Synthesis/Reaction Equipment
Filter
Showing 511–540 of 649 results
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLR-HTSR |
| Heating Range | Ambient to 300 °C |
| Temperature Accuracy | ±0.5 °C |
| Max Working Pressure (gauge) | 0–1.6 MPa |
| Reactor Volume (gas phase) | ~18 mL (integral mode: ~27 mL |
| differential mode | ~35 mL) |
| Liquid Fill Capacity | ≤6.5 mL |
| Reactor Body Material | 304 Stainless Steel |
| Optical Window | Sapphire, Ø30 mm, >90% Transmittance in UV-Vis-NIR (200–2500 nm) |
| Gas Inlet/Outlet Fitting | Standard Ø3 mm Swagelok-compatible Compression Fitting |
| Heating Element | Embedded Ni-Chrome Resistive Heater on 96% Al₂O₃ Ceramic Substrate |
| Temperature Sensor | Integrated K-Type Thermocouple with PID Feedback Control |
| Catalyst Support Options | Quartz Fiber Membrane (Ø37–50 mm, active area Ø35 mm), SiC Porous Ceramic Disc |
| Internal Insulation | Glass Fiber–Phenolic Resin Composite |
| Sealing | Fluoroelastomer (FKM) O-Ring |
| Brand | PerfectLight (PerfekLight) |
|---|---|
| Origin | Beijing, China |
| Model | PLR-PTSR II |
| Reaction Pressure | 1.6 MPa (gauge) |
| Maximum Reaction Temperature | 550 °C |
| Catalyst Bed Volume | 12 mL |
| Reactor Material | 304 Stainless Steel |
| Optical Window Transmission Range | 0.19–5 μm |
| Optical Window Diameter | Ø35 mm |
| Gas Volume (Differential Mode) | ~35 mL |
| Gas Volume (Integral Mode) | ~27 mL |
| Liquid Loading Capacity | ≤1.5 mL |
| Catalyst Forms | Powder-on-membrane or porous disc (Ø51 mm, ≤5.5 mm thick) |
| Membrane Support Size | Ø37–Ø50 mm, effective area ≥Ø35 mm |
| Mass Flow Control Range | 3–60 mL/min, ±1% FS |
| Pressure Control Range | 0.3–1.6 MPa (gauge), ±0.25% FS |
| Temperature Control Range | Ambient to 550 °C (N₂), resolution ±0.1 °C |
| Heating Modes | Electric, Photoirradiation, or Coupled Photothermal |
| Temperature Program | Up to 8 segments (isothermal, constant-power, or ramped profiles) |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLR-PTSRⅡ |
| Reactor Type | Flow-through / Batch-integrated Photothermal Reactor |
| Volume | 18 mL (gas phase, sealed mode) |
| Max Operating Pressure | 1.6 MPa (gauge) |
| Max Temperature | 550°C (N₂ atmosphere) |
| Material | 304 Stainless Steel |
| Optical Window | Ø35 mm, Transmission Range: 0.19–5 μm |
| Gas Flow Control Range | 3–60 mL/min, ±1% F.S. |
| Pressure Control Range | 0.3–1.6 MPa |
| Temperature Control Resolution | ±0.1°C |
| Catalyst Format | Powder-on-membrane or porous disc (Ø51 mm, ≤5.5 mm thick) |
| Humidification Capability | Yes, liquid water injection supported |
| Heating Modes | Electrical, Photoirradiation (Xe lamp compatible), or Coupled Photothermal |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLR-QY1000 |
| Light Source | 405 nm Laser Diode (standard), optional wavelengths available |
| Reaction Volume | ~150 mL internal headspace (calibration-dependent) |
| Liquid Sample Volume | 100 mL (adjustable range) |
| Pressure Range | 20–130 kPa (absolute) |
| Purge Gas | N₂, delivery pressure 0.4–0.45 MPa |
| Purge Cycles | 0–255 programmable |
| Residual O₂ | ≤100 ppm after purge |
| Stirring Speed | 250–1250 rpm |
| Temperature Control | 0–60 °C (via external circulating chiller) |
| Humidity & Temperature Monitoring | Integrated in-situ sensors |
| Quantum Yield Range | 0.05%–100% |
| Data Export | USB flash drive interface |
| Compliance | Designed for ISO/IEC 17025-aligned photocatalytic testing workflows |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PLR-QY1000 Quantum Yield Measurement System |
| Temperature Range | 0–60 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Reaction Vessel Count | 1 |
| Reaction Volume Capacity | 100 mL |
| Light Source | 405 nm Laser Diode (Standard), Optional Wavelengths Available |
| Operating Pressure Range | 20–130 kPa |
| Gas Purge Pressure | 0.4–0.45 MPa (N₂) |
