Muffle Furnace
Filter
Showing 301–330 of 923 results
| Origin | UK |
|---|---|
| Type | Box-type Muffle Furnace |
| Max Temperature | 1100 °C |
| Operating Temperature Range | Ambient to 1050 °C (continuous) |
| Temperature Uniformity | ±5 °C at 1050 °C |
| Control Accuracy | ±2 °C |
| Internal Dimensions (W×D×H) | 178 × 305 × 125 mm |
| Chamber Volume | 7 L |
| Max Power | 2 kW |
| Heating Rate to 1100 °C | ≤50 min |
| Heating Element | Kanthal A1 resistance wire embedded in ceramic fiber grooves, dual-sided configuration |
| Insulation | Low-mass ceramic fiber board (density ~128 kg/m³) |
| External Casing | Galvanized steel with polyester powder coating |
| Door Safety | Spring-assisted upward-opening insulated door with automatic power cut-off upon opening |
| Exhaust | Integrated top-mounted flue port |
| Thermocouple | Type N (Nickel-Nickel Molybdenum), calibrated per IEC 60584-2 |
| Electrical Supply | 240 V AC, single-phase, 50/60 Hz |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TSH Series |
| Pricing | Available Upon Request |
| Origin | United Kingdom |
|---|---|
| Type | Box-type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Operating Temperature Range | Ambient to 1250 °C (continuous) |
| Internal Dimensions | 150 × 150 × 150 mm (BCF13/5 model) |
| Effective Volume | 5 L |
| Heating Method | Dual-side resistive heating with Kanthal A1 wire embedded in ceramic fiber grooves |
| Insulation | Low-mass ceramic fiber insulation |
| Temperature Uniformity | ±5 °C at 1200 °C (per ASTM E220) |
| Control System | Eurotherm 2416 PID programmable controller with dual-line display |
| Programmable Segments | 8 segments, each configurable for ramp, soak, cooling or end |
| Temperature Sensor | Type R (Platinum–Platinum/Rhodium 13%) thermocouple |
| Power Rating | 2.0 kW (BCF13/5) |
| External Construction | Galvanized steel housing with polyester powder coating |
| Weight | 41 kg (net, BCF13/5) |
| Compliance | CE, UKCA, RoHS, EN 61000-6-3, EN 61000-6-4 |
| Brand | KJG (Hefei Kejing) |
|---|---|
| Origin | Anhui, China |
| Model | GSL-1700X-MGI-4 |
| Maximum Temperature | 1700 °C |
| Control Accuracy | ±1 °C |
| Total Power | 6 kW |
| Heating Rate (to max temp) | 10 °C/min |
| Tube Dimensions | Φ25 mm OD × 460 mm L (4×) |
| Constant-Temperature Zone | 30 mm (±1 °C), 60 mm (±5 °C) |
| Vacuum Capability | 10⁻⁵ torr (with turbomolecular pump) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (4× independent) |
| Voltage | 208–240 V AC, single-phase, 50/60 Hz |
| Certifications | CE, UL/MET/CSA compliant components (>24 V), TÜV/CAS optional upon request |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-5L-UL |
| Maximum Temperature | 1200°C |
| Temperature Uniformity | ±5°C (within 250 × 250 × 250 mm at 1000°C, 3-h hold) |
| Control Accuracy | ±1°C |
| Heating Rate | 20°C/min (to max temp) |
| Internal Chamber Dimensions | 400 × 400 × 400 mm |
| Chamber Volume | 64 L |
| Rated Power | 8.8 kW |
| Voltage | AC 208–240 V, single-phase, 50/60 Hz |
| Heating Element Material | Molybdenum-doped Fe-Cr-Al alloy |
| Chamber Lining | High-purity alumina fiber with US-imported high-temperature alumina coating |
| Floor Load Capacity | 100 kg (supported by embedded SiC plate) |
| Cooling | Dual-layer housing with forced-air cooling (outer surface <60°C) |
