Drying Oven
Filter
Showing 481–510 of 802 results
| Brand | LabCompanion |
|---|---|
| Model | CS101-E |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 300°C) | ≤70 min |
| Control System | Microprocessor-based PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW (CS101-1EBN), 2.5 kW (CS101-2EBN), 3.0 kW (CS101-3EBC) |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E |
| Pricing | Upon Request |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | PID with LED Digital Display |
| Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Heating Element | Nickel-Chromium Alloy |
| Air Circulation | Forced Convection via Centrifugal Blower |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | Ultra-Fine Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber |
| Viewing Window | Double-Layer High-Temperature Tempered Glass |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| External Dimensions (W×D×H) | 610×575×905 mm |
| Net Volume | 72 L |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out Circuit Breaker |
| Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E |
| Pricing | Upon Request |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control Method | PID with PT100 Sensor |
| Display | LED Digital (Set & Actual Temp) |
| Timer Range | 0–999 min |
| Interior Material | SUS304 Mirror-Finish Stainless Steel (BN variant) or Pre-treated Cold-Rolled Steel (EN variant) |
| Insulation | Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Heat-Resistant Tempered Glass |
| Air Circulation | Centrifugal Blower with Condenser Motor |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Internal Dimensions (W×D×H) | 450×400×400 mm |
| Internal Volume | 72 L |
| Compliant With | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | CS101-E Series (CS101-1EBN / CS101-2EBN / CS101-3EBC) |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | Microprocessor-based PID with Auto-Tuning |
| Temperature Sensor | Industrial-grade PT100 Platinum Resistance Thermometer |
| Chamber Liner | SUS304 Mirror-Finish Stainless Steel (BN models) or Pre-treated Cold-Rolled Steel (EN models) |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Safety Features | Independent Over-Temperature Protection, Over-Current Circuit Breaker |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | CS101-E Series (CS101-1EBN / CS101-2EBN / CS101-3EBC) |
| Temperature Range | R.T.+10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate (to 200°C) | ≤70 min |
| Control System | Microprocessor-based PID with Auto-Tuning |
| Temperature Sensor | Industrial-grade PT100 Platinum Resistance Thermometer |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Centrifugal Blower with Adjustable Airflow |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel (BN models) or Pre-Painted Cold-Rolled Steel with High-Temp Silver Paint (EN models) |
| Outer Casing | Powder-Coated Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber (≥100 mm thickness) |
| Viewing Window | Double-Layer Tempered Heat-Resistant Glass |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Exhaust Port | Φ45 mm × 1 (rear-mounted) |
| Safety Features | Independent Over-Temperature Cut-Off, Thermal Fuse, and Circuit Breaker with Over-Current Protection |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW / 2.5 kW / 3.0 kW |
| Internal Volume | 72 L / 137.5 L / 234 L |
| Standard Accessories | 2 Stainless Steel Shelving Plates + 4 Adjustable Shelf Supports + Full Technical Manual |
| Optional Upgrades | Programmable Ramp-Soak Controller, RS485 Modbus Interface, Cable Entry Ports, Additional Shelving Kits |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 20L |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions (W×D×H) | 1195×890×2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940×700×1400 mm |
| Chamber Material | Stainless Steel (AISI 304) or Galvanized Steel |
| Heating Method | Forced-Air Convection / Thermal Oil Heating |
| Power Supply | AC 220 V, 50 Hz (Internal Heating) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C at Setpoint |
| Programmable Timer Range | 1–9999 minutes/hours |
| Optional Controller | Intelligent LCD Programmable Controller (‘D’ Series) |
| Brand | LabCompanion |
|---|---|
| Model | DGF |
| Type | Forced-Convection Constant-Temperature Drying Oven |
| Temperature Range | R.T.+10°C to 300°C (DGF 3002B–3006B) |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C (≤±1°C for higher-range models) |
