Generic
Filter
Showing 1891–1920 of 5743 results
| Origin | South Korea |
|---|---|
| Supplier Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GX Bioreactor |
| Pricing | Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | GXH-3051 |
| Price | Upon Request |
| Measurement Range (CO₂) | 0–1000 ppm / 0–100% vol |
| Zero Drift | ≤ ±1% FS / 4 h |
| Span Drift | ≤ ±1% FS / 4 h |
| Linearity | ≤ ±1% FS |
| Repeatability | ≤ ±1% |
| Warm-up Time | 15 min |
| Weight | 1.5 kg |
| Display | Backlit LCD with Direct Concentration Readout |
| Gas Flow Control | Adjustable via Integrated Flow Regulator |
| Calibration Mode | Six-Port Manual Valve for Zero/Measurement Path Switching |
| Power | Dual Rechargeable Battery System with Low-Voltage Alert |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GYH-A |
| Quotation | Available Upon Request |
| Operating Temperature Range | Up to 800 °C (short-term max 1000 °C) |
| Heating Rate | 0–30 °C/min |
| Temperature Uniformity & Stability | ±2 °C at setpoint |
| Rated Power | 10 kW |
| Electrical Supply | 380 V, 50 Hz, 50 A |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GZRM-AIR-X11 |
| Pricing | Available Upon Request |
| Cooling Method | Air-Cooled Xenon Lamp |
| Lamp Power | 1100 W |
| Exposure Area | 560 cm² |
| Spectral Range for Irradiance Control | 300–800 nm |
| Irradiance Control Range | 250–765 W/m² |
| Black Standard Temperature Control & Monitoring | Yes |
| Chamber Air Temperature Control & Monitoring | Yes |
| Microprocessor-Based Control System with LCD Display | Yes |
| End-of-Test Trigger Options | Time or Cumulative Irradiance (kJ/m²) |
| Communication Interface | RS232 Serial Port |
| Alarm Notification System | Yes |
| Electrical Protection Features | Yes |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | GZX-9076MBE |
| Quotation | Available Upon Request |
| Power Supply | AC 220 V ±10%, 50 Hz ±2% |
| Temperature Range | Ambient +5 °C to 300 °C |
| Temperature Resolution | 1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±1 °C |
| Input Power | 1500 W |
| Interior Dimensions (W×D×H) | 450 × 400 × 450 mm |
| Exterior Dimensions (W×D×H) | 740 × 530 × 630 mm |
| Shelf Capacity | 2 adjustable stainless-steel shelves |
| Timer Range | 0–999 minutes |
| Key | Origin: Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | GZX-9146MBE |
| Power Supply | AC 220 V ±10%, 50 Hz ±2% |
| Temperature Range | Ambient +5 °C to 300 °C |
| Temperature Resolution | 1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±1 °C |
| Input Power | 2100 W |
| Interior Dimensions (W×D×H) | 550 × 500 × 550 mm |
| Exterior Dimensions (W×D×H) | 840 × 630 × 735 mm |
| Shelving | 3 adjustable stainless steel trays |
| Timer Range | 0–999 minutes |
| Construction | Cold-rolled steel exterior with electrostatic powder coating |
| Compliance | Designed per GB/T 5170.2–2017 (Electrical Equipment for Environmental Testing – Temperature Test Equipment), compatible with GLP laboratory workflows requiring traceable thermal stability and repeatable drying protocols |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | GZX-9246MBE |
| Pricing | Available Upon Request |
| Power Supply | AC 220 V ±10%, 50 Hz ±2% |
| Temperature Range | Ambient +5 °C to 300 °C |
| Temperature Resolution | 1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±1 °C |
