Narishige
Filter
Showing 1–30 of 257 results
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | BE-8 |
| Travel Range (Coarse X-axis) | 40 mm |
| Mounting Interface | 10 mm diameter rod |
| Dimensions (W×D×H) | 140 × 25 × 95 mm |
| Weight | 210 g |
| Type | Single-Axis Coarse Micromanipulator |
| Application | Stereotactic Auxiliary Positioning |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | CK-1 |
| Dimensions | 60 × 60 × 8 mm (W × D × H) |
| Weight | 55 g |
| Material | Borosilicate Glass Base, Silicone Rubber Gasket, Stainless Steel Clamping Fixture |
| Accessories Included | 100 pcs Glass Coverslips, Silicone Grease, Silicone Rubber Gasket |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | CT-1 |
| Outer Diameter | 2.0 mm |
| Inner Diameter | 0.9 mm |
| Material | Polytetrafluoroethylene (PTFE) |
| Length | 1 m (standard) |
| Compatible with | NARISHIGE Oil-Hydraulic Micromanipulators and Injection Holders |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | CT-4 |
| Material | 304 Stainless Steel (optional PTFE-lined) |
| Outer Diameter | 2.0 mm |
| Length per Coil | 1 m (standard) |
| Working Pressure | up to 20 MPa |
| Temperature Range | −20 °C to +150 °C |
| Surface Finish | Electropolished, Ra < 0.4 µm |
| Compliance | ISO 13485, RoHS, REACH, FDA-compliant variants available |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | EB-1 |
| Length | 115 mm (per bar) |
| Weight | 80 g (pair) |
| Compatibility | SN-series stereotactic frames |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | GD-1 |
| Type | Double-Bore Borosilicate Glass Capillary Tube |
| Material | High-Purity Borosilicate Glass (e.g., SCHOTT 8330 or equivalent) |
| Outer Diameter | 1.5 mm |
| Inner Diameter (each lumen) | 0.75 mm |
| Wall Thickness | 0.375 mm |
| Length | 100 mm |
| Sterilization Compatibility | Autoclavable (121°C, 20 min), Ethylene Oxide, and Gamma Irradiation |
| Packaging | Individually wrapped in sterile blister packs or bulk in Class 100 cleanroom bags |
| Compliance | ISO 13485–certified manufacturing, USP <381> compliant glass composition |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | GM-3 |
| Dimensions | W22 × D35 × H19 mm |
| Weight | 18 g |
| Anesthetic Gas Port OD | Ø4 mm |
| Material | Biocompatible, Non-Toxic Polymer |
| Intended Species | Rats (Rattus norvegicus) |
| Reusable | Yes |
| Regulatory Status | Research-Use-Only (RUO), Compliant with ISO 10993-5 Cytotoxicity Guidelines |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | HD-21 |
| Dimensions (W×D×H) | 127 × 38 × 52 mm |
| Weight | 105 g |
| Material | Corrosion-resistant anodized aluminum alloy |
| Compatibility | Designed for simultaneous mounting of two standard single-channel pipettes onto a three-axis hydraulic micromanipulator (e.g., MO-10, MN-151 series) |
| Alternate Use | Direct replacement for UT-10 universal joint |
| Included Tool | Hex key (2.0 mm) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | HI-9 |
| Compatible Capillary Outer Diameter | 1.0 mm |
| Weight | 18.6 g |
| Length | 155 mm |
| Includes | Silicone Rubber Gasket (HI01PK01), Cleaning Rod |
| Mounting Type | Standard Connector-Based Fixture with Rotatable HIR Clamp |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | HIC-1.2 |
| Compatible Instruments | HI-7, HI-9 Micromanipulators |
| Outer Diameter Compatibility | 1.2 mm |
| Seal Material | Silicone Rubber |
| Dimensions (Cap) | 20 × 5 × 5 mm |
| Weight | 1 g |
| Package Includes | Single cap with integrated silicone gasket (HI01PK01) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | HIC-1.5 |
| Compatible Instruments | HI-7, HI-9 Micromanipulators |
| Cap Outer Diameter | 1.5 mm |
| Silicone Gasket Included | HI01PK04 (20 × 5 × 5 mm, 1 g) |
| Key | Brand: NARISHIGE |
|---|---|
| Origin | Japan |
| Model | IM-H2 |
| Application | Dedicated mounting system for IM-9C pneumatic microinjector with 1 mm capillary pipettes |
