Food Specialized Instruments
Filter
Showing 211–240 of 796 results
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | DairyScan |
| Automation | Fully Automatic |
| Analysis Time | 45 seconds per sample (15 sub-samples per run) |
| Measurement Range | Fat 0–36% w/w |
| Repeatability | ≤0.25% CV |
| Accuracy | ≤1.0% CV |
| Detection Principle | Near-Infrared (NIR) Transmission Spectroscopy |
| Sample Throughput | Up to 80 samples/hour (typical operational rate) |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | Fibertec 8000 |
| Principle | Gravimetric Crude Fiber and Detergent Fiber Analysis (Weende & van Soest Methods) |
| Sample Throughput | Up to 6 samples per run |
| Digestion Vessels | Ceramic crucibles (standardized, pre-weighed) |
| Reagent Handling | Fully automated acid/alkali/enzyme dosing and temperature-controlled digestion |
| Compliance | AOAC 978.10, AOAC 985.29, AACC 32-05, ISO 6865, EN ISO 13906 |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | Fibertec™ 1023 |
| Application Principle | Enzymatic-gravimetric method per AOAC 991.43, AOAC 2009.01, AACC 32–07, NMKL 158, and ASP methods |
| Sample Capacity | 12 samples per digestion batch, 6 samples per filtration batch |
| Digestion Vessel Volume | 600 mL |
| Water Bath Temperature Range | Ambient to 80 °C |
| Temperature Accuracy | ±0.1 °C |
| Oscillation Speed | 0–150 cycles/min |
| Oscillation Amplitude | 0–50 mm |
| Filtration Throughput | 2–4 min per 100 mL digested slurry |
| Reproducibility | RSD < 0.5% for total dietary fiber (TDF) across replicate analyses |
| Compliance | Fully aligned with AOAC Official Methods of Analysis®, ISO 13905:2014, and USP <2040> for dietary fiber quantification |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | Fossomatic 7 |
| Automation Level | Fully Automatic |
| Analysis Speed | Up to 600 samples/hour |
| Detection Range | 0–10 × 10⁶ cells/mL |
| Repeatability | CV < 4% at 500,000 cells/mL |
| Accuracy | < 10% deviation vs. direct microscopic count |
| Technology | Flow Cytometry |
| Compliance | ISO 13366-1, IDF 148, FDA/NCIMS Grade A Standards |
| Software Platform | Foss Integrator NOVA |
| Sample Types | Bovine, ovine, caprine, and buffalo milk |
| Configuration Options | Fossomatic 7 (total SCC) and Fossomatic 7 DC (somatic cell differential counting) |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | MeatMaster II |
| Technology | X-ray Transmission |
| Sample Types | Raw, chilled, or frozen meat (bone-in or boneless |
| Detection Parameters | Fat content, mass, foreign object detection (metal, bone) |
| Compliance | Designed for food processing environments meeting EU Hygiene Regulation (EC) No. 852/2004, HACCP principles, and compatible with GMP/GLP-aligned QA workflows |
| Brand | FOSS |
|---|---|
| Country of Origin | Denmark |
| Model | MilkoScan FT3 |
| Detection Parameters | Fat, Protein, Lactose, Total Solids, Non-Fat Solids, Freezing Point, Titration Acidity, Density, Free Fatty Acids, Citric Acid, Casein, Urea, Sucrose, Glucose, Fructose, Galactose |
| Automation Level | Fully Automatic |
| Analysis Time | 30 seconds per sample |
| Precision (CV) | < 0.25% (Fat, Protein, Lactose), < 0.20% (Total Solids), < 1 m°C (Freezing Point) |
| Sample Volume | < 8.0 mL |
| Flow System | Fully Automated Cleaning & Zeroing with Adaptive Adjustment |
| Connectivity | LIMS, FossManager™ Software |
| Dimensions | 750 × 450 × 408 mm |
| Weight | 43 kg |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | Milkoscan Mars |
| Automation | Fully Automatic |
| Analysis Time | 1 min per sample |
| Measurement Parameters | Fat, Protein, Lactose, Total Solids, Non-Fat Solids |
| Repeatability | ≤0.5% CV (for raw milk major components) |
| Accuracy | ≤1.2% CV (for raw milk major components) |
| Technology | Fourier Transform Infrared (FTIR) Spectroscopy |
