Tribological Tester
Filter
Showing 91–120 of 122 results
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 5750 |
| Test Stroke Options | 0.5", 1.0", 2.0", 3.0", 4.0" |
| Cycle Speed Options | 2, 15, 25, 40, 60 cycles/min |
| Applied Load Range | 350–1,600 g |
| Safety Certification | CE Marked |
| Power Supply | 115 V / 230 V AC |
| Instrument Type | Linear Tribological Tester |
| Sample Mounting | Adjustable Fixture Platform for Flat, Concave, and Irregular Surfaces |
| Abrader Options | Pencil-Eraser–Style Abrading Tips (Standard & Custom Materials) |
| Compliance | Designed to Support ASTM D3884, D4060, D6686 |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 5750 |
| Compliance | ASTM D6279, ASTM D2197, ASTM D5178, ASTM F1319, ISO 105-X12, ISO 9352, ISO 5470-1, EN ISO 2677-010, AATCC Method 8, JIS K7204, DIN 53754 |
| Load Range | 250 g (standard), configurable with optional weights |
| Stroke Length | Adjustable linear travel |
| Speed | Programmable reciprocating motion |
| Sample Mounting | Flat or contoured surfaces via floating stylus mechanism |
| Abrasive Media Compatibility | CS-10F rubber eraser tips, H-18 silicon carbide abrasive points, S-14 polishing papers, and custom media per application requirement |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | Taber 5900 |
| Instrument Type | Reciprocating Wear and Abrasion Tester |
| Maximum Applied Load | 1–24 N |
| Load Resolution | 1 mN |
| Maximum Operating Temperature | 50 °C |
| Reciprocating Stroke Length | 6–155 mm |
| Reciprocating Frequency | 3–75 cycles/min |
| Adjustable Test Arm Height | up to 130 mm |
| Compliance Standards | ASTM F2495, ISO 1518, GME 60248, GME 60368, GMW 14125 |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 6160 |
| Compliance | ASTM F735, ARCA AR-C STP 5.2.5 |
| Stroke Length Options | 1", 2", 3", or 4" |
| Oscillation Frequency | 100–200 cycles/min |
| Sample Height Exposure | ≤1 mm |
| Compatible Abrasives | Quartz sand, aluminum oxide, silicon carbide, glass beads |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 710 |
| Actuation | Pneumatic |
| Number of Test Arms | 5 |
| Normal Force Range | 2 N to 25 N (standard weights: 2, 3, 4, 5, 6, 7, 10, 15, 20 N |
| optional | 8, 13, 18, 25 N) |
| Indenter Options | Spherical tungsten carbide tips, Ø1.0 mm and Ø7.0 mm |
| Sample Thickness Limit | ≤22 mm |
| Sample Dimensions (recommended) | 125 mm × 300 mm |
| Traverse Speed Control | Adjustable via regulated air pressure |
| Timing Resolution | 0.01 s |
| Compliance | ASTM D7027, ISO 20566, SAE J2527, GMW 14698, Ford BN 108-13, Chrysler LP-463DD-18-01, Nissan NES M0159 |
| Brand | TABER |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Load | 1000 gf |
| Load Resolution | 0.1 gf |
| Operating Temperature | Ambient |
| Rotational Speed | 60 or 72 rpm (user-selectable) |
| Power Supply | 115/230 V, 50/60 Hz |
| Vacuum System | Integrated dust collector with adjustable nozzle height and 50–100% suction power control |
| Load Adjustment | Counterbalanced arm (250 g base load) |
| Touchscreen Interface | Integrated multilingual HMI with parameter storage for multiple user profiles |
| Reface Mode | Automatic wheel surface conditioning prior to test initiation |
| Compliance | ISO 9001 certified |
| Standard Fixtures Included | SH-125 specimen holder, SH-101 retaining ring, T25 star driver, S-12 long-handled brush, integrated vacuum unit with Y-connector |
| Brand | Taber |
|---|---|
| Origin | USA |
| Model | 5155 |
| Compliance | ASTM D4060, ASTM F510, ISO 7784-2, BS 3900-E15 |
| Sample Rotation Speed | 60 rpm (standard), adjustable via gear-driven mechanism |