| Includes | HI-7 micromanipulator mount, CT-1 PTFE tubing (1 m), Type III connector, HI01PK01 silicone rubber gasket (2.5 mm ID, pack of 10) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MAG-2 |
| Dimensions (W×D×H) | 87 mm × 136 mm × 58–72 mm |
| Weight | 232 g |
| Maximum Load Capacity | 0.5 kg |
| Longitudinal Tilt Range | ±10° |
| Transverse Tilt Range | ±15° |
| Accessories Included | CP-1 Chamber Plate (1 pc), CP-2 Chamber Plate (1 pc), Hex Key, Vinyl Sheet |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MAG-3 |
| Dimensions (W×D×H) | 108 mm × 152 mm × 109–130 mm |
| Weight | 1.7 kg |
| Maximum Load Capacity | 2 kg |
| Longitudinal Tilt Range | ±15° |
| Transverse Tilt Range | ±20° |
| Included Accessories | CP-1 Chamber Holder (1 pc), CP-2 Chamber Holder (1 pc), Vinyl Sheet (1 pc) |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MHW-3 |
| Drive Mechanism | Water-Hydraulic |
| Motion Resolution (Fine) | 0.2 µm (min. scale) |
| Coarse Travel Range (X/Y/Z) | 30 mm each |
| Fine Travel per Full Knob Rotation | 50 µm |
| Coarse Travel per Full Knob Rotation | ~4 mm |
| Control Unit Dimensions | 115 × 115 × 132 mm, 1.6 kg |
| Drive Unit Dimensions | 155 × 155 × 100 mm, 900 g |
| Hydraulic Tubing Length | 900 mm |
| Joint Type | Spherical Ball Joint (B-9 Standard) |
| Electrode Holder | H-12 Type |
| Included Accessories | Hex Key Wrench, Dual Adapter, Isolation Mounting Platform |
| Brand | NARISHIGE |
|---|---|
| Model | IM-300 |
| Origin | Japan |
| Operating Pressure Range | Up to 7 kgf/cm² (≈686 kPa) |
| Power Consumption | ~35 W |
| Dimensions | 425 × 205 × 90 mm (W × D × H) |
| Weight | 3.7 kg |
| Includes | Inlet/Outlet Tubing, Foot Switch, Silicone Gasket, Power Cord, HI-7 Microinjector Holder |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MM-3 |
| Gross Weight | 790 g |
| Dimensions (W×D×H) | 105 × 70 × 145 mm |
| Coarse Movement Range (X/Y/Z) | 30 / 20 / 35 mm |
| Fine Movement Range (X-axis only) | 7 mm |
| Fine Adjustment Resolution | 10 µm per click (250 µm per full rotation) |
| Electrode Holder | Compatible with H-1 holder and standard 1.2–1.5 mm diameter electrode shafts |
| Ergonomic Design | Dual-handled X/Z control, rack-and-pinion coarse drive, gravity-compensated tension adjustment |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MMN-33 |
| Axis Configuration | Single-axis coarse/fine adjustment (X-Z dual-hand control) |
| Coarse Travel Range | X 40 mm, Y 20 mm, Z 35 mm |
| Fine Travel Range | X 7 mm |
| Minimum Step Size | 10 µm |
| Maximum Rotation Speed | 250 µm/rev |
| Electrode Holder Compatibility | H-1 electrode holder included |
| Dimensions (W×D×H) | 105 × 70 × 155 mm |
| Weight | 880 g |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MMO-220A |
| Drive Principle | Oil-Hydraulic |
| Axis Configuration | Single-Axis (Z-axis fine adjustment) |
| Fine Adjustment Range | 10 mm |
| Minimum Step Resolution | 1 µm |
| Coarse Rotation per Full Turn | 250 µm |
| Control Unit Dimensions (W×D×H) | 65 × 88 × 93 mm, 630 g |
| Actuator Unit Dimensions (W×D×H) | 52 × 20 × 35 mm, 38 g |
| Hydraulic Tubing Length | 0.9 m |
| Compatibility | Mounts to standard 3-axis micromanipulators (e.g., MO-202, MN-4, or equivalent ball-joint platforms) |
| Operating Principle | Continuous hydrostatic pressure transmission via incompressible silicone oil |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MN-153 |
| Coarse Motion Range (X/Y/Z) | 25 mm / 20 mm / 25 mm |
| Fine Motion Range (X) | 8 mm |
| Micrometer Rotation per Full Turn | 500 µm |
| Dimensions (W×D×H) | 121 × 36 × 145 mm |
| Weight | 330 g |
| Mounting Interface | B-8B Spherical Joint, P-1A Height Adjustment Plate, H-7 Pipette Holder |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MO-10 |
| Actuation Principle | Oil-hydraulic displacement amplification |
| Control Mechanism | Drum-type rotary actuator |
| Total Travel Range | 10 mm |
| Fine Adjustment per Full Knob Rotation | 500 µm |
