Pumps
Filter
Showing 691–720 of 1131 results
| Brand | HNPM (Comet诺) |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Imported |
| Model | MZR-7208 |
| Pricing | Available Upon Request |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | IM-21 |
| Instrument Type | Microsyringe Pump |
| Plunger Stroke | 20 mm |
| Full-Rotation Knob Resolution | 500 µm per revolution |
| Volume Displacement per Full Rotation | 10 µL |
| Repeatability | ±0.1 µL (typical, under controlled conditions) |
| Dimensions (W × D × H) | 127–147 mm × 56 mm × 78 mm |
| Weight | 620 g |
| Tubing Length | 1 m |
| Accessories Included | IM-H3 Syringe Holder, O-rings (IMO4), Silicone Gasket (HIO1PK01), Cleaning Rod, Silicone Grease |
| Brand | Nippon Scientific |
|---|---|
| Origin | Japan |
| Model | SP-D-2502 |
| Flow Rate Range | 0.15–1.5 mL/min (50 Hz) / 0.18–1.8 mL/min (60 Hz) |
| Max Delivery Pressure | 10 MPa |
| Wetted Materials | SUS316, Sapphire, Ruby, Ceramics, PTFE |
| Dimensions | 250 × 190 × 126 mm (W×D×H) |
| Weight | 3.5 kg |
| Power Supply | AC 100 V, 50/60 Hz |
| Brand | TAMASAKI |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DPC-201N12 |
| Drive Method | Manual |
| Measurement Range | ±200.0 Pa |
| Display Resolution | 0.1 Pa |
| Accuracy | ±0.1% FS ±1 digit |
| Temperature Drift | ±0.12% FS/°C |
| Display Update Interval | 0.1 s |
| Analog Output | 1–5 V (fully scalable) |
| Warm-up Time | 10 min |
| Sensor Type | Silicon Diaphragm |
| Compatible Media | Non-corrosive and mildly corrosive gases |
| Overpressure Limit | 10 kPa |
| Static Pressure Range | 30 kPa |
| Operating Ambient Temperature | 0–45°C (40°C max with AC adapter) |
| Dimensions | 96 × 96 × 141 mm (W × H × D) |
| Weight | 0.9 kg (excl. AC adapter) |
| Pressure Port | Φ8 mm hose barb (convertible to PT1/4 internal thread) |
| Power Supply | DC 12 V ±10% via included AC adapter (AC 100 V input, 10 W consumption) |
| Standard Functions | Hi/Go/Lo contact outputs (AC 250 V, 2 A), contact hysteresis setting (0–20 digits), moving average time setting (0–20 s), analog output scaling, zero-hold external signal input (dry contact) |
| Brand | Otisense |
|---|---|
| Origin | Tianjin, China |
| Model | AP-01P |
| Pump Type | Diaphragm (Oil-Free) |
| Ultimate Vacuum | ≥80 kPa (≈23.6 inHg / −20 psi gauge) |
| Maximum Pressure | Not specified |
| Flow Rate | 10 L/min |
| Motor Power | 35 W |
| Dimensions (W×H×D) | 246 × 190 × 135 mm |
| Weight | 3.1 kg |
| Power Supply | AC 220 V, 50 Hz |
| Housing Materials | Polyphenylene Sulfide (PPS) and Polytetrafluoroethylene (PTFE) |
| Compliance | CE-marked per IEC 61000-6-3 (EMC) and IEC 61000-6-2 (Immunity) |
| Brand | Otisience |
|---|---|
| Origin | Tianjin, China |
| Model | AP-01D |
| Pump Type | Diaphragm-Type Oil-Free Vacuum/Pressure Pump |
| Ultimate Vacuum | 80 kPa (≈20 psi vacuum) |
| Max Pressure Output | Not Specified |
| Flow Rate | 10 L/min |
| Motor Power | 35 W |
| Dimensions (W×H×D) | 246 × 190 × 135 mm |
| Weight | 3.2 kg |
| Power Supply | AC 220 V / 50 Hz |
| Construction Materials | PPS (Polyphenylene Sulfide) & PTFE (Polytetrafluoroethylene) |
| Compliance | CE-marked design principles |
| Brand | Otisience |
|---|---|
| Model | AP-02B |