| Heating Method | Nickel-Chromium Alloy Heaters |
| Control System | Microprocessor-Based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Internal Volume | 110–640 L |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Construction | Inner Chamber – SUS304 Stainless Steel (BN variants) or Pre-treated Cold-Rolled Steel (N variants) |
| Safety Features | Independent Over-Temperature Protection Circuit |
| Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Interface, Chart Recorder, Additional Shelves, Observation Window, Φ50 Cable Port, Casters (4), Two Standard Shelves, User Manual |
| Brand | LabCompanion |
|---|---|
| Model | DGG-9030A |
| Type | General-Purpose Forced-Convection Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±1°C |
| Temperature Resolution | 0.1°C |
| Heating Rate | 1.0–3.0°C/min |
| Timer Range | 1–9999 min |
| Inner Chamber Material | Stainless Steel (Austenitic 304, Argon Arc Welded) |
| Outer Casing | Cold-Rolled Steel with Epoxy Powder Coating |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | High-Temperature-Resistant Imported Centrifugal Blower + Optimized Tangential Airflow Duct Design |
| Operating Environment | 5–35°C ambient, ≤85% RH |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | DHG-9000 |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | RT + 10 °C to 300 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Chamber Material | Stainless Steel (AISI 304 equivalent, 1Cr18Ni9Ti) or Galvanized Steel |
| Heating Method | Forced-air convection with axial fan circulation and auxiliary oil-heating option |
| Power Supply | Internal heating: AC 220 V, 50 Hz |
| External heating | AC 380 V, 50 Hz |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.5 °C at setpoint |
| Timer Range | 1–9999 min/h |
| Optional Controller | “D”-series programmable LCD controller with multi-step ramp-soak profiles |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Capable) |
| Type | General-Purpose Forced-Convection Drying Oven |
| Temperature Range | RT +10°C to 300°C |
| Temperature Uniformity | ±0.5°C (at 100°C, steady state) |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Chamber Material | 1Cr18Ni9Ti Stainless Steel (AISI 304 equivalent) |
| Heating Method | Horizontal Forced-Air Circulation with Dual-Side Heaters |
| Power Supply | AC 220 V / 50 Hz (Internal Heating), AC 380 V / 50 Hz (Optional External Heating Circuit) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (measured at center point per ISO 17025-compliant validation protocol) |
| Timer Range | 1–9999 minutes/hours |
| Controller | Standard PID Digital Controller (D-Series Optional: Programmable LCD Controller with Ramp-Soak Profiles & Data Logging) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9005 |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT + 10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions (W×D×H) | 1195 × 890 × 2060 mm |
| Internal Chamber Dimensions (W×D×H) | 940 × 700 × 1400 mm |
| Interior Material | Stainless Steel (1Cr18Ni9Ti) or Galvanized Steel |
| Heating Method | Forced-Air Convection with Optional Thermal Oil Heating |
| Power Supply | AC 220 V, 50 Hz (Internal Heating) |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C |
| Timer Range | 1–9999 min/h |
| Programmable Controller Option | “D” Series LCD Microprocessor-Based Controller |
| Key | Brand: LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DHG-9005D |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| Internal Dimensions (W×D×H) | 300×280×350 mm |
| External Dimensions (W×D×H) | 445×490×700 mm |
| Chamber Material | Stainless Steel (1Cr18Ni9Ti) |
| Heating Method | Forced-Air Circulation |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Resolution | 0.1°C |
| Timer Range | 1–9999 min/h |
| Controller Type | Intelligent Programmable LCD Controller |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Construction | Cold-rolled steel outer shell with epoxy powder coating |
| Interior options | SUS304 stainless steel (BN variant) or high-temp silver-painted cold-rolled steel (N variant) |
| Insulation | High-density polyurethane foam + glass fiber composite |
| Door Seal | Eco-friendly silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cut-off, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GZX-14 |
| Pricing | Upon Request |
| Internal Dimensions (W×H×D) | 450×400×400 mm / 550×500×500 mm / 650×600×600 mm |