| Compliance | Designed for ISO 9001–certified dairy QA/QC environments |
| Screening Capability | Pre-installed ASM (Adulterant Screening Module) models for urea, sucrose, formaldehyde, sodium bicarbonate, potassium nitrate, and other common adulterants |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | MilkoScan™ FT2 |
| Automation | Fully Automatic |
| Analysis Time | 30 s |
| Sample Volume Range | 4–25 mL |
| Repeatability | <0.2% CV (for fat, protein, lactose, total solids, SNF in raw milk) |
| Accuracy | <0.8% CV (for fat, protein, lactose, total solids, SNF in raw milk) |
| Operating Temperature Range | 5–55 °C |
| Carry-over | <1% |
| Optical System | Sealed, temperature-controlled FTIR interferometer |
| Calibration Methods | Intercept/slope adjustment |
| Supported Chemometric Models | PLS, modified PLS, PCA |
| Compliance | CE-marked |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | MycoFoss |
| Detection Principle | Bead-based Flow Cytometric Immunoassay |
| Sample Throughput | Up to 12 samples per run |
| Assay Time | ≤8 minutes per sample |
| Target Analytes | Aflatoxins (AFB1, AFB2, AFG1, AFG2), Deoxynivalenol (DON), Zearalenone (ZEA), Ochratoxin A (OTA), T-2 Toxin, Fumonisins (FB1, FB2, FB3) |
| Sample Types | Ground corn, wheat, and barley |
| Automation Level | Fully automated sample preparation, assay execution, and data reporting |
| Compliance Support | Audit-trail enabled, 21 CFR Part 11–ready software architecture, GLP/GMP-aligned workflow design |
| Data Management | Integrated instrument control, result traceability, PDF report generation, and CSV export |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | OenoFoss 2 |
| Application Modes | Laboratory & At-line |
| Analysis Time | ≤2 min |
| Alcohol Content | 0.5–19 % vol. |
| pH Range | 2.6–4.0 |
| Dimensions (L×W×H) | 189 × 154 × 321 mm |
| Weight | 6.3 kg |
| Sample Volume | 600 µL |
| Operating Temperature | 10–35 °C |
| Detection Principle | Fourier Transform Infrared (FT-IR) Spectroscopy |
| Parameters Measured | Ethanol, Glucose, Fructose, pH, Total Acidity, Volatile Acidity, Malic Acid, Sugar Content (°Brix), Color Intensity |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | ProFoss™ 2 |
| Automation | Fully Automatic |
| Analysis Time | 3–15 seconds per sample |
| Wavelength Range | 850–1050 nm |
| Wavelength Accuracy | < 0.5 nm |
| Wavelength Precision | < 0.02 nm |
| Wavelength Stability | < 0.01 nm/°C |
| Detector | Silicon Diode Array |
| Spectral Resolution | 1.0 nm/pixel |
| Light Source Lifetime | Dual Lamp System = 17,500 h |
| Environmental Rating | IP69K |
| Operating Temperature | –5 to 40 °C |
| Enclosure Material | Stainless Steel EN 1.4301 (SS2333) |
| Dimensions (W × H × D) | 42 × 42 × 13.5 cm |
| Weight | 25 kg |
| Communication Interfaces | Ethernet, OPC UA, 4–20 mA, PROFIBUS, RINA |
| Power Supply | 100–240 VAC, 50–60 Hz, 2.0 A, 150 W |
| Brand | FOSS |
|---|---|
| Origin | Denmark |
| Model | WineScan |
| Application Modes | Laboratory & Online-ready |
| Analysis Time | 30 seconds per sample |
| Alcohol Content Range | 0.01–0.4 % vol |
| pH Range | 2.8–3.9 |
| Dimensions (L × W × H) | 62 × 33 × 59 cm |
| Instrument Weight | 89 kg |
| Measurement Principle | Fourier Transform Infrared (FTIR) Spectroscopy |
| Key Parameters | Density, pH, Total Acidity, Reducing Sugars, Dry Extract, Brix, Ethanol, Volatile Acidity, Malic Acid, Lactic Acid, Tartaric Acid, Free SO₂ (optional), Residual Sugar, Acetic Acid, Glucose, Fructose, Glycerol, Citric Acid, Sorbic Acid, Methanol (method-dependent) |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT102X, FT104X |
| Capacity | 60 L/h (for 2 L bottles) |
| Processing Vessel | 30 L |
| Bottle Volume Range | 0.15–2.0+ L |
| CO₂ Solubility | >10 g/L |
| Operating Temperature | 4–20 °C |
