MCL Think Nano
Filter
Showing 31–60 of 75 results
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-HS3M |
| Motion Range (XY) | 10 µm |
| Motion Range (Z) | 5 µm |
| Positioning Resolution | 0.01 nm |
| Resonant Frequency (X) | 1.6 kHz |
| Resonant Frequency (Y) | 1.5 kHz |
| Resonant Frequency (Z) | 13.5 kHz |
| Max. Horizontal Load | 0.1 kg |
| Max. Vertical Load | 0.1 kg |
| Body Material | Aluminum or Titanium |
| Position Noise | < 2 pm (all axes) |
| Control | Closed-loop with PicoQ® sensor technology |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-HSZ |
| Product Type | Motorized Translation Stage |
| Motion Axis | Single-axis (Z) |
| Positioning Technology | Closed-loop piezoelectric actuation with PicoQ® absolute position sensing |
| Travel Range (Z) | 10 µm |
| Resolution | 0.01 nm |
| Resonant Frequency | 7.5 kHz ±20% |
| Step Response Time | <1 ms |
| Maximum Scan Frequency (full amplitude) | 500 Hz |
| Stiffness | 12 N/µm |
| Max Recommended Load (horizontal/vertical) | 0.1 kg |
| Body Materials | Aluminum, Invar, or Titanium |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-LP Series |
| Motion Range (XYZ) | 100/200/300 µm |
| Resolution | 0.2/0.4/0.6 nm |
| Resonant Frequency (X) | 450/400/350 Hz ±20% |
| Resonant Frequency (Y) | 350/300/250 Hz ±20% |
| Resonant Frequency (Z) | 450/350/250 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max Load (Horizontal) | 0.5 kg |
| Max Load (Vertical) | 0.2 kg |
| Body Material | Aluminum (all), Invar or Titanium (Nano-LP100/Nano-LP200 only) |
| Control | Closed-loop with PicoQ® absolute position sensing |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-LPQ |
| Product Type | Motorized Translation Stage |
| Travel Range (X/Y/Z) | 75 × 75 × 50 µm |
| Resolution (X/Y/Z) | 0.2 / 0.2 / 0.1 nm |
| Resonant Frequencies (X/Y/Z) | 1000 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max. Horizontal Load | 100 g |
| Max. Vertical Load | 100 g |
| Body Material | Aluminum |
| Controller | Nano-Drive®85 |
| Position Sensing Technology | PicoQ® Absolute Closed-Loop |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-LPS Series |
| Motion Range (XYZ) | 100/200/300 µm |
| Resolution | 0.2/0.4/0.6 nm |
| Resonant Frequency (X/Y/Z) | 400/350/300 Hz (±20%) |
| Stiffness | 1.0 N/µm |
| Angular Deviation (Roll/Pitch/Yaw) | ≤1/≤1/≤3 µrad |
| Max Load (Horizontal/Vertical) | 0.5 kg / 0.2 kg |
| Body Material | Aluminum (all), Invar or Titanium (100/200 µm models only) |
| Control | Closed-loop with PicoQ® position sensors |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-LR200 |
| Motion Range (X) | 200 µm |
| Resolution | 0.4 nm |
| Resonant Frequency (no load) | 500 Hz ±20% |
| Resonant Frequency (100 g load) | 200 Hz ±20% |
| Stiffness | 0.2 N/µm |
| Angular Deviation (θ roll, θ pitch) | ≤0.3 µrad (typ.) |
| Angular Deviation (θ yaw) | ≤0.3 µrad (typ.) |
| Max. Horizontal Load | 0.5 kg |
| Max. Vertical Load | 0.2 kg |
| Body Material | Aluminum |
| Controller | Nano-Drive® |
| Out-of-Plane Motion | <5 nm over full range |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-M250 |
| Motion Range (XY) | 50 μm × 50 μm |
| Aperture | 0.5 inch |
| Control | Closed-loop |
| Resolution | 0.1 nm |
| Resonant Frequency (X) | 1.0 kHz ±20% |
| Resonant Frequency (Y) | 700 Hz ±20% |
| Stiffness | 1.0 N/μm |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Max Load (Horizontal) | 0.5 kg |
| Max Load (Vertical) | 0.2 kg |
| Body Material | Invar or Titanium |
| Vacuum Compatibility | Available for HV/UHV |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-M350 |
| Motion Axes | X, Y, Z |
