Other Optical Measurement Instruments
Filter
Showing 121–150 of 663 results
| Brand | DataRay |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | PPBS |
| Price Range | USD $0–7,200 (est.) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | WinCam-IR-BB |
| Price Range | USD $13,500 – $27,000 |
| Brand | DataRay |
|---|---|
| Origin | USA |
| Model | WinCamD-IR-BB |
| Detector Type | VOx microbolometer array |
| Spectral Range | 2–16 µm |
| Active Area | 10.88 × 8.16 mm |
| Resolution | 640 × 480 pixels |
| Pixel Pitch | 17 µm |
| Interface | USB 3.0 (bus-powered) |
| ADC | 14-bit |
| Time Constant | 14 ms |
| Frame Rate | 7.5 fps |
| Cooling | Uncooled (no TEC or chopper required) |
| Compliance | RoHS, CE |
| Brand | DataRay |
|---|---|
| Origin | USA |
| Model Series | WinCamD-LCM, WinCamD-IR-BB, WinCamD-QD, TaperCamD-LCM |
| Detector Types | CMOS, VOx microbolometer, quantum dot |
| Wavelength Ranges | 190–1150 nm (UV-VIS-NIR), 355–1350 nm, 1480–1605 nm, 350–2000 nm, 2–16 µm |
| Pixel Sizes | 3.2–17 µm |
| Active Areas | 6.5 × 4.9 mm to 25 × 25 mm |
| Interface | USB 3.0 or GigE |
| Bit Depth | 12–14 bit |
| Frame Rates | 7.5–25 fps (model-dependent) |
| Shutter | Global shutter, electronic auto-shutter (79 µs – 2 s) |
| SNR | ≥2100:1 (QD), 2500:1 (LCM) |
| M² Measurement | Fully automated, compliant with ISO 11146-1:2005 & ISO 11146-2:2005 |
| Brand | DataRay |
|---|---|
| Origin | USA |
| Model | S-WCD-QD-1550 / S-WCD-QD-2000 |
| Wavelength Range | 400–1700 nm / 350–2000 nm |
| Pixel Size | 15 µm |
| Resolution | Up to 1920 × 1080 |
| Effective Sensor Area | Up to 28.8 × 16.2 mm |
| Bit Depth | 14-bit ADC |
| Shutter Type | Global Shutter |
| SNR | ≥2100:1 (33 dB optical / 66 dB electrical) |
| Frame Rate | Up to 25 fps |
| Interface | GigE or USB 3.0 |
| Compliance | ISO 11146-1:2005, ISO 11146-2:2005 |
| Brand | TP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Origin | Domestic (China) |
| Model | GY-9 |
| Pricing | Upon Request |
| Brand | Drick |
|---|---|
| Model | DRK122 |
| Measurement Principle | Integrating Sphere with C-Illuminant (6774 K) |
| Compliance | GB 2410–80, ASTM D1003–07 (not D1033), JIS K7105–81 |
| Transmittance Range | 0–100.0% (resolution: 0.1%) |
| Haze Range | 0–99.00% (0–30% absolute, 30–99% relative |
| resolution | 0.01%) |
| Repeatability | ±0.5% for transmittance, ≤±0.5% (or ±0.05% for low-haze samples) for haze |
| Sample Port Aperture | 25 mm (input), 21 mm (output) |
| Specimen Size | 50 mm × 50 mm (solid), 50 mm × 50 mm × 10 mm (liquid cell) |
| Light Source | 12 V / 50 W tungsten-halogen lamp with C-illuminant color correction filter |
| Detector | Silicon photodiode with photopic luminosity function (V(λ)) correction |
| Power Supply | 220 V AC, 50 Hz |
| Operating Temperature | 10–50 °C |
| Dimensions | 740 mm × 270 mm × 300 mm |
| Weight | Approx. 18 kg |
| Brand | Duma Optronics |
|---|---|
| Origin | Israel |
| Model | AlignMeter USB |
| Spectral Range | 350–1100 nm |
| PSD Size Options | 9 mm × 9 mm or 4 mm × 4 mm |
| Position Measurement Range | up to Ø8 mm (9 mm PSD) / up to Ø3 mm (4 mm PSD) |
| Angular Measurement Range | ±90 mrad (full 180 mrad span) |
| Angular Resolution | 0.005 mrad |
| Angular Accuracy | ±0.125 mrad |
| Position Resolution | 0.1 µm |
| Position Absolute Accuracy | ±15 µm |
| Power Measurement Range | 10 µW – 10 mW (with ND filters) |
| Power Accuracy | ±5% |
