Constant Temp/Heating/Drying Equipment
Filter
Showing 2461–2490 of 3282 results
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China Market) |
| Model | LB Series |
| Pricing | Available Upon Request |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SBO-1000B |
| Temperature Range | 40–300 °C (operational range) |
| Temperature Uniformity | ±2% of setpoint |
| Temperature Stability | ±0.1 °C |
| Internal Dimensions (W×D×H) | 140 × 60 × 120 cm |
| External Dimensions (W×D×H) | 165 × 75 × 182 cm |
| Capacity | 1000 L |
| Power Rating | 11 kW |
| Shelving | 12 adjustable stainless steel trays |
| Construction | Interior – 304 stainless steel |
| Heating System | Top-mounted tubular heaters |
| Air Circulation | Horizontal forced-air system with rear-mounted centrifugal blower |
| Control System | Microprocessor-based PID controller with dual LED display (setpoint & actual temperature) |
| Sensor | Type K thermocouple |
| Insulation | High-density mineral wool (≥100 mm thickness) |
| Safety Features | Independent EGO overtemperature cut-off, motor overload protection, door-interlocked power cutoff, robust mechanical latch |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-sourced) |
| Model | SMF-303 |
| Instrument Type | Box Furnace |
| Max Temperature | 1700 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power Rating | 11 kW |
| Time to Max Temperature | 60 min |
| Heating Method | Imported High-Performance Heating Elements |
| Internal Chamber Dimensions (W×D×H) | 30 cm × 30 cm × 30 cm |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Manufactured in China (Taiwan) |
| Model | SOH-150F |
| Price Range | USD 1,150 – 2,150 |
| Instrument Type | High-Temperature Drying Oven |
| Temperature Range | 60°C to 600°C |
| Temperature Uniformity | ±1.5% of setpoint |
| Temperature Fluctuation | ±1°C |
| External Dimensions | W870 × D650 × H960 mm |
| Internal Chamber Dimensions | W600 × D500 × H500 mm |
| Chamber Volume | 150 L |
| Heating Method | Forced-air convection with centrifugal blower |
| Inner Chamber Material | SUS430 stainless steel |
| Outer Casing | Galvanized steel with powder-coated finish |
| Temperature Controller | Microprocessor-based PID controller with dual-digit LED display and SSR output |
| Safety Features | Independent over-temperature protection, thermal cut-off, heater open-circuit detection, power failure alarm, and self-diagnostic function |
| Power Supply | 220 V, 50/60 Hz |
| Rated Current | 27 A |
| Net Weight | Approx. 90 kg |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Manufactured in Taiwan |
| Model | SOH-27C |
| Instrument Type | Precision Drying Oven |
| Temperature Range | Ambient to 300 °C |
| Temperature Fluctuation | ±0.1 °C |
| External Dimensions | 420 × 500 × 650 mm |
| Internal Chamber Dimensions | 300 × 300 × 300 mm |
| Chamber Volume | 27 L |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1% of setpoint |
| Heating Rate | <3 min to 70 °C, <12 min to 150 °C, <27 min to 250 °C |
| Door-Open Recovery (30 s) | <3 min to 70 °C, <2.5 min to 150 °C, <5 min to 250 °C |
| Control System | Touchscreen PID Controller with Adjustable Parameters |
| Timer Range | 1–99 h 59 min |
| Vent/Testing Port | Ø50 mm (top & left) |
| Power Supply | 220 V AC |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Production Status | China-assembled with imported core components |
| Model | SV-64B |
| Price Range | USD 4,200 – 7,000 |
| Instrument Category | Vacuum Drying Oven |
| Temperature Range | Ambient +40°C to 200°C |
| Temperature Uniformity | ±0.05°C |
| External Dimensions (W×D×H) | 600×550×850 mm |
| Internal Chamber Dimensions (W×D×H) | 400×400×400 mm |
| Chamber Volume | 64 L |
| Heating Power | 1500 W |
| Temperature Control System | Microprocessor-based PID controller with auto-tuning |
| Display & Interface | Touchscreen LED digital display |
| Sensor Type | Type K thermocouple |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Casing | Galvanized steel with powder-coated finish |