| Travel Range | 50 μm (X), 50 μm (Y), 25 μm (Z) |
| Closed-Loop Resolution | 0.05 nm (25 μm range), 0.1 nm (50 μm range) |
| Resonant Frequency | 1 kHz (X), 700 Hz (Y & Z) |
| Stiffness | 1.0 N/μm |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Body Material | Aluminum/Titanium or Invar |
| Vacuum Compatibility | High Vacuum (Non-Bakeable) |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-M3Z |
| Product Type | Motorized Nanopositioning Stage |
| Motion Axes | Z, θX, θY |
| Center Aperture | 0.25" (6.35 mm) diameter |
| Height | 0.8" (20.3 mm) |
| Closed-Loop Control | Yes |
| Position Sensing Technology | PicoQ® capacitive sensors |
| Body Material Options | Aluminum or Invar |
| Z Range | 25 µm |
| θX / θY Range | ±1 mrad each |
| Z Resolution | 0.05 nm |
| θX / θY Resolution | 2 nrad each |
| Resonant Frequency | 700 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-Man5 |
| Motion Axes | X, Y, Z, θX, θY |
| Travel Range | 50 µm × 50 µm × 25 µm × 1 mrad × 1 mrad |
| Center Aperture | 6.35 mm (0.25") |
| Closed-Loop Control | Yes |
| Position Resolution | 0.1 nm (X,Y), 0.05 nm (Z), 2 nrad (θX,θY) |
| Resonant Frequency | 1 kHz (X), 700 Hz (Y,Z) |
| Stiffness | 1.0 N/µm |
| Max Load (Horizontal/Vertical) | 0.2 kg |
| Body Material | Aluminum/Titanium or Invar |
| Vacuum Compatibility | High Vacuum (Non-Bakeable) Option Available |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-Max50 |
| Motion Range (X/Y) | 50 μm × 50 μm |
| Resolution | 0.1 nm |
| Resonant Frequency (X) | 1.5 kHz ±20% |
| Resonant Frequency (Y) | 1.0 kHz ±20% |
| Stiffness | 5.0 N/μm |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Max Horizontal Load Capacity | 5 kg |
| Control | Closed-loop with PicoQ® absolute position sensing |
| Controller | Nano-Drive® or Nano-Drive®85 |
| Body Material | Aluminum |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-MET Series |
| Type | Motorized Piezoelectric Translation Stage |
| Motion Axes | 2-Axis (XY), 3-Axis (XYZ) |
| Control | Closed-Loop |
| Positioning Resolution | XY: 0.15 nm, Z: 0.005 nm |
| Position Noise | XY: <4 pm/√Hz, Z: <400 fm/√Hz |
| Resonant Frequency | XY: 1.0–1.4 kHz, Z: 13.5 kHz |
| Travel Range | XY: 75 µm, Z: 5 µm |
| Max Load | 100 g (horizontal/vertical) |
| Body Material | Aluminum |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-MET10 & Nano-MET20 |
| Motion Range | 10 µm (Nano-MET10), 20 µm (Nano-MET20) |
| Positioning Resolution | 0.01 nm (Nano-MET10), 0.02 nm (Nano-MET20) |
| Resonant Frequency | 4.6 kHz |
| Max. Load (Horizontal/Vertical) | 100 g |
| Sensor Technology | Integrated PicoQ® Absolute Encoder |
| Controller | Nano-Drive® |
| Body Material | Aluminum |
| Control Mode | Closed-Loop |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-METZ |
| Motion Range | 5 µm |
| Positioning Resolution | 0.005 nm |
| Resonant Frequency | 14.5 kHz |
| Position Noise Floor | < 400 fm/√Hz |
| Max. Load (Horizontal/Vertical) | 0.1 kg |
| Body Material | Aluminum or Titanium |
| Controller | Nano-Drive® |
| Product Type | Closed-Loop Electric Nanopositioning Stage |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-MTA Series |
| Type | Piezoelectric Single- and Dual-Axis Tip/Tilt Actuator |
| Motion Axes | 1 or 2 |
| Max Scan Frequency | 400 Hz |
| Tip/Tilt Range (standard) | ±2 mrad per axis |
| Tip/Tilt Range (extended) | ±5 mrad per axis |
| Resolution (standard) | 4 nm rad⁻¹ |
| Resolution (extended) | 10 nm rad⁻¹ |
| Resonant Frequency (X-axis, loaded) | 3.2 kHz (±2 mrad) / 2.8 kHz (±5 mrad) |
| Resonant Frequency (Y-axis, loaded) | 1.25 kHz (±2 mrad) / 800 Hz (±5 mrad) |