| Load Options | 250 g, 500 g, 1000 g (standard weights) |
| Vacuum Extraction | Integrated high-efficiency particulate capture system (HEPA-filtered) |
| Test Duration Control | Digital timer with 0.1–999.9 min resolution |
| Footprint | 457 mm × 406 mm × 432 mm (W × D × H) |
| Weight | 27 kg |
| Brand | HENGYU |
|---|---|
| Origin | Tianjin, China |
| Model | HY-768-1 |
| Load Options | 250 g, 500 g, 1000 g |
| Rotational Speed | 60–72 rpm (infinitely variable) |
| Dimensions (L×W×H) | 52 × 30 × 42 cm |
| Weight | 40 kg |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Operating Environment | 10–35 °C, 10–80 % RH |
| Compliance Standards | ASTM D3884, ASTM D1175, ASTM D4060, ASTM D1044, TAPPI T476, ISO 9352, ISO 5470-1, JIS K7204, JIS A1453, JIS K6902, JIS L1096, JIS K6964, DIN 52347, DIN 53109, DIN 53754, DIN 53799, QB/T 2726, QB/T 2703, QB/T 16799, FZ/T 01128, Adidas GE22 |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JM-IV |
| Pricing | Available Upon Request |
| Rotational Speed | 60 ± 2 rpm |
| Sample Holder Diameter | 100 mm × Thickness 8 mm × Height 3 mm |
| Standard Load Weights | 500 g, 750 g |
| Sandwheel Balancing Weights | 20 g (shaft-mounted), 20 g, 10 g, 5 g, 2 g, 1 g |
| Reference Glass Disc | 100 × 8 × 3 mm |
| Drive Motor | 25 W, 220 V, 4-pole |
| Abrasive Wheels | 50 × 12 mm, Grade 100 & 120 |
| Counter Display | 4-digit LED (0–9999) |
| Wheel Truing Motor | 40 W, 220 V, 2850 rpm |
| Vacuum System | VW-80G, Adjustable Airflow |
| Main Unit Dimensions (L×W×H) | 360 × 240 × 220 mm |
| Truing Unit Dimensions | 300 × 180 × 180 mm |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TRF-1000/5-H |
| Load Range | 1–10 kN (lever ratio 1:30) |
| Load Accuracy | ±1% of indicated value |
| Rotational Speed | 0–1500 rpm (±3%, 50 Hz) |
| Max Test Temperature | 200 °C |
| Temp. Stability | ±2 °C |
| Heating Power | 480 W (dual 240 W elements) |
| Specimen | Ø60 × 15 mm disc |
| Steel Balls | Ø3/8 inch (3 pcs per test) |
| Vibration Detection Range | 0.03–3 G, 5 Hz–10 kHz |
| Counter Resolution | 9-digit cumulative rotation count |
| Cooling Water Requirement | 10 L/min at ≤0.2 MPa, inlet temp ≤30 °C |
| Net Weight | ~1200 kg (excl. dead weights) |
| Power Supply | 3P AC 380 V, 50 Hz, 30 A |
| Brand | JHT (Yi Cheng Heng Da) |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | TIMKEN OK |
| Price Range | USD 70,000 – 140,000 |
| Instrument Type | Boundary Lubrication Load Capacity Tester |
| Maximum Friction Force | 20 N |
| Friction Force Resolution | 0.4 mN |
| Maximum Test Temperature | 1000 °C |
| Standards Compliance | ASTM D2509, ASTM D2782, IP 240, IP 326, JIS K2220, JIS K2519 |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GV Cat |
| Price Range | USD 14,000 – 70,000 |
| Instrument Type | Specialty Tribological Tester for Canned Packaging |
| Max Friction Force | Not Specified |
| Friction Force Resolution | mN |
| Oscillation Frequency | 0–2.5 Hz |
| Stroke Length | 0.5–2 in (12.7–50.8 mm) |
| Test Duration | 0–24 h |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | CAT |
| Stroke Length | 12.7–50.8 mm (0.5–2 in) |
| Frequency Range | 0–2.5 Hz |
| Top Cylinder Pressure | 0–6 bar (0–87 psi) |
| Side Cylinder Pressure | 0–6 bar (0–87 psi) |
| Compatible Can Volume | 150–1000 mL |
| Minimum/Maximum Can Diameter | 53–84 mm |
| Minimum/Maximum Can Height | 88–205 mm |
| Operating Temperature | 0–50 °C (32–122 °F) |
| Operating Humidity | 0–90 % RH (non-condensing) |
| Power Supply | 100–240 VAC, 50–60 Hz |
| Air Supply | 8 bar ±20 % |
| Sound Level | <70 dB(A) |
