Online Automatic Water Quality Monitoring System
Filter
Showing 91–120 of 231 results
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | MS8000 Series Online Automatic Water Quality Analyzer |
| Pricing | Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Status | Manufacturer |
| Measurement Principle | UV Absorption (Dual-Beam, 210 nm) |
| Optical Path Lengths | 1 mm, 2 mm, 5 mm |
| NO₃–N Range | 0.1–100.0 mg/L (1 mm), 0.1–50.0 mg/L (2 mm), 0.1–25.0 mg/L (5 mm) |
| LOD (NO₃–N) | 0.1 mg/L (typical) |
| Accuracy | ±3% ±0.5 mg/L (1 mm), ±5% ±1.0 mg/L (2 mm), ±5% ±0.5 mg/L (5 mm) |
| Resolution | 0.1 mg/L or 0.5 mg/L depending on configuration |
| Sludge Compensation | Yes |
| Measurement Interval | 1 min or 5 min |
| Response Time (T₁₀₀) | ≤1 min (1 mm path), ≤15 min (2 mm path) |
| Installation Options | Immersion & Flow-Through Cell |
| Housing Material | Stainless Steel (316L), Dual-Sealed or Single-Sealed variants |
| Calibration | Standard Solution-Based |
| Maintenance Interval | Every 6 months |
| Operating Temperature | 2–40 °C |
| Max Submersion Depth | 2 m (0.5 bar) |
| Probe Cable Length | 10 m (extendable) |
| Dimensions (L × D) | 33.3 × 7.0 cm, 32.7 × 7.0 cm, or 32.3 × 7.5 cm |
| Self-Cleaning Function | Integrated ultrasonic or mechanical wiper (model-dependent) |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | NT3100 Nitrate Online Analyzer / NT3200 Nitrate & Nitrite Dual-Parameter Online Analyzer |
| Measurement Principle | UV Absorption Spectrophotometry (220 nm & 275 nm dual-wavelength correction) |
| Optical Path Options | 1 mm, 2 mm, 5 mm flow-through sensor cells |
| Detection Limit | 0.02 mg/L NO₃⁻-N (NT3100, 5 mm path) |
| Compliance | Designed for continuous operation in drinking water, surface water, wastewater, and industrial process water applications per ISO 15839, EN 14181 (QAL1/QAL2), and US EPA Method 353.2 principles |
| Maintenance Interval | Up to 3 months between cleanings (with optional auto-brush cleaning module) |
| Output | 4–20 mA analog, Modbus TCP/RTU, Ethernet/IP, optional onboard data logging |
| Brand | HACH |
|---|---|
| Model | OWF-100 |
| Measurement Principle | UV Fluorescence |
| Range | 0–2.0 mg/L and 0–10 mg/L (selectable) |
| Repeatability | ±7% FS |
| Stability | ±5% FS/day (in deionized water) |
| Response Time | T90 = 3 min |
| Sample Temperature | 0–30 °C |
| Sample Pressure | 0.02–0.3 MPa |
| Sample Flow Rate | 2–7 L/min |
| Ambient Operating Temperature | 0–45 °C |
| Analog Output | 4–20 mA, max. load 600 Ω |
| Power Supply | 220 VAC ±10%, 50/60 Hz |
| Power Consumption | ~50 VA |
| Dimensions (W×H×D) | 300 × 1500 × 500 mm |
| Weight | 40 kg |
| Installation | Indoor only |
| Optical Design | Windowless full-flow measurement cell |
| Maintenance | No moving parts, reagent-free operation |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin Category | Imported |
| Model | HACH Polymetron NA9600 sc |
| Pricing | Upon Request |
| Brand | HACH |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | SC100 |
| Pricing | Available Upon Request |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | SC1000 |
| Operating Temperature | -20–55°C, 0–95% RH (non-condensing) |
| Storage Temperature | -20–70°C, 0–95% RH (non-condensing) |
