Optical Instruments
Filter
Showing 4981–5010 of 7826 results
| Brand | Neaspec |
|---|---|
| Origin | Germany |
| Model | THz-NeaSNOM |
| Spatial Resolution | <30 nm |
| THz Frequency Range | 0.1–3 THz |
| Compatible Light Source | Femtosecond Laser for THz-TDS |
| AFM Probe Compatibility | Commercial tapping-mode AFM probes |
| Optical Collection | Broadband Parabolic Mirror Optics |
| Application Domain | Nanoscale Semiconductor Metrology, Ultrafast Carrier Dynamics, 2D Material Characterization |
| Origin | Czech Republic |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | LiteScope |
| Price Range | USD 65,000–130,000 |
| Instrument Type | Atomic Force Microscope |
| Positional Detection Noise | AFM-in-SEM Integration |
| Sample Dimensions | In-situ AFM-compatible |
| Stage Travel Range | 100 × 100 × 100 µm |
| Brand | NeTHIS |
|---|---|
| Origin | France |
| Model | TeraCam |
| Spectral Range | 0.1–3000 µm |
| Sensitive Field | 70 × 70 mm |
| Pixel Size | 100 µm |
| Number of Pixels | 700 × 700 |
| Minimum Resolution | 0.1 mm |
| Minimum Detectable Power Density | 1 µW/cm² |
| Damage Threshold | 1 W/cm² |
| Interface | IEEE 1394 (FireWire) and Gigabit Ethernet |
| Dimensions | 200 × 200 × 300 mm |
| Core Technology | Broadband Terahertz Photoconductive Imaging |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | APTAC 264 |
| Category | Adiabatic Reaction Calorimetry System |
| Operating Principle | Heat Flow Compensation with Real-Time Pressure-Tracking Adiabatic Control |
| Temperature Range | Up to 500 °C (dependent on cell configuration) |
| Pressure Range | Up to 200 bar (standard cell), optional high-pressure variants available |
| Sample Volume | 0.5–20 mL (adjustable via interchangeable reaction cells) |
| Data Acquisition Rate | ≥10 Hz for temperature and pressure |
| Compliance | ASTM E1981, DIERS Guidelines, ISO/IEC 17025-aligned operation protocols |
| Software | Proteus® Thermal Analysis Suite with DIERS-compliant vent sizing module |
| Regulatory Support | FDA 21 CFR Part 11 audit trail, GLP/GMP documentation templates |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | ARC 254 |
| Measurement Principle | Heat Flow Compensation Adiabatic Calorimetry |
| Temperature Tracking Rate | Up to 200 K/min |
| Dual-Sensor Monitoring | Simultaneous Temperature & Pressure |
| Safety Architecture | Independent Hardware-Based Safety Interlocks |
| Software Platform | Proteus® Thermal Analysis Suite |
| Compliance Ready | ASTM E698, ISO 8237, UN Test Series H.1–H.4, IEC 61508 (SIL2), GLP/GMP Audit Trail Capable |
| Sample Volume | 0.1–10 mL (sealed high-pressure crucibles) |
| Operating Mode | Adiabatic, Isothermal, Dynamic Ramp, Phi-Factor Compensated |
| Data Output | Time-resolved T(t), p(t), dT/dt, dp/dt, (dT/dt)ₘₐₓ, Onset T, TMRad, ΔHᵣₓₙ, Activation Energy (Eₐ) via ASTM E698/E2070) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | MMC 274 Nexus |
| Temperature Range | Up to 500 °C |
| Pressure Range | Up to 100 bar (10 MPa) |
| Modular Design | ARC, Scanning, and Button Cell Modules |
| Software | Proteus® Thermal Analysis Suite |
| Compliance | ASTM E1981, ISO 22513, IEC 60079-10-1 (for hazardous area applications), GLP/GMP-ready data audit trail |
| Origin | France |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Laue CCD Camera |