| Weight | 125 kg (276 lb) |
| Dimensions | 1050 × 790 × 760 mm (41.3 × 31.1 × 29.9 in) |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | TRCA7-IBB |
| Quotation | Upon Request |
| Belt Travel Speed | 2670 mm/min |
| Cycle Length | 157 mm/cycle |
| Rotational Speed | 16 rpm |
| Power Consumption | 8 W |
| Test Loads | 55 g / 175 g / 275 g |
| Supply Voltage | AC 220 V, 50/60 Hz |
| Brand | VMI |
|---|---|
| Origin | Netherlands |
| Model | LAT-100 |
| Instrument Type | Multi-Functional Tribological Tester |
| Normal Load Range (Fz) | 10–140 N |
| Lateral Force Range (Fy) | −120 to +120 N |
| Friction Force Range (Fx) | 5–100 N |
| Speed Range (Low) | 0.002–2 km/h |
| Speed Range (High) | 2–100 km/h |
| Slip Angle Range | −45° to +45° |
| Mass Measurement Range | 220 g |
| Surface Temperature Range | −18°C to +150°C |
| Water Temperature Range | 1°C to 80°C |
| Cryo Temperature Range (with optional Kryo module) | −30°C to +80°C |
| Abrasion Disc Diameter | 350 mm |
| Abrasion Disc Thickness | 25 mm |
| Disc Materials | Al₂O₃ (EKW 60, EKW 180), SGG Glass |
| Dual-Sided Discs | Yes |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | XM-860 |
| Price | Upon Request |
| Stroke Range | 0–80 mm |
| Max Load Capacity | 5 kg |
| Display | Digital (6-digit counter, 0–999999) |
| Applied Load | 80–1000 g |
| Standard Weights | 10, 20, 50, 100, 200, 300, 500 g (2 sets included) |
| Abrasion Speed | 10–80 rpm |
| Test Media | Eraser, cotton cloth, alcohol-saturated swab, pencil tip |
| Net Weight | ~30 kg |
| Power Supply | 1-phase AC 220 V, 1 A |
| Power Consumption | ~150 W |
| Accessories | Alcohol applicator head, pencil abrasion head, eraser head (1 each), alcohol bottle holder, silicone alcohol delivery tubing, power cord |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.101 |
| Compliance Standards | JIS A1453, JIS K5400, JIS K5600-5-8/9, JIS K5665, JIS K6264-2, JIS K6404-22, JIS K6902, JIS K7204, JIS L1018, JIS L1085, JIS L1096, ASTM D1044, ASTM D1175, TAPPI T476, JAS, JASO M403, ISO 4649, ISO 5470-1, ISO 7784-1/2, ISO 9352 |
| Configuration Options | Standard (No.101), HS variant with integrated suction airflow metering, K variant for TABER abrasive wheels |
| Application Scope | Flat-sheet polymeric, elastomeric, coated, and composite materials |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.127 |
| Applicable Standard | JIS C 3005 |
| Test Principle | Rotating abrasive disk with controlled load and vertical suspension geometry |
| Sample Mounting | Fixed at center of rotating disk, free-hanging opposite end with calibrated dead-weight loading |
| Disk Rotation Speed | Adjustable (standard test speed per JIS C 3005) |
| Load Range | Standardized weights for cable tension control (e.g., 500 g, 1000 g, 2000 g) |
| Vertical Drop Distance | ~300 mm from disk center to clamping point |
| Compliance | Designed for JIS C 3005 conformance |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.151 |
| Standard Compliance | JIS K6264-2, ISO 4649, DIN 53516 |
| Test Specimen | Disc-shaped, φ16.0 ± 0.2 mm diameter, 6–10 mm thickness |
| Drum Diameter | φ150 mm, Length: 460 mm |
| Drum Rotational Speed | 40 ± 1 rpm |
| Specimen Traverse Speed | 2.8 mm/s |
| Applied Load | 10.0 ± 0.2 N or 5.0 ± 0.1 N |
| Abrasive Cloth Width | ≥400 mm, Material: Aluminum Oxide, Grit Size: P60 |
| Power Supply | AC 100 V, Single-phase, 10 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 750 × 430 × 430 mm |
| Weight | Approx. 52 kg |
| Optional | Low-Temperature Chamber Integration |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.151-OV |