| Minimum Graduation | 2 µm |
| Hydraulic Tubing Length | 1.5 m |
| Control Unit Dimensions (W×D×H) | 65 × 88 × 93 mm |
| Control Unit Weight | 630 g |
| Drive Unit Dimensions (W×D×H) | 30 × 20 × 125 mm |
| Drive Unit Weight | 50 g |
| Mounting Compatibility | Standard 3-axis manual micromanipulator rails (e.g., Narishige MMO-2, MN-4, or equivalent) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-903 |
| Coarse Adjustment Range (Z-axis) | 40 mm |
| Fine Adjustment Range (Z-axis) | 10 mm |
| Step Resolution | 300 µm |
| Dimensions (W×D×H) | 34 × 30 × 81 mm |
| Weight | 33 g |
| Includes | Mounting Screws, Hex Key |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-903B |
| Fine Adjustment Range (Z-axis) | 10 mm |
| Micrometer Knob Travel per Full Rotation | 300 µm |
| Dimensions (W×D×H) | 11 × 4 × 20 mm |
| Weight | 2 g |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-95 |
| Construction | Acrylic XY stage, Stainless steel components |
| Drive Mechanism | Hydraulic (non-motorized, vibration-free) |
| Coarse Z Travel | 50 mm |
| Fine X/Y/Z Travel | 18 mm / 18 mm / 10 mm |
| Minimum Step Size | 2 µm (fine adjustment), 500 µm (coarse toggle) |
| Control Unit Dimensions | 65 × 88 × 93 mm, 630 g |
| Drive Unit Dimensions | 60 × 60 × 150 mm, 100 g |
| Hydraulic Tubing Length | 1.5 m |
| Compatible Accessories | MO-903E Chamber, Chamber Cap, Stainless Steel Guide Tube (Ø0.7 × 60 mm), Threaded Rods, Mounting Screws, Washers, Leak-proof Sealing Kit, Electrode Holder with Deep Groove |
| Application | Stereotactic electrophysiology in non-human primates (e.g., macaques) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-97 |
| Drive Type | Oil-hydraulic |
| Max. Z-axis Travel (Coarse) | 50 mm |
| X/Y Travel | 18 mm each |
| Z-axis Fine Adjustment Range | 30 mm |
| Fine Adjustment Resolution | 2 µm per scale division |
| Full Knob Rotation Displacement | 500 µm |
| Guide Tube | Stainless Steel, Ø0.7 × 60 mm |
| Hydraulic Tubing Length | 1.5 m |
| Control Unit Dimensions | 65 × 88 × 93 mm |
| Control Unit Weight | 630 g |
| XY Stage Material | Acrylic |
| Mounting Method | Stereotaxic Frame-Compatible Direct Head Fixation |
| Compliance | Designed for non-human primate neurophysiology studies under GLP-aligned experimental protocols |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | MO-97A |
| Movement Range (Z-axis) | 30 mm |
| Movement Range (X-axis) | 13 mm |
| Movement Range (Y-axis) | 18 mm |
| Coarse Z-Travel | 50 mm |
| Fine Adjustment per Full Knob Rotation | 500 µm |
| Minimum Scale Division | 2 µm |
| Control Unit Dimensions | 65 × 88 × 93 mm |
| Weight | 630 g |
| Guide Tube | Stainless Steel, Ø0.7 × 60 mm |
| Hydraulic Tubing Length | 1.5 m |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | MP-2 |
| Motion Range (Coarse) | X 60 mm, Z 50 mm |
| Motion Range (Fine) | X 4 mm, Z 4 mm, Y 40 mm |
| Fine Adjustment Resolution | 10 µm per click (X/Z/Y) |
| Coarse Knob Travel per Full Rotation | X/Z 250 µm, Y 500 µm |
| Pivot & Tilt Functionality | Integrated |
| Electrode Holder Included | H-1 |
| Dimensions (W×D×H) | 150 × 130 × 210 mm |
| Weight | 4.8 kg |
| Brand | Narishige |
|---|---|
| Origin | Japan |
| Model | AP-13-2/3 |
| Dimensions (AP-13-2) | 64 × 26 × 15 mm, 28 g |
| Dimensions (AP-13-3) | 64 × 26 × 12 mm, 27 g |
| Compatibility | AP-13-2 fits ø7 mm ball-joint mounts (e.g., B-9) |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | B-8B/C |
| Ball Rotation Range | ±15° (30° total angular deflection) |
| Mounting Compatibility | Universal for micromanipulator arms and pipette holders |
| Body Dimensions (B-8B) | 108 mm × 20 mm × 36 mm, 47 g |
| Body Dimensions (B-8C) | 88 mm × 20 mm × 36 mm, 45 g |
| Material | High-strength anodized aluminum alloy with precision-ground stainless steel ball core |
| Sealing | Static elastomeric O-ring interface |
| Operating Temperature Range | –10 °C to +60 °C |
| Max. Static Load Capacity | 2.5 kg (axial), 1.2 kg (lateral) |