| Observation Window | High-temperature borosilicate safety glass |
| Insulation | High-density rock wool (thermal conductivity ≤0.04 W/m·K) |
| Vacuum Gauge Range | 0–760 mmHg (absolute) |
| Sealing System | High-temperature silicone gasket with dual-point door compression |
| Safety Features | Over-temperature cutoff, heater open-circuit detection, power failure recovery, real-time fault diagnostics |
| Optional Accessories | Nitrogen purge inlet valve, mass flow controller, vacuum pump interface kit, custom high-temp chamber (up to 300°C or 400°C on request) |
| Origin | Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | China (Domestic Supply Chain) |
| Model | WB-30 |
| Price Range | USD 720–1,430 (FOB) |
| Instrument Category | Constant-Temperature Circulating Bath |
| Circulation Mode | Internal Recirculation Only |
| Temperature Range | Ambient +5°C to 100°C |
| Control System | Microprocessor-Based PID Controller with Touch Interface |
| Temperature Display | LED, 0.1°C Resolution |
| Temperature Accuracy | ±0.05°C |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Heater | Stainless Steel Tubular Element |
| Circulation Pump | Stainless Steel Impeller Pump |
| Uniformity | ≤±0.1°C across Working Volume |
| Power Supply | 220 VAC, 50/60 Hz |
| Capacity | 30 L |
| Internal Dimensions (W×D×H) | 500 × 300 × 200 mm |
| External Dimensions (W×D×H) | 570 × 365 × 380 mm |
| Working Chamber Floor Area | 400 × 300 mm |
| Heating Power | 2000 W |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model Range | SNOL 4/900, 7.2/900, 12/900, 15/900 |
| Heating Configuration | Exposed heating elements (for 1100 °C and 1300 °C models) |
| Chamber Volume | 4–15 L |
| Max Operating Temperature | 900, 1100, 1200, or 1300 °C |
| External Finish | RAL 7035 textured powder coating |
| Construction | Stainless steel outer casing with solid ceramic chamber lining |
| Thermal Insulation | High-purity refractory ceramic fiber board and firebrick |
| Control System | Microprocessor-based PID temperature controller with digital timer, over-temperature protection, and process monitoring viewport (Ø35 mm, rated to 1100 °C) |
| Connectivity | RS232 / RS485 / USB interface for data logging and remote monitoring |
| Compliance | Designed to support GLP/GMP-aligned thermal processing workflows |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model Series | SNOL 1100/1300/1600 |
| Temperature Range | 1100–1600 °C |
| Temperature Uniformity | ±0.5 °C |
| Internal Chamber Dimensions (W×D×H) | 300×450×600 mm |
| External Dimensions (W×D×H) | 740×880×1250 mm |
| Heating Power | Up to 8.4 kW |
| Chamber Volume | Up to 80 L |
| Net Weight | Up to 170 kg |
| Control Interface | RS232 / RS485 / USB |
| Safety Features | Overtemperature Protection, Audible Alarm, Process Monitoring Window (Ø35 mm, rated to 1100 °C) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model Series | SNOL 200/250/300/350 |
| Temperature Range | 200–350 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions (W×D×H) | 2200 × 2400 × 1990 mm |
| Internal Chamber Dimensions (W×D×H) | 1200 × 1800 × 1000 mm |
| Air Circulation | Horizontal or Vertical Forced Convection |
| Construction | Stainless Steel Inner Chamber |
| Control System | Microprocessor-Based PID Temperature Controller |
| Surface Finish | RAL 7035 Powder-Coated Exterior (Black Frame) |
| Standard Accessories | Two Adjustable Stainless Steel Shelving Units |
| Compliance | Designed for GLP/GMP-aligned thermal processing environments |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SNOL LXC04 1250 Series |
| Instrument Type | Horizontal Tube Furnace |
| Max Operating Temperature | 1250 °C |
| Chamber Volume | 0.2–0.5 L |
| Tube Inner Diameter | 35–58 mm |
| Tube Length (Heated Zone) | 190 mm |
| External Dimensions (W×D×H) | 500×550×525 mm |
| Power Rating | 3.7 kW |
| Net Weight | 38 kg |
