °C to +30 °C |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Safety Features | Compressor overheat & overpressure protection, audible/visual alarms, remote SMS alert for temperature deviation and power failure |
| Optional | Needle-type micro printer, test port with rubber plug, casters, door lock |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | Labonce-250FS |
| Quotation | Upon Request |
| Temperature Range | 0–70 °C |
| Humidity Range | 10–80 %RH |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 (adjustable) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.2 °C |
| Temperature Deviation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH |
| Humidity Fluctuation | ±1.5 %RH |
| Humidity Deviation | <±2 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Compliance Standards | ICH Q1A(R2), Q5C, ChP 2020 |
| Insulation | High-density polyurethane foam |
| Interior Material | Mirror-finish 304 stainless steel |
| Exterior Material | Powder-coated steel |
| Control System | 7-inch color programmable touchscreen controller |
| User Access | Three-tier role-based authentication |
| Audit Trail | Time-stamped, tamper-evident event logging with USB export (read-only format) |
| Cooling System | Imported hermetic compressor |
| Humidity Sensor | Capacitive-type, factory-calibrated, maintenance-free |
| Data Output | Integrated thermal printer + internal non-volatile memory |
| Safety Systems | Independent overtemperature cutoff, compressor overheat/overpressure protection, low-water and dry-burn prevention, door-open alarm |
| Alarm Modes | Local audible alarm + remote deviation/power-loss notification |
| Door Design | Dual-door — outer solid insulated door + inner tempered glass observation door |
| Additional Features | Ø50 mm test port with silicone plug, casters with brakes, mechanical door lock |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250FT |
| Pricing | Upon Request |
| Temperature Range | 0–70 °C |
| Humidity Range | 10–80 %RH |
| Chamber Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 (adjustable) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Fluctuation | ±0.2 °C |
| Temperature Deviation | ±0.5 °C |
| Humidity Uniformity | ±2.0 %RH |
| Humidity Fluctuation | ±1.5 %RH |
| Humidity Deviation | <±2.0 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Compliance Standards | ICH Q1A–Q1E (2003), Chinese Pharmacopoeia 2020 Edition |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GDJ |
| Temperature Range | -20 °C to 150 °C (Configurable Options: -40 °C / -60 °C to 150 °C) |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 650 mm × 550 mm × 700 mm |
| External Dimensions (W×D×H) | 930 mm × 1180 mm × 1850 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Construction | Exterior – Powder-coated steel |
| Control System | Programmable color touchscreen controller with multi-segment ramp-soak profiles and constant-value operation |
| Data Logging | Internal electronic storage with USB export capability |
| Safety Protections | Compressor overheat & high-pressure cut-off, fan overheat protection, independent over-temperature safety cutoff, upper/lower temperature deviation alarm |
| Compliance | GB/T 10592–2008 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Labonce-250GS-FC |
| Pricing | Available Upon Request |
| Temperature Range | 10–65 °C |
| Humidity Range | 15–95 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 (adjustable), up to 7 configurable |
| Temperature Uniformity | ±1.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Compressor | Imported Hermetic Inverter Compressor |
| Humidity Sensor | Imported Capacitive RH Sensor |
| Controller | 7-inch Full-Color Programmable Touchscreen |
| User Access Control | Three-Tier Role-Based Authentication |
| Audit Trail | Time-stamped, tamper-evident operation and alarm logs exportable via USB in read-only format |
| Data Output | Built-in thermal line printer + internal electronic storage with timestamped records |
| Safety Systems | Independent overtemperature protection, compressor overheat/overpressure cutoff, dry-run prevention, water shortage detection, anti-dry-burn safeguards |
| Alarm Modes | Local audible alarm + remote SMS alert for temperature/humidity deviation and power failure |
| Door Design | Dual-door system — outer insulated solid door + inner tempered glass observation door (minimizes internal environmental disturbance during visual inspection) |
| Insulation | High-density polyurethane foam (≥120 mm thickness, closed-cell structure) |
| Interior Material | Mirror-finish AISI 304 stainless steel |
| Exterior Finish | Powder-coated cold-rolled steel |
| Compliance References | ICH Q1A(R2), Q5C, Q5D |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GW |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (at ≤200 °C) |