| Power Supply | 100–230 VAC, 50/60 Hz |
| Display | 1/4 VGA color TFT touchscreen with backlight |
| Relays | 4 × SPDT |
| Analog Outputs | 4–20 mA (max. 500 Ω load, up to 12 expandable) |
| Analog Inputs | 12 × 4–20 mA (500 Ω max. per channel) |
| Digital Communications | Modbus RTU (RS-485 & RS-232), PROFIBUS DP, Ethernet (standard), GSM cellular module option |
| Brand | HACH |
|---|---|
| Model | SP510 |
| Measurement Principle | Colorimetric (Titanium Yellow Method) |
| Range | 0.3–100 mg/L as CaCO₃ |
| Accuracy | ±10% of setpoint (0.3–2 mg/L), ±4% of setpoint (5–100 mg/L) |
| Cycle Time | ~2 minutes per measurement |
| Alarm Outputs | 1 SPDT relay |
| Power Supply | 115/230 VAC, 50/60 Hz |
| Certifications | UL, CSA, CE |
| Reagent Consumption | Up to 2 months per reagent pack |
| Maintenance Interval | Pump tube replacement every 6 months |
| Calibration | Automatic zero and span calibration supported |
| Compliance | Designed for continuous operation in industrial water treatment environments per ISO 9001-manufactured quality system |
| Brand | HACH |
|---|---|
| Model | TC2300 |
| Type | Online Optical Particle Counter |
| Origin | Imported (USA-manufactured) |
| Manufacturer | HACH Company, a Danaher Corporation business |
| Particle Detection Principle | Light Obscuration (LO) / Single-Particle Optical Sizing (SPOS) |
| Measurement Channels | 8 user-selectable size thresholds |
| Flow Control | Integrated precision peristaltic sampling pump with adjustable flow rate (typically 20–60 mL/min) |
| Display | 7-inch full-color capacitive touchscreen interface |
| Compliance | Designed to support ASTM D6978-05 (for clean water), ISO 21501-4, and USP <788> & <789> particulate matter testing guidelines (when configured per application requirements) |
| Data Output | Modbus RTU/TCP, 4–20 mA analog outputs, optional Ethernet/IP or OPC UA integration |
| Enclosure Rating | IP65-rated NEMA 4X housing for industrial environments |
| Brand | HACH |
|---|---|
| Model | Txpro-2 |
| Measurement Principle | Quadruple-beam Optical Transmission/Scattering |
| Measurement Range (RD240/242) | 0–10 g/L |
| Measurement Range (RD260/262) | 0–25 g/L |
| Accuracy (RD240/242) | ±2% of reading or ±0.1 g/L, whichever is greater |
| Accuracy (RD260/262) | ±2% of reading or ±0.2 g/L, whichever is greater |
| Repeatability (RD240/242) | ±2% of reading or ±0.05 g/L, whichever is greater |
| Repeatability (RD260/262) | ±2% of reading or ±0.1 g/L, whichever is greater |
| Operating Temperature | –20 °C to +55 °C |
| Analog Outputs | Two isolated 0/4–20 mA outputs, max. load 800 Ω |
| Relays | Three SPDT relays, 2 A @ 250 VAC |
| Signal Averaging | Adjustable from 1 second to 5 minutes |
| Power Supply | 90–265 VAC, 50/60 Hz |
| Max. Power Consumption | 25 VA |
| Enclosure Rating | NEMA 4X (IP66) |
| Mounting | Pipe clamp for up to 50 mm OD pipe |
| Compliance | CE, UL 61010-1, CSA C22.2 No. 61010-1 |
| Dimensions | 144 × 144 × 150 mm |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer | HACH Company |
| Model | U53 |
| Measurement Principle | Ultrasonic Time-of-Flight (Pulse-Echo) |
| Range | 0.25–6.0 m |
| Depth Resolution | ±1 mm |
| Accuracy | ±0.5% of full scale |
| Repeatability | ±0.1% of full scale |