| Type | Diaphragm-Based Oil-Free Dual-Head Vacuum/Pressure Pump |
| Vacuum Range | 0–80 kPa (adjustable) |
| Maximum Pressure Output | >150 kPa |
| Flow Rate | 10,000 mL/min |
| Power Consumption | 45 VA |
| Input Voltage | AC 220 V / 50 Hz |
| Dimensions (W×H×D) | 230 × 85 × 200 mm |
| Weight | 2.5 kg |
| Compliance | CE-marked design for laboratory use under IEC 61010-1 |
| Brand | Otisience |
|---|---|
| Model | AP-9100A |
| Pump Type | Oil-Free Diaphragm Pump |
| Vacuum Range | 0–95 kPa (gauge), Max Absolute Vacuum >500 kPa (i.e., <50 kPa abs) |
| Pressure Output | Up to 95 kPa (gauge) |
| Flow Rate | 80 L/min |
| Motor Power | 250 W |
| Dimensions (W×H×D) | 270 × 180 × 246 mm |
| Weight | 11.2 kg |
| Power Supply | 220 V / 50 Hz |
| Construction | PPS (Polyphenylene Sulfide) and Anodized Aluminum Housing |
| Compliance | CE-marked, RoHS-compliant, Designed for GLP-Compatible Lab Environments |
| Brand | Otisience |
|---|---|
| Origin | Tianjin, China |
| Model | AP-9925(N) |
| Type | Diaphragm-Type Oil-Free Vacuum Pump |
| Ultimate Vacuum | <15 kPa (abs) |
| Pumping Speed | 25 L/min |
| Motor Power | 50 W |
| Dimensions (W×D×H) | 230 × 130 × 160 mm |
| Weight | 3.1 kg |
| Voltage/Frequency | 220 V / 50 Hz |
| Pressure Regulation | Manual Knob-Controlled Dual-Port (Vacuum & Positive Pressure) |
| Diaphragm & Cylinder Surface | PTFE-Coated |
| Compliance | CE-marked per EN 61000-6-3 & EN 61000-6-2 (EMC), RoHS 2015/863/EU |
| Brand | Otisience |
|---|---|
| Model | AP-9950 |
| Type | Oil-Free Dual-Head Vacuum Pump |
| Ultimate Vacuum | >85 kPa (gauge, adjustable) |
| Max Positive Pressure | >500 kPa (gauge) |
| Pumping Speed | 40 L/min |
| Power | 60 W |
| Dimensions (W×D×H) | 230 × 145 × 160 mm |
| Weight | 3.8 kg |
| Input Voltage | 220 V / 50 Hz |
| Configuration | Dual-head (parallel/series switchable) |
| Control | Manual pressure regulation knob |
| Compliance | CE-marked design principles, RoHS-compliant materials |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Dry Vacuum Pump |
| Model | A 100 L, A 200 L |
| Pumping Speed | 100 m³/h (A 100 L), 200 m³/h (A 200 L) |
| Ultimate Pressure | 6.6 × 10⁻³ hPa (A 100 L), 8 × 10⁻³ hPa (A 200 L) |
| Inlet Flange | DN 50 |
| Noise Level | 55–58 dB(A) |
| Weight | 100 kg |
| Motor Power | 3 kW |
| Cooling | Water-Cooled |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Multi-Stage Roots Vacuum Pump System |
| Model | ACG 600 G |
| Ultimate Pressure (with N₂ purge, 50 Hz) | 9 × 10⁻³ hPa |
| Ultimate Pressure (with N₂ purge, 60 Hz) | 6 × 10⁻³ hPa |
| Pumping Speed (50 Hz) | 480 m³/h |
| Pumping Speed (60 Hz) | 560 m³/h |
| Inlet Flange | DN 100 ISO-K |
| Outlet Flange | DN 40 ISO-KF |
| Cooling | Water-cooled (max. flow: 5 L/min) |
| Motor Power | 2.2 kW (3-phase, 380–480 V) |
| Dimensions (W × D × H) | 872 × 370 × 779 mm |
| Weight | 320 kg |
| Noise Level | 68 dB(A) |
| Max. Gas Throughput | 60 sL/min |
| Ambient Temperature Range | 5–40 °C |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | France |
| Model | ACP 120 |
| Pump Type | Oil-Free Dry Scroll Vacuum Pump |
| Ultimate Pressure | ≤3 × 10⁻² mbar |
| Pumping Speed | 95 m³/h |
| Motor Power | 3 kW |
| Noise Level | <65 dB(A) |
