Other Industry Specialized Instruments
Filter
Showing 151–180 of 894 results
| [Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TAHS-20A Plus |
| Sample Positions | 20 |
| Sample Vial Capacity | 10 mL or 20 mL (customizable up to 100 mL) |
| Quantitative Loop Volume | 1 mL (optional: 0.5 / 2 / 5 mL) |
| Sample Heating Range | 40–220 °C (extendable to 300 °C) |
| Valve & Transfer Line Heating Range | 40–220 °C (extendable to 300 °C) |
| Temperature Accuracy | ±0.5 °C |
| Temperature Stability | < ±0.5 °C |
| Pressure Control Range | 0–0.25 MPa (continuously adjustable) |
| Pressurization Time | 0–999 s |
| Sampling Time | 0–30 min |
| Injection Time | 0–999 s |
| Bake-out/Flush Time | 0–30 min |
| Time Resolution | 1 ms |
| RSD | < 1.0% (for 100 ppm ethanol in water) |
| Purge Flow Rate | 0–100 mL/min (adjustable) |
| Communication Interface | USB |
| Automation Mode | Motor-driven actuation (no external gas required) |
| Compliance | ASTM D6866, ISO 11843-2, USP <467>, FDA 21 CFR Part 11 (with optional audit trail software)] |
| Brand | Beifen Sanpu |
|---|---|
| Model | TDS-III |
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Pricing | Upon Request |
| Brand | Beifen Sanpu |
|---|---|
| Model | UAHS-20A Plus |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Sample Positions | 20 |
| Heating Range (Sample/Valve/Transfer Line) | 40–220 °C (optional to 300 °C) |
| Temperature Accuracy | ±0.5 °C |
| Temperature Stability | < ±0.5 °C |
| Pressure Control Range | 0–0.25 MPa (continuously adjustable) |
| Sampling Time | 0–30 min |
| Injection Time | 0–999 s |
| Pressurization Time | 0–999 s |
| Purge/Clean Time | 0–30 min |
| Minimum Time Resolution | 1 ms |
| Quantitative Loop Volume | 1 mL (customizable: 0.5/2/5 mL) |
| Vial Capacity | 10 mL or 20 mL (customizable: 50/100 mL) |
| Simultaneous Heating | 1 or 2 vials |
| RSD (Ethanol in Water, 100 ppm) | < 1.0% |
| Backflush Flow Rate | 0–100 mL/min (adjustable) |
| Communication Interface | USB |
| Compliance | ASTM D6866, ISO 17025-compatible operation |
| [Brand | Beifen Sanpu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Manufacture | China |
| Model | VAHS-20A Plus |
| Sample Positions | 20 |
| Sample Vial Capacity | 10 mL or 20 mL (customizable up to 100 mL) |
| Quantitative Loop Volume | 1 mL (optional: 0.5 / 2 / 5 mL) |
| Sample Heating Range | 40–220 °C (extendable to 300 °C) |
| Valve & Transfer Line Heating Range | 40–220 °C (extendable to 300 °C) |
| Temperature Accuracy | ±0.5 °C |
| Temperature Stability | < ±0.5 °C |
| Pressure Control Range | 0–0.25 MPa (continuously adjustable) |
| Pressurization Time | 0–999 s |
| Sampling Time | 0–30 min |
| Injection Time | 0–999 s |
| Bake-out/Flush Time | 0–30 min |
| Minimum Time Resolution | 1 ms |
| Carrier Gas Flow Control | EPC-compatible (optional) |
| RSD | < 1.0% (measured on 100 ppm ethanol in water) |
| Backflush Flow Rate | 0–100 mL/min (adjustable) |
| Interface | USB 2.0 |
| Compliance | ASTM D6866, ISO 11843-2, USP <467>, EPA Method 502.2 / 524.2 / 8260D] |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | VDL-23 |
| Interior Volume | 23 L |
| Interior Dimensions (W/H/D) | 285 × 285 × 285 mm |
| Temperature Range | +5 °C to 200 °C |
| Temperature Accuracy | ≤ ±0.4 °C |
| Temperature Uniformity @100 °C | ±2.0 °C |
| Temperature Uniformity @200 °C | ±4.0 °C |
| Max. Vacuum Level | 1 × 10⁻² mbar |
| Vacuum Flange Port (DN) | 16 mm |
| Gas Inlet Port (PR) | 3/8″ |
| Compressed Air Connection | Ø8 mm, 50 L/min |
| IP Rating | IP54 (DIN EN 60529) |
| Power Supply | 230 V, ±10 %, 50/60 Hz |
| Rated Power | 800 W |
| Net Weight | 63 kg |