| Control Interface | RS232 / RS-485 / USB |
| Temperature Uniformity | ±5 °C (within heated zone) |
| Heating/Cooling Rate | Programmable, up to 20 °C/min (heating), natural convection cooling |
| Thermal Insulation | High-purity alumina fiber ceramic insulation |
| Temperature Sensor | Type S thermocouple (calibration traceable to NIST standards) |
| Compliance | CE-marked, conforms to IEC 61000-6-3 (EMC), IEC 61000-6-2 (immunity), EN 60519-1 (safety for industrial electroheating equipment) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 20–900 °C |
| Temperature Uniformity | ±0.5 °C |
| Internal Chamber Dimensions (W×L×H) | 340 × 390 × 550 mm (SNOL 75/550 LHN02) / 150 × 150 × 450 mm (SNOL 10/900 LC02) |
| External Dimensions (W×L×H) | 870 × 660 × 850 mm (SNOL 75/550 LHN02) / 860 × 750 × 800 mm (SNOL 10/900 LC02) |
| Max Power Consumption | 6 kW (SNOL 75/550 LHN02) / 4.5 kW (SNOL 10/900 LC02) |
| Net Weight | 100 kg (SNOL 75/550 LHN02) / 120 kg (SNOL 10/900 LC02) |
| Chamber Volume | 75 L (SNOL 75/550 LHN02) / 10 L (SNOL 10/900 LC02) |
| Control System | Microprocessor-based PID controller with programmable ramp-soak profiles |
| Safety Compliance | Over-temperature cut-off, thermal insulation per EN 60519-1, CE-marked |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SNOL 1100/1300 Series |
| Instrument Type | Box-Type Muffle Furnace |
| Heating Element Configuration | Vacuum-Embedded Fibre Insulation (≤1100 °C) / Ceramic Tube-Mounted Elements (≤1300 °C) |
| Control System | Microprocessor-Based PID Temperature Controller |
| Chamber Lining | High-Purity Refractory Ceramic Fibre with Low Thermal Mass |
| Floor Plate | Solid Alumina Ceramic Hearth Plate |
| Surface Finish | RAL 7035 Textured Powder Coating |
| Safety Features | Dual Independent Over-Temperature Protection, Automatic Cut-Off |
| Optional Interfaces | RS232 / RS-485 / USB for Data Logging and Remote Monitoring |
| Compliance | Designed to support GLP/GMP-aligned thermal process validation workflows |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SNOL 300 Series |
| Temperature Range | 20–300 °C |
| Temperature Uniformity | ±0.5 °C |
| Internal Dimensions | 1000 × 500 × 860 mm |
| External Dimensions | 1200 × 930 × 1200 mm |
| Chamber Volume | 420 L |
| Heating Power | 6.2 kW |
| Construction | Stainless Steel Interior |
| Air Circulation | Horizontal Forced Convection |
| Compliance | CE, EN 61000-6-3, EN 61000-6-4, IEC 61010-1 |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SNOL 350 Series |
| Temperature Range | 20–350 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions | 685 × 625 × 615 mm |
| Internal Chamber Dimensions | 390 × 445 × 390 mm |
| Chamber Volume | 67 L |
| Power Consumption | 2.2 kW |
| Construction | Stainless Steel or Mild Steel Interior |
| Air Circulation | Forced-air (optional natural convection) |
| Control System | Microprocessor-based PID temperature controller with digital display |
| Safety Features | Independent over-temperature protection, audible alarm, door seal integrity monitoring |
| Compliance | Designed to meet general laboratory safety and thermal stability requirements per IEC 61010-1 and EN 60529 (IP20) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Instrument Type | General-Purpose Forced-Air Drying Oven |
| Model | SNOL N*200 |
| Temperature Range | 20–200 °C |
| Temperature Uniformity | ±5 °C |
| External Dimensions | 1500 × 960 × 1715 mm |
| Internal Chamber Dimensions | 500 × 400 × 1200 mm |
| Chamber Configuration | Dual independent stainless steel chambers (2 × 240 L) |
| Power Consumption | 24 kW |
| Net Weight | 450 kg |
| Air Circulation | Horizontal forced convection with adjustable fan speed control |
| Heating System | Embedded resistive elements with PID-controlled microprocessor regulator |
| Construction | Exterior powder-coated steel (RAL 7035), interior 304 stainless steel chambers, high-efficiency ceramic fiber insulation |