| Sensitivity | ±0.1% of full scale |
| Temperature Compensation Range | –40 to +80 °C |
| Operating Ambient Temperature | –20 to +60 °C |
| Output | Two independent 4–20 mA or 0–20 mA analog outputs |
| Relays | Four SPDT relays |
| Enclosure Rating | NEMA 4X (IP65) |
| Mounting Options | Panel, surface, and pipe mounting |
| Sensor Weight | 1.6 kg |
| Sensor Cable Length | 3.05 m (10 ft) |
| Instrument Weight | 0.5 kg |
| Flow Units | L/s, m³/s, gal/min, ft³/s, ML/d, Mgal/d |
| Depth Units | mm, m, in, ft |
| Brand | HACH |
|---|---|
| Model | UVASsc |
| Measurement Principle | UV Absorption at 254 nm |
| Optical Path Length Options | 1 mm, 2 mm, 5 mm, 50 mm |
| Measuring Range Options | 0.01–60 m⁻¹, 0.1–600 m⁻¹, 0–1500 m⁻¹, 2–3000 m⁻¹ |
| Measurement Cycle | 1 minute |
| Response Time | >1 min (adjustable) |
| Turbidity Compensation | Dual-beam optical system |
| Analog Outputs | Two isolated 0/4–20 mA outputs (max. load 500 Ω) |
| Communication Protocols | MODBUS RTU or PROFIBUS DP (configurable) |
| Enclosure Rating | IP65 |
| Operating Temperature | +2 °C to +40 °C |
| Probe Pressure Rating | Max. 0.5 bar (suitable for submersion up to 2 m depth) |
| Power Supply | 230 VAC ±10%, 50 Hz, 15 VA OR 24 VDC/AC ±25%, 800 mA |
| Probe Dimensions | Ø70 × 333 mm |
| Probe Weight | ~3.6 kg |
| Installation Options | Immersion or flow-through cell |
| Self-cleaning Mechanism | Mechanical wiper integrated |
| Brand | HACH |
|---|---|
| Origin | Imported |
| Manufacturer Type | Manufacturer |
| Model | WDMP sc |
| Price | Upon Request |
| TOC Range | 0–25 mg/L (Enhanced) |
| pH Range | 0–14 |
| Conductivity Range | 0–2000 µS/cm |
| Turbidity Range | 0.01–100 NTU |
| Free/Total Chlorine Range | 0–5 mg/L |
| Pressure Range | 0–150 PSI |
| Temperature Range (Ambient) | −20–200 °C |
| Controller | sc1000 |
| Sensor Interface | Digital, RS485 |
| Max Sensor-to-Controller Distance | 1000 m |
| Enclosure Rating | NEMA 4X (Optional) |
| Mounting | Wall or Pole Mount |
| Sample Inlet | 1/2" OD tubing or 3/8" NPT |
| Sample Outlet | 3/4" NPT or flexible hose |
| Sampler Interface | 1/4" NPT |
| Weight | 29.5 kg |
| Dimensions | 56 cm × 131 cm |
| Sample Temp. | 5–40 °C |
| Sample Pressure | 20–125 psi (pressure regulator optional, P/N 6846600 for >125 psi) |
| Sample Flow Rate | 400–600 mL/min |
| Power | 115/230 VAC, 50 Hz |
| Max Power Consumption | 90 VA (CL17 module), ≤30 VA (other modules) |
| Display | sc1000 controller with integrated LCD |
| Communication Protocol | MODBUS over RS485 |
| Event Trigger Capability | Yes (supports external analyzers, auto-samplers, TOC, ORP) |
| Brand | Horde Electric |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | HD-101 |
| Measurement Principle | Potassium Dichromate Oxidation–Spectrophotometric Method |
| Measurement Range | (15–1000) mg/L, (50–3000) mg/L, (200–10000) mg/L (expandable) |
| Zero Drift | ±5 mg/L |
| Span Drift | ±5% F.S. |
| Accuracy | ±10.0% of reading |
| Limit of Quantitation | 15 mg/L |
| Repeatability | ≤5.0% RSD |
| Cycle Time | ≤60 min |
| Insulation Resistance | >20 MΩ |
| MTBF | ≥720 h |
| Communication Interfaces | RS232 / RS485, 4–20 mA analog output |
| Dimensions (L×W×H) | 500 × 440 × 1440 mm |
| Weight | 55 kg |
