Incubator Equipment
Filter
Showing 751–780 of 1406 results
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPX-150 |
| Capacity | 150 L |
| Temperature Range | 5–50 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±0.5 °C |
| Power Supply | AC 220 V ±10%, 50 Hz ±2% |
| Rated Power | ≤500 W |
| Operating Ambient Temperature | 0–40 °C |
| Max. Relative Humidity | <85% RH |
| Construction | Cold-rolled steel exterior with powder coating, stainless steel interior chamber |
| Insulation | Polyurethane foam |
| Display | LED digital display (optional LCD upgrade available) |
| Air Circulation | Optimized forced-air convection system |
| Safety Features | Compressor delay start, power interruption protection |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | DHP-270 |
| Price | USD 1,200 (FOB) |
| Temperature Range (with Humidification) | Not Specified |
| Temperature Uniformity | Not Specified |
| Humidity Range | Not Specified |
| Chamber Capacity | Not Specified |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | DHP-80 |
| Price | USD 680 (FOB) |
| Temperature Range (with Humidification) | Not Specified |
| Temperature Uniformity | Not Specified |
| Humidity Range | Not Specified |
| Chamber Capacity | Not Specified |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | BIO-FITOCLIMA 5000PH |
| Temperature Range | +5°C to +45°C (light ON), 0°C to +45°C (light OFF) |
| Humidity Range | 40–80% RH (light ON), 40–90% RH (light OFF) |
| Illumination Intensity | Configurable per light module type (e.g., white LED, red/blue spectrum) |
| Internal Dimensions (W×D×H) | 2160 × 2225 × 2610 mm |
| Nominal Volume | ~5,000 L (customizable up to 25,000 L) |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Model | CO2 Incubator |
| Temperature Control Range & Accuracy | Ambient +8°C to +50°C (typical operating range: 37°C ±0.1°C) |
| Temperature Uniformity | ±0.2°C at 37°C (per DIN 12880) |
| Humidity Control Range & Accuracy | 40–97% RH (dynamic system) or 88–97% RH (water pan only) |
| Chamber Capacity | 108 L / 153 L / 246 L |
| Sterilization | Full-chamber dry-heat sterilization at +160°C for 4 h |
| CO₂ Control Range | 0–20% (±0.1% accuracy) |
| O₂ Control Range (with optional O₂ module) | 1–20% (via N₂ injection) |
| Compliance | CE-marked, compliant with EU Medical Device Directive 93/42/EEC (Class IIa), ISO 13485 certified manufacturing environment |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Model Range | IN30–IN750 / INplus30–INplus750 / IF30–IF750 / IFplus30–IFplus750 |
| Temperature Range (with optional humidification) | +20 °C to +80 °C |
| Temperature Uniformity | ±0.1 °C |
| Chamber Volume | 32 L to 750 L |
| Air Circulation | Natural Convection (IN series) or Adjustable Forced Convection (IF series, fan speed adjustable in 10% increments) |
| Sterilization Capability | +160 °C for 4 h (INplus/IFplus models) |
| Fresh Air Preheating | Integrated preheating chamber for incoming ambient air |
| Power Supply | 230 V, 50/60 Hz |
| Electrical Load | 800 W to 2000 W (model-dependent) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Imported |
| Model Variants | ICO50 / ICO105 / ICO150 / ICO240 |
| Instrument Type | Air-Jacketed CO₂ Incubator |
| CO₂ Detection | Infrared (IR) Sensor |
| Temperature Control Range & Accuracy | 18–50 °C (±0.1 °C typical at 37 °C) |
| Temperature Uniformity | ±0.2–0.3 °C (at 37 °C, measured per DIN 12880) |
| CO₂ Concentration Control Range & Accuracy | 0–20% (±0.1% at 5% CO₂) |
| Humidity Control Range & Accuracy | 40–97% RH (±1.5% RH, non-condensing) |
| Chamber Volume | 56 L (ICO50 variant) |
| Dimensions (W×D×H) | 600 × 620 × 840 mm |