| Weight | 205 kg |
| Inlet Flange | DN 50 |
| External Dimensions (L×W×H) | 1000 × 600 × 700 mm |
| Maintenance Interval | ~17,000 operating hours |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Lubricated Rotary Lobe (Roots) Booster with Dual-Stage Forevacuum Pump |
| Model Designation | WD Series (WD 220 / WD 400 / WD 900 / WD 1800) |
| Nominal Pumping Speed (at 1 mbar, 50 Hz) | 220–1800 m³/h |
| Ultimate Pressure (with DuoLine forepump) | ≤ 5 × 10⁻⁴ mbar |
| Motor Power | 1 kW (forepump dependent |
| Weight | 220–980 kg (model-dependent) |
| Inlet Flange | DN 63–DN 160 |
| Compliance | CE, ISO 8573-1 Class 2 (compressed air quality), RoHS |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Lubricated Rotary Lobe Booster + Forevacuum Pump |
| Ultimate Pressure | ≤2 × 10⁻³ mbar (with UnoLine) / ≤8 × 10⁻³ mbar (with HenaLine) |
| Pumping Speed | 230–5000 m³/h (at 1 mbar, 50 Hz) |
| Inlet Flange | DN63 to DN250 |
| External Dimensions | Up to 1000 × 500 × 1000 mm |
| Weight | 240–2250 kg |
| Motor Power | 5–100 kW |
| Compliance | CE, ISO 9001, RoHS |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Lubricated Rotary Vane |
| Ultimate Pressure | 3 × 10⁻³ hPa |
| Pumping Speed | 2.5 m³/h (50 Hz) / 2.9 m³/h (60 Hz) |
| Noise Level | ≤ 53 dB(A) |
| Weight | 11.3 kg |
| Inlet/Outlet Flange | DN 16 ISO-KF |
| Motor | Single-Phase or Three-Phase Options Available |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Lubricated Rotary Vane |
| Series | DuoLine |
| Ultimate Pressure | 2–7 × 10⁻³ hPa (depending on model) |
| Operating Temperature Range (Duo 3 DC) | −20 °C to +60 °C |
| Motor Options | Single-phase / Three-phase / 24 V DC |
| Noise Level | 48–75 dB(A) |
| Weight | 7–380 kg |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Turbo Molecular Pump |
| Model | HiPace 2300 |
| Nominal Pumping Speed (N₂) | 2050 L/s |
| Ultimate Pressure (N₂) | < 1 × 10⁻⁷ hPa |
| Compression Ratio (N₂) | > 1 × 10⁸ |
| Cooling Method | Integrated Water Cooling |
| Inlet Flange | DN 250 (ISO-F / ISO-K / CF-F options) |
| Drive Electronics | Integrated TC 1200 Controller |
| Protection Rating | IP54 |
| Startup Time | 4.0 min |
| Weight | 34 kg |
| Mounting Orientation | 0°–90° (including inverted U-variant and corrosion-resistant C-variant) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Turbo Molecular Pump |
| Model | HiPace 2300 |
| Pumping Speed (N₂) | 1900 L/s |
| Pumping Speed (He) | 2000 L/s |
| Ultimate Pressure (N₂) | 1 × 10⁻⁷ hPa |
| Ultimate Pressure (Ar) | 5 × 10⁻¹⁰ hPa |
| Rotational Speed | 31,500 rpm ±2% |
| Starting Time | ≤4 min |
| IP Rating | IP54 |
| Cooling | Integrated Water-Cooling System |
| Weight | 36.6 kg |
| Certifications | SEMI S2, UL, CSA, TÜV |
| Compliance | Fully Compatible with GLP/GMP Environments and FDA 21 CFR Part 11–Ready Data Logging Systems |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiPace 2800 IT |
| Pump Type | Oil-Free Turbo Molecular Pump |
| Pumping Speed (N₂) | 2,300 L/s |
| Ultimate Pressure | < 1 × 10⁻⁷ hPa |
| Flange (Inlet) | DN 250 ISO-F |
| Flange (Outlet) | DN 40 ISO-KF |
| Exhaust Connection | G 1/8" |
| H₂ Pumping Speed | 2,600 L/s |
| He Pumping Speed | 2,900 L/s |
| Ar Pumping Speed | 2,100 L/s |
