NDT Instruments/Equipment
Filter
Showing 451–480 of 484 results
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YT-610 |
| Magnetization Modes | AC Circumferential (0–2000 A, continuously adjustable with phase-controlled power-off) |
| Longitudinal Magnetization Force | AC 0–24,000 AT, continuously adjustable with phase-controlled power-off |
| Magnetization Configurations | Circumferential, Longitudinal, or Composite |
| Powder Application Method | Dry Powder |
| Demagnetization Residual Field | ≤0.2 mT |
| Inspection Cycle Time | 6 seconds per component |
| Continuous Operating Duration | >4 hours |
| Structural Design | Hand-Carried Yoke Configuration |
| Primary Application Sector | Rail Transportation Infrastructure |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YT-610C |
| Magnetization Modes | Circumferential (AC 0–2000 A, phase-controlled cutoff), Longitudinal (AC 0–24,000 AT, phase-controlled cutoff), Composite |
| Configuration | Portable, Handheld Yoke System |
| Magnetization Method | Dry Powder MPI |
| Circumferential Magnetizing Current | AC 0–2000 A, continuously adjustable with phase-angle control for precise demagnetization timing |
| Longitudinal Magnetomotive Force | AC 0–24,000 AT, continuously adjustable with phase-angle control |
| Inspection Cycle Time | ≤6 seconds per component |
| Residual Field After Demagnetization | ≤0.2 mT |
| Continuous Operating Duration | >4 hours |
| Input Voltage | AC 220 V ±10% |
| Output Voltage | AC 36 V (safety-isolated) |
| Output Current | >10 A |
| Lifting Power | ≥5 kg (AC), ≥18 kg (DC for optional probes) |
| Duty Cycle | 50% |
| Sensitivity Verification | Clear indication of ASTM E1444-compliant A1-30/100 shim test piece |
| Dimensions (H×W×D) | 230 × 160 × 120 mm |
| Weight | 5 kg |
| Probe Compatibility | Standard A-type yoke (adjustable pole spacing 0–250 mm), optional E-type (cross-yoke), D-type (high-lift yoke), O-type (circular coil, Φ150 mm, 1800 TA) |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | YT-610C |
| Magnetization Modes | Circumferential (AC 0–2000 A, phase-controlled cutoff), Longitudinal (AC 0–24,000 AT, phase-controlled cutoff), Composite |
| Inspection Cycle Time | ≤6 s per part |
| Residual Field After Demagnetization | ≤0.2 mT |
| Continuous Operating Duration | >4 h |
| Input Voltage | AC 220 V ±10% |
| Output Voltage | AC 36 V |
| Output Current | >10 A |
| Lifting Force | ≥5 kgf |
| Duty Cycle | 50% |
| Sensitivity | Clear indication of ASTM E1444/E709 A1-30/100 shims |
| Probe Configurations | Electromagnetic Yoke (adjustable pole spacing: 0–250 mm), Horseshoe Probe (0–160 mm), Circular Coil (Φ150 mm, 1800 TA) |
| Dimensions (L×H×W) | 230×160×120 mm |
| Weight | 5 kg |
| Brand | YXLON International GmbH |
|---|---|
| Origin | Germany |
| Model | Cheetah |
| Detector | High-Speed Flat-Panel (130 × 130 mm FOV) |
| Max Geometric Magnification | 2,000× (up to 3,000× with μHD module) |
| System Magnification | up to 25,500× |
| Spatial Resolution | <1.0 µm (microfocus mode), <0.3 µm (nanofocus mode) |
| X-ray Tube Power | up to 10 W (target), stable focus at 7 W |
| Tilt Range | −72.5° to +72.5° (detector), optional 360° rotation & ±30° sample tilt |
| CNC Automation | Standard |
| CT Scan Time | ≤60 s (Y.QuickScan™) |
| Software Platform | FGUI v6.x (64-bit Windows OS supported) |
| Compliance | Designed for ISO/IEC 17025, ASTM E1441, and GLP/GMP-aligned workflows |
| Brand | YXLON International GmbH |