| Input Power | 2700 W |
| Interior Dimensions (W×D×H) | 600 × 550 × 700 mm |
| Exterior Dimensions (W×D×H) | 890 × 670 × 935 mm |
| Shelving | 3 adjustable stainless steel shelves |
| Timer Range | 0–999 minutes |
| Key | Origin: Shanghai, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | GZY-I |
| Pricing | Upon Request |
| Power Supply | 220 V, 50 Hz |
| Glass Substrate Dimensions | 23 × 340 mm |
| Full-Stroke Duration | 6 / 12 / 24 h (selectable) |
| Full-Stroke Distance | 304.8 mm (12 in) |
| Needle Holder Capacity | Six holders, compatible with spherical or conical styluses ≤ Ø2 mm tip diameter |
| Overall Dimensions | 490 × 220 × 130 mm (L × W × H) |
| Net Weight | 8 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | H-7B |
| Pricing | Available Upon Request |
| Max Speed | 4000 rpm |
|---|---|
| Max RCF | 2200 ×g |
| Dimensions | 500×450×280 mm |
| Power | 200 W |
| Voltage | AC 220 V, 50 Hz |
| Weight | 20 kg |
| Application Class | Clinical Hematology & Immunohematology |
| Rotor Compatibility | SERO (RBC washing), HLS (lymphocyte separation), Blood Typing Card Rotors (24-well, 8-well, 6-well) |
| Compliance | Designed for CLIA-, CAP-, and ISO 15189-aligned workflows |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | H/T16MM |
| Price | ¥4,600 |
| Centrifugation Class | Biomacromolecules |
| Max Capacity | 6 × 50 mL |
| Max Speed | 16,500 rpm |
| Dimensions | 500 × 440 × 330 mm |
| Max RCF | 18,780 × g |
| Timer Range | 0–99 h 59 min |
| Programs Stored | 20 |
| Power | 350 W |
| Noise Level | ≤65 dB(A) |
| Weight | 35 kg |
| Voltage/Frequency | AC 220 V, 50 Hz |
| Rotor Options | Fixed-angle (e.g., 12 × 1.5/2.0 mL, 6 × 50 mL), Swing-bucket (e.g., 12 × 10 mL, 2 × 48-well microplate) |
| Origin | Hunan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | H/T18MM |
| Price | USD 850 (est.) |
| Centrifugation Class | Biomacromolecules |
| Max Capacity | 6 × 50 mL |
| Max Speed | 18,500 rpm |
| Dimensions | 500 × 440 × 330 mm |
| Max RCF | 23,610 × g |
| Timer Range | 0–99 h 59 min |
| Programs Stored | 20 |
| Power | 350 W |
| Noise Level | ≤65 dB(A) |
| Weight | 35 kg |
| Voltage/Frequency | AC 220 V, 50 Hz |
| Rotor Options | Fixed-angle (e.g., 6 × 50 mL, 24 × 1.5/2.0 mL), Horizontal (e.g., 12 × 10 mL, 2 × 48-well microplate) |
| Hydrogen Purity | 99.999% |
|---|---|
| Hydrogen Flow Rate | 0–500 mL/min |
| Hydrogen Output Pressure | 0.4 MPa |
| Air Flow Rate | 0–2000 mL/min |
| Air Output Pressure | 0.4 MPa |
| Power Consumption | 275 W |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | 28 kg |
| Model | HAC-I |
|---|---|
| Price | USD 4,500 approx.) |
| [Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | HAC-I |
| Power | 800 W |
| Sample Capacity | 50 positions (1.5–15 mL tubes) |
| Tube Holder Dimensions | Adjustable dual-layer rack |
| Temperature Range | Ambient to 90 °C |
| Temperature Accuracy | ±1 °C |
| Timer Range | 0–99 min |
| Heating Element | PTC ceramic |
| Gas Delivery | Regulated nitrogen flow with real-time digital display |
| Flow Control | Individual solenoid valves per channel |
| Detection Method | Optical fiber sensor for endpoint detection at 1 mL or 0.5 mL |
| Exhaust System | Integrated vapor extraction via flexible ducting |
