MCL Think Nano
Filter
Showing 61–75 of 75 results
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-View® Series |
| Type | Motorized Translation Stage with Integrated Piezoelectric Nanopositioners |
| Travel (Micropositioning) | 25 mm per axis (X/Y) |
| Travel (Nanopositioning) | up to 300 µm per axis (X/Y/Z) |
| Micropositioner Step Size | 95 nm |
| Micropositioner Repeatability | 50 nm |
| Encoder Resolution (optional) | 20 nm |
| Nanopositioner Resolution | 0.2–0.6 nm (depending on range) |
| Closed-Loop Positioning Accuracy | Picometer-level (PicoQ® sensor technology) |
| Stiffness | 1.0 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max Horizontal Load | 0.5 kg |
| Body Materials | Aluminum, Invar, or Titanium |
| Controllers | Nano-Drive® (nanopositioning) + Micro-Drive™ (micropositioning), USB interface |
| Software Compatibility | LabVIEW-ready, includes native motion control routines |
| Microscope Compatibility | Olympus IX/IX2, Nikon TE2000/Ti, Leica DMI, Zeiss Axiovert/Axio Observer, MCL RM21™ Platform |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-YT500 |
| Motion Axis | Single-axis (X) |
| Travel Range | 500 µm |
| Resolution | 1.0 nm |
| Resonant Frequency | 150 Hz ±20% |
| Stiffness | 0.8 N/µm |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.1 kg |
| Guiding Mechanism | Monolithic Flexure |
| Sensor Technology | PicoQ® Absolute Position Sensing |
| Control Architecture | Closed-loop with Nano-Drive® Controller |
| Body Material | Aluminum |
| Cycle Life | >1,000,000 full-range cycles |
| Aperture | Central rectangular optical pass-through |
| Orientation Independence | Yes |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-Z Series |
| Product Type | Motorized Precision Translation Stage |
| Motion Axis | Single-Axis (Z) |
| Travel Range | 100 µm or 200 µm |
| Resolution | 0.2 nm (Nano-Z100) / 0.4 nm (Nano-Z200) |
| Resonant Frequency | 600 Hz ±20% (100 µm) / 450 Hz ±20% (200 µm) |
| Stiffness | 1.0 N/µm |
| Max Recommended Load (Horizontal) | 0.5 kg |
| Body Material | Aluminum or Invar |
| Control Mode | Closed-Loop with Integrated PicoQ® Position Sensing |
| Step Response Time | ≤4 ms (with Nano-Drive®85) |
| Aperture | 2.6" × 2.6" |
| Height | 0.8" |
| Software Compatibility | Nano-Control Suite, Third-Party LabVIEW/Python API Support |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-Z50HS |
| Motion Range | 50 µm |
| Resolution | 0.1 nm |
| Resonant Frequency | 1000 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Max. Horizontal Load | 200 g |
| Body Material | Aluminum |
| Controller | Nano-Drive®85 |
| Control Mode | Closed-loop with PicoQ® position sensing |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-ZL Series |
| Motion Range | 100 μm or 500 μm (Z-axis) |
| Position Resolution | 0.2 nm (Nano-ZL100) / 1 nm (Nano-ZL500) |
| Resonant Frequency | 250 Hz |
| Max. Horizontal Load | 0.5 kg |
| Body Material | Aluminum |
| Control | Closed-loop with integrated PicoQ® absolute position sensing |
| Software Compatibility | Nano-Drive® controller suite |
| Compliance | Designed for GLP-compliant optical microscopy workflows requiring traceable, reproducible Z-positioning |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-ZS Series |
| Product Type | Motorized Precision Translation Stage |