| Rated Rotational Speed | 27,300 rpm ±2% |
| Warm-up Time to Full Speed | 8.6 min |
| Compression Ratio (N₂) | > 1 × 10⁸ |
| Compression Ratio (H₂) | 4 × 10³ |
| Max. Forevacuum Pressure (N₂) | 0.8 hPa |
| Cooling Method | Water Cooling (100 L/h, 15–25 °C) |
| Weight | 62 kg |
| Dimensions (W × H) | 228 × 167 mm |
| Motor Power | 1 kW |
| Interface | E74, RS-485 |
| Max. Permissible Magnetic Field | 3.4 mT |
| Sound Pressure Level | < 50 dB(A) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Turbo Molecular Pump |
| Model | HiPace® 30 |
| Pumping Speed (N₂) | 32 L/s |
| Ultimate Pressure (N₂) | < 5 × 10⁻¹⁰ hPa |
| Weight | 3.2 kg |
| Operating Voltage | 24 V DC (±5%) |
| Maximum Rotational Speed | 90,000 rpm |
| Startup Time | 1.7 min |
| Bearing System | Hybrid Ceramic Ball Bearings |
| Compression Ratio (N₂) | > 1 × 10¹¹ |
| Compression Ratio (H₂) | 3 × 10⁷ |
| Compression Ratio (He) | 3 × 10⁷ |
| Inlet Flange Options | DN 63 ISO-K, DN 63 CF-F, DN 40 ISO-KF |
| Exhaust Flange | DN 16 ISO-KF, G ¼" |
| Cooling | Convection (standard), Optional Air or Water Cooling (75 L/h, 5–25 °C) |
| Communication Interface | RS-485, Remote Control |
| Protection Rating | IP 54 / IP 30 (depending on configuration) |
| Magnetic Field Tolerance | ≤ 3 mT |
| Installation Orientation | Any Position |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | HiPace 700 |
| Pump Type | Oil-Free Turbo Molecular Pump |
| Pumping Speed for N₂ | 685 L/s |
| Ultimate Pressure (N₂) | < 5 × 10⁻¹⁰ hPa |
| Weight | 17.4 kg |
| Protection Rating | IP54 |
| Certifications | SEMI S2, UL/CSA |
| Operating Voltage | 48 V DC |
| Max. Rotational Speed | 49,200 rpm ±2% |
| Startup Time | 2 min |
| Compression Ratios (Ar/N₂ >1×10¹¹, H₂ | 4×10⁵, He: 3×10⁷) |
| Gas Flow Capacity (N₂ @ full speed) | 6.5 hPa·L/s |
| Magnetic Field Tolerance | ≤6 mT |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Turbo Molecular Pump |
| Model | HiPace 80 |
| Nominal Pumping Speed (N₂) | 71 L/s |
| Compression Ratio (N₂) | >1×10¹¹ |
| Ultimate Pressure (N₂) | <1×10⁻⁷ hPa |
| Maximum Starting Pressure (N₂) | 2.2 mbar |
| Pumping Speed (He) | 58 L/s |
| Pumping Speed (H₂) | 48 L/s |
| Inlet Flange | DN 63 ISO-K / DN 63 CF-F / DN 40 ISO-KF |
| Cooling | Natural Air Cooling |
| Enclosure Rating | IP54 |
| Certifications | UL/CSA, Semiconductor S2 |
| Mounting | Omnidirectional |
| Weight | 1.75 kg |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | OktaLine |
| Pump Type | Oil-Sealed Roots Vacuum Pump |
| Pumping Speed | 250–25,000 m³/h |
| Ultimate Pressure | 10⁻²–75 mbar |
| Motor Power | 0.75–45 kW |
| Weight | 95–3,100 kg |
| Cooling Method | Air-Cooled |
| Drive System | Magnetic Coupling (Okta M variants) |
| Compliance | ATEX-certified options available for explosive atmospheres |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | France |
| Pump Type | Oil-Free Dry Scroll |
| Ultimate Vacuum | 1 × 10⁻² mbar |
| Pumping Speed | 15–40 m³/h (ACP 15: 14 m³/h, ACP 28: 27 m³/h, ACP 40: 37 m³/h) |
| Maximum Inlet Pressure | 1000 mbar (abs) |
| Base Weight | 23–32 kg |
| Motor Supply | Single- or Three-Phase |
| Certifications | CE, UL/CSA, SEMI S2 |