| Gas Delivery Mode | Vortex-style tangential nitrogen stream (non-contact surface blowing) |
| Safety Features | Overheat protection, dry-run prevention, automatic shutdown on endpoint] |
| Origin | USA |
|---|---|
| Type | Imported |
| Model | 9010m |
| Detection Principle | Polarographic DO Sensor |
| DO Range | 0.00–20.00 ppm |
| Air Saturation Range | 0.0–200.0 % |
| Temperature Range | −6.0–46.0 °C |
| DO Resolution | 0.01 ppm |
| Saturation Resolution | 0.1 % |
| Temperature Resolution | 0.1 °C |
| DO Accuracy | ±0.5 % of full scale |
| Saturation Accuracy | ±0.5 % of full scale |
| Temperature Accuracy | ±0.3 °C ±1 digit |
| Pressure Compensation | Adjustable from 600–1100 mbar (default: 1013 mbar) |
| Salinity Compensation | Adjustable from 0.0–40.0 ppt (default: 0.0 ppt) |
| Data Storage | 50 measurement sets |
| Power Supply | 9 V alkaline battery |
| IP Rating | IP67 |
| Dimensions | 70 × 186 × 37 mm |
| Weight | 260 g (without battery) |
| Certifications | CE, RoHS, CMC |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Hach IL550 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity |
| Oxidation Method | UV/Persulfate Oxidation |
| Measurement Range | 0–50,000 ppm TOC |
| Accuracy | ±3% of reading |
| Resolution | 0.001 ppb |
| Detection Limit | 0.05 ppm |
| Repeatability | ≤3% RSD |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Online TOC Analyzer |
| Price Range | USD 42,000 – 70,000 |
| Instrument Type | Online TOC Monitoring System |
| Detection Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Oxidation Methods | UV/Persulfate, High-Temperature Combustion (680–900 °C), Ozone-Promoted Oxidation, Ultra-Pure UV Oxidation |
| Measurement Range | 0–50,000 ppm C |
| Accuracy | ±1% of reading |
| Resolution | 0.05 ppm C |
| Detection Limit | 0.05 ppm C |
| Repeatability | ±1% RSD |
| Sample Throughput | As low as 3 minutes per analysis (configuration-dependent) |
| Dimensions (H×W×D) | 575 × 556 × 612 mm |
| Weight | 60 kg |
| Power Supply | 220 VAC, 10 A |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Portable-200M |
| Price Range | USD 7,000–14,000 |
| Detection Principle | Anodic Stripping Voltammetry (ASV) + Spectrophotometric Colorimetry |
| Measured Elements | Cu, Cd, Pb, Zn, As, Hg, Tl, Mn, Sb, Ni (expandable) |
| ASV Detection Range | 0.1 µg/L to tens of mg/L |
| Colorimetric Range | 0.01–5 mg/L (for Cu, Cr(VI), Ni, Pb, Zn, Fe, Co, Mn) |
| Repeatability (RSD) | ≤2% (Cd at 50 µg/L) |
| Accuracy (Bias) | ≤±10% |
| LOD | ≤0.5 µg/L |
| Compliance | ASTM D3559, ISO 11969, EPA Method 7063 (ASV), EPA Method 7196A (Cr(VI)) |
| Origin | Sweden |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Vertex IV Ultrasonic Height and Distance Meter |
| Price | Upon Request |
| Dimensions | 80 × 50 × 30 mm |
| Weight | 160 g |
| Power Supply | 1 × 1.5 V AA alkaline battery |
| Current Consumption | 20 mA (standby), 150 mA (Bluetooth active) |
| Ultrasonic Frequency | 25 kHz |
| Operating Temperature | −15 °C to +45 °C |
| Wireless Communication | Bluetooth or IR |
| Distance Resolution | 0.01 m |
| Distance Accuracy | ±1% or better |
| Angular Range | −55° to +85° |
| Angular Resolution | 0.1° |
| Height Measurement Range | 0–999 m |
| Height Resolution | 0.1 m |
| 60° Transceiver Max Range | 30 m (100 ft) |
| 360° Transceiver Max Range | 20 m (60 ft) |