| Motion Axis | Single-Axis (Z) |
| Travel Range | 100 μm or 200 μm |
| Resolution | 0.2 nm (Nano-ZS100) / 0.4 nm (Nano-ZS200) |
| Resonant Frequency | 450 Hz (100 μm) / 250 Hz (200 μm) |
| Stiffness | 1.0 N/μm |
| Max Recommended Load (Horizontal) | 0.5 kg |
| Body Material | Aluminum or Invar |
| Control Mode | Closed-Loop |
| Sensor Technology | PicoQ® Absolute Position Sensing |
| Controller Compatibility | Nano-Drive® and Nano-Drive®85 |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nanopositioning and Micropositioning Accessories |
| Product Type | Motorized Translation Stage |
| Compatibility | Nano-BioS, Nano-LPS, Nano-Z500, Motorized MicroStage, Manual MicroStage-LT |
| Mounting Standards | RMS (Olympus/Zeiss/Leica), M25-0.75 (Nikon) |
| Rack Format | 2U (3.47 in height), Full-width & Half-width options |
| Control Interface | USB |
| Software | NanoControl & MicroControl (LabVIEW-based, Windows-compatible, free with USB-enabled systems) |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | OEM Nano-Drive® Series |
| Product Type | Motorized Translation Stage |
| Compliance | RoHS, CE (2004/108/EC, 2006/95/EC) |
| Power Input | 12 W @ 24 VDC |
| Amplifier Output Voltage Range | −20 V to +165 V |
| Continuous Power Output | 10 W |
| Max Continuous Drive Current | 50 mA |
| Feedback Sensor | PicoQ® capacitive position sensor |
| Control Loop | Proportional-Integral (PI) closed-loop servo |
| Analog Input | 0–10 V (configurable), BNC interface |
| Sensor Output | 0–10 V, BNC interface |
| USB Interface Option | 16-bit or 20-bit digital daughter board |
| Operating Temperature | 5–40 °C |
| Dimensions | 193.68 × 171.45 × 63.5 mm |
| Steady-State Power Consumption | <0.5 W |
| Input Impedance | 10 kΩ |
| Short-Circuit Protection | Yes |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | PZT1 / PZT2 / PZT3 / PZT4 |
| Actuator Type | Low-Voltage Multilayer Piezoelectric Actuator |
| Max. Displacement | 4.6–17.4 µm |
| Max. Driving Voltage | 150 VDC |
| Capacitance | 0.10–0.75 µF ±20% |
| Resonant Frequency | 69–276 kHz |
| Blocking Force | 200–850 N |
| Operating Temperature Range | −25 to +85 °C |
| Cross Section | 3.5×4.5 mm or 6.5×6.5 mm |
| Young’s Modulus | 4.4×10¹⁰ N/m² |
| Tensile Strength | 20–85 MPa |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | RM21™ Microscope Platform |
| Instrument Type | Inverted Fluorescence Microscope |
| Excitation Source | Metal Halide Lamp |
| Eyepiece Compatibility | Standard 23.2 mm or 30 mm Mounts |
| Objective Compatibility | Standard RMS or M25 Thread Mounts |
| Fluorescence Configuration | Epi-illumination (Reflected Light) |
| Illumination Flexibility | Compatible with Broadband, LED, and Laser Sources |
| Observation Geometry | Inverted Optical Layout |
| Z-Axis Travel | 50 mm (2 in) with 95 nm Step Resolution |
| XY Positioning | Manual or Motorized Micropositioner (Optional) |
| Encoder Option | Closed-Loop Encoders Available for X, Y, and Z Axes |
| Integration Ready | Fully Compatible with Nano-Cyte® 3D Stability System, Nano-LPS/Nano-LPQ Linear Positioners, Nano-OP/Nano-F Objective Positioners, and LCC-Focus™ Autofocus Modules |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | SPM-M Kit |
| Detection Noise | <0.15 nm RMS |
| Sample Size | <15 mm |