| Standard Configuration | Multi-point calibration support, Six-sided heating, IR CO₂ sensor, 180 °C dry-heat sterilization cycle (60 min), Dual Pt100 temperature sensors, Heated glass door, AtmoCONTROL software integration, USB + Ethernet connectivity, Internal SD card (10-year data logging capacity) |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Model | ICP Series (55–750 L) |
| Temperature Range | –12 °C to +60 °C |
| Construction | Forced-Air Jacketed Chamber with Dual-Display Touchscreen Control |
| Interior Material | AISI 304 Stainless Steel (EN 1.4301) |
| Air Circulation | Electronically Adjustable (10% increments) |
| Cooling System | High-Efficiency Hermetic Compressor |
| Compliance | CE, ISO 13485 (Design & Manufacturing), GLP/GMP-Ready Architecture |
| Connectivity | Ethernet & USB Interfaces |
| Optional Features | Programmable Day/Night Light Simulation, Preheated Fresh Air Inlet with Motorized Dampers, Lockable Castors (Models ≥450 L) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model Series | ICP / IPP |
| Temperature Range (ICP) | 0 °C to 60 °C |
| Temperature Range (IPP) | +5 °C to +60 °C |
| Temperature Uniformity (ICP) | ±0.3 °C at 10 °C, ±0.2 °C at 37 °C |
| Temperature Uniformity (IPP) | < ±0.3 °C from 10 °C to 37 °C |
| Temperature Stability (IPP) | ±0.05 °C |
| Control Precision | ±0.1 °C |
| Sensor Type | Dual 4-wire PT100 |
| Heating System | Enclosed hot-air jacket (ICP) |
| Refrigerant (ICP) | R134a (CFC-free) |
| Chamber Material | Stainless steel (AISI 304) |
| Door Construction | Double-door — inner tempered glass, outer stainless steel |
| Air Exchange | Adjustable in 10% increments |
| Controller | Fuzzy logic PID with programmable ramp profiles (up to 40 segments, 1 min–999 h) |
| Memory | 1024 kB cyclic data logging |
| Interface | RS232 / RS485 (Celsius 2005 compatible), parallel printer port |
| Optional Storage | 32 kB Memory Card |
| Certification | IQ/OQ documentation available |
| Software Compliance | Celsius 2005 FDA Edition supports 21 CFR Part 11 audit trail, electronic signatures, and user access control (User-ID Card required) |
| Key | Origin: Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | YIQI030 |
| Price | Upon Request |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP400 |
| Temperature Range | 0–60 °C |
| Chamber Volume | 53 L |
| Interior Dimensions (W×H×D) | 400×400×330 mm |
| Exterior Dimensions (W×H×D) | 558×967×486 mm |
| Heating/Cooling System | Fully Enclosed Air-Jacket |
| Refrigerant | R134a (CFC-free) |
| Control | Microprocessor-based Fuzzy Logic Controller with 9-Stage Programmable Ramp/Soak Profiles |
| Interface | RS232 (upgradeable to RS485) |
| Memory Card Support | MEMoryCardXL |
| Safety | Dual Independent Overtemperature Protection (TWW Class 3.1 + TB Class 1) |
| Compliance | Designed for GLP/GMP environments |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP400 |
| Temperature Range | 0–60 °C |
| Interior Volume | 53 L |
| Temperature Uniformity | ±0.3 °C (at 10–37 °C) |
| Temperature Stability | ±0.1 °C (over time) |
| Control Resolution | 0.1 °C |
| Construction | Stainless Steel (Interior & Exterior) |
| Door | Double-layer (Tempered Glass Inner + Stainless Steel Outer) |
| Air Circulation | Adjustable Forced Convection (10% increments) |
| Heating/Cooling System | Compressor-based Gas-jacketed Thermal Regulation |
| Controller | P-type Digital PID with Programmable Ramp/Soak Profiles |
| Compliance | CE Marked, GLP-Ready, ISO 13485-aligned Design |
| Interfaces | RS232, Parallel Printer Port |
| Software | Celsius® PC Control & Data Logging Suite |
| Calibration | Supplied with 10 °C and 37 °C Certificate of Calibration |