| Compliance | Designed to meet general laboratory safety and thermal stability requirements per IEC 61010-1 |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | SNOL200/200 SP11 |
| Temperature Range | 20–200 °C |
| Temperature Uniformity | ±0.5 °C |
| Internal Dimensions (W×D×H) | 710 × 610 × 460 mm |
| External Dimensions (W×D×H) | 1040 × 780 × 775 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection with Adjustable Fan Speed |
| Rated Power | 22 kW |
| Net Volume | 200 L |
| Weight | 77 kg |
| Compliance | CE, IEC 61010-1, EN 60529 (IP20) |
| Brand | SOPTOP |
|---|---|
| Model | DC-1006 / DC-2006 / DC-3006 / DC-4006 / DC-8006 |
| Origin | Shanghai, China |
| Bath Volume | 20 L |
| Temperature Range | −5 °C to 95 °C |
| Temperature Stability | ±0.05 °C |
| Control Mode | Refrigeration & Heating Dual-Function |
| Circulation Type | Internal & External Recirculation |
| Display Resolution | 0.1 °C |
| Construction | Stainless Steel Inner Tank & Housing |
| Insulation | High-Density Polyurethane Foam |
| Pump Flow Rate (≥20 L models) | 10 L/min |
| Pump Flow Rate (<20 L models) | 8 L/min |
| Refrigeration System | Twin-Compressor Cascade Design |
| Sensor | Imported Pt100 RTD |
| Handle | Foldable Dual-Side Ergonomic Handles |
| Mobility | Heavy-Duty Locking Casters (DC-30 Series & ≤−40 °C Models) |
| Brand | SOPTOP |
|---|---|
| Origin | Shanghai, China |
| Model | DCY-0506 |
| Bath Volume | 6 L |
| Temperature Range | −5 °C to 95 °C |
| Temperature Stability | ±0.05 °C |
| Display Resolution | 0.1 °C |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Pump Flow Rate | 8 L/min |
| Inner Tank Dimensions (W×D×H) | 150 mm × 150 mm × 150 mm |
| Overall Dimensions (W×D×H) | 340 mm × 405 mm × 670 mm |
| Material | Stainless Steel (Inner Bath & Chamber) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Domestic Origin | Yes |
| Model | SP-30 |
| Price Range | USD 28,000 – 42,500 |
| Batch Capacity | 30–1000 mL per cycle |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Integrated oil-free air compressor (4.2 m³/h, 0.2 kW, <50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), 686 Pa static pressure |
| Jet Cleaner (Needle Sweeper) | Pneumatically actuated, frequency adjustable (2.3 bar internal supply) |
| Total Power | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-300 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (empty) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow | 0–330 m³/h, max. static pressure 686 Pa |
| Atomization Airflow | 5.5 m³/min |
| Jet Cleaner (Needle) Frequency | Variable, with integrated 2.3 bar compressed air supply |
| Power Input | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Control System | Full-color LCD touchscreen interface with real-time digital display of drying chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Dual-mode Capability | Optional conversion to conventional hot-air spray dryer configuration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SP-3000 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL/batch |
| Spray Freezing Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Integrated oil-free air compressor (0.2 kW, 4.2 m³/h) |
| Drying Air Flow Rate | 0–330 m³/h (max), 686 Pa max static pressure |
| Condenser Cooling | Built-in air-cooled hermetic compressor system |
| Control System | Full-color LCD touchscreen (bilingual: English/Chinese), real-time display of drying chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Needle Purge (Jet Cleaner) | Pneumatically actuated, adjustable frequency (2.3 bar internal supply) |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Noise Level | < 50 dB(A) |
| Dual-Mode Capability | Optional retrofit to conventional hot-air spray dryer configuration |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-3000 |
| Price Range | USD 28,000 – 42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freeze Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, < 50 dB(A)) |