| Filling Modes | Pre-mix and Post-mix |
| Gas Options | CO₂ (primary), N₂ (inert blanketing) |
| Control Interface | Full-color touchscreen with embedded help system |
| Preset Programs | 32 |
| Compliance Support | Designed for GLP-aligned lab-scale process development |
| Cleaning | Enhanced CIP routines for heater and nozzle assemblies |
| Dual-mode operation | Batch and continuous |
| Optional Integration | FT104X capping/filling module |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT2 |
| Type | Benchtop Hammer Mill with Replaceable Perforated Screens |
| Screen Options | 8 interchangeable perforated plates (standard aperture range: 0.5 mm to 6.0 mm) |
| Drive System | Single-phase induction motor with thermal overload protection |
| Safety Compliance | CE-marked, conforms to EN 61000-6-3 (EMC) and EN 61000-6-2 (immunity) |
| Construction | Stainless steel grinding chamber and feed hopper, anodized aluminum housing |
| Cleaning | Tool-free disassembly of rotor assembly, screen retention ring, and hopper for full-access cleaning |
| Power Supply | 230 V AC, 50 Hz, 1.1 kW |
| Brand | Armfield |
|---|---|
| Origin | United Kingdom |
| Model | FT5 |
| Type | Benchtop Ribbon Mixer with Interchangeable Single-Conical Drum Attachment |
| Speed Control | Variable, Continuous Adjustment |
| Construction | 316 Stainless Steel Contact Surfaces |
| Drive System | Precision Geared Motor with Digital Speed Display |
| Compliance | Designed for Food Processing R&D Environments in Accordance with EU Machinery Directive 2006/42/EC and Hygienic Design Principles per EHEDG Doc. Type EL (Equipment Layout) |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | ENS-STouch |
| Type | Motorized Dual-Column Texture Analyzer with Integrated Touchscreen Control |
| Compliance | FDA 21 CFR Part 11 (Audit Trail, Electronic Signatures, Role-Based Access Control) |
| Software | VPro MT v3.2 (Modular, Icon-Based Programming Environment) |
| Force Range | 0.01–500 N (Selectable Load Cells) |
| Displacement Resolution | 0.1 µm |
| Speed Range | 0.01–2000 mm/min |
| Data Acquisition Rate | Up to 2 kHz |
| Sample Platform | Motorized Z-Axis with Auto-Return & Position Memory |
| Interface | 10.1" HD Capacitive Touchscreen + Ethernet/USB-C Connectivity |
| Brand | FTC |
|---|---|
| Model | PILOT |
| Type | Universal Texture Analyzer for Food Applications |
| Force Range | Optimized for Low-to-Medium Load Testing (Typical Range: 0–500 N, Configurable per Sensor Module) |
| Display | Integrated High-Resolution LCD Touchscreen Interface |
| Connectivity | USB & RS-232 |
| Compliance | Designed to Support ASTM F2714, ISO 11357-3, USP <721>, and GLP/GMP Data Integrity Requirements |
| Software | FTC Texture Pro™ v4.x with Audit Trail, User Access Levels, and 21 CFR Part 11–Ready Configuration Options |
| Probe Compatibility | Full Interchangeability with FTC Standard Probe Library (e.g., TA-50, TA-100, TA-200 Series) |
| Data Storage | Unlimited Test Method & Result Archiving on Internal SSD |
| Safety | IP20 Enclosure, Emergency Stop, Motor Overload Protection |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | TMS-BFG |
| Power Source | Manual (hand-cranked) |
| Construction | Full stainless-steel frame with corrosion-resistant and wear-resistant finish |
| Display | Backlit LCD showing real-time force values |
| Force Units | N, lbf, kgf |
| Operating Modes | Compression and Tension |
| Data Interface | RS232 serial port |
| Data Storage | Onboard memory with export capability |
| Software | Included proprietary texture analysis software (Windows-compatible) |
| Overload Protection | Audible and visual alert at ≥110% of full-scale capacity |
| Portability | Integrated carry handle |