| Display | 7-inch capacitive touchscreen |
| Controller | Industrial PLC-based embedded system |
| Operating Temperature | 5–40 °C |
| Operating Humidity | 20–85% RH (non-condensing) |
| Power Supply | AC 220 V ±25%, 50 Hz ±0.5 Hz |
| Rated Power Consumption | 100 W |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HD-200 |
| Protection Rating | IP65 |
| Measurement Principle | Clark-type Polarographic Membrane Sensor |
| DO Range | 0–20 mg/L (Resolution: 0.01 mg/L) |
| Saturation Range | 0–200% (Resolution: 1%) |
| Temperature Range | 0–50 °C (Resolution: 0.1 °C) |
| Repeatability | ±0.5% FS (DO), ±0.5 °C (Temp) |
| Linearity | ±0.5% FS (DO), ±0.5 °C (Temp) |
| Output | Three isolated 4–20 mA analog channels (max load: 900 Ω), three SPDT relay outputs, one dry-contact input, RS-485 Modbus RTU interface |
| Power Supply | 90–264 V AC, 50/60 Hz, ≤15 VA |
| Operating Ambient | −20 to +55 °C |
| Enclosure Material | Anodized Aluminum |
| Weight | ~4.5 kg |
| Compliant | CE, FCC, RoHS, WEEE |
| Compatible Probes | DO-1100 (integrated Pt1000 temperature sensor), Electrodes: 5505, 5510 |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HD-300 |
| Measurement Principle | Clark-type Polarographic Membrane Sensor |
| DO Range | 0–20 mg/L (resolution: 0.01 mg/L) |
| Saturation Range | 0–200% (resolution: 1%) |
| Temperature Range | 0–50 °C (resolution: 0.1 °C) |
| Repeatability | ±0.5% FS (DO), ±0.5 °C (temperature) |
| Linearity | ±0.5% FS (DO), ±0.5 °C (temperature) |
| Output | Isolated 4–20 mA DC (max. load: 600 Ω) |
| Digital Interface | RS-485 (2-wire, input/output isolated) |
| Power Supply | 24 V DC (21–32 V DC operating range), max. 0.6 W |
| Enclosure Rating | IP65 |
| Ambient Operating Temperature | −20 to +60 °C |
| Housing Material | Aluminum alloy |
| Mounting | Wall or 50A pipe column |
| Compatible Probes | DO-1100 (integrated Pt1000 temperature sensor) |
| Compliant Standards | CE, FCC, RoHS, WEEE |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HD-480 |
| Measurement Principle | Galvanic Cell (Electrochemical) |
| DO Range | 0–20 mg/L (resolution: 0.01 mg/L) |
| Saturation Range | 0–200% (resolution: 1%) |
| Temperature Range | 0–40 °C (resolution: 0.1 °C) |
| Repeatability | ±0.5% FS (max) |
| Linearity | ±0.5% FS (max) |
| Output | Isolated 4–20 mA DC (max load: 900 Ω) |
| Relay Outputs | 2 × SPDT (240 V AC / 30 V DC, 3 A) |
| Calibration Options | Air saturation, saturated aqueous solution, salinity (0.0–5.0%), dual-point temperature compensation |
| Sensor Compatibility | DP-1100 probe with built-in Pt1000 thermistor |
| Power Supply | 90–264 V AC, 50/60 Hz |
| Max Power Consumption | 10 W |
| Operating Ambient | −5 to +45 °C |
| Compliance | CE, FCC, RoHS |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-200C |
| Enclosure Rating | IP65 |
| Power Supply | 90–264 V AC, 50/60 Hz |
| Output | Three isolated 4–20 mA analog outputs (configurable per parameter) |
| Relay Outputs | Three SPDT dry-contact relays (R1–R3, user-assignable for high/low alarms, USP qualification, or fault indication) |
| Communication | RS-485 (2-wire, galvanically isolated input/output circuitry) |
| Temperature Compensation | Pt1000 sensor (0 °C reference), 0–100 °C range |