| External Dimensions | 610×905×575 mm / 710×1025×675 mm / 810×1175×775 mm |
| Construction | Exterior – Powder-Coated Steel |
| Insulation | High-Efficiency Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced Convection with Optimized Outlet Design |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Uniformity | ±1.5°C at setpoint |
| Temperature Stability | ±1.0°C |
| Control System | Microprocessor-Based PID Controller with Dual Display (Setpoint & Actual), Auto-Tuning Function |
| Safety Protections | Dual-Stage Overtemperature Protection (ALM1 Visual/Audible Alert + ALM2 Cut-off), MCCB Overload Protection, Ceramic Fuse, Non-Fuse Circuit Breaker, Post-Heating Fan Delay Shutdown |
| Power Supply | 3-phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX1 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10→300°C), ≤80 min (RT+20→450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Control System | Microprocessor-based PID controller with auto-tuning |
| Temperature Sensor | Industrial-grade PT100 platinum resistance thermometer |
| Display | LED digital display for both setpoint and actual temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-density polyurethane foam + glass fiber |
| Door Seal | Environmentally compliant silicone rubber gasket |
| Heating Element | Ni-Cr alloy wire heater |
| Safety Features | Independent over-temperature protection, thermal cutoff fuse, over-current circuit breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specifications for Drying Ovens |
| Optional Accessories | Programmable temperature controller, RS232/RS485 communication port, chart recorder, additional shelves, observation window, Φ50 cable feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GZX2 |
| Construction | Cold-Rolled Steel Exterior with Epoxy Powder Coating |
| Interior | SUS304 Stainless Steel (BN variant) or High-Temperature Silver-Painted Cold-Rolled Steel (N variant) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Resistance Heater |
| Temperature Controller | Imported Intelligent PID Controller with Auto-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | LED Digital Display for Both Setpoint and Actual Temperature |
| Temperature Range | R.T.+10°C to 300°C / R.T.+20°C to 450°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (R.T.+10°C → 300°C) |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Air Exchange Rate | 5–200 times/hour |
| Timer Range | 0–999 minutes |
| Power Supply | AC 220 V ±10%, 50 Hz ±0.5 Hz |
| Power Rating | 3.0 kW / 4.0 kW / 6.0 kW |
| Internal Dimensions (W×D×H, cm) | 50×60×75 |
| External Dimensions (W×D×H, cm) | 67×106×96 |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Off, Over-Current Circuit Breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Communication Port, Chart Recorder, Additional Shelving, Observation Window, Φ50 Cable Entry Port |
| Brand | LabCompanion |
|---|---|
| Model | HD/HH Series |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C |
| Interior Dimensions (W×H×D) | 450×400×400 mm |
| Exterior Dimensions | 610×905×575 mm |
| Interior Material | Mirror-Finish Stainless Steel |
| Exterior Material | Powder-Coated Steel |
| Insulation | High-Density Compressed Glass Wool |
| Heating System | Finned-Tube Electric Heaters |
| Air Circulation | Forced-Air Convection with Optimized Outlet Design |
| Power Supply | 3-Phase 380 VAC ±10% or Single-Phase 220 VAC ±10% |
| Safety Protections | Bimetallic Over-Temperature Cut-Off, MCCB Overload Protection, Dual-Stage Thermal Alarm (Alarm → Cut-off), Fuse-Protected Circuit |
| Controller | Microprocessor-Based PID Temperature Controller with Setpoint & Real-Time Display |
| Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Optional | Time-Based Auto-Shutdown, Programmable Ramp-Soak Profiles |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-1000 |
| Power Supply | 380 V, 50–60 Hz, 4 kW, 9.2 A |
| Heating Power | 380 V, 3.8 kW, 4.56 A |
| Internal Dimensions (W×D×H) | 900 × 500 × 600 mm |
| External Dimensions (W×D×H) | 1120 × 660 × 1300 mm (including casters and motor) |
| Operating Temperature Range | Ambient +10°C to 180°C (continuous), up to 260°C (intermittent) |
| Temperature Controller | RKC REX-C100 digital PID+R controller with independent over-temperature safety cutoff |
| Safety Features | Dual-stage thermal protection (ALM1 alarm lamp + audible buzzer), phase-loss & phase-sequence protection for motor drive |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-14 |