| Standards | JIS K6264-2, ISO 4649, DIN 53516 |
| Drum Diameter | φ150 mm |
| Drum Length | 450 mm |
| Rotational Speed | 10–100 rpm (standard: 40 ± 1 rpm) |
| Specimen Feed Rate | 1.5–15 mm/s (standard: 2.8 mm/s) |
| Applied Load | 5.0 ± 0.1 N or 10.0 ± 0.2 N |
| Specimen Dimensions | φ16.0 ± 0.2 mm × 6–10 mm |
| Abrasive Belt Width | ≥400 mm |
| Abrasive Material | Aluminum Oxide |
| Grit Size | P60 |
| Max Oven Temperature | 100 °C |
| Power Supply | AC 200 V, 3-phase, 20 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈1130 × 920 × 745 mm |
| Weight | ≈255 kg |
| Accessories | Dust Extraction Unit, Specimen Alignment Gauge, Certified Reference Specimen (1 pc), Metallic Calibration Specimens (2 pcs), Punching Tool for Specimen Preparation |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.208 |
| Standards | JIS C 3406, JASO D 611, ISO 6722 |
| Specimen Length | 900 mm (JIS) / 1000 mm (JASO/ISO) |
| Indenter Tip Radius | R114 mm |
| Initial Load | 450 g / 0.63 ± 0.05 N |
| Adjustable Load Range | 50–1500 g |
| Conductor Support Shaft Diameter | φ7 mm (JIS) / φ6.9 mm (JASO/ISO) |
| Abrasive Tape Material | Type A, Grit #J180, Spacing: 150 mm (JIS/JASO) / 75 mm (ISO) |
| Contact Width | 10 mm |
| Tape Traverse Speed | 1500 mm/min (±75 mm/min for JASO/ISO) |
| Specimen Rotation Angles | 0°, 90°, 180°, 270° (JASO/ISO only) |
| Counter | 6-digit presettable digital counter |
| Power Supply | AC 100 V, 1-phase, 5 A, 50/60 Hz |
| Host Dimensions/Weight | ≈ W620 × D400 × H510 mm / ≈ 50 kg |
| Control Panel | ≈ W200 × D420 × H315 mm / ≈ 10 kg |
| Total System (incl. LT base) | ≈ W620 × D300 × H500 mm / ≈ 70 kg |
| Included | 5 abrasive tapes |
| Optional | Safety guard |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.210 |
| Instrument Type | Reciprocating Tribological Tester |
| Standard Compliance | NEMA C9.5, JASO E 402, ISO 6722 |
| Stroke Distance | 10 mm (NEMA) / 15.5 ± 1 mm (ISO/JASO) |
| Reciprocating Frequency | 60 cycles/min (NEMA) / 55 ± 5 cycles/min (ISO/JASO) |
| Load Range | 2–10 N (adjustable |
| Abrading Tip Diameter | φ0.4 mm (NEMA) / φ0.45 ± 0.01 mm (ISO/JASO) |
| Specimen Holder Spacing | 71 mm (center-to-center |
| Rotation Angles | 0°, 120°, 240° (NEMA) / 0°, 90°, 180°, 270° (ISO/JASO) |
| Counter | 6-digit presettable digital counter |
| Safety Enclosure | Integrated polycarbonate shield |
| Power Supply | AC 100 V, single-phase, 3 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈ 480 × 447 × 600 mm |
| Weight | ≈ 33 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.215 |
| Standard Compliance | JIS C 3003, IEC 60172, IEC 60851, NEMA C9.5 |
| Scratching Distance | 100 mm |
| Scratching Speed | 400 ± 40 mm/min |
| Load Range | 100 gf to 3.2 kgf (initial) |
| Piano Wire Diameter | φ0.23 ± 0.01 mm |
| Specimen Rotation Angles | 0°, 120°, 240° (optional) |
| Safety Enclosure | Integrated |
| Power Supply | AC 100 V, Single-phase, 5 A, 50/60 Hz |
| Dimensions (W×D×H) | Approx. 560 × 470 × 490 mm |
| Weight | Approx. 45 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.271 |
| Standard Compliance | ASTM D1630 |
| Test Principle | Rotating Drum Abrasion with Standardized Grit Paper |
| Load Application | Fixed Vertical Deadweight Load |
| Specimen Thickness Reference Point | 2.54 mm (0.1 in) |
| Primary Application Domain | Footwear Sole Materials, Vulcanized & Thermoplastic Elastomers |
| Regulatory Context | Supports ASTM-D1630–compliant QC/QA and GLP-aligned wear resistance reporting |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.275 |
| Compliance | JIS K6264-2, ISO 4649 |