| Measurement Parameters | Conductivity (0.000 µS/cm to 200.0 mS/cm, selectable cell constant: 0.01, 0.1, or 1.0 cm⁻¹), TDS (0.00–2000 mg/L, user-defined conversion factor 0.30–1.00), and temperature (0–100 °C, ±0.1 °C accuracy at reference point) |
| Accuracy | Conductivity ±0.5% FS (max), TDS ±1.5% FS (max), temperature ±0.5 °C linearity error |
| Repeatability | Conductivity ±0.5% FS (max), TDS ±1.5% FS (max) |
| Environmental Rating | Outdoor-rated aluminum housing, CE/FCC/WEEE/RoHS compliant |
| Mounting | Pole-mounted (50A pipe) or wall-mounted |
| Weight | ~4.5 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-200H |
| Measurement Principle | Four-Electrode Conductivity |
| Range | 0.0–200.0 mS/cm (auto-ranging, dual-scale: 0.00–20.00 mS/cm & 0.0–200.0 mS/cm) |
| Temperature Compensation | 0–100 °C (Pt1000 sensor) |
| Accuracy | ±0.5% FS (0–20.00 mS/cm), ±1.0% FS (20.0–200.0 mS/cm) |
| Repeatability | ±0.1 °C (temperature), linearity ±0.5 °C |
| Enclosure Rating | IP65 |
| Compliance | CE, FCC, RoHS, WEEE |
| Output | Three isolated 4–20 mA analog outputs (max load 900 Ω), three SPDT relay contacts (R1/R2/failure), RS-485 Modbus RTU interface |
| Power Supply | 90–264 V AC, 50/60 Hz, ≤15 W |
| Operating Ambient | −20 to +55 °C |
| Weight | ~4.5 kg |
| Housing Material | Anodized aluminum alloy |
| Mounting | Pole-mounted (50A pipe) or wall-mountable |
| Electrode Constant Options | 0.1 cm⁻¹ or 1.0 cm⁻¹ |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-200R |
| Measurement Principle | Two-Electrode Conductivity Method (Inverse Calculation for Resistivity) |
| Resistivity Range | 0.000–2.000 MΩ·cm (with K=0.01/cm electrode), 0.00–20.00 kΩ·cm, 0.0–200.0 kΩ·cm |
| Temperature Range | 0–100 °C |
| Temperature Compensation | Pt1000 sensor (0 °C reference), 0–100 °C range |
| Accuracy (Resistivity) | ±0.01 MΩ·cm max (at reference temperature, standard units) |
| Accuracy (Temperature) | ±0.02 °C max |
| Repeatability (Resistivity) | ±0.1% FS |
| Linearity (Resistivity) | ±0.5% FS |
| Output | Isolated 4–20 mA (2 points), SPDT relay outputs (3 points), dry-contact input (1 point) |
| Communication | RS-485 (2-wire, input/output isolated) |
| Enclosure Rating | IP65 |
| Compliance | CE, FCC, RoHS, WEEE |
| Power Supply | 90–264 V AC, 50/60 Hz, ≤15 VA |
| Operating Ambient | −20 to +55 °C |
| Weight | ~4.5 kg |
| Sensor Compatibility | ERF-series resistivity sensors (K=0.01 cm⁻¹) |
| Calibration | Electrode constant entry, single-point temperature calibration, atmospheric or saturated solution reference modes |
| Special Functions | Ultrapure water resistivity mode, trim adjustment, real-time self-diagnosis (electrode fault, analyzer error) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-300R |
| Enclosure Rating | IP65 |
| Measurement Principle | Two-Electrode Conductivity Method (Inverse Calculation for Resistivity) |
| Resistivity Range | 0.000–2.000 MΩ·cm (with 0.01 cm⁻¹ electrode), 0.00–20.00 kΩ·cm (with 0.1 cm⁻¹ electrode), 0.0–200.0 kΩ·cm (with 1.0 cm⁻¹ electrode) |
| Temperature Range | 0–100 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Accuracy | ±0.02 °C (at reference point, Pt1000 sensor) |
| Resistivity Accuracy | ±0.01 MΩ·cm (max, calibrated per electrode constant) |