| Price Range | USD 14,000 – 70,000 |
| Brand | LQ Tech |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | NEVE |
| Pricing | Available Upon Request |
| Spectral Range | 200–1100 nm |
| Optical Architecture | Symmetric Czerny-Turner |
| F-number | f/7.5 |
| Slit Width Options | 10, 25, 50, 75, or 100 µm |
| Grating Options | 300, 600, 900, 1200, or 1800 lines/mm |
| Stray Light | <1% |
| Weight | 400 g |
| Interface | USB 2.0 Type-B, Digital I/O |
| Fiber Optic Connector | Standard SMA 905 (customizable) |
| Brand | New Focus |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 9743-M |
| Component Category | Optical Mounting Hardware |
| Rail Compatibility | 9731 & 9732 Series |
| Length | 25.4 mm |
| Width | 66.0 mm |
| Height | 28.7 mm |
| Mounting Thread | M4 |
| Counterbored Holes | Two M4 |
| Tapped Holes | Two M4 |
| Rail Width Family | 3.0 in (76.2 mm) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Model | 473-10-100 |
| Wavelength | 473 nm |
| Pulse Energy | 10 µJ |
| Pulse Width | 2.5 ns |
| Repetition Rate | 100 Hz |
| Spectral Bandwidth | 0.2 nm |
| Output Type | Q-switched, TEM₀₀ |
| Cooling | Air-cooled |
| Beam Diameter (1/e²) | ~0.8 mm |
| Beam Divergence (full angle) | <1.5 mrad |
| Polarization | Linear, >100:1 |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Compliance | CE, RoHS, FDA 21 CFR Part 1040.10 (Laser Product Safety) |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Type | Optical Instrument Component |
| Model | Auto-Balanced Detector |
| Wavelength Range | 400–1070 nm / 800–1700 nm / 900–1650 nm |
| Common-Mode Rejection Ratio (CMRR) | ≥50 dB (typ.), >21 dB @ 300 MHz (Model 1837) |
| Bandwidth (–3 dB) | 125 kHz / 125 kHz / 1 GHz (12 dB compression, Model 1837) |
| Rise Time | 3 µs / 3 µs / <1 ns |
| Max Conversion Gain | 5.2×10⁵ V/W / 1×10⁶ V/W / >30,000 V/W |
| Peak Responsivity | 0.5 A/W / 1 A/W / 0.75 A/W |
| Max Transimpedance Gain | 1×10⁶ V/A / 1×10⁶ V/A / >40,000 V/A |
| Output Impedance | 100 Ω / 100 Ω / 50 Ω |
| NEP | 3 pW/√Hz / 3 pW/√Hz / 15 pW/√Hz |
| Saturation Power (CW) | 1 mW / 0.5 mW / 1 mW (per input) |
| Detector Active Diameter | 2.5 mm / 1 mm / N.A. |
| Optical Input | FC & free-space / FC & free-space / FC/APC, single-mode |
| Output Connector | Male BNC / Male BNC / SMB |
| Power Supply | ±15 V, <300 mA / ±15 V, <300 mA / ±15 V, 200 mA |
| Brand | NewOpto |
|---|---|
| Model | DPSSL-473 / DPSSL-532 / DPSSL-671 / DPSSL-1064 |
| Wavelength | 473 nm, 532 nm, 671 nm, 1064 nm |
| Output Power | 5–3000 mW (model-dependent) |
| Spatial Mode | TEM₀₀, M² < 1.2 (standard), < 2.0 (high-power variants) |
| Linewidth | < 0.1 nm |
| Polarization Ratio | 100:1, linear |
| Beam Diameter (1/e²) | 1.5–3.0 mm |
| Beam Divergence | 0.5–2.0 mrad |
| Power Stability | ±3% to ±5% over 2–4 hrs |
| Warm-up Time | < 1–5 min |
| Operating Temperature | 20–30 °C |
| Storage Temperature | 10–50 °C |
| Lifetime | ≥10,000 hours |
| Operation Mode | CW or analog/digital modulation |
| Brand | NewOpto |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | First Sensor Series 8/9/10/11/12 |
| Component Type | Semiconductor Photodetector |
| Spectral Range | 360–1100 nm |
| Packaging | TO-5, TO-52, TO-5i, TO-8, LCC6.1, SOJ22GL, BGA, DIL18 |
| Active Area | Ø0.1–Ø5.0 mm (0.008–19.63 mm²) |