| Drying Air Flow | 0–330 m³/h (max), 686 Pa (max static pressure) |
| Nebulizer (Needle Cleaner) | Pneumatically actuated, frequency-adjustable (2.3 bar internal supply) |
| Condenser Cooling | Integrated air-cooled hermetic refrigeration system |
| Control Interface | Full-color LCD touchscreen (bilingual: English/Chinese), digital display of chamber temperature, peristaltic pump speed, fan frequency, needle purge frequency, and chamber pressure |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | SP-300000 |
| Price Range | USD 28,000–42,500 |
| Processing Capacity | 30–1000 mL per batch |
| Spray Freeze Temperature | ≤ −15 °C |
| Cold Trap Temperature | ≤ −60 °C |
| Ultimate Vacuum Pressure (Empty Chamber) | < 20 Pa |
| Spray Pressure Range | 2–5 bar (adjustable) |
| Compressed Air Supply | Built-in oil-free air compressor (4.2 m³/h, 0.2 kW, noise < 50 dB(A)) |
| Drying Air Flow Rate | 0–330 m³/h (max), max static pressure 686 Pa |
| Jet Cleaner (Needle Probe) Frequency | Adjustable, integrated 2.3 bar air supply |
| Refrigeration System | Internal air-cooled hermetic compressor |
| Vacuum Connection | Standard ISO-KF 25/40 flange |
| Control Interface | 7-inch color LCD touchscreen, bilingual (English/Chinese), real-time display of drying chamber temperature, peristaltic pump speed, fan frequency, needle probe frequency, and chamber pressure |
| Power Supply | 9 kW, 380 V, 50 Hz |
| Dimensions (L×W×H) | 1150 × 770 × 1350 mm |
| Dual-Mode Capability | Upgradable to conventional hot-air spray dryer configuration |
| Brand | SRD |
|---|---|
| Origin | Shanghai, China |
| Model | HRC |
| Instrument Type | Constant-Temperature Heating Bath |
| Number of Sample Positions | 24 (arranged in 4 zones × 6 positions) |
| Temperature Range | Ambient to 135 °C |
| Temperature Stability | ±1 °C |
| Vessel Compatibility | Standard Glass Vials with Magnetic Stir Bars |
| Brand | SRD |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JWC-32C1 |
| Instrument Type | Circulating Constant-Temperature Bath |
| Circulation Mode | External Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 42 L |
| Temperature Range | 0–80 °C |
| Temperature Stability | ±0.01 °C |
| Temperature Resolution | 0.01 °C |
| Heating Power | 1 kW |
| Cooling Capacity | 220 kcal/h |
| Cold Source Output Temp (short-circuit) | –15 °C |
| Input Voltage | 220 V AC, 50 Hz |
| Dimensions (Bath Unit) | 75 × 26/38 (with/without backlight box) × 61 cm (L×W×H) |
| Internal Chamber | 64 × 19.5 × 34 cm (L×W×H) |
| Viewing Window | 47.5 × 27 cm (L×H) |
| Brand | SRD |
|---|---|
| Origin | Shanghai, China |
| Model | JWC-52B1 |
| Instrument Type | Circulating Constant-Temperature Bath |
| Circulation Mode | Internal Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 30 L |
| Temperature Range | 0–70 °C |
| Temperature Stability | ±0.01 °C |
| Temperature Resolution | 0.01 °C |
| Temperature Uniformity | ±0.01 °C (within ambient ±30 °C) |
| Refrigeration Capacity | 220 kcal/h |
| Heating Power | 1 kW |
| Power Supply | 220 V, 10 A, 50 Hz |
| Voltage | 220 V / 380 V |
|---|---|
| Power | 4000 W / 8000 W |
| Max. Operating Temperature | 1300 °C |
| Chamber Dimensions | 250 × 150 × 100 mm (SRJX-4-13) / 500 × 200 × 180 mm (SRJX-8-13) |
| Heating Element | Silicon Carbide Rod (SiC) or Molybdenum Disilicide (MoSi₂) |
| Construction | Steel Enclosure with Electrostatic Powder Coating |
| Insulation | Refractory Ceramic Fiber Blanket |
| Compliance | CE-marked design principles, compatible with ISO/IEC 17025 laboratory environmental control requirements |
| Voltage | 220 V |
|---|---|
| Power Rating | 6000 W |
| Maximum Operating Temperature | 1300 °C |
| Chamber Dimensions | 250 × 150 × 100 mm (L×W×H) |
| Heating Element | Silicon Carbide (SiC) Rods |
| Construction | Steel Enclosure with Electrostatic Powder Coating |
| Insulation | Refractory Ceramic Fiber Blanket |
| Compliance | Designed for General Laboratory Use per ISO/IEC 17025 Supporting Environments |