| Housing Material | Anodized aluminum |
| Unit System | Metric/Imperial selectable |
| Origin | Shandong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DW-86L626 |
| Quotation | Upon Request |
| Climate Class | N |
| Cooling Method | Direct Cool |
| Defrost Mode | Manual |
| Refrigerant | Eco-friendly Mixed HFC Blend |
| Noise Level | <50 dB(A) |
| Power Consumption | 1200 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Internal Temperature Range | -40 °C to -86 °C |
| Temperature Uniformity | ±6 °C |
| External Dimensions (W×D×H) | 1035 × 900 × 1980 mm |
| Internal Dimensions (W×D×H) | 760 × 630 × 1310 mm |
| Net Capacity | 626 L |
| Net Weight | 301 kg |
| Compressor Type | Hermetic Reciprocating (Dual Unit) |
| Compressor Power | 927 W per unit |
| Door Configuration | 1 Outer Foam-Insulated Door + 4 Independent Inner Foam Doors |
| Insulation | VIP Vacuum Insulation Panels + Zero-ODP Polyurethane Foam |
| Temperature Control | Microprocessor-Based Digital Controller with LED Display |
| Temperature Sensor | Precision Thermistor |
| Shelving | Adjustable, Load Capacity 50 kg per shelf |
| Casters | Equipped with Locking Swivel Casters |
| Monitoring Ports | 1 Access Port for External Probe or Data Logger |
| Alarm System | Comprehensive Audible/Visual Alarms (High Temp, Low Temp, Power Failure, Door Ajar, Filter Clog, Sensor Fault, Ambient Over-Temp, Low Battery, Voltage Fluctuation) |
| Regulatory Compliance | Registered Medical Device (China NMPA) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DW-60W156 |
| Pricing | Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | SFT-A3 |
| Pricing | Available Upon Request |
| Measurement Range | 0–1000 mN/m |
| Resolution | 0.01 mN/m |
| Accuracy | ±0.01 mN/m |
| Data Acquisition Rate | Up to 23 Hz |
| Zeroing | One-Touch Automatic Calibration |
| Operating System | 7-inch Full-Color WinCE Embedded Interface |
| Data Export | USB 2.0 Flash Drive Support |
| Peripheral Compatibility | External Mouse Supported |
| Stage Vertical Travel | 0–50 mm |
| Stage Repeatability | ±0.5 µm |
| Stage Speed Control | Programmable & Variable During Test |
| Actuation Interface | USB-Controlled Precision Lead Screw (Low-Noise, High-Stability) |
| Temperature Sensing Accuracy | ±0.01 °C |
| Temperature Readout | Software-Integrated, Independent Display |
| Test Methods | Wilhelmy Plate Method, du Noüy Ring Method |
| Automation Level | Fully Automated Surface/Interfacial Tension Measurement with Manual Override Mode |
| Liquid Level Detection | Real-Time Electronic Sensor-Based Meniscus Recognition |
| Data Management | On-Screen Real-Time Plotting, Local Database Storage, Historical Query, Export to Origin-Compatible Format (.opj/.txt) |
| Dimensions (L×W×H) | 450 × 350 × 580 mm |
| Weight | 20 kg |
| Power Supply | 220 V AC, 3 A |
| Key | Origin: Taiwan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | China (Domestically Assembled) |
| Model | VDP6800 |
| Instrument Type | Variable-Temperature Hall Effect Tester |
| Constant Current Source Range | 1 nA to 20 mA |
| Test Voltage Range | ±10 V |
| Mobility Range | 1–10⁷ cm²/(V·s) |
| Maximum Applied Voltage | 10 V |
| Resistivity Range | 10⁻⁵–10⁷ Ω·cm |
| Carrier Concentration Range | 10⁷–10²¹ cm⁻³ |