| Gain (M) | Up to 100 |
| Dark Current | 0.05–60 nA (dependent on series and bias) |
| Rise Time | <0.18–3 ns |
| Bandwidth | Up to 3 GHz (Series 12) |
| Compliance | RoHS, REACH, ISO 9001-certified supply chain |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IRviewer1700 |
| Spectral Sensitivity Range | 350–1700 nm (extended to 2000 nm with optional filter configuration) |
| Peak Sensitivity | ~800 nm |
| Focal Range | 0.1 m to infinity |
| Resolution | 60 line pairs per millimeter (lp/mm) |
| Field of View | 40° (with standard Infragon 25 mm f/1.0 lens) |
| Magnification | Approx. 1:1 |
| Lens Mount | C-mount compatible (standard 25 mm Infragon f/1.0 lens included |
| Illumination | Integrated 900 nm LED illuminator |
| Compliance | Designed for alignment and visualization in laser safety-compliant workflows (IEC 60825-1 Class 1/Class 1M environments when used with appropriate attenuation) |
| Brand | NewOpto |
|---|---|
| Model | LDM-405 / LDM-445 / LDM-635/638 / LDM-650 |
| Wavelength | 405±5 nm, 445±5 nm, 635±5 nm / 638±5 nm, 650±5 nm |
| Spatial Mode | Near TEM₀₀ (405/445 nm), Multimode (635/638/650 nm) |
| Output Power | 10–200 mW (405 nm), 100–1000 mW (445 nm), 200–800 mW (635/638 nm), 250–900 mW (650 nm) |
| Operation Mode | CW or Analog/Modulated |
| Beam Diameter (1/e²) | 4.0 mm (405/635/638 nm), 2×4 mm (445 nm), 5.0 mm (650 nm) |
| Beam Divergence | ≤0.5 mrad (405 nm), <3×0.5 mrad (445 nm), ≤2 mrad (635/638 nm), 1.5 or 3 mrad (650 nm) |
| Power Stability | <3% over 4 hrs (405/445 nm), <3% over 2 hrs (635/638/650 nm) |
| Warm-up Time | <2 min |
| Operating Temperature | 20–30 °C |
| Storage Temperature | 10–50 °C |
| Lifetime | 10,000 hrs (405/445 nm), 5,000 hrs (635/638/650 nm) |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | LLS-LEDs |
| Light Source Type | Solid-State LED |
| Illumination Mode | External Illumination |
| Connector Type | SMA 905 |
| Wavelength Range | 240 nm – 2100 nm |
| Spectral Options | UV, Visible, NIR, Broadband White (3000K–6500K CCT) |
| Coupling | FC/PC or SMA fiber-coupled output |
| Compliance | RoHS-compliant construction, CE-marked for laboratory use |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NewOpto LS-1 / LS-2 |
| Price | Available Upon Request |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Model | LSD-UV |
| Optical Density (OD) | ≥6 @ 100–400 nm |
| Visible Light Transmittance (VLT) | 90% |
| Spectral Protection Range | 100–10,600 nm |
| Compliance | EN 207:2023, ANSI Z136.1-2022, CE Marked |
| Regulatory Classification | Class 1 Laser Protective Equipment |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | NewOpto Lasers |
| Core Technology | Monolithic Nd:YAG/Nd:YVO₄-based Passive Q-Switching |
| Key Specifications | Single Longitudinal Mode (SLM), Polarization Ratio >100:1, Spectral Linewidth ≤0.2 nm (FWHM), Repetition Rates from Single-Shot to 100 kHz, Pulse Widths from 350 ps to 2.5 ns, Output Wavelengths at 266, 355, 473, 532, 946, and 1064 nm |
| Package Options | SP (Standard Package), FP2 (Fiber-Pigtailed Compact Module), TO3 (TO-Can Style), ILM (Integrated Laboratory Module with Controller, Power Supply & Housing) |
| Dimensions | SP: 167.1×88.9×73.9 mm |
| FP2 | 50.5×34.0×25.5 mm |
| TO3 | 39.2×26.0×33.8 mm |
| ILM | 1315.0×114.3×86.4 mm |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | newopto |
| Central Wavelengths | 1.0 μm, 1.3 μm, 1.5 μm, 1.6 μm |
| Output | Polarization-Maintaining (PM) Fiber |
| Output Power | 10–1000 mW |
| Linewidth | 1–1000 kHz |
| Tuning Range | 0–3 nm |
| Wavelength Stability | ±1 pm |
| Power Stability | ≤1% (RMS, 8 hrs) |
| Frequency Modulation Bandwidth | <0.1 GHz (amplitude), 10 Hz–100 kHz (repetition rate) |
| Frequency Noise | <300–500 Hz/√Hz @ 1 Hz |
| Intensity Noise | <−130 dB/Hz @ 1 Hz |
| Operating Temperature | 0–50 °C |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Power Consumption | <2 W (per channel) |
| Dimensions | 326 × 161 × 78 mm³ |
| Weight | 1.5 kg |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Type | Gas Laser Source |
| Wavelength | 633 nm |
| Output Power | 3.0 mW |
| Polarization | Linear (POL) |
| Beam Mode | TEM₀₀ |
| Operating Voltage | 230 V AC |
| Cooling | Air-Cooled |
| Lifetime | ≥20,000 hours |
| Warm-up Time | <15 min |
| Beam Diameter | ~0.65 mm |
| Divergence | <1.5 mrad |
| Stability (Power) | ±1% over 8 hrs |
| Frequency Stability (for stabilized variants) | <±1 MHz |
| Compliance | CE, RoHS |
| Mounting | Standard Ø25.4 mm kinematic base compatible |
| Brand | NewOpto |
|---|---|
| Model | OEM Lasers |
| Type | Semiconductor Laser Source for Integration |
| Origin | Zhejiang, China |
| Wavelength Range | 405–1342 nm |
| Output Power | 10–500 mW (model-dependent) |
| Spectral Linewidth | <0.1 pm to <2 nm |
| Long-Term Power Stability | <1–2% (RMS, 8h) |
| Wavelength Accuracy | ±0.1 nm to ±3 nm |
| Operating Temperature | 15–35 °C |
| Cooling | Conductive / TEC-stabilized (depending on variant) |
| Modulation | Analog & TTL (optional) |
| Beam Diameter (1/e²) | 0.8–1.2 mm |
| M² | <1.3 |
| Polarization Ratio | >100:1 |
| Interface | SMA905 or FC/PC fiber coupling (customizable) |
| Compliance | RoHS, CE (Laser Class 3B/4 per IEC 60825-1) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NewOpto PIN Series |
| Pricing | Upon Request |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model Series | Polaronyx MERCURY, URANUS, PLUTO |
| Core Technology | Mode-locked Er/Yb-doped fiber oscillator + amplifier architecture |
| Wavelength Range | 480–2050 nm (fundamental + harmonic outputs) |
| Pulse Duration | <100 fs to <1000 fs (model-dependent) |
| Repetition Rate | 10 kHz – 100 MHz (fixed or tunable per platform) |
| Average Power | >20 mW to >5 W |
| Pulse Energy | >10 nJ to >50 µJ |
| Polarization | Polarized (PM-fiber-coupled) or unpolarized options available |
| Harmonic Generation | Optional SHG (2ω), THG (3ω), FHG (4ω) modules for UV–visible extension |
| Compliance | CE, RoHS, FDA 21 CFR Part 11-ready software interface (via optional control suite) |
| Brand | First Sensor |
|---|---|
| Active Area Options | 3.5×1 mm² to 20×20 mm² |
| Spectral Response Peak | 865 nm |
| Operating Voltage | 10 V |
| Load Resistance | 50 Ω |
| Rise Time | 200 ns to 4000 ns |
| Package Types | SO8, SMD, SO16, CERpin, CERsmd, LCC10G |
| Axis Configuration | Single-axis and Dual-axis variants |
| Material | Silicon-based PIN photodiode architecture |
| Brand | NewOpto |
|---|---|
| Model | QP45-Q |
| Active Area | 6.7 × 6.7 mm² |
| Quadrant Configuration | Four electrically isolated, radially symmetric photodiode segments separated by a narrow gap (≤20 µm) |
| Spectral Range | Optimized for 1064 nm (high-responsivity InGaAs or Si-based epitaxial structure) |
| Reverse Bias | Up to 150 V |
| Dark Current | ≤3 nA per quadrant (at 150 V, 25°C) |
| Rise Time | ≤5 ns (50 Ω load) |
| Package | Hermetically sealed TO-8S metal can with quartz window |
| Operating Temperature | –10°C to +60°C |
| Compliance | RoHS-compliant, ISO 9001-manufactured components |
| Brand | NewOpto |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Quantas Q1-1053 / Q2-1053 |
| Light Source Type | Infrared Pulsed Solid-State Laser |
| Illumination Mode | External Illumination |
| Wavelength | 1053 nm (1047 nm optional) |
| Fundamental Output Energy | 5–70 mJ |
| Harmonic Outputs | 527 nm (2–35 mJ), 351 nm (1–20 mJ), 263 nm (0.6–11 mJ), 211 nm (0.15–3.5 mJ) |
| Repetition Rate | 10 Hz (factory-fixed) |
| Pulse Width | < 8 ns |
| Pulse-to-Pulse Energy Stability | < 1 % rms (Q1), < 0.7 % rms (Q2) |
| Power Drift | ±3% |
| Beam Profile | Near TEM₀₀, >75% Gaussian |
| Beam Divergence | < 3 mrad (Q1A) to < 1.5 mrad (Q1C/Q1D) |
| Beam Diameter | 1.2–3.0 mm |
| Polarization | Linear, horizontal |
| Optical Jitter | < 1 ns rms |
| Laser Head Dimensions | 113 × 230 × 112 mm (Q1), 113 × 400 × 112 mm (Q2-1053) |
| Harmonic Generator | 113 × 242 × 112 mm |
| Controller Unit | 85 × 165 × 50 mm |
| Power Adapter | 50 × 125 × 32 mm |
| Operating Environment | 15–30°C, 10–80% RH (non-condensing), 90–230 VAC, 30 W, 47–63 Hz |
| Brand | First Sensor |
|---|---|
| Model | newopto |
| Type | Silicon PIN Photodiode-Based Ionizing Radiation Detector |
| Active Area Range | 0.5–100 mm² |
| Dark Current | 0.005–5 nA (typ.) |
| Gamma Energy Threshold | >1 keV (X0.5–γ to X10–γ) |
| Package Options | TO-8S, TO-39, LCC10, CerPin |
| Spectral Response | 0.1–20 keV (Si absorption edge-dependent) |
| Depletion Depth | Fully depleted, 300–500 µm |
| Operating Temperature | –20 °C to +50 °C |
| Bias Voltage | –5 V to –100 V (reverse bias, model-dependent) |
| Brand | NewOpto |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SF-LASER Series |
| Core Technology | Diode-Pumped Solid-State (DPSS) Single-Longitudinal-Mode Laser |
| Wavelength Range | 266 nm – 1064 nm |
| Output Power Range | 6 mW – 3000 mW (wavelength-dependent) |
| Spectral Linewidth | < 0.15 nm (for visible/NIR diode-pumped microchip lasers) to < 0.5 MHz (for stabilized DPSS lasers) |
| Power Stability | ≤ 0.5% RMS (for microchip variants), ≤ 2% RMS (for high-power DPSS configurations) |
| Operating Mode | Continuous Wave (CW) |
| Cooling | Conductive and/or Thermoelectric (TEC) |
| Beam Quality | TEM₀₀, M² < 1.1 |
| Polarization | Linear, >100:1 extinction ratio |
| Brand | NewOpto |
|---|---|
| Model | SL-01 / SL-02 |
| Wavelength | 633 nm |
| Output Power | >1.2 mW (SL-01), >2.4 mW (SL-02) |
| Polarization Ratio | >800:1 |
| Spatial Mode | TEM₀₀ |
| Beam Diameter | 0.63 mm |
| Beam Divergence | 1.3 mrad |
| Warm-up Time | <10 min |
| Frequency Stability (1 min) | ±2×10⁻⁹ (freq. stabilized mode) |
| Frequency Stability (1 hr) | ±5×10⁻⁹ |
| Frequency Stability (8 hr) | ±1×10⁻⁸ |
| Intensity Stability (1 min) | ±0.1% (intensity stabilized mode) |
| Intensity Stability (1 hr) | ±0.2% |
| Thermal Frequency Drift | <2 MHz/°C |
| Linewidth | <1 MHz (typical, single longitudinal mode) |