| Safety | Dual K-type super-thermocouples (OMEGA), independent control & alarm circuits, UL/MET/CSA certified components (>24 V), CE compliant |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SFM-2 |
| Rated Voltage | AC 220 V |
| Rated Power | 220 W |
| Speed Control | PID Closed-Loop Speed Regulation |
| Drive Mechanism | Nylon Gear Transmission |
| Revolution Speed (Turntable) | 0–100 rpm |
| Rotation Speed (Jar) | 0–300 rpm |
| Dimensions (W×D×H) | 450 × 490 × 530 mm |
| Net Weight | 55 kg |
| Standard Jar Capacity | 4 × 500 mL |
| Jar Materials | Stainless Steel or Nylon |
| Ball Diameters | 6, 10, 12, 15, 20 mm |
| Minimum Final Particle Size | ≤ 0.1 µm (100 nm) |
| Compliance | CE-marked per EN 61000-6-2 / EN 61000-6-4 |
| Brand | KJG |
|---|---|
| Origin | Anhui, China |
| Model | OTF-1200X-V |
| Max Temperature | 1200 °C |
| Continuous Operating Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Heating Rate (to max temp) | ≤20 °C/min |
| Total Power | 6 kW |
| Input Voltage | AC 208–240 V, 50/60 Hz, Single-Phase (40 A circuit breaker required) |
| Chamber Dimensions | 50 mm OD × 44 mm ID × 1400 mm L (standard) |
| optional quartz tubes | 60/54, 80/74, 100/94 mm OD/ID × 1400 mm L |
| Heating Zones | Five independent 152 mm zones |
| Effective Isothermal Zone | 635 mm (when all zones set to same temperature) |
| Thermocouple Type | K-type Omega-certified |
| Control Method | PID with 30-segment programmable ramp-soak profiles |
| Insulation | High-purity alumina fiber + US-imported high-temp alumina coating |
| Cooling | Dual-layer air-cooled housing (surface temp <60 °C) |
| Certification | CE compliant |
| Warranty | 12 months (excludes consumables: quartz tube, heating elements, silicone O-rings) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FP-25 / FP-40 |
| Voltage/Power | 220 V AC, 2500 W (FP-25) / 4000 W (FP-40) |
| Chamber Dimensions | 200 × 120 × 80 mm (FP-25) / 300 × 200 × 120 mm (FP-40) |
| Maximum Operating Temperature | 1000 °C |
| Insulation Material | High-Purity Alumina-Silica Ceramic Fiber (≥1260 °C rated) |
| External Casing | Cold-Rolled Steel with Epoxy Powder Coating |
| Compliance | CE-marked per EN 61000-6-3 (EMC) and EN 61000-6-4 |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | FP-40 |
| Voltage/Power | 220 V / 4000 W |
| Chamber Dimensions (W×D×H) | 300 × 200 × 120 mm |
| Maximum Operating Temperature | 1000 °C |
| Construction | Cold-Rolled Steel Outer Casing + High-Density Ceramic Fiber Insulation |
| Compliance | CE-marked per IEC 61000-6-3 (EMC) and IEC 61000-6-2 (Immunity) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTF11 |
| Pricing | Available Upon Request |
| Max Operating Temperature | 700 °C |
| Heating Chamber Dimensions (D×L) | 11 cm × 20 cm |
| External Dimensions (L×W×H) | 40 cm × 30 cm × 30 cm |
| Controller Dimensions (L×W×H) | 30 cm × 25 cm × 30 cm |
| Thermocouple Type | J-Type |
| Heating Element Material | Kanthal A-1 |
| Power Supply | 220 V, 50 Hz, 30 A |
| Rated Power at 700 °C | ~2 kW |
| Temperature Control | PID Algorithm with SCR Power Regulation |
| Cooling Method | Integrated Water-Cooling System |
| Atmosphere Options | Ambient Air, Vacuum, Inert/Reactive Gas (User-Specified), Atmospheric Pressure Range: 0–101.3 kPa |
| Mass | ~1 kg |