| Magnetic Field Options | 0.65 T or 1 T permanent magnet |
| Temperature Capability | Room temperature and liquid nitrogen (77 K) |
| Sample Holder | Spring-loaded Van der Pauw probe fixture (no sample patterning required) |
| Compatible Materials | Si, ZnO, SiGe, SiC, GaAs, InGaAs, InP, GaN (n-type and p-type) |
| Dimensions (W×D×H) | 260 × 220 × 180 mm |
| Weight | 6 kg |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C8800 |
| Pricing | Available Upon Request |
| Sensor Type | Frame-Transfer CCD |
| Resolution | 1000 × 1000 pixels |
| Pixel Size | 8 µm × 8 µm |
| Active Area | 8 mm × 8 mm |
| Pixel Clock Frequency | 40 MHz per channel |
| Frame Rate | 33 fps (full resolution, binning off) |
| Read Noise | 25 e⁻ rms |
| Full Well Capacity | 23,000 e⁻ |
| Dynamic Range | 920:1 (typical) |
| A/D Conversion | 12-bit |
| Exposure Time Range | 500 µs – 1 s (C8800-01C) |
| Contrast Enhancement | 1× to 5× (programmable) |
| Cooling Method | Forced-gas thermoelectric cooling (C8800-21C) |
| Operating Sensor Temperature | −20 °C (C8800-21C) |
| Dark Current | 25 e⁻/pixel/s (at −20 °C, C8800-21C) |
| Spectral Response | 400 nm – 1100 nm |
| Lens Interface | Vacuum-sealed lens mount (C8800-21C) |
| Mechanical Shutter | Not integrated |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | C9920 |
| Pricing | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CMOS Series |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CPG-100B-1000-P |
| Output Current | Up to 500 A (at 100 V supply, 5 ns pulse width, 300 pH parallel inductance) |
| Pulse Width | Fixed typ. 1–5 ns |
| Repetition Rate | Single-shot to 400 kHz |
| Timing Jitter | < 5 ps (additive) |
| Output Impedance (High-Current Driver Version) | 10–100 mΩ |
| Coupling | AC-coupled |
| RF Connector | Advanced SMA® |
| Trigger Input | 50 Ω terminated, TTL/CMOS compatible |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model Series | InGaAs |
| Frame Rate | 1031 fps (area array) to 7200 lines/s (linear array) |
| Spectral Range | 900–2550 nm |
| Spectral Response | SWIR (Short-Wave Infrared) |
| Cooling | Uncooled, Single-Stage TE, or Dual-Stage TE |
| Pixel Pitch | 25–50 µm |
| Pixel Count | 256–16384 |
| Active Area | 3.2 × 3.2 mm to 25.6 × 0.5 mm |
| Optical Interface | Binary optical element compatible |
| Platform Compatibility | Ground-based and airborne hyperspectral systems |
| Compliance | RoHS-compliant packaging, ISO 9001-certified manufacturing environment |
| Origin | UK |
|---|---|
| Distribution Model | Authorized Distributor |
| Import Status | Imported |
| Models | IRA-256, IRA-512 |
| Interface Options | USB 14-bit, PCI 12-bit |
| Pixel Count | 256 or 512 |
| Pixel Size | 50 µm × 500 µm |
| Pixel Pitch | 50 µm |
| Spectral Range | 800–1700 nm |
| Cooling Method | TE (Peltier) |
| Operating Chip Temperature | < +5 °C (at 24 °C ambient) |
| Full Well Capacity (typ.) | 5×10⁶ e⁻ (high-sensitivity mode), 130×10⁶ e⁻ (high-dynamic-range mode) |
| Read Noise (rms, typ.) | 800 e⁻ (HS), 10 k e⁻ (HDR) |
| Dark Current (rms, typ.) | 190 k e⁻/s (IRA-256), 182.2 k e⁻/s (IRA-512) |
| 1-s Dark Noise (rms, typ.) | 436 e⁻ (IRA-256), 426 e⁻ (IRA-512) |
| Integration Time | 0.01–10 s |
| Analog Output Range | 0–10 V |
| Frame Rate (real-time) | >20 spectra/s |
| Defective Pixel Count | ≤5 (non-adjacent) for IRA-512 |