| Test Principle | Rotating abrasive wheel with vertical axis, dual-specimen horizontal mounting under controlled load |
| Application Scope | Vulcanized rubber, thermoplastic elastomers (TPE), tire treads, footwear outsoles |
| Load Range | Standard 26.7 N (adjustable per standard requirements) |
| Specimen Dimensions | 25 mm × 25 mm × 6 mm (typical) |
| Wheel Rotation Speed | 76 ± 2 rpm |
| Abrasion Distance | 40 m (standard cycle) |
| Unit of Result | mm³ loss volume |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.283 |
| Instrument Type | End-Face Tribological Tester |
| Test Standard | JIS K 7218 |
| Specimen Geometry | Flat plate (30 × 30 × 2–5 mm), Disc (φ40 × 2–5 mm), Hollow Cylinder (OD φ25.6 mm, ID φ20 mm, L 15 mm) |
| Applied Load Range | 50–500 N (1 N resolution, servo motor + ball screw actuation) |
| Max Operating Temperature | 130 °C |
| Friction Torque Measurement | Up to 200 N·cm (load cell-based) |
| Displacement Range | 32 mm (0.01 mm resolution) |
| Sliding Speed | 0.2–200 cm/s (JIS A-spec: 50 ± 2.5 cm/s) |
| Optional Rotational Speed | 10–1,500 rpm |
| Environmental Options | Oil bath, water bath |
| Power Supply | AC 100 V, 1φ, 15 A, 50/60 Hz |
| Dimensions (W×D×H) | ≈ 810 × 900 × 1560 mm |
| Weight | ≈ 267 kg |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.541 |
| Applicable Standards | JIS A 1452, JIS A 5423, JIS K 5400 (H8503), JIS K 6791 (H8682-3), ASTM D968 |
| Test Principle | Gravitational sand-flow abrasion under fixed angle and height |
| Sample Mounting Angle | 45° |
| Sand Delivery | Free-fall from calibrated hopper |
| Endpoint Detection | Visual exposure of substrate through coating |
| Measurement Output | Time to failure (s) and cumulative sand mass (g) |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.650 |
| Application | Golf club head abrasion resistance evaluation under controlled reciprocating motion |
| Drive Type | Electric motor-driven linear reciprocation |
| Load Application | Adjustable vertical dead-weight or pneumatic loading system (typical range: 0.5–10 N) |
| Stroke Length | Adjustable (e.g., 5–50 mm) |
| Reciprocating Frequency | 10–120 cycles/min |
| Test Duration Control | Programmable timer (0–9999 min) |
| Sample Mounting | Custom fixture for golf club head geometry (incl. hosel clamping and face-angle alignment) |
| Compliance | Designed in accordance with ISO 7148-1, ASTM D5963, and JIS K 6264-2 for rubber and coated surface abrasion testing |
| Brand | Yasuda |
|---|---|
| Origin | Japan |
| Model | No.650-F |
| Test Motion | Reciprocating or Unidirectional |
| Load Application | Counterweight-based Dead-Weight Loading |
| Friction Force Measurement | Static and Kinetic Friction Separately |
| Sample Compatibility | Rigid and Semi-Rigid Flat Specimens (e.g., Plastics, Glass, Polymer Films) |
| Software | Dedicated Data Acquisition and Post-Processing Suite |
| Compliance Context | Designed for ASTM D1894, ISO 8295, JIS K 7124-1, and internal QC/QA protocols requiring traceable friction coefficient reporting |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-3315T1 |
| Counting Range | 0–999,999 cycles |
| Auto-Stop Function | Yes |
| Center-to-Center Distance Between Abrading Wheels | 63.5 mm |
| Distance from Abrading Wheel Center to Specimen Plate Center | 38 mm |
| Applied Loads | 250 g, 500 g, 1000 g (user-selectable) |
| Abrasive Wheel Specification | User-defined (compliant with ASTM D4060, JIS K7350) |
| Rotational Speed | 1–100 RPM (factory default: 60 RPM) |
| Dimensions (W×D×H) | 550 × 380 × 470 mm |
| Net Weight | ~30 kg |
| Power Supply | 220 V, 50/60 Hz |