| Safety | Overtemperature & Overcooling Protection, Door Open Alarm, Self-diagnostic System |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP500 |
| Capacity | 108 L |
| Temperature Range | 0–60 °C |
| Heating/Cooling System | Fully Enclosed Air-Jacket (Heating Top / Cooling Bottom) |
| Refrigerant | R134a (CFC-free) |
| Control | Microprocessor-Based Fuzzy Logic Controller |
| Programmability | Up to 9-Stage Temperature & Fan Profiles |
| Interface | RS232 (standard), optional RS485 |
| Data Storage | MEMoryCardXL removable memory card |
| Safety | Dual Independent Overtemperature Protection (TWW Class 3.1 + TB Class 1) |
| Construction | Interior & Exterior Stainless Steel (AISI 304) |
| Automatic Defrost | Full-cycle, non-interruptive |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP600 |
| Temperature Range | 0–60 °C |
| Chamber Volume | 256 L |
| Inner Dimensions (W×H×D) | 800 × 640 × 500 mm |
| Outer Dimensions (W×H×D) | 958 × 1335 × 656 mm |
| Heating/Cooling System | Fully Enclosed Air-Jacket |
| Refrigerant | R134a (CFC-free) |
| Control | Microprocessor-based Fuzzy Logic Controller with 9-Stage Programmable Ramp/Soak Profiles |
| Interface | RS232 (standard), optional RS485 |
| Data Storage | MemoryCardXL support |
| Safety | Dual Independent Overtemperature Protection (TWW Class 3.1 + TB Class 1) |
| Compliance | Designed for GLP/GMP environments |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP700 |
| Temperature Range | 0–60 °C |
| Internal Volume | 416 L |
| Chamber Dimensions (W×H×D) | 1040 × 800 × 500 mm |
| External Dimensions (W×H×D) | 1198 × 1495 × 656 mm |
| Cooling Agent | R134a (CFC-/HCFC-free) |
| Control System | Microprocessor-based Fuzzy Logic Controller |
| Programmability | Up to 9-segment temperature/time profiles |
| Interface | RS232 (standard), optional RS485 |
| Software Support | Celsius 2000 (free) |
| Memory Card | MEMoryCard XL compatible |
| Safety | Dual independent overtemperature protection (TWW Class 3.1 + TB Class 1) |
| Heating/Cooling Architecture | Separated top-mounted heating unit and bottom-mounted refrigeration unit |
| Humidity Preservation | Fully enclosed air-jacket heating system |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP700 |
| Temperature Range | 0–60 °C |
| Internal Volume | 416 L |
| Chamber Dimensions (W×H×D) | 1040 × 800 × 500 mm |
| External Dimensions (W×H×D) | 1198 × 1495 × 656 mm |
| Heating/Cooling System | Fully Enclosed Air-Jacket |
| Refrigerant | R134a (CFC-free) |
| Control | Microprocessor-based Fuzzy Logic Controller with 9-Stage Programmable Ramp/Soak Profiles |
| Interface | RS232 (standard), optionally RS485 |
| Data Storage | MEMoryCardXL removable program card |
| Safety | Dual Independent Overtemperature Protection (TWW Class 3.1 + TB Class 1) |
| Compliance | Designed for GLP/GMP environments |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP800 |
| Capacity | 749 L |
| Temperature Range | 0–60 °C |
| Control Stages | Up to 9-Stage Programmable Ramp/Soak Profiles |
| Cooling Medium | R134a (CFC-free) |
| Heating System | Fully Enclosed Air-Jacket |
| Defrost | Fully Automatic, Continuous Operation Compatible |
| Interface | RS232 (standard), optional RS485 |
| Compliance | Designed for GLP/GMP-aligned laboratory environments |
| Internal Construction | Electropolished Stainless Steel (AISI 304) |
| External Construction | Powder-Coated Steel with Stainless Steel Front Panel |
| Fan Control | Adjustable Speed & Scheduling |
| Optional | Internal Fluorescent Lighting for Photoperiod Simulation |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Manufacturer | Memmert GmbH & Co. KG |
| Type | Forced-air (convection) incubator |
| Models | IF30 / IF55 / IF75 / IF110 / IF160 / IF260 / IF450 / IF750 |
| Temperature Range | 20–80 °C |
| Chamber Capacities | 30 / 55 / 75 / 110 / 160 / 260 / 450 / 750 L |
| Airflow Control | 10-step adjustable fan speed (0–100%) |
| Fresh Air Preheating | Integrated preheating chamber for incoming air |
| Compliance | Designed and manufactured in accordance with ISO 13485, IEC 61010-1, and EN 60335-1 |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Manufacturer | MEMMERT GmbH & Co. KG |
| Type | Forced-Air Incubator with Dual LCD Display |
| Models | IF30plus, IF55plus, IF75plus, IF110plus, IF160plus, IF260plus, IF450plus, IF750plus |
| Temperature Range | 20–80 °C |
| Chamber Capacities | 30 / 55 / 75 / 110 / 160 / 260 / 450 / 750 L |
| Sterilization Capability | 160 °C for 4 h |
| Fresh Air Preheating System | Integrated preheating chamber |
| Airflow Control | Fan speed adjustable in 10% increments |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Models | IN 30 / IN 55 / IN 75 / IN 110 / IN 160 / IN 260 / IN 450 / IN 750 |
| Temperature Range | 20–80 °C |
| Chamber Volume | 30 / 55 / 75 / 110 / 160 / 260 / 450 / 750 L |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | INC108 / INC153 / INC246 |
| Temperature Range | +20 °C to +50 °C (min. +8 K above ambient) |
| Humidity Range (standard) | 88–97 % RH |
| Humidity Range (with optional Dynamic Humidity Module) | 40–97 % RH |
| CO₂ Range (standard) | 0–10 % vol. |
| CO₂ Range (with CO₂ Module) | 0–20 % vol. |
| O₂ Range (with O₂ Module) | 1–20 % vol. |
| Sterilization | Dry-heat at +160 °C for 4 h (full chamber, including CO₂ sensor) |
| Temperature Uniformity (DIN 12880 | 2007-05, 37 °C): ≤ ±0.3 °C |
| Temperature Stability (DIN 12880 | 2007-05): ≤ ±0.13 °C |
| Sensor Type | 4-wire Pt100 (redundant), NDIR CO₂ sensor with auto-zero calibration every 24 h |
| Compliance | Certified as Class IIa medical device per MDR (EU 2017/745), GLP/GMP-ready architecture |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INC108 |
| Pricing | Upon Request |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | INC108 |
| Chamber Volume | 108 L |
| Temperature Range | 20–45 °C (min. 8 °C above ambient) |
| Temp. Set/Display Resolution | 0.1 °C |
| Temp. Uniformity | ±0.3 °C @ 37 °C |
| CO₂ Range | 0–10% (0.1% steps), optional 0–20% |
| CO₂ Set/Display Resolution | 0.1% |
| CO₂ Stability | ±0.1% over time |
| CO₂ Uniformity | ±0.3% across chamber |
| Humidity Range (standard water pan) | 88–97% RH (1% steps) |
| Humidity Range (optional dynamic steam generator) | 40–97% RH |
| Humidity Stability | ±1% RH over time |
| Humidity Control | PID-controlled water pan or steam-based active regulation |
| Heating | 6-sided uniform heating with aluminum thermal mass layer |
| Airflow | Turbulence-free, laminar convection system |
| Door | Double-wall — inner tempered glass + outer stainless steel |
| Sterilization | In-situ dry-heat sterilization at 160 °C for 4 h (chamber, sensors, ducts, water pan) |
| Safety | Audible alarms for over/under temperature, CO₂ deviation, door open, empty gas cylinder |
| Certification | CE-marked |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INC153 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INC246 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INE200 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INE400 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INE500 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INE600 |
| Pricing | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | INE800 |
| Pricing | Upon Request |