| Standard Shelves | 2 (up to 4 optional) |
| Shelf Load Capacity | 20 kg per shelf |
| Total Load Capacity | 35 kg |
| Shelf Spacing | 53 mm |
| Shelf Usable Area (W × D) | 234 × 280 mm |
| Heating Time to 100 °C | 66 min |
| Heating Time to 200 °C | 90 min |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | NJ-DBF-I / NJ-DBF-II |
| Heating Surface Material | Precision Cast Aluminum or High-Purity Graphite |
| Maximum Operating Temperature | 260 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Zone Dimensions | 600×400 mm, 400×300 mm, 450×350 mm (customizable) |
| Power Rating | 2 kW / 3 kW |
| Input Voltage/Frequency | 220 V / 50 Hz |
| Continuous Operation Time | Up to 48 h |
| Control Interface | Digital PID Controller with LED Display |
| Structural Design | Split Configuration (Heater Base + Remote Controller) |
| Corrosion Protection | Full PTFE (Teflon®) Coating on All Exposed Surfaces |
| Foot Design | PTFE-Coated Adjustable Feet |
| Cable Assembly | PFA-Insulated Signal & Power Cables (Standard 1.5 m |
| Connector Type | Aviation-Grade Sealed Connector |
| Optional Accessories | PTFE-Coated Multi-Well Sample Holder Kits (e.g., 2×200×300 mm for 600×400 mm Plate) |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Producer |
| Model | NJ-ZH-1 |
| Compliance | JJF 1175, HJ/T 299–2007, HJ/T 300–2007, HJ/T 557–2007 |
| Diameter | 200 mm |
| Mesh Range | 4–35 mesh (4.75 mm – 0.500 mm aperture) |
| Material | PTFE-coated stainless steel mesh with PTFE base and lid |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BIR-50 |
| Price Range | USD 105,000 – 140,000 (FOB Yokohama) |
| Illumination Mode | Pulsed Operation |
| Origin | Norway |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Blueye Pro |
| Pricing | Available Upon Request |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | Temp 150 |
| Max Operating Temperature | 150°C (±0.8°C) |
| Heating Power | 3 kW (expandable to 6 kW / 9 kW) |
| Oil Tank Capacity | 14 L (3 kW) / 19 L (6–9 kW) |
| Pump Pressure | 3.8–4.4 bar (up to 6.0 bar with TM8 pump) |
| Flow Rate | 60–80 L/min |
| Cooling Capacity | 23 kW (standard) / 35 kW (enhanced heat exchanger) |
| Control Interface | 4–20 mA analog input/output, MODBUS RTU, Profibus-DP V1, Ethernet/IP, PROFINET with IRT |
| Safety Certifications | CE (EN 60204-1:2018), ISO 9001:2015, optional ATEX Ex d IIB T4 |
| IP Rating | IP54 (standard control cabinet), IP65 (optional) |
| Noise Level | ≤60 dB(A) |
| Thermal Loss | <5% |
| Power Supply | 3-phase 400 V / 50 Hz or 480 V / 60 Hz (customizable) |
| Brand | ph-instruments |
|---|---|
| Origin | Denmark |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Industrial Equipment |
| Model | TEMP 300 |
| Heating Power Options | 6–36 kW (6/9/12/18/24/36 kW) |
| Max Operating Temperature | 300°C (±1°C PID control) |
| Thermal Fluid | Synthetic high-temp heat transfer oil (YD-400 series) |
| Protection Rating | IP54 (control cabinet) / IP65 (heating chamber) |
| Circulation Pump | P3/P4 high-pressure pump, max flow 66 L/min, max pressure 3.4–4.4 bar |
| Cooling System | I2/I4 heat exchanger, cooling capacity 36–72 kW at ΔT = 250°C |
| Process Interface | 1/2" BSP (hot side), Cooling Interface: 3/8" BSP (coolant side) |
| Power Supply | 3-phase 400 V, 50 Hz (optional 480 V, 60 Hz) |
| Dimensions (L×W×H) | ≤12 kW: 855×330×890 mm |
| ≤36 kW | 855×495×985 mm |
| Net Weight | 98 kg (12 kW), 165 kg (36 kW) |
| Certifications | CE (EN 60204-1:2018 & EN 60519-1:2015), ISO 9001:2015, optional ATEX |
