Narishige
Filter
Showing 211–240 of 257 results
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UMM-3FC |
| Mounting Rod Diameter | 12 mm |
| Travel Range (Coarse) | X/Y/Z ±24 mm |
| Travel Range (Fine) | X/Y/Z ±6 mm |
| Fine Adjustment per Full Knob Rotation | 250 µm |
| Integrated Rotation Mechanism | Yes |
| Dimensions (W×D×H) | 143 × 92 × 158 mm |
| Weight | 510 g |
| Compatible Magnetic Base | GJ-8 (sold separately) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UP-23 |
| Dimensions | 125 × 17 mm (L × H) |
| Weight | 15 g |
| Pipette Bar Diameter | 7 mm |
| Angle Adjustment | Yes |
| Material | Corrosion-resistant engineering polymer and stainless steel components |
| Compliance | Designed for ISO/IEC 17025-compliant laboratory environments |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UPN-1 |
| Dimensions (L×H) | 80 × 12 mm |
| Weight | 8 g |
| Rod Diameter | 4 mm |
| Adjustability | Fixed-angle (non-rotatable), vertical clamping orientation |
| Mounting | Standard 4 mm diameter support rod compatible |
| Material | Stainless steel with electropolished finish |
| Compliance | Designed for ISO/IEC 17025-accredited laboratory environments |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UPN-10 |
| Dimensions | L80 × H12 mm |
| Weight | 8 g |
| Compatible Pipette Diameter | 1.0–1.2 mm |
| Material | High-grade corrosion-resistant plastic or metal |
| Surface Finish | Textured anti-slip grip |
| Angle Adjustment | Yes |
| Compatibility | Compact robotic manipulator series (e.g., MN-151, MX series) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UPN-C |
| Material | Corrosion-resistant polymer housing with stainless steel actuation mechanism |
| Weight | 8 g |
| Dimensions (L × H) | 80 mm × 12 mm |
| Pipette bar diameter compatibility | 4 mm |
| Adjustment | Manual angular tilt support |
| Compliance | Designed for ISO/IEC 17025-aligned laboratory workflows |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UPZ-1 |
| Dimensions | 125 mm (L) × 30 mm (H) |
| Weight | 15 g |
| Clamp Jaw Diameter | 7 mm |
| Compatible Pipette Outer Diameter | 1.0–1.5 mm |
| Mounting | Independent angular adjustment support |
| Recommended Compatibility | NARISHIGE YOU-series micromanipulators |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UPZ-23 |
| Dimensions (L × H) | 125 mm × 30 mm |
| Weight | 15 g |
| Clamp Bar Diameter | 7 mm |
| Compatible Pipette Outer Diameter | 2–3 mm |
| Material | Anodized Aluminum Alloy (Standard Configuration) |
| Mounting | Vertical Stand-Mountable via 8-mm Dovetail Slot |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | URC-1 |
| Material | Stainless Steel (AISI 304 equivalent) |
| Diameter | Ø6 mm |
| Length | 45 mm |
| Mass | 8 g |
| Thread Specification | M3 (Metric ISO 68-1, pitch = 0.5 mm) |
| Surface Finish | Passivated |
| Compliance | RoHS-compliant, ISO 9001-manufactured components |
| Packaging | Individual anti-static blister tray |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | URC-4 |
| Thread Type | M3 |
| Diameter | Ø6 mm |
| Length | 45 mm |
| Weight | 8 g |
| Material | Stainless Steel (AISI 304 or equivalent) |
| Surface Finish | Passivated & Precision Ground |
| Thread Pitch | 0.5 mm |
| Linear Displacement per Full Rotation | 0.5 mm |
| Typical Axial Resolution (with vernier-assisted operation) | ≤5 µm |
| Compliance | ISO 9001–certified manufacturing |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | USM-10 |
| Mounting Rod Diameter | 10 mm |
| Dimensions (W × D × H) | 35 × 25 × 47 mm |
| Weight | 55 g |
| Magnetic Type | Permanent Rare-Earth Magnet |
| Compliance | ISO 9001–certified manufacturing |
| Material | Anodized aluminum housing with neodymium iron boron (NdFeB) magnet assembly |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | USM-6 |
| Outer Diameter | Ø6 mm |
| Dimensions | 35 × 25 × 47 mm (W × D × H) |
| Weight | 40 g |
| Compatible Rod Diameter | Ø6 mm |
| Optional Extension Rod | URC-1 |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | UST-1 |
| Dimensions (W×D×H) | 105 × 30 × 55 mm |
| Weight | 130 g |
| Material | High-Precision Stainless Steel & Engineering Polymer |
| Mounting Interface | Standard M4 Threaded Holes (Symmetrical, 4×) |
| Key | Brand: Narishige |
|---|---|
| Origin | Japan |
| Model | UST-1 |
| Weight | 130 g |
| Dimensions (W×D×H) | 105 × 30 × 55 mm |
| Compatibility | Designed for MHW-3 hydraulic micromanipulators and compatible pipette/injection holders |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | UST-2 |
| Dimensions (Mount) | 110 × 34 × 71 mm |
| Weight (Mount) | 80 g |
| Compatible Base | NMN-21 Micromanipulator |
| Adjustment Axes | Pitch & Yaw (Dual-Axis Tilt) |
| Control Mechanism | Single-Knob Dual-Axis Locking |
| Accessory | 1.5 mm Hex Key (70 × 35 × 60 mm, 220 g) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | UST-3 |
| Dimensions (Joint) | W110 × D34 × H71 mm |
| Weight (Joint) | 80 g |
| Adjustment Range | Tilt ±15° (vertical plane only, scale-read), Swivel ±90° |