| Temperature Stability | ≤ ±0.5 °C (at ≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Control System | Imported digital display controller (GW) or programmable color touchscreen controller with audit trail & three-tier user permissions (GW-T) |
| Construction | Exterior – powder-coated steel |
| Safety | Independent over-temperature protection circuit |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | Labonce-250GW-T |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Controller | Programmable color touchscreen controller with three-tier user permission management and audit trail capability |
| Compliance | GB/T 11158–2008 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-250GWH |
| Temperature Range | RT+20 °C to 300 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Rating | 3.0 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Controller Options | Digital display controller (GW) or programmable color touchscreen controller with 3-level user permissions and audit trail (GW-T) |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GWH-T |
| Temperature Range | +20 to 300 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600 × 600 × 700 mm |
| External Dimensions (W×D×H) | 1250 × 850 × 1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Controller Type | Programmable color touchscreen with 3-tier user permissions and audit trail |
| Temperature Uniformity | ≤ ±2.0 °C (≤200 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C (≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Construction | Exterior – powder-coated steel |
| Safety | Independent overtemperature protection circuit |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | labonce-250JS |
| Temperature Range | –40 °C to +150 °C (configurable) |
| Humidity Range | 20–98 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 650×550×700 mm |
| External Dimensions (W×D×H) | 930×1180×1850 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Accuracy | ±3 %RH (>75 %RH), ±5 %RH (≤75 %RH) |
| Heating Rate | 1–3 °C/min |
| Cooling Rate | 0.7–1 °C/min |
| Control System | Programmable Color Touchscreen Controller with Multi-Step & Constant-Value Modes |
| Data Logging | Internal Electronic Storage with USB Export |
| Safety Protections | Compressor Overheat & High-Pressure Cut-off, Fan Overheat Protection, Independent Over-Temperature Cut-out, Upper/Lower Limit Deviation Alarm |
| Construction | Exterior – Powder-Coated Steel |
| Air Circulation | Optimized Dual-Channel Airflow System |
| Refrigeration | Imported Hermetic Industrial Compressor |
| Optional Accessory | Pin-Type Micro Printer |
| Compliance | GB/T 10592–2008 |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-250LGS |
| Temperature Range | 15–65 °C |
| Humidity Range | 10–90 %RH |
| Chamber Volume | 250 L |
| Temperature Uniformity | ±0.5 °C (fluctuation), ±1.0 °C (deviation) |
| Humidity Uniformity | ±2.0 %RH (fluctuation), ±3.0 %RH (deviation) |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Standard Shelves | 3 pcs |
| Compliance | ICH Q1–Q5, Chinese Pharmacopoeia 2020 Edition, GMP/GLP-ready |
| Data Integrity | Audit trail, 3-tier user permissions, USB data export, thermal printer |
| Safety Systems | Independent overtemperature protection, compressor overheat/overpressure cutoff, low-water and dry-run prevention, door-open alarm |
| Dual-door Design | Tempered glass inner door + insulated solid outer door |
| Insulation | High-density polyurethane foam (≥80 mm thickness) |
| Interior Material | Mirror-finish 304 stainless steel |
| Exterior Finish | Powder-coated steel |
| Environmental Operating Range | +5 to +35 °C ambient |
| Electrical Supply | 220 V, 50/60 Hz |
| Brand | Labonce |
|---|---|
| Model | Labonce-250MI |
| Temperature Range | 0–60°C |
| Capacity | 250 L |
| Interior Dimensions (W×D×H) | 520×460×1050 mm |
| Exterior Dimensions (W×D×H) | 620×690×1650 mm |
| Power Consumption | 0.6 kW |
| Standard Shelving | 3 stainless steel shelves (8 optional) |
| Temperature Uniformity | ≤2.0°C at 37°C |
| Temperature Fluctuation | ±0.5°C (high temp), ±1.0°C (low temp) |
| Construction | Exterior – powder-coated steel |
| Refrigeration System | Imported hermetic industrial compressor |
| Control Interface | LCD controller with adjustable fan speed |
| Data Logging | Internal electronic storage + thermal dot-matrix printer (optional) + USB data export |
| Safety Features | Independent over-temperature protection, compressor overheat & high-pressure cut-off, audible alarm |
| Optional Accessories | UV germicidal lamp, interior LED lighting, test port, casters, SMS alert module, MIT touchscreen controller (with 3-tier user permissions and 21 CFR Part 11-compliant audit trail) |
| Brand | Labonce |
|---|---|
| Model | Labonce-250MIS |
| Temperature Range | 15–50 °C |
| Humidity Range | 50–85 %RH |
| Chamber Volume | 250 L |
| Interior Dimensions (W×D×H) | 600×500×830 mm |
| Exterior Dimensions (W×D×H) | 780×870×1650 mm |
| Power Consumption | 1.5 kW |