| Update Rate | up to 150 Hz (with 500 Hz digital filtering) |
| Interface | USB 2.0 (bus-powered) |
| ADC Resolution | 24-bit |
| Operating Temperature | 0–35 °C |
| Lens Type | Plano-convex achromatic, AR-coated |
| Beam Splitter | 50:50 non-polarizing, AR-coated |
| Brand | Duma Optronics |
|---|---|
| Country of Origin | Israel |
| Model | M2-Beam |
| Wavelength Range | 190–1800 nm |
| Beam Diameter Measurement Range | Up to 15 mm |
| Power Range | 100 µW–1 W (Si), 100 µW–5 mW (InGaAs/UV) |
| Detector Types | Si, UV-enhanced Si, InGaAs |
| Blade Aperture Configurations | 7-blade scanning slit (10×10 mm² Si/UV |
| Measurement Principle | Scanning Slit Method per ISO 11146-1:2005 |
| Compliance | ISO 11146, ANSI Z136.1, IEC 60825-1 |
| Brand | Duma Optronics |
|---|---|
| Origin | Israel |
| Model | M2Beam-Si |
| Spectral Range (Si) | 350–1100 nm |
| Detector Type | Silicon photodiode array |
| M² Accuracy | ±5% |
| Maximum Measurable Beam Diameter (with lens) | 25 mm |
| Scanning Step Resolution | 100 µm |
| Scan Length | 280 mm |
| Lens Focal Length | 300 mm @ 632.6 nm |
| Beam Power Range (Si) | 100 µW – 1 W (with internal filter wheel) |
| Physical Dimensions | 100 × 173 × 415 mm |
| Weight | 2.5 kg |
| Interface | USB 3.0 |
| Compliance | ISO 11146-1:2005, ISO 11146-2:2005, ISO 13694:2000 |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | EMIRS50_AT06V_BR26M |
| Housing | TO-46 metal can |
| Emission Spectrum | 2–14 µm (blackbody-like) |
| Modulation Speed | kHz-range electrical modulation (chopper-free) |
| Emission Surface | Integrated reflective cavity (BR26M variant) |
| Window Options | Sapphire or Barium Fluoride (BaF₂) |
| Power Consumption | Low, typically <150 mW operating power |
| Lifetime | >50,000 hours MTTF |
| MEMS Architecture | Silicon-based micro-hotplate with dielectric emissive coating |
| Compliance | RoHS, REACH, ISO 9001-manufactured |
| Brand | SYNOPTICS |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Er:YAG |
| Wavelength Emission | 2.94 µm |
| Host Material | Y₃Al₅O₁₂ (YAG) |
| Er³⁺ Doping Concentration | 50 at.% (~7×10²⁰ cm⁻³) |
| Crystal Orientation | [111] ±5° |
| Wavefront Distortion | ≤λ/2 per inch @ 1 µm (double-pass interferometric measurement) |
| Diameter Tolerance | +0.000"/−0.002" |
| Length Tolerance | +0.040"/−0.000" |
| Surface Finish | 55 ±5 µin Ra |
| Edge Chamfer | 0.005" ±0.003" @ 45° ±5° |
| Surface Flatness | λ/10 @ 633 nm |
| Parallelism | ≤30 arcsec |
| Perpendicularity | ≤5 arcmin |
| Surface Quality | 10-5 (MIL-O-13830A) |
| AR Coating | R < 0.25% @ 2.94 µm |
| Coating Adhesion & Durability | Compliant with MIL-C-48497A |
| Pulsed Laser Damage Threshold | >10 J/cm² |
| Pump Band | 600–899 nm |
| Stimulated Emission Cross Section | 3×10⁻²⁰ cm² |
| Upper Laser Level | ⁴I₁₁/₂ → ⁴I₁₃/₂ |
| Brand | ET Enterprises |
|---|---|
| Origin | United Kingdom |
| Model | 9110v02 |
| Housing Material | Borosilicate Glass Window |
| Spectral Response Range | 280–630 nm |
| Typical Quantum Efficiency | 22–30% |
| Minimum Dark Current | 0.01 nA |
| Maximum Gain | 8 × 10⁷ |
| Rise Time | 1.5 ns |
| Cathode Type | Bialkali (S-20 derivative) |
| Effective Cathode Diameter | 25 mm |
| Operating Temperature Range | –30 °C to +50 °C |
| Base Configuration | 10-stage Linear Focused Dynode Structure |
| Vacuum Integrity | <1 × 10⁻⁶ Pa (long-term stable) |
| Compliance | RoHS 3, CE Marked for EMC Directive 2014/30/EU |
| Brand | EURO TECH |