| Purge Cycles | 0–255 |
| Residual Oxygen Level | ≤100 ppm |
| Stirring Speed | 250–1250 rpm |
| Measurable Quantum Yield Range | 0.05%–100% |
| Internal Environmental Monitoring | Integrated Temperature & Relative Humidity Sensors |
| Cooling Interface | External Circulating Water Connection |
| Data Export | USB Flash Drive Interface |
| Brand | PerfectLight |
|---|---|
| Origin | Beijing, China |
| Model | PLR-SPRL |
| Effective Illuminated Area | 10×10 cm² (configurable: 5×5, 15×15, 20×20, 25×25 cm²) |
| Liquid Layer Thickness | 1–5 mm (customizable) |
| Reactor Angle Adjustment | 0–90° continuous |
| Flow Rate (Liquid) | 0–1 L/min |
| Carrier Gas Flow | 4–100 mL/min |
| Operating Temperature | Ambient to 60 °C |
| Operating Pressure | Atmospheric (sealed mode up to 50 kPa) |
| Circulating Gas Pump Flow | 1–1.5 L/min |
| Wetted Materials | PA66, PMMA, PP, Fluoroelastomer |
| Brand | PreeKem / Yitao |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | NOVA-2S |
| Price | Upon Request |
| Temperature Range | −20 °C to 350 °C |
| Pressure Range | 0–4 MPa |
| Microwave Power Output | 500 W |
| Magnetron Frequency | 2450 MHz |
| Stirring Mechanism | Magnetic Stirring |
| Reaction Vessel Capacity | 10 mL and 30 mL |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Producer |
| Model | Custom 5L |
| Pricing | Available Upon Request |
| Brand | PufeiLai (PerfectLight) |
|---|---|
| Origin | Beijing, China |
| Model | DN50 |
| Reactor Type | Tubular Continuous-Flow Photoreactor |
| Light Source | Flexible LED Array (365–760 nm, Multi-Wavelength Selectable) |
| Total Unit Power | 7.5 kW |
| Reaction Volume per Channel | 14 L × 2 |
| Max Liquid Flow Rate | 82.5 L/min |
| Tube Material | Borosilicate Glass or Fused Quartz (Customizable per Reaction Chemistry) |
| Dimensions (W×D×H) | 2245 mm × 580 mm × 1235 mm |
| Temperature Range | Ambient to Low-Temperature Operation (External Chiller Required) |
| Reaction Modes | Continuous Flow or Semi-Batch |
| Process Intensification | Integrated Static Mixer for Enhanced Mass & Heat Transfer |
| Application Scope | Homogeneous Liquid–Liquid and Liquid–Solid Photocatalytic Reactions, Radical Chain Reactions Initiated by UV/Visible Light, Solar-Spectrum Simulation |
| Brand | PufeiLai (PerfectLight) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | PLR-PVERS Series |
| Pricing | Available Upon Request |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FGJ |
| Price | USD 2,100 (approx.) |
| Construction Material | Borosilicate Glass & Stainless Steel (KF Vacuum Components) |
| Operating Pressure Range | Low Vacuum to High Vacuum (Mechanical Pump: ≤50 Pa |
| Turbo-Molecular Pump | ≤5×10⁻⁴ Pa) |
| Leak Rate | ≤2×10⁻¹¹ Pa·m³/s |
| Tube Capacity | Up to 1 L |
| Max. Tube OD | 45 mm |
| Min. Tube OD | 8 mm |
| Max. Tube Wall Thickness | 2 mm |
| Max. Tube Length | 500 mm |
| Rotational Speed | 0–20 rpm (adjustable via precision potentiometer, digitally displayed) |
| Vacuum Interface | KF25 |
| Inlet Fitting | 6 mm Swagelok compression |
| Included Accessories | KF25 Gate Valve ×1, KF25 Bellows ×1, KF16 Vent Valve ×1, KF16 Mechanical Vacuum Gauge ×1, Torch Mounting Fixture ×1, Polarizing Viewer ×1, High-Temperature Gloves ×1, Quartz Tubes (with quartz rods) ×2, Quartz Tube Adapter ×1, KF16 Clamp Set ×1, KF25 Clamp Set ×2, 6 mm Inlet Tubing (3 m), Power Adapter ×1 |
| Brand | REACNOSTICS |
|---|---|
| Origin | Germany |
| Model | CPR |
| Reactor Type | Fixed-Bed |
| Construction Material | Borosilicate Glass |
| Operating Pressure | Up to 50 bar (High-Pressure Variant) |
| Maximum Temperature | 550 °C |
| Catalyst Bed Dimensions | 60 mm isothermal zone, 4 mm inner diameter |
| Optical Access | Integrated quartz windows for Raman, LIF, and UV-Vis spectroscopy |
| Compatibility | Coupled with MS, GC, FTIR, and operando spectroscopic systems |