| Voltage | 3-phase 380 VAC ±10% or single-phase 220 VAC ±10% |
| Interior Dimensions (W×H×D) | 450×400×400 mm / 550×500×500 mm / 650×600×600 mm |
| Exterior Dimensions | 610×905×575 mm / 710×1025×675 mm / 810×1175×775 mm |
| Chamber Material | Mirror-finish stainless steel (SUS304) |
| Exterior Material | Powder-coated cold-rolled steel |
| Insulation | High-efficiency compressed glass wool |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Stability | ±1°C |
| Heating System | Finned tubular electric heaters |
| Air Circulation | Forced convection with adjustable multi-directional air outlets |
| Safety Protections | Dual-stage overtemperature cutoff (ALM1 alarm + ALM2 power cut), thermal fuse, MCCB overload protection, auto-tuning PID controller, post-heating fan delay shutdown |
| Accessories | 2–6 adjustable stainless steel shelves |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Air Constant-Temperature Drying Oven |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C (at 100°C, steady state) |
| Internal Chamber Dimensions (W×H×D) | 450 × 400 × 400 mm |
| External Dimensions (W×H×D) | 610 × 905 × 575 mm |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Exterior Material | Powder-Coated Cold-Rolled Steel |
| Insulation | High-Density Compressed Glass Wool (≥80 mm thickness) |
| Heating System | Finned Tubular Heaters with Aluminum Heat Sinks |
| Air Circulation | Adjustable-Speed Centrifugal Blower + Optimized Baffle-Style Airflow Ducts |
| Control System | Microprocessor-Based PID Temperature Controller with Dual-Line LED Display (Setpoint & Actual Temp), Auto-Tuning Function, Timer with Audible Alarm |
| Safety Protections | Bimetallic Liquid-Expansion Over-Temperature Cut-Off, Dual-Stage Over-Temp Protection (Alarm + Power Cut-off), MCCB Circuit Breaker, Ceramic Fuse, Non-Fuse Switch |
| Power Supply | 3-phase 380 VAC ±10% / 50 Hz or Single-Phase 220 VAC ±10% / 50 Hz |
| Standard Accessories | 2–6 Adjustable Stainless Steel Shelves |
| Optional | Programmable Controller (RS485 Modbus RTU), Data Logging Module, Ethernet Interface, GLP/GMP Audit Trail Firmware |
| Brand | LabCompanion |
|---|---|
| Model | HH15-72 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Temperature Range | RT+10°C to 250°C |
| Temperature Resolution | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Timer Range | 1–9999 min |
| Interior Dimensions (W×D×H) | 450 × 550 × 550 mm |
| Exterior Dimensions (W×D×H) | 600 × 710 × 845 mm |
| Shelving | 2 adjustable stainless steel trays |
| Power Supply | 220 V, 50 Hz, 1500 W |
| Construction | Interior – SUS430 stainless steel (≥1.2 mm) |
| Heating System | Forced-air convection with low-noise high-temp axial fan |
| Control System | Microprocessor-based digital temperature controller with timer and RS485 interface |
| Compliance | Designed per IPC-TM-650 test standards |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH15-72 |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time (Ambient to 100 °C) | Approx. 15 min |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm) |
| Insulation | Imported Rock Wool |
| Heating System | Honeycomb-Type Heaters |
| Controller | PID Microprocessor-Based with Dual PV/SV Digital Display |
| Input Sensor | K-Type Thermocouple (CA) |
| Output Driver | SSR Solid-State Relay (12 V DC) |
| Safety Features | Independent Over-Temperature Protection |
| Timer Function | 0.1 s–999 h with Auto-Cut-Off on Completion |
| Viewing Window | Double-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow |
| Circulation Motor | High-Temperature Resistant Long-Shaft Motor (1 HP) |
| Fan Type | Multi-Blade Turbine Fan |
| Adjustable Baffle System | Internal Airflow Guidance |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HH6 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 200°C / RT+10°C to 300°C (selectable) |
| Control Accuracy | ±1% of full scale |
| Temperature Uniformity | ±1°C (at setpoint, empty chamber, 25°C ambient) |
| Temperature Resolution | 0.1°C |
| Timer Range | 1–9999 minutes |
| Heating System | Independent Ni-Cr alloy sheathed heaters |
| Air Circulation | Vertical forced convection via high-temp low-noise motor + multi-blade centrifugal impeller |
| Safety Protections | Over-temperature cut-off, leakage current protection, short-circuit protection, motor overheat protection, over-current protection |