| Repeatability | ±0.1% (resistivity), ±0.1 °C (temperature) |
| Linearity | ±0.5% (resistivity), ±0.5 °C (temperature) |
| Output | Isolated 4–20 mA DC (max load 600 Ω) |
| Digital Interface | RS-485 (2-wire, galvanically isolated I/O) |
| Power Supply | 24 V DC (21–32 V DC operating range), ≤0.6 W |
| Operating Ambient | −20 to +60 °C |
| Housing Material | Anodized Aluminum |
| Mounting | Pole-mount (50A pipe) or wall-mount |
| Sensor Compatibility | HORIBA ERF-series resistivity sensors (e.g., ERF-001, electrode constant 0.01 cm⁻¹) |
| Compliance | CE, FCC, RoHS, WEEE |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-480C |
| Enclosure | Aluminum, IP65-rated |
| Compliance | CE, FCC, RoHS, WEEE |
| Input Channels | 1-channel conductivity sensor interface |
| Electrode Constants Supported | 0.01 cm⁻¹, 0.1 cm⁻¹, 1.0 cm⁻¹ |
| Conductivity Range (selectable per electrode constant) | 2.000–20.00 µS/cm (0.01 cm⁻¹), 20.00–200.0 µS/cm (0.1 cm⁻¹), 200.0–2000 µS/cm / 0.2000–2.000 mS/cm / 2.000–20.00 mS/cm / 20.00–200.0 mS/cm (1.0 cm⁻¹) |
| TDS Range | 2.00–20.0 mg/L, 20.0–200 mg/L, 200–2000 mg/L (user-defined conversion factor 0.30–1.00) |
| Temperature Range | 0–100 °C (adjustable decimal places: 0/1/2) |
| Repeatability | ±0.5% of full scale (conductivity), ±1.5% FS (TDS) |
| Analog Output | 4–20 mA DC, isolated, max. load 900 Ω |
| Relay Outputs | 2 × SPDT (240 V AC / 30 V DC, 3 A resistive) |
| Temp. Compensation Options | Ultra-pure water mode (ref. 25 °C), user-defined reference temp. (5–95 °C) & temp. coefficient (±5 %/°C), NaCl curve, or none |
| Sensor Compatibility | HORIBA ESH-series and FS-series conductivity sensors |
| Power Supply | 90–264 V AC, 50/60 Hz, ≤10 VA |
| Operating Ambient | −5 to +45 °C |
| Weight | ~4.5 kg |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-480H |
| Measurement Principle | Four-Electrode Conductivity |
| Enclosure Rating | IP65 |
| Compliance | CE, FCC, RoHS, WEEE |
| Input | Single-Channel FES-Series Electrode (Cell Constant: 1.0 cm⁻¹) |
| Conductivity Range | 0.00–20.00 mS/cm |
| Temperature Range | 0–100 °C |
| Temp. Compensation | Adjustable Reference Temp (5–95 °C) & Temp. Coefficient (±5 %/°C) |
| Output | 4–20 mA (Isolated, Max Load 900 Ω) |
| Relay Outputs | 2 × SPDT (240 V AC / 30 V DC, 3 A) |
| Repeatability | ±0.5 % FS (±1.0 % at 500 mS/cm or salinity mode) |
| Salinity Conversion | 0.00–4.00 % NaCl / 0.0–20.0 % Salt |
| Operating Ambient | −5 to +45 °C |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Model | HE-480R |
| Sensor Input | Single-channel (electrode constant: 0.01 cm⁻¹) |
| Resistivity Range | 0–0.200 / 0–2.00 / 0–20.0 / 0–100.0 MΩ·cm |
| Alternate Range | 0–2.00 / 0–20.0 / 0–200.0 / 0–1000 kΩ·cm |
| Temperature Range | 0–100 °C (configurable 1- or 2-digit display) |
| Repeatability | ±0.5% (max, equivalent input) |
| Linearity | ±0.5% (max, equivalent input) |
| Output | 1 × isolated 4–20 mA DC (max load 900 Ω) |
| Relay Outputs | 2 × SPDT (240 V AC / 30 V DC, 3 A resistive) |
| Digital Interface | RS-485 (2-wire, input/output isolated) |
| Temp. Compensation | Pt1000 sensor |
| Enclosure Rating | IP65 (outdoor-rated) |
| Compliance | CE, FCC, RoHS, WEEE |
| Compatible Sensors | HORIBA ERF-series resistivity sensors (0.01 cm⁻¹) |