| Temperature Uniformity & Stability | ±0.5 °C at Setpoint (Center Zone, Steady-State) |
| Origin | USA |
|---|---|
| Type | Box-type muffle furnace |
| Model | E14 |
| Maximum Temperature | 1093°C |
| Temperature Uniformity | ±3°C |
| Rated Power | 3120 W |
| Internal Dimensions (W×D×H) | 331 × 343 × 223 mm |
| Heating Element | Kanthal A1 resistance wire |
| Insulation | 150 mm thick refractory ceramic fiber |
| Voltage/Frequency | 230 V / 50 Hz |
| Compliance | CE, UL Listed (per UL 746A & UL 1286) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GR 1300/13 |
| Quotation | Upon Request |
| Max Temperature | 1300 °C |
| Heating Length | 1300 mm |
| Heating Zones | 6 independent zones (each 160 mm) |
| Max Achievable Axial Temperature Gradient | 400 °C |
| Internal Dimensions (W×D×H) | 1300 × 100 × 60 mm |
| External Dimensions (W×D×H) | 1660 × 740 × 1345 mm |
| Power Rating | 18 kW |
| Electrical Supply | 3-phase |
| Net Weight | 300 kg |
| Heating Method | Radiant heating via resistance wire wound on ceramic support tubes |
| Loading Access | Top or front door |
| Optional Accessory | Ceramic fiber partition boards for zone isolation |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | GSL-1800X-PGEP |
| Instrument Type | Tube Furnace |
| Max Temperature | 1800 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2.5 kW |
| Heating Rate | 5 °C/min (T < 1600 °C) |
| Heating Element | Kanthal Super 1900-grade MoSi₂ Rods |
| Tube Dimensions | ID 54 mm × OD 60 mm × L 1200 mm |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | SX-4-10 |
| Instrument Type | Box-Type Resistance Furnace |
| Rated Temperature | 1000 °C |
| Rated Power | 4.0 kW |
| Voltage Supply | 220 V AC |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (L × W × H) |
| Net Weight | 108 kg |
| External Dimensions (D × W × H) | 700 × 465 × 535 mm |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Crystal Structure | Hexagonal (α-Al₂O₃) |
| Lattice Parameters | a = 4.758 Å, c = 12.992 Å |
| Orientation Options | C-plane (0001), A-plane (11–20), M-plane (10–10), R-plane (1–102) |
| Purity | >99.99% |
| Melting Point | 2040 °C |
| Density | 3.98 g/cm³ |
| Mohs Hardness | 9 |
| Thermal Expansion Coefficient | 7.5 × 10⁻⁶ /°C |
| Thermal Conductivity | 46.06 W/(m·K) @ 0 °C, 25.12 W/(m·K) @ 100 °C, 12.56 W/(m·K) @ 400 °C |
| Dielectric Constant | ~9.4 (a-axis), ~11.58 (c-axis) @ 300 K |
| Loss Tangent | <2×10⁻⁵ (a-axis), <5×10⁻⁵ (c-axis) |
| Surface Finish | Single- or double-side polished, Ra < 0.5 nm |
| Dimensional Tolerance | ±0.2° orientation, ±0.05 mm thickness |
| Standard Packaging | Class 1000 cleanroom assembly, Class 100 clean bags or individual substrate carriers |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | GSL-1700X-VT |
| Type | Vertical Tube Furnace |
| Max Temperature | 1700 °C (≤1 h) |
| Control Accuracy | ±1 °C |
| Max Power | 4 kW |
| Heating Rate to Max Temp | 10 °C/min |
| Heating Element | Four U-shaped MoSi₂ Rods |
| Chamber Dimensions | OD 60 mm × ID 54 mm × L 800 mm |
| Certification | CE, UL/MET/CSA (components >24 V), TUV/CAS optional |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | GSL-3F |
| Price | Upon Request |
| Gas Channels | 6 (customizable from 1–8) |
| Flow Controllers | Thermal Mass Flow Controllers (MFCs) |