|---|---|
| Origin | Germany |
| Model | Cougar EVO |
| Detector Type | Flat-Panel Digital Detector (42 × 42 mm FOV) |
| Max. Geometric Magnification | 2000× |
| Gray Levels | 65,000 |
| Display | 20" LCD Monitor |
| Max. Sample Dimensions | 440 × 550 mm |
| Max. Inspection Area | 310 × 310 mm |
| Motion Axes | X/Y Translation, X-ray Tube Z-Adjustment, Detector Z-Adjustment, Detector Tilt (±72.5°), Optional Rotary Stage (360°), Optional Manual Sample Tilt/Rotate (±30°) |
| CT Acquisition Time | ≤3 min per scan |
| Spatial Resolution (2D) | <1.0 µm |
| Software | FGUI with CNC Automation, BGA Void Analysis, and μCT Reconstruction Engine |
| Upgrade Path | Field-upgradable to full micro-CT capability |
| Brand | YXLON |
|---|---|
| Origin | Germany |
| Model | FF65 CL |
| Detector Type | Image Intensifier-Based Laminography Detector |
| Sample Diameter | 795 mm |
| Sample Height | 20 mm |
| Max Sample Weight | 2 kg |
| System Dimensions | 1760 × 2000 × 2000 mm |
| CT Mode | Super-High-Resolution Computed Laminography (CL) |
| Manipulation | Super-Precise Manipulator with Active Anti-Vibration System |
| Vacuum Sample Hold Mechanism | Integrated |
| Effective Detection Area | 510 × 610 mm |
| X-ray Source | Next-Generation Nanofocus Tube (≤ 300 nm focal spot) |
| Brand | YXLON |
|---|---|
| Origin | Germany |
| Model | FF70 CL |
| Detector Type | High-Sensitivity Image Intensifier with Nano-Focus X-ray Source |
| Max. Sample Diameter | 795 mm |
| Max. Sample Height | 150 mm |
| Max. Sample Weight | 2 kg |
| System Dimensions (W×D×H) | 1940 × 2605 × 2000 mm |
| CT Mode | Ultra-High-Resolution Computed Laminography (CL) |
| Manipulation | Ultra-Precise Active Anti-Vibration Manipulator |
| Minimum Resolvable Feature Size | <150 nm |
| Inspection Area | 510 × 610 mm |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | BOSELLO MAX |
| Quotation | Upon Request |
| Detector Type | Flat-Panel Detector (FPD) |
| Scan Mode | Translation-Rotation (TR) |
| Inspection Volume | 1700 × 1700 × 2200 mm to 2600 × 2600 × 2600 mm |
| Sample Weight Capacity | 80 – 250 kg |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | ZEISS BOSELLO OMNIA |
| Quotation | Upon Request |
| Detector Type | Flat-Panel Digital Radiography (DR) Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Maximum Inspection Volume | 1170 × 670 × 380 mm |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model Series | BOSELLO |
| Detector Type | High-Resolution CMOS Semiconductor Sensor |
| Scan Mode | Translation-Rotation (TR) |
| Accuracy | Nanometer-Level |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | BOSELLO WRE thunder |
| Detector Type | Flat-Panel Detector (FPD) |
| Scan Mode | Translation-Rotation (TR) |
| Inspection Field of View | 4″ × 13″ – 11″ × 22″ or 4″ × 14″ – 11″ × 26″ |
| Maximum Sample Weight | 50 kg |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic |
| Model | METROTOM 1 |
| Detector Type | Flat-Panel Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Accuracy | Micron-Level |
| Measurement Volume | 165 × 140 mm |
| Dimensional Measurement Uncertainty (MPE SD) | 5 µm + L/100 |
| System Dimensions | 1750 mm (W) × 1820 mm (H) × 870 mm (D) |
| Weight | 2100 kg |
| X-ray Source | 160 kV |
| Detector Resolution | 2500 × 2500 pixels |
| Minimum Voxel Size | 32.6 µm |
| Software | ZEISS INSPECT |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | METROTOM 1500 |