|---|---|
| Model | ET1301 |
| Measurement Range | 0–100 µg/L (Chlorophyll a) |
| Detection Principle | Pulse-Amplitude Modulated (PAM) Fluorescence |
| Linearity | R² = 0.998 |
| Weight | 0.65 kg |
| Dimensions | 190 × 105 × 60 mm |
| Operating Temperature | 5–40 °C |
| Power Supply | 4 × AA batteries (5 V DC nominal) |
| Data Storage Capacity | 500 measurement sets |
| Environmental Rating | IPX4 (splash-resistant) |
| Sample Cell | 1 × 1 mm quartz cuvette (non-matched, low-sensitivity-to-cell-variability design) |
| Input Parameters | pH, temperature, turbidity (manual entry) |
| Output Interface | ASCII via USB |
| Brand | Excelitas |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | SPCM-AQRH / SPCM-AQRH-XX-TR |
| Wavelength Range | 400–1060 nm |
| Peak Photon Detection Efficiency (PDE) | >70% @ 700 nm (standard) |
| Active Area Diameter | 180 µm |
| Timing Resolution | <250 ps (TR variant) |
| Maximum Count Rate | >35 Mcps |
| Output | TTL-compatible, 50 Ω terminated via BNC |
| Power Supply | +5 V DC only |
| Operating Temperature Stability | Engineered for low-drift performance in lab environments |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model | BeamPro |
| Sensor Types | CMOS (UV–Vis–NIR), InGaAs (SWIR) |
| Pixel Sizes | 1.45–33.00 µm |
| Spectral Ranges | 190–1100 nm (UV-extended), 375–1100 nm, 400–1700 nm, 900–1700 nm |
| Max Resolution | 5472 × 3648 (20.0 MP) |
| Min Measurable Beam Diameter (FWHM) | ≤10 µm (CMOS), ≤25 µm (InGaAs) |
| Shutter Types | Rolling & Global |
| Interface | USB 3.1 (standard), GigE (TE-cooled SWIR models) |
| Bit Depth | 12/16-bit (HDR option available) |
| Trigger Support | Yes (hardware & software sync) |
| Vacuum Compatibility | Select models (upon request) |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model Series | FROG-FC, FROG-FS, FROG-PS1, FROG-PS3 |
| Spectral Range | 480–2100 nm (FAST FROG), 500–2100 nm (MS-FROG) |
| Pulse Duration Coverage | 4 fs – 80 ps |
| Detection | CMOS, 12-bit, 3 Mpx, 72 dB dynamic range |
| Interface | USB 3.1 |
| Beam Height | 69–148 mm |
| Dimensions | 326 × 194 × 129 mm |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model | Nano4th (1064 nm / 532 nm / 266 nm) |
| Output Wavelengths | 1064 nm, 532 nm, 266 nm |
| Average Power (at 80 MHz) | 2 W @ 1064 nm, 1 W @ 532 nm, 750 mW @ 266 nm, 170 mW @ 266 nm (4th harmonic) |
| Pulse Duration | <120 fs (fundamental & SHG), <65 fs (THG), <60 fs (estimated for 4th harmonic) |
| Repetition Rate | 80 MHz |
| Conversion Efficiency | >45% (SHG), >35% (THG), >8% (4th harmonic) |
| Polarization | Vertical (1064 nm), Horizontal (532 nm), Vertical (266 nm) |
| Laser Compatibility | 1030–1064 nm fundamental, nJ-level pulse energy, MHz-repetition-rate ultrafast oscillators |
| Brand | FEMTOEASY |
|---|---|
| Origin | France |
| Model Series | FC, FS, PS1, PS3, PS5, PS10, µ-ROC, MS-ROC, MS-ROC-LP, MS-ROC-SP, MS-ROC-SLP |
| Wavelength Range | 480–2200 nm |
| Pulse Duration Coverage | 4 fs – 80 ps |
| Input Repetition Rate | Single-shot to GHz |
| Detection | CMOS, 12-bit, 3 Mpx, 72 dB dynamic range |
| Interface | USB 3.1 (GigE optional) |
| Beam Height Adjustment | 30 mm (standard), up to 148 mm (MS-series) |
| Integrated ND Filter Wheel | Yes |
| Polarization Requirement | Linear (horizontal or vertical) |
| Trigger Support | External TTL sync up to 125 kHz (with Enhanced Detection option) |
| Key | Origin: USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FR-103 |