| Heating Strategy | Zone-controlled external heating to prevent condensation in sampling lines |
| Automation | Fully programmable control unit with real-time data logging and remote operation capability |
| Origin | Anhui, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Basic |
| Price Range | USD 0–2,800 |
| Reaction Volume | Small-scale |
| Construction Material | Stainless Steel (316L grade) |
| Operating Pressure | Low-pressure (≤0.3 MPa gauge) |
| Cooling System | Dual Peltier modules |
| Nominal Cooling Capacity | 110 W × 2 |
| Max. Power Consumption (incl. fans) | 400 W |
| No-load Minimum Temperature | 18 °C |
| Load-bearing Minimum Temperature (under full irradiation) | 28 °C |
| Temperature Control | ON/OFF hysteresis regulation |
| Temp. Stability | ±1 °C |
| Reactor Configuration | Integrated mainframe + interchangeable reaction chamber modules |
| Stirring Speed | 0–1000 rpm (magnetic coupling, single motor drive) |
| LED Power Supply | 4-channel output (24 V DC, 8 A per channel) |
| Total System Power (incl. light sources) | 600 W |
| Illumination Geometry | Tri-directional reflective illumination (front, rear, bottom) |
| Light Source Compatibility | Optimized for Kess-type high-intensity LED or halogen lamps (365 nm, 405 nm, 450 nm, white broadband) |
| Brand | SciDre |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N/A |
| Pricing | Upon Request |
| Brand | Binzhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model Options | 10 mL, 15 mL (also available in 5–500 mL variants) |
| Material | Outer Can – High-Grade Non-Magnetic Stainless Steel |
| Max Operating Pressure | 5 MPa (50 kgf/cm²) |
| Compliance | Designed to meet GB/T 14506.30–2010 and GB/T 14506.1–2010 requirements for silicate rock geochemical analysis |
| Brand | SFT |
|---|---|
| Origin | USA |
| Model | SCWR Series |
| Vessel Volume | 100 mL – 8,000 mL |
| Operating Pressure | 31–35 MPa (4,500–5,000 PSI) |
| Max. Operating Temperature | 500–600 °C |
| Construction Material | Inconel 625 |
| Pump Type | Reciprocating Dual-Piston High-Pressure Water Pump |
| Temperature Control | Fully Automated PID Controller |
| Pressure Regulation | Manual Back-Pressure Valve |
| Structural Design | Compact, Mobile Floor-Standing Frame |
| Optional Components | Preheater (≤500 °C, ≤35 MPa), Post-Cooler, Air/O₂ Compressor, Air/O₂ Mass Flow Controller, H₂O₂ Dosing Pump, In-Line pH Sensor, Gas-Liquid Separator, On-Line Desalination Module, PLC/HMI Touchscreen Interface, SCADA Data Acquisition System |
| Compliance | ASME Section VIII Div. 1 (Optional Certification) |
| Brand | Shan Shi Technology / Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | AF(20) |
| Pricing | Available Upon Request |
| Temperature Control Range | −20 to 80 °C (external chiller/heater required) |
| Light Power Control | 0–12 W or 0–15 W per station (resolution: 0.1 W) |
| Reaction Time Setting | 0–99 h (with preset timing function) |
| Spectral Range | 250–975 nm (≥90 narrow-band LED or filtered lamp options |
| Irradiance Output | Up to 600 mW/cm² (measured at sample plane, typical configuration) |
| Photodegradation Stability | <5% irradiance decay per year |
| Reaction Vessel Compatibility | Standard support for 10 mL, 25 mL, and 50 mL cylindrical quartz or borosilicate reaction tubes |
| Number of Independent Irradiation Stations | 10 |
| Thermal & Mechanical Uniformity | Single-zone temperature bath + synchronized magnetic stirring across all stations |
| Brand | Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | AL(7) |
| Pricing | Available Upon Request |
| Wavelength Range | 365–975 nm |
| Light Intensity | Up to 700 mW/cm² (≈2,000,000 lux) |
| Light Degradation Rate | <5% per year |
| Temperature Control | Ambient to 40 °C via Intelligent Air Cooling |
| Stirring Speed | 300–1500 rpm |
| Sample Vessel Compatibility | NMR tubes |