| Detector Type | Flat-Panel Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Accuracy | Micron-Level |
| Maximum Penetration | Up to 50 mm Steel Equivalent |
| Spatial Resolution | 4 µm |
| Measurement Volume | Ø770 mm × H1350 mm |
| Dimensional Measurement Uncertainty | (4.5 + L/50) µm |
| Sample Weight Capacity | 50 kg |
| System Dimensions (W×L×H) | 1810 × 3700 × 2440 mm |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic Production |
| Model | METROTOM 1500 |
| Quotation | Upon Request |
| Detector Type | Flat-Panel Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Accuracy | Micron-Level |
| Maximum Inspection Volume | Ø1500 mm × H870 mm |
| Sample Weight Capacity | 50 kg |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | METROTOM 6 scout |
| Pricing | Upon Request |
| Detector Type | Flat-Panel Detector |
| Scanning Mode | Translation-Rotation (TR) |
| Accuracy | Micron-Level |
| Maximum Field of View | 240 mm × 400 mm |
| Maximum Sample Weight Capacity | 4800 kg |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Model | VersaXRM 615 & VersaXRM 730 |
| Resolution | 500 nm (VersaXRM 615), 450 nm (VersaXRM 730) |
| Minimum Voxel Size | 40 nm |
| Imaging Modes | Absorption, Phase Contrast, Diffraction Contrast |
| In Situ Capability | 4D Dynamic Imaging |
| AI-Enhanced Reconstruction | ART Advanced Reconstruction Toolbox |
| Fast Scan Mode | Sub-60-second 3D scan |
| Compliance | Fully compatible with GLP/GMP workflows and ASTM E1441, ISO 15787, and USP <1089> for non-destructive 3D characterization |
| Brand | ZEISS |
|---|---|
| Origin | Germany |
| Detector Type | Scintillator-based Detector |
| Scan Mode | Translation-Rotation (TR) |
| Spatial Resolution | 0.5 µm |
| Minimum Voxel Size | 40 nm |
| Sample Dimensions (X/Y/Z) | 50 mm × 50 mm × 100 mm |
| Maximum Sample Weight | 25 kg |
| Dual Magnification Architecture | Optical + Geometric |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | Aisida XG5000 Series |
| Price Range | USD 28,000 – 70,000 |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | CC5120 |
| Pricing | Upon Request |
| Overall Dimensions (L×W×H) | 2100 × 1500 × 1900 mm |
| Power Supply | AC 220 V / 50 Hz / 2 kW |
| Inspection Throughput | ≥25 parts per minute (PPM) |
| Repeatability & Reproducibility (GRR) | ≤10% |
| Applicable Cell Dimensions (L×W×T) | 40–160 mm × 30–110 mm × 2–12 mm |
| Dimensional Repeatability | ±0.01 mm |
| PPG Flatness | ≤10 µm |
| PPG Parallelism | ≤20 µm |
| Barcode Types Supported | 1D & 2D barcodes |
| Barcode Recognition Rate | ≥99.8% |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | DY5120 |
| Power Supply | AC 220 V / 50 Hz / 2.5 kW |
| Overall Dimensions (L×W×H) | 2600 × 1700 × 2000 mm |
| Test Throughput | ≥30 PPM |
| Voltage Measurement Accuracy | ±0.01% rdg + 3 digits |
| Internal Resistance Measurement Accuracy | ±0.5% rdg + 5 digits |
| Barcode Recognition Rate | ≥99.8% |
| Supported Barcode Types | 1D & 2D barcodes |
| Applicable Cell Dimensions (L×W×T) | 40–160 mm × 30–110 mm × 2–12 mm |
| Gage R&R (GRR) | ≤10% |
| False Rejection Rate | 0.0% |
| Repeatability & Reproducibility | GRR ≤10% |
| Control System | HMI-integrated PLC with servo-driven motion control |
| Vision System | CCD-based positioning and alignment |
| Automation Architecture | 4-axis robotic handling platform |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | FX001 |
| Quotation | Upon Request |
| Dimensions (L×W×H) | 5200 × 1500 × 1850 mm |