| Price Range | USD 6,800 – 13,600 |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | FST-1 |
| Pricing | Available Upon Request |
| Wavelength Scanning Method | Manual |
| Data Recording | Manual & Computer-Automated |
| Strain Sensing Resolution | <10 με |
| Temperature Sensing Resolution | <1 °C |
| Wavelength Range (ASE Source) | 1525–1565 nm (C-band) |
| ASE Source & EDFA | Independently Operable |
| System Composition | FBG Test Unit + FBG Sensing Unit |
| Interface | RS-232 Serial Communication |
| Key | Brand: AOS / Advanced Optics Solutions |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DV-1000 Monitoring Unit for Single FBG |
| Pricing | Available Upon Request |
| Key | Brand: AOS/Advanced Optics Solutions |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Monitoring Unit for Cascaded FBG |
| Pricing | Upon Request |
| Brand | AOS/Advanced Optics Solutions |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Wavelength Reference |
| Pricing | Available Upon Request |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | 248 |
| Pricing | Available Upon Request |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | IO-H-1064 / IO-G-1310 / IO-F-1550 / IO-K-1064-CO (Multi-Model Platform) |
| Operating Wavelengths | 780–1550 nm |
| Max CW Power Handling | 250 mW to 20 W |
| Isolation | 27–42 dB |
| Insertion Loss | 0.3–2.0 dB |
| PDL | ≤0.25 dB (Polarization-Independent), N/A (Polarization-Dependent) |
| Extinction Ratio | >20 dB (PD), >50 dB (PI) |
| Return Loss | >50 dB |
| Fiber Types | HI1060, SMF-28e, PM980/1064, PM1300, PM1550, 780HP, SM800, SM980/1060 |
| Brand | KLA-Filmetrics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | F20 |
| Price Range | USD $28,000–$50,000 |
| Measurement Principle | Spectral Reflectance Interferometry |
| Thickness Range | 15 nm – 450 µm |
| Thickness Resolution | ≤0.1 nm (1 Å) |
| Thickness Repeatability | ±0.7 Å |
| Measurement Time | 1–2 s per spot |
| Spectral Range Options | 200–1700 nm (configurable by model variant: UV, VIS-NIR, EXR, NIR) |
| Sample Compatibility | Smooth, transparent or semi-transparent films on reflective or transmissive substrates |
| Optical Constants Measured | n (refractive index), k (extinction coefficient), surface roughness (via effective medium approximation) |
| Software Platform | Filmetrics F20™ Suite (Windows-based, USB-connected) |
| Compliance | Supports GLP/GMP audit trails, ASTM E2386-22 (Standard Practice for Spectral Reflectance-Based Film Thickness Measurement), ISO/IEC 17025 traceable calibration protocols |
| Brand | Optec |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FN-T50 |
| Price Range | USD 70,000 – 112,000 |
| Origin | UK |
|---|---|
| Manufacturer Type | Distributor |
| Import Status | Imported |
| Model | SXGA-3DM |
| Price Range | USD 38,000–64,000 |
| Resolution | 1280 × 1024 pixels |
| Modulation Type | Pure-amplitude reflective SLM |
| Switching Speed | 40 µs |
| Frame Rate | 3.2 kHz |
| Fill Factor | >96% |
| Wavelength Range | 430–760 nm |
| Onboard Memory | 768 full-resolution grayscale frames |
| Trigger Interface | TTL-compatible input/output |
| Data Interfaces | RS-232, USB 2.0 |
| Technology | Ferroelectric liquid crystal (FLC) on silicon with temporal imaging architecture |
| Brand | TOP |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | WSY-3 |
| Pricing | Available Upon Request |