| Brand | Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | AL(9) |
| Pricing | Available Upon Request |
| Light Wavelength Range | 365–975 nm |
| Maximum Irradiance | ~700 mW/cm² |
| Illuminance | >2,000,000 lux |
| Optical Decay Rate | <5% per year |
| Temperature Control | Air-cooled, 25–40 °C (ambient-adjusted) |
| Magnetic Stirring Speed | 300–1500 rpm |
| Compatible Vessels | NMR tubes, 5/10/20 mL vials, 25/50/100 mL reaction tubes (custom sizes available) |
| Brand | Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | AS(8) |
| Pricing | Upon Request |
| Brand | Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | FG(9) |
| Pricing | Upon Request |
| Brand | Shanghai 3S Technology Co., Ltd |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | FP(2) |
| Pricing | Available Upon Request |
| Brand | Yarong |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RV-605 |
| Instrument Category | Jacketed Glass Reactor |
| Usable Volume | 5 L |
| Construction Material | GG17 Borosilicate Glass |
| Operating Pressure Range | Atmospheric to –0.098 MPa (absolute) |
| Jacket Type | Double-layer Circulating Jacket |
| Stirring Speed | 100–1400 rpm |
| Motor Power | 90 W (120 W peak) |
| Torque | 6000 g·cm |
| Drive System | Brushless AC Speed-Controlled Motor with Digital Frequency Converter |
| Sealing System | PTFE–Glass Dual-Stage Rotary Seal |
| Port Configuration | Five Standard Ground-Glass Ports (NS29/32 & NS24/29), Large-Diameter Bottom Discharge Valve |
| Temperature Control | External Circulating Fluid (e.g., coolant, hot oil, or water) via Jacket |
| Compliance | Designed for GLP-compliant laboratory synthesis workflows |
| Brand | Shinsco |
|---|---|
| Model | SSC-FPCR500C |
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Hold-up Volume | 18 mL (two reaction layers in series + one thermal control layer) / 23 mL (two reaction layers in series + one thermal control layer) |
| Max Operating Pressure | <20 bar |
| Temperature Control Range | −20 °C to 180 °C |
| Thermal Exchange Medium | Water, ethanol, silicone oil (external chiller required) |
| Reactor Material | High-borosilicate glass (transmission >320 nm) |
| Flow Rate Range | 0.1–100 mL/min |
| LED Light Source Options | 365 nm (quartz lens assembly), 395 nm, 405 nm, 420 nm, 455 nm, 470 nm, 500 nm, 520 nm, 590 nm, 620 nm, 660 nm, 740 nm, 810 nm, 850 nm, 940 nm, or broadband white LED (400–800 nm) |
| Cooling Method | Air-cooled or water-cooled (integrated |
| Brand | ShoLyn |
|---|---|
| Origin | Shanghai, China |
| Model | ShoPho5S |
| Reaction Pressure | Ambient |
| Reaction Temperature | Room Temperature |
| Catalyst Loading Capacity | User-Defined |
| Light Source | Interchangeable High-Efficiency LED Modules (365–950 nm, including 254/280/305/330 nm and customizable composite spectra) |
| Light Power per Position | 0–12 W, independently adjustable in fine steps |
| Light Source Lifetime | >10,000 h |
| Illumination Architecture | Patented dual-lens collimated transmission optics |
| Cooling Method | Integrated high-flow axial fans + high-thermal-conductivity aluminum chassis |
| Stirring Speed Range | 50–2000 rpm, bidirectional, with timer/countdown |
| Reaction Vessel Compatibility | Single-hole (Φ22.5 mm inner / Φ28 mm outer) or dual-hole (2 × Φ16.5 mm) |
| Expandability | Modular design supports upgrade to 10-position configuration |
| Brand | ShoLyn |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ShoPhoC-6 |
| Price | USD 9,000 (FOB Shanghai) |
| Temperature Range | 5–45 °C |
| Temperature Control Accuracy | ±3 °C |
| Reaction Positions | 6 |
| Reaction Vessel Capacity | 8–50 mL |
| Light Source Wavelength Range | 365–950 nm (±5 nm bandwidth) |
| LED Power Output | 0–18 W per position (independently adjustable) |
| Stirring Speed | 100–1500 RPM (stepwise, magnetic coupling) |