| Standard Full-Scale Ranges (N₂) | 200 SCCM, 500 SCCM |
| Accuracy | ±1.5% FS |
| Linearity | ±0.5–1.5% FS |
| Repeatability | ±0.2% FS |
| Response Time (Gas) | 1–4 s |
| (Electrical) | ≤10 s |
| Operating Differential Pressure Range | 0.1–0.5 MPa |
| Maximum Inlet Pressure | 3 MPa |
| Tubing | Stainless Steel SS316, OD 6 mm × ID 4 mm |
| Pressure Gauge Range | –0.1 to +0.15 MPa, Graduation: 0.01 MPa |
| Shut-off Valves | 6 × Φ6 mm High-Pressure Manual Valves |
| Display | 4-Digit LED Digital Readout |
| Operating Ambient Temperature | 5–45 °C |
| Compatible Gases | High-Purity Inert, Reducing, and Oxidizing Gases (excluding simultaneous H₂/O₂) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | GZK-101 |
| Ultimate Vacuum | 1.0 × 10⁻¹ Pa |
| Primary Pump | 2TW-4C Rotary Vane Mechanical Pump (Pumping Speed: 4 L/s |
| Ultimate Pressure | 5 × 10⁻¹ Pa |
| Motor Power | 400 W) |
| Digital Vacuum Gauge | Range 10⁻⁴–1000 Torr |
| Operating Ambient | 5–32 °C, RH ≤ 85 % |
| Power Supply | 220 V ±10 %, 50–60 Hz |
| Total System Power Consumption | 1 kW |
| Compliance | ISO 14001-aligned environmental safety |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1100X-S-H |
| Furnace Type | Box Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 700 W |
| Heating Rate (to max temp) | 20 °C/min |
| Internal Chamber Dimensions | 100 × 100 × 100 mm |
| Voltage | 220 V, 50/60 Hz, Single Phase |
| Continuous Operating Temp | 1000 °C |
| Intermittent Max Temp | 1200 °C (<30 min) |
| Thermocouple Type | K |
| Heating Element | Mo-doped Fe–Cr–Al Alloy |
| Insulation | High-purity Al₂O₃ Fiber with High-temp Al₂O₃ Coating |
| Door Mechanism | Top-hinged downward-opening with auto power cutoff |
| Vacuum Compatibility | Yes (with quartz tube & SS flange) |
| Vacuum Gauge | Digital display gauge included |
| Temperature Controller | PID-based with auto-tuning, 30-segment programmable ramp/soak profile |
| Safety Features | Over-temperature protection, thermocouple break detection |
| Certifications | CE, UL/MET/CSA compliant (>24 V components), NIST-traceable portable thermometer (USB/RS232) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-H |
| Furnace Type | Hybrid Box-and-Tube Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 3.5 kW |
| Ramp Rate (to max temp) | 20 °C/min |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (12″ × 8″ × 5″) |
| Heating Elements | Top & dual-side mounted |
| Insulation | High-purity alumina fiber with high-temp alumina coating |
| Cooling | Dual-shell structure with forced-air cooling |
| Surface Temp (operational) | <60 °C |
| Vacuum Capability | 10⁻³ Torr (mechanical pump), 10⁻⁵ Torr (turbo-molecular pump) |
| Tube Configuration | Two Φ50 × 600 mm fused quartz tubes with single-end seal |
| Sealing | Two stainless-steel KF25 vacuum flanges with mechanical pressure gauges, 1/4″ armored thermocouple ports |
| Viewing Window | 0.5″ fused quartz viewport on door |
| Safety | Door-interlocked power cutoff |
| Controller | FA-YD518P-AG PID temperature controller with 30-segment programmable ramp/soak, auto-tuning, over-temperature & thermocouple-failure alarms |
| Communication | DB9 RS-232 port |
| Optional Software | MTS02-Y PC-based temperature logging & control (supports real-time curve display & export) |