| Key Features | Multi-layer thermal insulation (<3% heat loss), micro-positive pressure operation (<5 bar), industrial-grade noise reduction (≤58 dB), automatic oil level compensation, vacuum-run protection, programmable cooling, rapid mold drain, external PT100 input, runtime meter, 20 mA serial interface, 4–20 mA analog output, Profibus-DP, Ethernet/IP, Profinet, DeviceNet |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | TEMP 350 |
| Max. Operating Temperature | 350°C (±1.2°C PID control) |
| Heating Power Options | 9–36 kW |
| Thermal Fluid | YD-450 series synthetic heat transfer oil |
| Insulation Efficiency | <2.5% heat loss |
| System Pressure | Micro-positive pressure ≤4.5 bar |
| Noise Level | ≤55 dB(A) |
| Protection Rating | IP54 (control cabinet) / IP66 (heating chamber) |
| Pump Types | P3 (≤18 kW) / P4 (≤36 kW) |
| Max. Flow Rate | 66 L/min |
| Max. Discharge Pressure | 3.4 bar (P3) / 4.4 bar (P4) |
| Cooling Capacity at ΔT=250°C | 36 kW (I2) / 72 kW (I4) |
| Heat Exchange Area | 3.2 m² (I2) / 6.4 m² (I4) |
| Electrical Supply | 3-phase 400 V, 50 Hz (optional 480 V, 60 Hz) |
| Certifications | CE (EN 60204-1:2018, EN 60519-1:2015), ATEX II 2G Ex db IIC T4, PED 2014/68/EU, ISO 9001:2015 |
| Brand | BOE-THERM |
|---|---|
| Origin | Denmark |
| Model | Temp_160S_Touch |
| Max. Operating Temperature | 160°C (±0.5°C) |
| Heating Power | 4.5 kW (expandable to 9/13.5/18 kW) |
| Pump Type | Magnetically Driven Centrifugal Pump (Q9) |
| Max. Flow Rate | 90 L/min |
| Max. Pressure | 8.0 bar |
| Cooling Capacity (B4) | 81 kW |
| Heat Transfer Medium | Ultrapure Water (>15 MΩ·cm) |
| System Volume | 6 L (with expansion compensation) |
| Power Supply | 3-phase 400 V / 50 Hz or 460 V / 60 Hz |
| Dimensions (L×W×H) | 680 × 270 × 640 mm |
| Noise Level | ≤65 dB(A) at 1 m |
| Certifications | CE (2014/35/EU), UL (E492831), ISO 9001:2015 |
| Brand | Bonnot |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Equipment |
| Model | 6CE |
| Pricing | Available Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BP20DM |
| Pricing | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BQE-100C |
| Price Range | USD 14,000 – 70,000 (FOB) |
| Measurement Mode | DC |
| Wavelength Range | 300–1100 nm |
| Wavelength Purity | ≈20 nm |
| Illumination Area | 10 mm × 10 mm |
| Irradiance | >100 μW/cm² (at ~470 nm) |
| Detector | Calibrated Si Photodiode (Si-PD) |
| Light Source | 150 W Ozone-Free Xenon Arc Lamp |
| Software Functionality | Real-time spectral irradiance display, spectral response (SR) calculation, external quantum efficiency (EQE) derivation, Jsc integration (mA/cm²) |
| OS Compatibility | Windows 7 (64-bit) |
| Brand | Brugger |
|---|---|
| Origin | Japan |
| Manufacturer | KRK Co., Ltd. (Japan) |
| Model | KRK-2571-III |
| Press Plate Dimensions | 270 mm × 270 mm |
| Stroke | 195 mm |
| Pressing Pressure | 410 kPa |
| First-Stage Press Time | 5 min |
| Second-Stage Press Time | 2 min |
| Power Supply | 100/110 VAC, 50/60 Hz, 1 A |
| Compressed Air Requirement | 0.5 MPa |
| External Dimensions | 800 × 700 × 1700 mm |
| Weight | 400 kg |
| Construction Material | AISI 304 stainless steel |
| Compliance | CPPA C4/C5, TAPPI T205 |
| Operation | Pneumatic, dual-stage, fully automated |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BZS-II |
| Pricing | Upon Request |
| Input Voltage | AC 380 V / 50 Hz (3-phase + N) |
| Pump Pressure Range | 0.03–1.0 MPa |
| Power Consumption | 6 kW |
| Flow Rate Range | 0.05–6 m³/h |
| Test Stations | 3 (Water Hammer |
| Ambient Operating Temperature | Room Temperature (15–30 °C) |
| Brand | CA (France) |
|---|---|
| Origin | France |
| Model | CA8220 |
| Voltage Range | 6–600 V AC/DC (True RMS), ±(0.5% + 2 digits) |