| XY Scan Range | 200 × 200 µm |
| Z Positioning | Nano-OP30 (closed-loop optional) |
| Controller | 3-Axis Nano-Drive® with PicoQ® sensors |
| Probe Options | Quartz tuning forks (5 included), Akiyama probe boards, tungsten tip etching compatibility |
| Software | AFMView™ with automated PLL control |
| Compliance | Designed for GLP/GMP-aligned research environments |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | TIRF Lock™ |
| Instrument Type | Inverted Fluorescence Microscope Add-on Module |
| Excitation Source | Metal Halide Lamp |
| Eyepiece | Standard |
| Objective | Standard |
| Fluorescence Configuration | Epi-Fluorescence |
| Compatible Light Sources | Any Illumination Source |
| Observation Head | Inverted |
| Wavelength Range | 400–1000 nm |
| Peak Responsivity | 0.4 A/W @ 635 nm, 0.67 A/W @ 900 nm |
| Recommended Input Beam Diameter | 300 µm – 1.5 mm |
| Sensor Active Area | 2.4 mm × 2.4 mm |
| Clear Aperture | 12.5 mm (0.5 inch) |
| Aperture Threading | SM05 (0.535-40) |
| Detector Head Mounting Thread | 8-32 or M4 |
| Base Mounting Thread | 1/4-20 or M6 (magnetic base & clamping fork included) |
| Detector Cable Length | 1.83 m (6 ft) |
| Power Supply | 90–260 V AC |
| Controller Dimensions | 212.7 mm × 88.9 mm × 304.8 mm (8.375″ × 3.5″ × 12″) |
| PC Interface | USB 2.0 |
| OS Compatibility | Windows XP Pro / Vista / 7 / 8 (32- or 64-bit) |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Tuning Forks |
| Center Frequency | 32.768 kHz |
| Oscillation Mode | Fundamental |
| Series Resistance (max.) | 30 kΩ |
| Tolerance (at 25 °C) | ±18 ppm |
| Operating Temperature Range | −10 °C to +60 °C |
| Frequency Stability Over Temperature | −0.038 ppm/°C |
| Drive Level | 10 µW |
| Shunt Capacitance (max.) | 1.7 pF |
| Motional Capacitance | 2.5 fF |
| Load Capacitance | 12.5 pF |
| Aging (max.) | ±3 ppm/year |
| Packaging | Pre-cleaned, “out-of-the-can” ready-to-mount configuration |
| Available Sizes | Medium and Large |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | MCL-MOTNZ |
| Pricing | Upon Request |
| Product Type | Motorized Translation Stage |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MCL-NSOM |
| Instrument Type | Materials-Focused NSOM System |
| Positioning Noise | X-Y ≤ 0.15 nm RMS, Z = 35 pm RMS |
| Typical Imaging Bandwidth | 625 Hz |
| Sample Dimensions | Ø ≤ 15 mm, Thickness ≤ 5 mm |
| Sample Stage Travel Range | Ø ≤ 15 mm, Thickness ≤ 5 mm |
| XY Micropositioner Range | 25 mm |
| Z Lens Micropositioner Range | 50 mm |
| Fiber XYZ Micropositioner Range | 25 mm |
| Micropositioner Step Size | 95 nm |
| Piezo Nanopositioner Range (XYZ) | 200 µm × 200 µm × 30 µm |
| Piezo Resolution | 0.4 nm (XY), 0.06 nm (Z) |
| Piezo Step Size | 0.2 nm (XY), 0.03 nm (Z) |
| Excitation Source | 635 nm, 5 mW laser diode with fiber coupling |
| Objective | 20× oil immersion, 0.4 NA, infinity-corrected |
| Detection | Avalanche photodiode (200–1000 nm, 1 mm active area) |
| Alignment Camera | 0.3 MP CMOS |
| Feedback Mode | Shear-force |
| NSOM Modes | Illumination, Collection, Illumination+Collection, Reflection, Reflection+Collection |
| Control Software | AFMView™ and LabVIEW™-based automation suite |
| Controller Interfaces | USB 2.0, 20-bit DAC/ADC, 4-channel TTL I/O |
| Operating System Compatibility | Windows Vista/7/8/10 |