| Cooling Method | Integrated miniature air-compressor-based active cooling |
| Power Input | 220 V / 50 Hz |
| Light Port Configurations | Single-bore (Φ22.5 mm or Φ27.5 mm) or dual-bore (2 × Φ16.5 mm) |
| Light Source Interface | Plug-and-play modular LED modules |
| Optional Expansion | Dual-bore configuration enables up to 12 simultaneous irradiation zones |
| Brand | ShoLyn |
|---|---|
| Origin | Shanghai, China |
| Model | ShoPhoS |
| Reaction Stations | 1 |
| Reaction Vessel Capacity | 8–50 mL (compatible with 10–25 mL Schlenk tubes or 15 mL flat-bottom vials) |
| Temperature Range | 55–70°C (active cooling required for sub-ambient operation) |
| Light Source Wavelength Options | 254, 280, 305, 330, 365, 395, 420, 450 nm, or 6500 K white light (custom composite wavelengths available) |
| Power Supply | 7.5 W AC/DC adapter |
| Housing Material | High-thermal-conductivity aluminum alloy |
| Optical Design | Dual-lens collimated transmissive illumination module |
| Optional Accessories | ShoPhoS-Jacket glass thermostatic jacket |
| Brand | Sineo |
|---|---|
| Model | MAS-II Plus |
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Power Supply | 220–240 VAC, 50/60 Hz, 9 A |
| Microwave Frequency | 2450 MHz |
| Output Power | 0–1000 W (PID-controlled, programmable ramping) |
| Cavity Material | 316L stainless steel with multi-layer PTFE coating |
| Cavity Volume | Large-capacity industrial-grade cavity |
| Temperature Sensing | Dual-channel DTD system with IR (0–300 °C) and Pt100 RTD (0–300 °C) |
| Stirring | Integrated magnetic stirrer (30–1000 rpm) + digital paddle-type mechanical stirrer (30–1700 rpm) |
| Reaction Vessels | Standard set covering 50–1000 mL with reflux, condensation, and reagent addition accessories |
| Onboard Display | 7″ color TFT-LCD with real-time video feed from integrated cavity camera |
| Preloaded Methods | 50 editable and storable reaction protocols |
| Dimensions (W×D×H) | 450 × 510 × 510 mm |
| Operating Environment | 0–40 °C, 15–80 % RH |
| Brand | Sineo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | UWave-2000 |
| Temperature Range | 0–300 °C (atmospheric), 0–230 °C (pressurized) |
| Pressure Range | 0–2 MPa (rated), 0–5 MPa (sensing) |
| Microwave Power Output | 0–1000 W (PID-controlled, continuous non-pulsed) |
| Magnetron Frequency | 2450 MHz |
| Ultrasonic Power | 0–800 W |
| Ultrasonic Frequency | 28 kHz (auto-sweep & frequency-locking) |
| UV Source | LED, 0–100 W adjustable, peak wavelength 365 nm |
| Reaction Volume | up to 2000 mL (atmospheric), up to 500 mL (pressurized) |
| Safety Overpressure Release | Intelligent pressure control with real-time monitoring and automatic venting |
| External Vessel Material | Aerospace-grade carbon-fiber composite (Xtra Fiber™) with full PFA coating, burst strength ≥70 MPa, thermal resistance up to 600 °C |
| Cavity | 316L stainless steel with multi-layer PFA anti-corrosion coating |
| Cooling | 3-speed variable fan, 3 m³/min airflow |
| Control Interface | 7-inch color touchscreen (Windows-based OS), USB connectivity, remote PC control supported |
| Video Monitoring | Integrated HD color imaging system with real-time display and recording capability |
| Stirring Options | Digital constant-speed mechanical stirrer (30–1600 rpm, bidirectional, torque 300 N·m) + magnetic stirrer (0–800 rpm) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | SpinChem |
|---|---|
| Origin | Sweden |
| Model | MagRBR |
| Construction Material | Stainless Steel |
| Operating Pressure | Medium Pressure |
| Working Volume | 5–100 mL |
| Vacuum Range | 10–40 MPa (upon consultation) |
| Mesh Size of Cartridge | 44 µm |
| Cartridge Volume | 0.5 mL |
| Stirring Speed Range | 100–2000 rpm |
| Temperature Range (Stirrer) | −20 to +50 °C |
| Temperature Range (Control Unit) | 0 to +40 °C |
| Power Supply | 100–240 V, 50/60 Hz |