| Compliance | Designed to support ASTM F2574 (Standard Test Method for Measuring Tenderness of Peas), ISO 11350 (Food — Determination of textural properties — General principles), and USDA/FSIS meat tenderness validation protocols |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | TMS-PRO |
| Maximum Force Capacity | 2500 N |
| Force Resolution | Adjustable via interchangeable load cells (10, 25, 50, 100, 250, 500, 1000, 2500 N) |
| Force Accuracy | ±0.015% of full scale |
| Travel Distance | 300 mm (extendable per custom configuration) |
| Vertical Positioning Resolution | 2.5 µm over 320 mm stroke |
| Speed Range | 0.1–500 mm/min (adjustable in 0.01 mm/min increments) |
| Speed Accuracy | ±0.1% of set value |
| Data Acquisition Rate | >2000 points/sec |
| Probe Compatibility | ISO/ASTM-compliant standardized probes with NIST-traceable calibration certificates |
| Dimensions (W×D×H) | 290 × 430 × 750 mm |
| Weight | 18.2 kg |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | TMS-PRO |
| Type | Research-Grade Universal Texture Analyzer |
| Compliance | ASTM F3102, ISO 11357-3 (for thermoplastic food analogs), USP <1141> (for mechanical property assessment of semi-solids) |
| Force Range Options | 5 N, 50 N, 500 N, 1 kN (interchangeable load cells) |
| Displacement Resolution | 0.1 µm |
| Data Acquisition Rate | Up to 1,000 Hz |
| Probe Mounting | Standard 1/4"-20 UNC thread interface |
| Software Platform | Texture Pro CT v3.x (FDA 21 CFR Part 11 compliant with audit trail, electronic signatures, and user role management) |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | TMS-SPro |
| Software Platform | VPro MT |
| Compliance | FDA 21 CFR Part 11, GLP/GMP-ready |
| Application Domain | Food, Pharmaceutical, Agricultural, Cosmetic & Material Science Testing |
| Measurement Principle | Controlled-Force Compression/Tension/Penetration with Load Cell-Based Force Transduction and Precision Displacement Sensing |
| Brand | FTC |
|---|---|
| Origin | USA |
| Model | TMS-Touch |
| Type | Motorized Single-Column Texture Analyzer with Integrated Touchscreen Controller |
| Force Range | Up to 1000 N (standard), optional up to 5000 N |
| Speed Range | 0.01–2000 mm/min |
| Displacement Resolution | 0.1 µm |
| Force Resolution | 0.001 N |
| Data Acquisition Rate | Up to 1000 Hz |
| Compliance | ASTM F307, ISO 11357-4, USP <721>, AACC 74-09, TA-16 |
| Brand | Funke |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FermentoStar |
| Price | Upon Request |
| Alcohol Content Range | 0–15% (v/v) |
| Real Extract Range | 0–10% (w/w) |
| Original Wort Extract Range | 0–20% (w/w) |
| Apparent Extract Range | 0–10% (w/w) |
| Repeatability | ±0.01% for all extract and alcohol parameters |
| Sample Volume | 18 mL |
| Analysis Time | ≤120 s per sample |
| Throughput | Up to 30 samples/hour |
| Power Supply | 220 V / 50 Hz, 180 W |
| Dimensions | 25 × 19 × 35 cm |
| Weight | 8.5 kg |
| Interfaces | RS-232, USB, Parallel Printer Port |
| Calibration | Internal database of 20 preloaded beer types (e.g., Pilsner, Malt Beer, Strong Ale) |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | CRYOSTAR I |
| Measurement Range | 0.000 °C to –1.500 °C |
| Sample Volume | 2.2 mL |
| Temperature Resolution | 0.0001 °C |
| Repeatability | ±0.002 °C (typical operational precision ±0.0002 °C) |
| Throughput | 40 samples/hour |
| Dimensions (W×H×D) | 290 × 190 × 380 mm |
| Weight | 12 kg |
| Power Supply | 230/115 V AC, 50–60 Hz, 180 W |
| Interfaces | RS-232 port (1), 6 V printer port |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | CryoStar |
| Automation | Fully Automatic |
| Analysis Speed | Up to 40 samples/h (typical 30 samples/h) |
| Measurement Range | 0.0000 °C to −1.5000 °C |
| Repeatability | ±0.0020 °C |
| Accuracy | 0.0001 °C |
| Sample Volume | 2.2 mL (recommended) |
| Power Supply | 230 V / 115 V AC, 50–60 Hz, 180 VA |
| Cooling Time | ~15 min |
| Display | 7″ color touchscreen |
| Interfaces | 2× RS-232, 2× USB, Ethernet |
| Dimensions (CryoStar 1) | 290 × 380 × 190 mm (W×D×H), 12.0 kg |
| Dimensions (CryoStar Automatic) | 440 × 440 × 200 mm (W×D×H), 14.6 kg |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | FermentoFlash |
| Instrument Type | Dedicated Beer Analyzer |
| Application | Laboratory Use |
| Measurement Time | 1 min |
| Alcohol Content Range | 0.00–15.00 % v/v |
| pH Range | 0–14 |
| Dimensions (L × W × H) | 300 × 240 × 330 mm |
| Weight | 5 kg |
| Density Range | 0.95–1.05 g/cm³ |
| Extract Range | 0.00–10.00 % m/m |
| Apparent Extract Range | 0.00–10.00 % m/m |
| Original Wort Gravity Range | 0.00–20.00 °P |
| Density Repeatability | ±0.0002 g/cm³ |
| Alcohol Repeatability | ±0.02 % v/v |
| Extract & Apparent Extract Repeatability | ±0.04 % m/m |
| Original Wort Gravity Repeatability | ±0.02 °P |
| Calibration Memory | 18 profiles |
| Interface | USB/RS-232 for PC connectivity |
| Included Accessories | Integrated thermal printer, 100 mL conical sample vial, 5 L zero-point calibration buffer, 500 mL cleaning solution |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | LactoFlash |
| Automation | Fully Automatic |
| Analysis Speed | Up to 120 samples/h |
| Measurement Range | Fat 0.00–30.00%, Non-Fat Solids (NFS) 0.00–15.00% |
| Repeatability | ±0.02% (Fat, 0–5%), ±0.04% (NFS) |
| Accuracy | ±0.01% (Fat & NFS) |
| Sample Volume | 12–20 mL |
| Interface | 1× Parallel Port, 1× RS232, 1× USB, 1× 6 V DC output |
| Power Supply | 230 V / 115 V AC, 50–60 Hz, 180 W |
| Dimensions (W×H×D) | 30 × 24 × 33 cm |
| Weight | 5 kg |
| Display | Integrated LCD interface |
| Calibration | Two-point calibration with on-screen prompts |
| Data Storage | Internal memory for sample results and calibration logs |
| Language Options | English and German |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | LactoStar |
| Automation | Fully Automatic |
| Analysis Speed | Up to 90 samples/h |
| Measurement Range | 0.00–40.00% (fat), 0.00–10.00% (protein, lactose, non-fat solids), 0.00–5.00% (minerals) |
| Repeatability | ±0.01% (fat @ 0–8%), ±0.02% (fat @ 8–40%), ±0.03% (protein/lactose), ±0.04% (non-fat solids), ±0.02% (minerals) |
| Accuracy | ±0.01% (all parameters) |
| Sample Volume | 12–20 mL |
| Display | LCD interface |
| Dimensions | 43 × 20 × 43 cm (W × H × D) |
| Weight | 15.7 kg |
| Power Supply | 230 V / 115 V AC, 50–60 Hz, 180 W |
| Interfaces | 1× Parallel port, 1× RS232, 1× USB, 1× 6 V DC output |
| Brand | Funke Gerber |
|---|---|
| Origin | Germany |
| Model | SuperVario-N |
| Max Speed | 1130 rpm |
| Max RCF | 372 × g |
| Speed Range | 600–1130 rpm (adjustable in 10 rpm increments) |
| Temperature Range | Ambient to 68 °C (adjustable in 1 °C increments) |
| Time Setting | 1–99 min |
| Heating Function | Yes (maintains sample tube temperature ≥50 °C during operation) |
| Pre-programmed Methods | Gerber, Babcock, Rose-Gottlieb, Solubility Method |
| Safety Features | Automatic lid lock, imbalance detection, electronic braking |
| Power Supply | 230 V / 50 Hz |
| Net Weight | 26 kg |
| Rotor Options | Rotor A (Gerber, 36×31 mm tubes), Rotor B (Babcock, 36×32 mm tubes), Rotor C (Rose-Gottlieb, custom adapter), Rotor D (Solubility/ADMI, 36×33 mm tubes) |
| Compliance | CE-marked, designed per IEC 61010-1 for laboratory equipment safety |
| Brand | G-WON |
|---|---|
| Origin | South Korea |
| Model | GMK-835F |
| Measurement Principle | Conductometric (Platinum-Coated Electrode) |
| Temperature Compensation | Automatic (ATC) |
| Data Averaging | Multi-measurement statistical averaging |
| Calibration | Fully automated internal calibration routine |
| Fruit Mode Selection | Single pre-programmed fruit category (Citrus, Orange, Pineapple, Kiwi, Apple, Grape, Pear, Strawberry, Peach, Plum, Melon) |
| Power Indicator | Low-battery warning |