| Mounting Compatibility | NMN-21 holder interface |
| Included Accessory | 1.5 mm hex key |
| Accessory Dimensions | 52 × 52 × 55 mm |
| Accessory Weight | 120 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UST-3A |
| Dimensions | 70 × 42 × 35 mm (W × D × H) |
| Weight | 55 g |
| Compatibility | Designed for UST-3 universal joint base and EMM2/NMN-21 micromanipulator electrodes |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | UT-10 |
| Dimensions | 110 × 34 × 71 mm (W × D × H) |
| Weight | 80 g |
| Adjustment Range | ±15° tilt & swing |
| Angular Resolution | 5° scale markings |
| Compatibility | Narishige MO-209, MO-10, and other three-axis hydraulic micromanipulators |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | UT-R |
| Return Stroke Range | 10 mm |
| Control Unit Dimensions/Weight | 22 × 36 × 60 mm / 55 g |
| Drive Unit Dimensions/Weight | 20 × 60 × 45 mm / 85 g |
| Hydraulic Tubing Length | 0.9 m |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UX-10-10 |
| Dimensions (W×D×H) | 28 × 28 × 26 mm |
| Weight | 44 g |
| Compatible Rod Diameters | 10 mm × 10 mm |
| Material | Anodized Aluminum Alloy |
| Surface Finish | Precision-Machined, Flatness ≤ 5 µm |
| Mounting | M3 Threaded Holes (Standard) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UX-4-10 |
| Dimensions | 36 × 12 × 26 mm |
| Weight | 22 g |
| Compatible Rod Diameters | Ø4 mm × Ø10 mm |
| Material | Anodized Aluminum Alloy |
| Mounting | M2.6 Threaded Holes (Standardized for NARISHIGE Micromanipulators) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UX-6-10 |
| Material | Anodized Aluminum Alloy |
| Dimensions (W×D×H) | 29 × 12 × 31 mm |
| Weight | 12 g |
| Rod Diameter Configuration | 6 mm × 10 mm |
| Mounting | Standard M3 and M4 threaded holes + precision dowel pin holes |
| Surface Finish | Hard-anodized (Type II, 15–20 µm thickness) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | UX-6-6 |
| Dimensions (W×D×H) | 23 × 12 × 25 mm |
| Weight | 8 g |
| Compatible Rod Diameters | 6 mm × 6 mm |
| Material | Anodized Aluminum Alloy |
| Mounting | M2.6 × 0.45 threaded holes (standard for NARISHIGE micromanipulators) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | WR-6 |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Drive Unit Dimensions | 110 × 60 × 140 mm, 0.4 kg |
| Hydraulic Tubing Length | 0.9 m |
| Coarse Travel (X/Y/Z) | 18 mm each axis |
| Fine Travel (X/Y/Z) | 2 mm each axis |
| Full-Rotation Knob Resolution | 50 µm |
| Minimum Graduation | 0.2 µm |
| Included Accessories | B-8A Spherical Joint, H-13 Electrode Holder, P-1A Height Adjustment Plate, Universal Wrench |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | X-4 |
| Dimensions | 28 × 16 × 85 mm (W × D × H) |
| Weight | 153 g |
| Material | Precision-machined stainless steel |
| Rotational Range | Continuous 360° |
| Mounting Interface | Standard M3 and M4 threaded holes (compatible with Narishige micromanipulator arms and universal breadboard systems) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | X-4 |
| Dimensions | 28 mm (W) × 16 mm (D) × 85 mm (H) |
| Weight | 153 g |
| Rotation Range | 360° continuous horizontal rotation |
| Locking Mechanism | Mechanical friction-based angular fixation |
| Material | Anodized aluminum alloy |
| Mounting Interface | Standard M3 and M4 threaded holes (compatible with Narishige micromanipulator rails and universal breadboard systems) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | XenWorks |
| Type | Motorized Micromanipulator and Digital/Analog Microinjector System for Intracellular and Embryonic Applications |
| Power Supply | 110–230 V AC, 50/60 Hz |
| Compliance | Designed for research use only |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | Y-1 |
| Dimensions | 90 × 40 × 140 mm (W × D × H) |
| Weight | 750 g |
| Compatibility | Ø12 mm rods (e.g., MM-3, MMN-3 manipulators), AP bars of stereotaxic frames |
| Material | Precision-machined anodized aluminum alloy |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NMN-A |
| Compatibility | Designed for M-10, M-10F, and M-44 micromanipulators |
| Mounting Interface | Magnetic base (compatible with ferromagnetic microscope stages) |
| Tilt Range | 0–45° continuous adjustment |
| Orientation Control | Coaxial tilt alignment with electrode axis |
| Included Accessories | NMN-21 tilt adapter, hex key (2.5 mm), mounting hardware |
| Dimensions (mount only) | 65 × 95 × 20–80 mm (height adjustable) |
| Weight | 200 g (accessory set) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | NR-12 |
| Dimensions | 71 × 71 × 15 mm |
| Weight | 300 g |
| Compatible Manipulators | NMN-21, NMN-25 |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | SBP-2 |
| Load Capacity | 45 kg per Spring Isolator (2 included) |
| Vertical Isolation Frequency | ~5.5 Hz |
| Horizontal Isolation Frequency | ~5 Hz |
| Dimensions (L×W×H) | 520 mm × 400 mm × 43 mm |
| Weight (empty) | ~10 kg |