| Temperature Uniformity | ≤2.0 °C (@37 °C) |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±5.0 %RH |
| Standard Shelves | 3 (max. 8) |
| Input Voltage | AC 220 V ±10%, 50 Hz |
| Ambient Operating Temperature | +5 to +35 °C |
| Compliance | Designed for GLP-compliant microbiological testing environments |
| Brand | Labonce |
|---|---|
| Model | Labonce-250RC |
| Temperature Range | 5 ± 1 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600 × 500 × 830 mm |
| External Dimensions (W×D×H) | 780 × 880 × 1650 mm |
| Power Consumption | 0.63 kW |
| Temperature Uniformity | ≤1.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±1.0 °C |
| Refrigeration System | Dual hermetic industrial compressors (one active, one standby) |
| Insulation | High-density polyurethane foam |
| Interior Material | Mirror-finish 304 stainless steel |
| Exterior Material | Powder-coated steel |
| Control System | Programmable color touchscreen controller with triple-level user access and electronic data logging |
| Compliance | YY/T 0086–2020 |
| Safety Features | Compressor overheat & high-pressure overload protection, audible local alarm, remote SMS alert for temperature deviation and power failure |
| Optional | Needle-type micro printer, test port with rubber plug, casters, door lock, observation window |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-250TH-T |
| Pricing | Upon Request |
| Temperature Range | 0–100 °C |
| Humidity Range | 20–95 %RH |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×500×830 mm |
| External Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.8 kW |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±2.0 °C |
| Humidity Fluctuation | <±3 %RH |
| Humidity Deviation | <±3 %RH (>75 %RH), <±5 %RH (≤75 %RH) |
| Ambient Operating Temperature | +5 to +35 °C |
| Supply Voltage | AC 220 V ±10%, 50 Hz |
| Standard Shelves | 3 (adjustable), up to 7 positions |
| Compliant With | GB/T 10586–2006 Technical Specifications for Damp Heat Test Chambers |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic Instrument |
| Model | Labonce-250TT |
| Pricing | Available Upon Request |
| Temperature Range | 0–85 °C |
| Chamber Volume | 250 L |
| Interior Dimensions (W×D×H) | 600×500×830 mm |
| Exterior Dimensions (W×D×H) | 780×880×1650 mm |
| Power Consumption | 1.5 kW |
| Standard Shelves | 3 pcs (4 positions) |
| Temperature Uniformity | ≤1.0 °C |
| Temperature Fluctuation | <±0.5 °C |
| Temperature Deviation | <±0.7 °C |
| Compliance | GB/T 10586–2006 |
| Control System | Programmable Color Touchscreen Controller with 3-Tier User Access & Audit Trail |
| Data Storage | Internal Electronic Logging + USB Export |
| Cooling System | Imported Inverter Compressor (≥50% Energy Savings) |
| Safety | Independent Over-Temperature Protection Circuit |
| Door Design | Dual-door — outer solid insulated door + inner tempered glass door |
| Construction | Exterior: Powder-Coated Steel |
| Interior | Stainless Steel (304) with Built-in Glass Observation Window |
| Optional | Pin-type Micro Printer |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Labonce-3000GS-FC |
| Temperature Range | 10–65 °C |
| Humidity Range | 15–95 %RH |
| Chamber Volume | 3000 L |
| Internal Dimensions (W×D×H) | 1600×1100×1680 mm |
| External Dimensions (W×D×H) | 1810×1470×2270 mm |
| Power Consumption | 3.8 kW |
| Temperature Uniformity | ±1.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Fluctuation | ±2 %RH |
| Ambient Operating Temperature | +5 to +35 °C |
| Power Supply | 220 V, 50/60 Hz |
| Door Configuration | Dual-door (outer solid door + inner tempered glass door) |
| Compressor | Imported hermetic inverter compressor |
| Humidity Sensor | Imported capacitive humidity sensor |
| Control System | 7-inch color programmable touchscreen controller with real-time inverter output ratio display |
| User Access Control | Three-tier permission system (admin/operator/user) with username/password authentication |
| Audit Trail | Full operational and alarm history logging |
| Data Storage | Built-in electronic memory + optional thermal line printer |
| Safety Protections | Compressor overheat & overpressure protection, independent overtemperature cutoff, low-water & dry-burn prevention, phase-loss detection |
| Remote Alerting | Local audible alarm + SMS notification for temperature/humidity deviation and power failure |
| Insulation | High-density polyurethane foam (≥120 mm thickness, closed-cell structure) |
| Interior Material | Mirror-finish AISI 304 stainless steel |
| Exterior Finish | Powder-coated cold-rolled steel |
| Compliance References | ICH Q1A(R2), ICH Q5C, USP <1151>, Chinese Pharmacopoeia (2020 Edition), Annex 15 (Validation of Aseptic Processes), and FDA 21 CFR Part 11-ready architecture |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Labonce-320CGS-FC |
| Pricing | Upon Request |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Labonce-320GS-FC |
| Pricing | Upon Request |