| Gas Ballast Option | Standard (SD), Corrosion-Resistant (G), Water-Vapor-Tolerant (CV) |
| Maintenance Interval | 20,000–22,000 hours (full overhaul) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Adixen Pascal SD (1005 SD & 1015 SD) |
| Pump Type | Oil-Lubricated Rotary Vane Pump |
| Pumping Speed | 6 m³/h (1005 SD, 50 Hz) / 16.5 m³/h (1015 SD, 60 Hz) |
| Ultimate Pressure | 5 × 10⁻² hPa (with gas ballast) |
| Motor Power | 0.45 kW |
| Weight | 21 kg (1005 SD) / 24.5 kg (1015 SD) |
| Inlet/Outlet Flange | DN 25 ISO-KF |
| Gas Ballast Valve | Standard |
| Lubrication | Integrated mineral oil reservoir (supplied with pump) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Model | ATH 1600 MT |
| Pump Type | Oil-Free Turbomolecular Pump |
| Pumping Speed (N₂) | 1360–1600 L/s |
| Ultimate Pressure | < 6 × 10⁻⁹ hPa |
| Rotational Speed | 39,000 rpm |
| Bearing System | 5-Axis Active Magnetic Levitation |
| Compression Ratio (N₂) | > 1 × 10⁸ |
| Max. Inlet Pressure (N₂) | 2.2 hPa |
| Startup Time | < 6 min |
| Weight | 34 kg (pump) + 8 kg (power supply & controller) |
| Cooling | Water-Cooled |
| Optional Features | Heated anti-corrosion housing, remote control interface, ISO-F/CF-F flange variants (DN 200/DN 250) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | France |
| Pump Type | Oil-Free Turbomolecular Pump |
| Models | ATH 1600M, ATH 2300M, ATH 2800M, ATH 3200M, ATP 2300M |
| Nominal Pumping Speed (N₂) | 1400–2800 L/s |
| Ultimate Pressure (N₂) | < 6×10⁻⁹ hPa |
| Compression Ratio (N₂) | > 1×10⁸ |
| Maximum Starting Pressure (N₂) | 2.1–2.9 hPa |
| Rotor Speed | Up to 90,000 rpm |
| Bearing System | 5-Axis Active Magnetic Levitation |
| Integrated Heating | Yes (MT variants) |
| Cooling | Water-Cooled |
| Weight | 64–109 kg |
| Inlet Flange | DN 250 or DN 320 |
| Operating Temperature Range | Ambient to 75 °C |
| MT Series | Equipped with integrated heater and water cooling for condensable vapor management |
| Service Life | ≥ 100,000 hours (typical operational lifetime under GLP-compliant conditions) |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Turbo Molecular Pump |
| Oil-Free Operation | Yes |
| Nitrogen Pumping Speed | 350–550 L/s |
| Ultimate Pressure | < 1 × 10⁻⁸ hPa |
| Weight | 17–18 kg |
| Bearing System | 5-Axis Active Magnetic Levitation |
| Max. Rotational Speed | 50,000 rpm |
| N₂ Compression Ratio | > 2 × 10⁷ |
| Max. Inlet Pressure (N₂) | 2.6 hPa |
| Startup Time | < 2 min |
| Cooling Options | Air-Cooled or Water-Cooled |
| Flange Options | DN 100, DN 160 |
| Seal Types | ISO-F, ISO-K, CF-F |
| Compliance | CE Marked, RoHS Compliant |
| Brand | Pfeiffer Vacuum |
|---|---|
| Origin | Germany |
| Pump Type | Dry (Oil-Free) Roots Booster Pump System |
| Base Pump Options | UniDry or HeptaDry Dry Screw Pumps |
| Booster Pump | Okta Series Roots Pumps |
| Nominal Pumping Speed (System) | 240–1800 m³/h |
| Ultimate Pressure (System) | < 2 × 10⁻³ mbar (with HeptaDry base pump) / < 5 × 10⁻³ mbar (with UniDry base pump) |
| Inlet Flange | DN 63 to DN 160 ISO-F |
| Motor Power (Booster) | 0.75–7.5 kW |
| Motor Power (Base Pump) | 3–30 kW |
| Noise Level | ≤80 dB(A) at 1 m distance |
| Weight | 360–840 kg |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |