- All
- Favorite
- Popular
- Most rated
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | XSTRESS 3000 |
| Type | Portable X-ray Diffraction (XRD)-Based Residual Stress Analyzer |
| Measurement Geometry | Modified ψ-tilt (symmetrical side-inclination) |
| Detector | Dual 512-channel solid-state linear imaging detector |
| Standard ψ-angle range | –45° to +45° |
| Optional extended ψ-range | –45° to +60° |
| Φ-rotation | Optional |
| Motion control | Computer-driven high-precision DC servo motors |
| Cooling | Integrated closed-loop water cooling system with heat exchanger and recirculating chiller |
| Radiation safety | Fully compliant with IEC 61010-1, IEC 62471, and EN 61331-1 for industrial X-ray equipment |
| Regulatory status | CE-marked, Class 1 radiation device under EU Directive 2013/59/Euratom |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CamScan |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) Analysis |
| Application | Non-destructive grinding burn and heat treatment defect detection on ferromagnetic components |
| Compliance | Designed per ISO 20086, ASTM E3154 (guideline), and aligned with automotive OEM process validation requirements (e.g., GM W31, Ford WHT-502, VW PV 2079) |
| Channel Configuration | Single- or multi-channel operation |
| Probe Options | Surface-contact transducers for cam lobes, journals, and complex geometries |
| Data Output | Real-time MBN amplitude & frequency spectrum, RMS voltage, peak-to-peak noise, and derivative-based burn index |
| Software Interface | CamView™ v5.2 with configurable pass/fail thresholds, statistical process control (SPC) export, and audit-trail logging compliant with FDA 21 CFR Part 11 (optional configuration) |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | DR45 |
| Type | Portable X-ray Diffraction (XRD)-Based Residual Stress Analyzer |
| Measurement Principle | Sin²ψ Method with Cr-Kα Radiation |
| Detector | High-Sensitivity Si-PIN or CCD (Configurable) |
| Angular Range | 2θ = 135°–165° (Optimized for Fe, Ni, Ti, Al, and Co-based alloys) |
| Sample Positioning | Motorized XYZ Stage with Manual Fine-Adjustment |
| Data Acquisition Time | < 90 s per measurement point (typical) |
| Stress Resolution | ≤ ±10 MPa (Fe-based steels, under optimal surface condition) |
| Depth Sensitivity | Surface-to-near-surface (~1–20 µm, dependent on material and radiation) |
| Compliance | ASTM E915-22, ISO 21913:2019, EN 15305:2021 |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Measurement Principle | Barkhausen Noise Analysis (BNA) |
| Diameter Range | 5–2000 mm |
| Module Range | 1–70 |
| Measurement Time per Tooth | 2–30 s (dependent on gear geometry and surface condition) |
| Motion Control | Computer-controlled precision DC servo motor with linear bearing–guided probe positioning |
| Compliance | ISO 286, ASTM E1447, EN 10002-1, applicable to ISO/IEC 17025 accredited labs |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | CrankScan |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) |
| Channel Options | Single-Channel or Multi-Channel |
| Typical Measurement Time | 6–8 seconds per measurement location |
| Probe Configurations | Interchangeable probes for journal surfaces, flanks, fillets, and complex geometries |
| Environmental Rating | Industrial-grade, operational in harsh workshop conditions |
| Compliance | Designed for ISO 10893-12, ASTM E3071, and EN 10327-compliant non-destructive evaluation workflows |
| Application Scope | Crankshafts, camshafts, bearings, gears, landing gear components, and other ferromagnetic case-hardened or induction-hardened steel parts |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | RollScan 250 |
| Application | Surface Burn & Microstructural Damage Detection in Ferrous & Nickel-Based Alloys |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) Analysis |
| Sensor Compatibility | Interchangeable MBN Probes (Surface, Encircling, Miniature) |
| Data Acquisition | Integrated DSP with Real-Time Signal Processing |
| Software Platform | ViewScan (Optional, Windows-based, ASTM E3147-21 Compliant) |
| Compliance | ISO 20986:2021, EN 10327, ASTM A938, NADCAP AC7114/3 |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | BearingScan400 |