| Optional Controller | Eurotherm 3504 (LabVIEW-compatible) |
| Certifications | CE, UL/MET/CSA compliant for all >24 V components, RoHS compliant |
| Net Weight | 50 kg |
| External Dimensions | 635 × 670 × 535 mm (D × W × H) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1200X-J (4.2 L) |
| Max Temperature | 1200°C |
| Temperature Uniformity | ±1°C |
| Heating Rate to Max Temp | 20°C/min |
| Rated Power | 2.5 kW |
| Internal Chamber Dimensions | 150 mm × 155 mm × 180 mm (4.2 L) |
| Heating Element | Mo-doped Fe-Cr-Al alloy with ZrO₂ coating |
| Insulation | High-purity alumina fiber + Al₂O₃ reflective coating |
| Cooling System | Dual-shell air-cooled jacket |
| Certifications | CE, UL/MET/CSA compliant (>24 V components), TÜV/CAS optional |
| Brand | Hefei Kejing |
|---|---|
| Model | KSL-1700X-A4 |
| Maximum Temperature | 1700 °C |
| Operating Temperature | ≤1650 °C |
| Chamber Dimensions (W×D×H) | 300 mm × 400 mm × 300 mm |
| Effective Volume | 36 L |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Temperature Control | 30-Stage Programmable Controller (708P) |
| Thermocouple Type | Type B (PtRh30–PtRh6) |
| Accuracy | ±1 °C at steady state |
| Max. Ramp Rate | 10 °C/min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 15 kW |
| External Dimensions | 650 mm × 760 mm × 1550 mm |
| Net Weight | 140 kg |
| Door Configuration | Side-opening |
| Certifications | CE |
| Brand | Hefei Kejing |
|---|---|
| Model | KSL-1700X-S |
| Maximum Temperature | 1700 °C |
| Operating Temperature | Up to 1650 °C |
| Temperature Uniformity | ±1 °C |
| Heating Rate (to max temp) | 10 °C/min |
| Chamber Dimensions (W×D×H) | 120 mm × 120 mm × 120 mm |
| Heating Element | Molybdenum Disilicide (MoSi₂) Rods |
| Thermocouple Type | Type B (Platinum–Rhodium 30/6) |
| Control System | 30-Stage Programmable PID Controller (518P Series) |
| Rated Power | 2.5 kW |
| Voltage/Frequency | AC 220 V / 50 Hz |
| External Dimensions | 380 mm × 410 mm × 620 mm |
| Net Weight | 30 kg |
| Certification | CE |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1750X-A1 |
| Maximum Temperature | 1750 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 3 kW |
| Heating Rate (to Max Temp) | 10 °C/min |
| Internal Chamber Dimensions | 150 × 150 × 150 mm |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (Pt–30%Rh / Pt–6%Rh) |
| Control System | 30-Stage Programmable PID Controller (518P) |
| Chamber Lining | Polycrystalline Alumina Fiber with US-Imported 1750 °C Alumina Reflective Coating |
| Certification | CE, UL/MET/CSA (components >24 V), Optional TÜV or CSA Single-Unit Certification Available |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1750X-A2 |
| Max Temperature | 1750 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate (to max temp) | 10 °C/min |
| Chamber Dimensions | 200 L × 200 W × 200 D mm |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Thermocouple Type | Type B (Pt–30%Rh / Pt–6%Rh) |
| Controller | 30-Stage Programmable PID with 708P Interface |
| Insulation | Polycrystalline Alumina Fiber with US-Imported 1750 °C Al₂O₃ Reflective Coating |
| External Dimensions | 820 × 460 × 545 mm |
| Net Weight | 140 kg |
| Certification | CE |
| Compliance | Designed per IEC 61000-6-3 (EMC), IEC 61000-6-2 (Immunity), and EN 60519-1 (Electrical Safety for Industrial Electroheating Equipment) |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | KSL-1800X-S |