| Power Supply | AC 220 V / 50 Hz / 3 kW |
| Throughput | ≥25 ppm |
| GRR (Repeatability & Reproducibility) | ≤10% |
| Applicable Cell Dimensions (L×W×T) | 40–160 mm × 30–110 mm × 2–12 mm |
| Voltage Measurement Accuracy | ±0.01% rdg ±3 digits |
| Resistance Measurement Accuracy | ±0.5% rdg ±5 digits |
| Barcode Types Supported | 1D & 2D |
| Barcode Recognition Rate | ≥99.8% |
| Changeover Time | ≤60 min |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | JuanraodianchiXRAY |
| Pricing | Available Upon Request |
| Brand | Zhengye |
|---|---|
| Model | XG5600 |
| X-ray Tube Voltage | Up to 130 kV |
| X-ray Tube Current | Up to 309 µA |
| Focal Spot Size | 5–7 µm |
| Imaging Method | Time-Delay Integration (TDI) Line-Scan Detector |
| Repeatability Accuracy | ±60 µm |
| Throughput | ≥120 ppm |
| False Positive Rate | ≤3% |
| Miss Detection Rate | 0.0% |
| Overall Yield Rate | ≥99.5% |
| Radiation Leakage | ≤1 µSv/hr (compliant with IEC 61000-6-4 & IEC 62471) |
| Power Supply | AC 220 V / 50 Hz |
| Operating Environment | 23 °C ±5 °C, Relative Humidity ≤10% RH |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | X-Ray Component Counter |
| Quotation | Available Upon Request |
| Dimensions (L×W×H) | 1430 × 848 × 1950 mm |
| Power Supply | 220 V, 10 A, 50–60 Hz |
| Control System | Industrial PC with Windows 10 64-bit OS |
| Compatible Tray Sizes | 7″–15″ (178–381 mm), Stack Height: 6–80 mm |
| X-ray Source | Low-energy side-window microfocus tube, 50 kV nominal voltage, 0–1000 µA adjustable current, max. 50 W output power |
| Detector | Flat-panel detector, FOV: 434 × 434 mm, Pixel Matrix: 3072 × 3072, Spatial Resolution: 3.6 lp/mm |
| Radiation Leakage | <1 µSv/hour at 5 cm from enclosure surface |
| Safety Interlock | Dual-interlocked safety door (X-ray emission disabled when open) |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic |
| Model | Zhengye X-ray Inspection System |
| Pricing | Available Upon Request |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | Zhengye X-ray Inspection Machine |
| Pricing | Available Upon Request |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Automatic Loading & Unloading System for X-ray Target Drilling |
| Price Range | USD $68,000 – $136,000 (FOB Guangdong) |
| Configuration | Mobile or Fixed Mounting Options |
| Radiation Geometry | Circumferential (360°) |
| Radiation Beam Angle | 180° |
| Penetration Capability | High-Energy X-ray Compatible (Designed for ≥160 kV Industrial X-ray Sources) |
| Focus Size | Custom-Optimized (Configurable per X-ray Tube Integration) |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | XG5000 |
| Pricing | Upon Request |
| X-ray Tube | Sealed, integrated high-voltage source |
| Tube Voltage | 90 kV |
| Tube Current (max) | 200 µA (software-limited to 89 µA) |
| Cooling | Forced-air |
| Geometric Magnification | 12×–48× |
| X-Y-Z Travel Range | 400 mm × 450 mm × 150 mm |
| Image Intensifier FOV | 2″ / 4″ |
| Spatial Resolution | 75–110 lp/cm |
| Radiation Leakage | ≤1 µSv/hr (per IEC 61331-1 & ISO 4037) |
| System Dimensions | 1028 × 1025 × 1840 mm |
| Weight | ~760 kg |
| Power Supply | AC 250 V, 10 A |
| Operating Temperature | 22 ± 3 °C |
| Compliance | CE, RoHS, GB/T 18871-2002 (China National Radiation Safety Standard) |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | XG5010 |
| Pricing | Upon Request |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | XG5010 Series |
| Pricing | Upon Request |