| Type | Electromagnetic Acoustic Transducer (EMAT)-Based Non-Destructive Testing System for Grinding Burn and Heat Treatment Defect Detection |
| Compliance | ISO 17843, ASTM E3296 (under development), GLP-compliant data audit trail capability |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | xstress 3000 |
| Cooling | Air-cooled (no water cooling required) |
| Portability | Fully portable, field-deployable |
| Sample Handling | No size limitation, shape-independent measurement |
| Target Options | Multiple anode materials (Cr, Co, Fe, Cu, Mo) with quick-swap design |
| Goniometer | Integrated φ-rotation system for enhanced peak intensity and angular accuracy |
| Compliance | Designed for ASTM E915, ISO 21432, and EN 15305-compliant residual stress evaluation |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | XStress 3000 |
| Detector Type | Solid-State Position-Sensitive Proportional Counter (MOS Linear Imaging Detector) |
| Angular Resolution | 0.029°/pixel, 512-pixel linear array |
| 2θ Range | 110–171° (continuously adjustable) |
| Collimator Options | Ø0.5 mm, Ø0.8 mm, Ø1.0 mm, Ø2.0 mm, Ø5.0 mm |
| Goniometer Geometry | Modified y-geometry (side-inclination method) with dual symmetrically mounted detectors |
| Calibration | Fully automated, positional accuracy < 0.003 mm |
| Cooling System | Closed-loop recirculating chiller with active forced cooling |
| Power Consumption | 1 mW (detector only) |
| Safety | Integrated interlocks, radiation shielding per IEC 61010-1 and EN 62471 |
| Operating System | Windows-based control software |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | GearScan |
| Pricing | Available Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer | Stresstech Oy |
| Model | CrankScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Compliance | ISO 25178-2, ASTM E3069, EN 10327 |
| Portability | Handheld with Integrated Probe & Real-Time Display Unit |
| Data Output | Digital Signal Processing (DSP) with Threshold-Based Alarm Logic |
| Software Platform | Stresstech WinView v5.2 (FDA 21 CFR Part 11 Compliant Audit Trail, GLP/GMP-Ready Export Formats) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Rollscan 250 |
| Application | Non-destructive grinding burn and heat treatment damage detection |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) analysis |
| Compliance | ASTM E3167, ISO 20954, EN 10327 (applicable to MBN-based surface integrity assessment) |
| Sensor Interface | Plug-and-play modular connector |
| Motion Control | Motorized X/Z linear axes + A/T rotational axes |
| Software Platform | EasyGear v5.x (Windows-based, FDA 21 CFR Part 11 compliant audit trail optional) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Rollscan 250 |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Beijing, China |
| Manufacturer Status | Authorized Distributor |
| Country of Origin | China |
| Model | VWEP |
| Pricing | Upon Request |
| Output Voltage | 0–50 V |
| Output Current | 0–5 A |
| Polishing Duration | 0–99 s |
| Electrolyte Flow Control | Voltage-regulated (0–23 V) |
| Battery | Removable commercial Li-ion, 44.8 Ah, multi-output (24 V / 12 V / 5 V) |
| Runtime | Up to 10 h continuous operation |
| Polishing Head Diameter Options | 4 mm, 6 mm, 8 mm, 10 mm |
| Touchscreen Interface | Bilingual (English & Chinese) |
| Net Weight | 4.5 kg |
| Dimensions | 28 cm (L) × 23 cm (W) × 25 cm (H) |
| Stored Methods | 8 pre-programmed protocols |
| Electrolyte Management | Recirculating system with one-touch purge, fill, and drain |
| Safety Features | Low-input-voltage alarm, flow-activated solenoid valve, real-time voltage/current monitoring |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Camscan |
| Power Supply | 90–260 VAC, 49–61 Hz, single-phase |
| Max Inrush Current | 40 A @ 115 VAC / 80 A @ 230 VAC |
| Max Power Consumption (charging) | 150 VA |
| Nominal Power Consumption | ≤100 VA |
| Magnetization Frequency Range | 1.0–1000 Hz |
| Magnetization Voltage | 0–16 V |
| Signal Analysis Bandwidths | 10–70 kHz, 70–200 kHz, 200–450 kHz |
| Channel Configuration | Single-channel (expandable) |
| Probe Compatibility | Interchangeable electromagnetic transducers for cam lobes, journal surfaces, and curved geometries |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | XStress 3000 |