| Current Range | 100 mA–6500 A AC (clamp-dependent), ±(0.5% + 1 digit) |
| Frequency Range | 40–70 Hz |
| THD Measurement | up to 50th harmonic (voltage & current), THD-F and THD-R |
| Motor Speed | 6–120,000 rpm, ±0.5% |
| Temperature (Pt100) | −200 °C to +850 °C, ±(1% + 10 digits) |
| Resistance | 0.0–2000 Ω, ±(0.5% + 2 Ω) |
| Display | 173-segment backlit LCD |
| Data Logging | Internal storage with time-stamped records |
| Connectivity | RS232 & USB |
| Safety Rating | IEC 61010-1, CAT III 600 V |
| Ingress Protection | IP54 |
| Dimensions | 211 × 108 × 60 mm |
| Weight | 840 g (with batteries) |
| Brand | Canfield |
|---|---|
| Origin | USA |
| Model | VISIA-CR 5 |
| Light Sources | Standard White, Cross-Polarized, Parallel-Polarized, UV-A, Blue-Filtered Absorption, Blue-Filtered Fluorescence, Raking Light |
| Core Technology | RBX (Red-Blue eXtended) Color Separation Algorithm |
| Imaging Modality | Multi-Spectral Digital Dermatological Imaging |
| Regulatory Status | FDA-cleared for dermatological imaging and cosmetic assessment |
| Compliance | Meets IEC 62304 (medical device software), ISO 13485 (quality management), and supports GLP-compliant data archiving |
| Brand | LUSTER |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | CartonHERO-650B |
| Pricing | Available Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CAST |
| Pricing | Available Upon Request |
| Key | Origin: Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | T |
| Pricing | Available Upon Request |
| Brand | EOTECH |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CBright |
| Pricing | Upon Request |
| Brand | Labsphere |
|---|---|
| Origin | USA |
| Model | CCS |
| Operating Mode | Steady-State |
| Spectral Range | 350–2400 nm |
| Correlated Color Temperature | 5250 K |
| Beam Divergence | <3° |
| Illuminated Area Diameter at 3 m | 20 cm |
| Irradiance Uniformity | ≥98% |
| Typical Irradiance at 3 m | ~1000 W/m² (AM1.5G equivalent) |
| Control Interface | Software-Driven Digital Control System |
| Light Source Technology | Multi-Lamp Plasma-Based Architecture |
| Compliance | Designed to meet ASTM E927-23, IEC 60904-9 Ed. 3, ISO 9276-2 for spectral match and spatial uniformity requirements |
| Brand | CEAULIGHT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Origin Category | Domestic (China) |
| Models | CEL-AAAS50, CEL-AAAS100 |
| Price | ¥155,800 |
| Trigger Mode | Steady-State |
| Brand | CEL (Zhongjiao Jin Yuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | CEL-AFS |
| Pricing | Upon Request |
| Brand | CEA |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | CEL-AFS1000 |
| Price Range | USD 14,000 – 42,000 |
| Trigger Mode | Pulsed Xenon |
| Spectral Class | IEC 60904-9 AM1.5G Class A |
| Illuminated Area | 1000 px × 1000 px (≈ 25.4 cm × 25.4 cm) |
| Irradiance Uniformity | ±2% |
| Long-Term Instability (LTI) | ±1% |
| Short-Term Instability (STI) | ±0.5% |
| Pulse Width | 10 ms |
| Lamp Lifetime | 200,000 flashes |
| Irradiance Range | 200–1200 mW/cm² (calibrated at 1000 mW/cm²) |
| Voltage Measurement Range | 0–1.000 V |
| Current Measurement Range | 0–0.2 A / 0–2.0 A / 0–12.0 A |
| Reverse Voltage Range | 0–20 V |
| Reverse Current Range | 0–5 A |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Temperature Resolution | 0.1 °C |
| Measurement Repeatability | < ±0.5% |
| Test Cycle Time | < 2 s |
| Brand | CEAULIGHT (Zhongjiaojinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CEL-EQE |
| Price Range | USD 14,000 – 70,000 |
| Measurement Mode | DC |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | CEL-IV |
| Price | USD 22,800 (FOB) |
| Trigger Mode | Steady-State |