| Power Supply | AC 220V 50Hz or AC 380V 50Hz |
| Standard Shelving | 2 stainless steel shelves |
| Chamber Liner | Mirror-finish or brushed stainless steel (argon arc welded) |
| Exterior Finish | Powder-coated steel |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LabCompanion Custom Series |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model Designation | Custom-Engineered (e.g., LCO-XX Series) |
| Pricing | Available Upon Technical Specification Review |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN |
| Instrument Type | Vacuum Drying Oven |
| Temperature Range | R.T. to +300 °C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5 °C |
| External Dimensions | 620 × 530 × 490 mm |
| Internal Chamber Dimensions | 340 × 320 × 320 mm |
| Chamber Material | SUS304 Stainless Steel (≤300 °C) or Pre-galvanized Steel |
| Heating Method | Forced-air Convection & Thermal Oil Heating |
| Control System | Microprocessor-based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Safety Features | Independent Over-Temperature Protection Circuit, Silicone Door Seal, Mineral Wool Insulation |
| Compliance | JB/T 5520–1991 (Technical Specification for Drying Ovens) |
| Optional Accessories | Programmable Temperature Controller, RS232/RS485 Interface, Chart Recorder, Observation Window, Cable Port (Φ50 mm), Additional Shelving |
| Brand | LabCompanion |
|---|---|
| Model | PH |
| Type | Precision Forced-Convection Drying Oven |
| Temperature Range | Ambient +10°C to 300°C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Internal Dimensions (W×D×H) | 340 × 320 × 320 mm |
| External Dimensions (W×D×H) | 530 × 620 × 490 mm |
| Chamber Material | SUS304 Stainless Steel (≤300°C) or Galvanized Steel |
| Heating Method | Forced-Air Circulation with Nichrome Wire Heaters |
| Control System | Microprocessor-Based PID Controller with PT100 Sensor |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Compliance | JB/T 5520–1991 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TS Series |
| Pricing | Upon Request |
| Temperature Range (Test Chamber) | −55 °C to +150 °C |
| Temperature Deviation | ±2 °C |
| Temperature Recovery Time | ≤5 min |
| Test Method | Pneumatic Air Damper Switching (2-Zone or 3-Zone Operation) |
| High-Temp Zone Range | +60 °C to +200 °C |
| Low-Temp Zone Range | −55 °C to −10 °C (TS40/TS55-05/08) or −65 °C to −10 °C (TS55-15/25) |
| Heating Rate (RT → +200 °C) | ~35 min |
| Cooling Rate (+20 °C → −55 °C) | ~60 min |
| (+20 °C → −65 °C) | ~70 min |
| Control Interface | 7.5″ TFT Color Touchscreen (Chinese UI) |
| Data Logging | 96 Programmable Test Profiles |
| Communication | RS-232 / RS-485 |
| Refrigeration System | Dual-Stage Mechanical Compression with R-507 / R-23 Eco-Friendly Refrigerants |
| Construction | SUS304 Stainless Steel Interior, Polyurethane + Glass Wool Insulation |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-Phase 4-Wire + PE |
| Safety Protections | Over-Temp, Over-Pressure, Phase Failure, Compressor Thermal & Pressure Monitoring, Air Pressure Interlock, Leakage Circuit Breaker, Exhaust Valve, Motor Reverse Prevention Relay |
| Brand | Labonce |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Labonce-6210VC |
| Temperature Range | RT+20 °C to 200 °C |
| Chamber Volume | 210 L |
| Internal Dimensions (W×D×H) | 560 mm × 600 mm × 640 mm |
| External Dimensions (W×D×H) | 720 mm × 820 mm × 1750 mm |
| Power Rating | 2.0 kW |
| Standard Shelving | 3 independent temperature-controlled shelves |
| Temperature Uniformity | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Measurement | Silicon Piezoresistive Pressure Sensor |
| Vacuum Display Accuracy | ±1% of full scale |
| Vacuum Control Mode | Programmable upper/lower limit + cycle count for automated vacuum cycling |
| Standard Equipment | Integrated Vacuum Pump |
| Brand | Labonce |
|---|---|
| Model | Labonce-140JM |
| Temperature Range | RT+20 °C to 200 °C |
| Chamber Volume | 140 L |
| Internal Dimensions (W×D×H) | 450×550×550 mm |
| External Dimensions (W×D×H) | 600×720×900 mm |
| Power Supply | AC 220 V ±10%, 50 Hz (or AC 380 V ±10%, 50 Hz) |
| Rated Power | 1.5 kW |
| Temperature Uniformity | ±3.0 °C (at ≤200 °C) |
| Temperature Fluctuation | ±1.0 °C |
| Standard Shelves | 2 (max. 8 configurable) |
| Construction | Exterior — powder-coated steel |
| Control System | Digital PID temperature controller |
| Safety | Independent over-temperature protection circuit |