| Detector Configuration | Dual symmetric detectors |
| Goniometer Geometry | Modified y-tilt (side-inclination) |
| 2θ Range | 110°–171°, continuously adjustable |
| Collimator Options | Interchangeable, Ø0.5 mm to Ø5.0 mm |
| Calibration | Fully automated, positional accuracy < 0.003 mm |
| Cooling | Sealed recirculating chiller with active cooling |
| Weight | < 25 kg |
| Compliance | Designed for ASTM E915, ISO 21943, EN 15305, and USP <467> residual stress measurement protocols |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | Rollscan 250 |
| Detection Principle | Barkhausen Noise Analysis (BNA) |
| Channel Configuration | Single- or Multi-Channel |
| Software Platform | EasyGear v4.x |
| Compliance | ISO 28178, ASTM E3169, EN 10327 (applicable to surface integrity assessment), CE, RoHS |
| Operating Environment | Lab, QC Floor, and Production Line (IP54-rated portable unit) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GearScan 3 |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | XStress 3000 |
| Pricing | Upon Request |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Measurement Principle | Barkhausen Noise Analysis (BNA) |
| Diameter Range | 5–2000 mm |
| Module Range | 1–70 |
| Measurement Time per Tooth | 2–30 s (dependent on gear geometry and surface condition) |
| Motion Control | PC-controlled precision DC servo motor with linear bearing–guided probe |
| Compliance | Designed for ISO 11368, ASTM E1444/E1444M, and EN 10204 Type 3.1 documentation support |
| Software | GearScan Suite v5.x with audit trail, user access levels, and FDA 21 CFR Part 11–ready configuration options |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Rollscan 250 |
| Application | Non-destructive surface integrity assessment of ferromagnetic components |
| Measurement Principle | Magnetic Barkhausen Noise (MBN) analysis |
| Compliance | ASTM E3169, ISO 20914, EN 10327 (applicable to MBN-based surface condition evaluation) |
| Channel Configuration | Single- or multi-channel probe interface |
| Probe Options | Customizable sensor heads for shaft journals, bearing raceways, fillets, and complex geometries |
| Typical Measurement Time | < 5 seconds per location |
| Data Output | Quantitative MBN amplitude, RMS voltage, peak count rate, and frequency spectrum parameters |
| Brand | Stresstech Oy |
|---|---|
| Country of Origin | Finland |
| Model | GearScan |
| Detection Principle | Magnetic Barkhausen Noise (MBN) |
| Channel Configuration | Single- or Multi-Channel |
| Compliance | ISO 28080, ASTM E3071, EN 10326 |
| Software Platform | EasyGear v5.x with Audit Trail & User Access Control |
| Data Output | CSV, XML, PDF Reports |
| Sensor Interface | Plug-and-Play Quick-Connect (DIN 41612) |
| Motion Control | Motorized X/Z Linear Axes + A/T Rotational Axes |
| Safety | Interlocked Sliding Door, Emergency Stop, CE/UKCA Marked Cabinet |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | GearScan |
| Sensor Compatibility | Rollscan 250/300 ecosystem |
| Power | Rechargeable Li-ion battery (≥20 h continuous operation) |
| Data Storage | 100+ raw datasets with waveform |
| Software | ViewScan (optional standalone data acquisition & analysis) |
| Compliance | Designed for ASTM E3078, ISO 21906, and EN 10327-compliant magnetic Barkhausen noise (MBN) evaluation |
| Sample Geometry Support | External/inner diameters, raceways, shafts, cam lobes, landing gear components |
| Material Coverage | Ferritic steels, martensitic alloys, nickel-based superalloys, cobalt-chromium alloys |
| Measurement Principle | Non-destructive magnetic Barkhausen noise analysis (MBN) |
| Brand | Stresstech Oy |
|---|---|
| Origin | Finland |
| Model | Rollscan 250 |
| Application | Non-destructive surface burn and subsurface defect detection in ferrous and nickel-based alloys |
| Sensor Compatibility | Multi-sensor modular system (eddy current, magnetic Barkhausen noise, and incremental flux leakage) |
| Data Acquisition | Real-time digital signal processing with ViewScan software platform |
| Compliance | Designed for ISO/IEC 17025-compliant QA environments |
| Power & Interface | 24 V DC input |
| Operating Temperature | 5–40 °C |
| Enclosure Rating | IP54 (industrial-grade housing) |
Show next