| Step Response Time | ≤2 ms |
| Controller Compatibility | Nano-Drive® or Nano-Drive®85 |
| Closed-Loop Position Sensing | Integrated PicoQ® capacitive sensor |
| Mirror Mounting Diameter | 25 mm |
| Body Materials | Aluminum, Invar, or Titanium |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows and GLP/GMP-relevant active optics integration |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-MZ |
| Motion Axis | Z-only |
| Drive Type | Piezoelectric |
| Control Mode | Closed-loop with integrated PicoQ® position sensing |
| Travel Range (Z) | 25 µm |
| Resolution | 0.05 nm |
| Resonant Frequency | 1100 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Max Horizontal Load | 0.5 kg |
| Center Aperture Diameter | 0.25" |
| Height (Low Profile) | 0.8" |
| Body Material | Aluminum |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-OP Series |
| Motion Range | 30 μm / 65 μm / 100 μm |
| Resolution | 0.06 nm / 0.13 nm / 0.2 nm |
| Resonant Frequency | 4 kHz (±20%) / 2 kHz (under 100 g load) |
| Stiffness | 3.0 N/μm (±20%) |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤2 μrad |
| Max Load (Horizontal) | 1.0 kg |
| Max Load (Vertical) | 0.5 kg |
| Body Material | Aluminum / Invar / Titanium |
| Control | Closed-loop with PicoQ® absolute position sensing |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-OPH |
| Drive Type | Motorized (Piezo-Based Direct Drive) |
| Motion Range Options | 30 μm / 50 μm / 100 μm |
| Closed-Loop Resolution | 0.06 nm (OPH30) / 0.1 nm (OPH50) / 0.2 nm (OPH100) |
| Resonant Frequency | 3.5 kHz (unloaded) ±20% |
| Stiffness | 3.0 N/μm ±20% |
| Angular Errors (Roll/Pitch) | ≤1 μrad |
| (Yaw) | ≤2 μrad |
| Max Horizontal Load | 1.0 kg |
| Max Vertical Load | 0.5 kg |
| Body Materials | Aluminum, Invar, or Titanium |
| Position Sensing | Integrated PicoQ® Absolute Piezoresistive Sensor |
| Controller | Nano-Drive® Platform |
| Aperture Diameter | 1.3 in (33 mm) |
| Stackable Architecture | Yes, for XYZ, XYθ, or custom multi-axis configurations |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-P Series |
| Motion Range | 15/35/70 μm |
| Resolution | 0.03/0.07/0.14 nm |
| Resonant Frequency | 2.5 kHz ±20% |
| Max Load | 0.2 kg |
| Construction | Invar and Titanium |
| Control | Closed-loop with integrated PicoQ® position sensors |
| Actuation | Piezoelectric |
| Guiding Principle | Monolithic flexure hinge (no Belleville springs) |
| Compliance | Designed for ISO/IEC 17025-aligned metrology environments, compatible with GLP/GMP data integrity requirements via Nano-Drive® controller audit trail logging |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-PDQ Series |
| Type | Motorized Nanopositioning Stage |
| Motion Axes | 2 or 3 (X/Y or X/Y/Z) |
| Travel Range | 50 μm or 75 μm per axis |
| Resolution | 0.1 nm (50 μm range) / 0.15 nm (75 μm range) |
| Resonant Frequency (X) | 2.5 kHz ±20% |
| Resonant Frequency (Y) | 1.5 kHz ±20% |
| Resonant Frequency (Z) | 1.0 kHz ±20% |
| Max Scanning Speed | 400 Hz |
| Stiffness | 3.0 N/μm |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Body Materials | Aluminum, Invar, or Titanium |
| Controller Compatibility | Nano-Drive®85 (HS models required for sub-2 ms step response) |
| Closed-Loop Technology | Integrated PicoQ® capacitive sensors |
| Aperture | Large central aperture optimized for optical path integration |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-Route®3D |
| Product Type | Motorized Translation Stage Control Software |
| Compatibility | LabVIEW-Based, USB-Enabled Nano-Drive® Controllers |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-SPM200 |