| Furnace Type | Box-type Muffle Furnace |
| Max Temperature | 1800 °C (≤2 h) |
| Continuous Operating Temperature | ≤1750 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.5 kW |
| Heating Rate to Max Temp | 10 °C/min |
| Heating Element | Kanthal Super-1900 MoSi₂ Rods |
| Internal Chamber Dimensions | 120 × 120 × 120 mm |
| Chamber Lining | Zirconia-Stabilized Alumina Fiber |
| Thermocouple Type | Type B Dual Platinum-Rhodium (Pt–30%Rh / Pt–6%Rh) |
| Control System | 30-Stage Programmable PID Controller |
| Power Supply | AC 220 V, 50 Hz |
| External Dimensions | 380 × 410 × 620 mm |
| Net Weight | 30 kg |
| Safety Certifications | CE, UL/MET/CSA (components >24 V), optional TÜV or CSA single-unit certification available upon request |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | MSK-AFA-III |
| Instrument Type | Benchtop Box-Type Coating & Drying System |
| Max Temperature | 200°C |
| Temperature Control Accuracy | ±1°C |
| Max Heating Power | 1500 W |
| Max Ramp Rate | 10°C/min |
| Push Rod Travel | 10–250 mm (adjustable) |
| Push Rod Speed | 0–100 mm/sec (adjustable, ±10 mm/sec repeatability) |
| Vacuum Platen Dimensions | 365 mm × 200 mm (Aluminum) |
| Coater Blade Width | 100 mm (adjustable gap: 0.01–3.5 mm) |
| Overall Dimensions | 550 mm × 330 mm × 320 mm (L×W×H) |
| Certification | CE |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Rod Extraction Machine for Sapphire |
| Spindle Motor Power | 7.5 kW |
| Servo Motors (X/Y/Z) | 2.5 kW / 2.5 kW / 2.5 kW |
| X-Axis Travel | 1020 mm |
| Y-Axis Travel | 510 mm |
| Z-Axis Travel | 635 mm |
| Spindle Nose to Table Distance | 100–735 mm |
| Table Size | 1220 mm × 520 mm |
| T-Slot Specification | 18 mm × 5 slots × 100 mm pitch |
| Maximum Load Capacity | 800 kg |
| Rapid Traverse Rates (X/Y/Z) | 20 / 20 / 18 m/min |
| Machine Dimensions | 2880 mm × 2540 mm × 2756 mm |
| Footprint | 4500 mm × 3000 mm |
| Net Weight | 6000 kg |
| Cutting Speed | 3–5 mm/min (sapphire-specific) |
| Compatible Tool Length | up to 360 mm |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Model | Single-Wafer Cassette |
| Dimensions (Φ2") | 60 mm Ø × 11 mm H |
| Dimensions (Φ4") | 110 mm Ø × 12 mm H |
| Dimensions (Φ6") | 160 mm Ø × 16 mm H |
| Material | Semi-Transparent Polypropylene (PP) or Polycarbonate (PC), Chemically Resistant & Autoclavable |
| Configuration | One-piece cassette body with hinged lid and integrated elastomeric wafer retention fingers |
| Compliance | Designed for Class 100–Class 1000 cleanroom environments per ISO 14644-1 |
| Brand | Heller |
|---|---|
| Origin | USA |
| Model | Mark III |
| Instrument Type | Box-type Reflow/Curing Oven |
| Max Temperature | 400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2500 W |
| Heating Rate to Max Temp | 15 min |
| Heating Method | Resistive Wire Heating |
| Internal Chamber Dimensions | 450 × 150 × 180 mm |
| Compliance | SMEMA-compatible |
| Cooling | Water-cooled BlowThru Module |
| Flux Recovery | Integrated Drain Tube with Collection Jar |
| Vacuum Option | Optional Vacuum Module (Model 755 compatible) |
| Nitrogen Atmosphere | Optional |
| Conveyor Width Range | 75–250 mm |
| Cycle Time Range | 7.5 min to several hours |