| Motion Range (XY) | 200 µm |
| Resolution | 0.4 nm |
| Resonant Frequency (X/Y) | 300 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Body Material | Aluminum |
| Controller | Nano-Drive® |
| Drive Type | Piezoelectric, Flexure-Guided, Closed-Loop |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-SPMZ |
| Product Type | Motorized Translation Stage |
| Coarse Travel | 25 mm |
| Fine Travel | 30 µm |
| Coarse Step Size | 95 nm |
| Encoder Resolution (optional) | 20 nm |
| Nanopositioning Resolution | 0.06 nm |
| Resonant Frequency (unloaded) | 4 kHz ±20% |
| Stiffness | 3.0 N/µm ±20% |
| Max Horizontal Load | 1.0 kg |
| Max Vertical Load | 0.5 kg |
| Body Material | Aluminum |
| Controller | MicroDrive™ & Nano-Drive® |
| Interface | Bidirectional USB |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-SPMZ |
| Product Type | Motorized Translation Stage |
| Motion Range (Coarse) | 25 mm |
| Coarse Step Size | 95 nm |
| Encoder Resolution (Optional) | 20 nm |
| Nanopositioning Range | 30 µm |
| Nanopositioning Resolution | 0.06 nm |
| Resonant Frequency (Unloaded) | 4 kHz ±20% |
| Resonant Frequency (100 g Load) | 2 kHz ±20% |
| Stiffness | 3.0 N/µm ±20% |
| Max Horizontal Load | 1.0 kg |
| Max Vertical Load | 0.5 kg |
| Body Material | Aluminum |
| Controller | MicroDrive® + Nano-Drive® |
| Interface | Bidirectional USB |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-T Series |
| Product Type | Motorized Nanopositioning Stage |
| Motion Axes | 2-Axis (XY) or 3-Axis (XYZ) |
| XY Travel Range | 100 μm / 200 μm |
| Z Travel Range | 20 μm / 50 μm |
| XY Resolution | 0.2 nm / 0.4 nm |
| Z Resolution | 0.04 nm / 0.1 nm |
| Closed-Loop Positioning Accuracy | Picometer-Level |
| Aperture | Large Central Opening for Optical Components |
| Control Architecture | Integrated PicoQ® Capacitive Sensing |
| Body Material | Aluminum or Invar |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Resonant Frequency (X) | 450 Hz / 400 Hz ±20% |
| Resonant Frequency (Y) | 250 Hz / 200 Hz ±20% |
| Resonant Frequency (Z) | 450 Hz / 350 Hz ±20% |
| Angular Deviation (Roll/Pitch) | ≤1 μrad |
| Angular Deviation (Yaw) | ≤3 μrad |
| Compatible Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-Theta |
| Product Type | Motorized Rotational Translation Stage |
| Motion Range | 2.0 mrad |
| Resolution | 4 nrad |
| Resonant Frequency (unloaded) | 2.0 kHz ±20% |
| Body Material | Aluminum or Invar |
| Control Architecture | Closed-loop with integrated PicoQ® position sensing |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-Theta/H |
| Product Type | Motorized Rotational Positioning Stage |
| Motion Range | ±2.5 mrad (total 5 mrad) |
| Resolution | 10 nrad |
| Repeatability | <20 nrad |
| Resonant Frequency (unloaded) | 300 Hz ±20% |
| Max Horizontal Load | 0.5 kg |
| Max Vertical Load | 0.2 kg |
| Body Materials | Aluminum, Invar, or Titanium |
| Control | Closed-loop via integrated PicoQ® capacitive sensors |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Nano-UHV100 |
| Product Type | Motorized Translation Stage |
| Motion Range (X/Y) | 100 µm × 100 µm |
| Resolution (XY) | 0.2 nm |
| Resonant Frequency (X) | 500 Hz ±20% |
| Resonant Frequency (Y) | 250 Hz ±20% |
| Stiffness | 1.0 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max. Horizontal Load | 0.5 kg |
| Max. Vertical Load | 0.2 kg |
| Body Material | Invar or Titanium |
| Bakeout Temperature | 100 °C |
| Vacuum Compatibility | ≤10⁻¹⁰ Torr |
| Control | Closed-loop with PicoQ® position sensing |
| Controller | Nano-Drive® |
| Brand | MCL Think Nano |
|---|---|
| Origin | Canada |
| Model | Nano-UHV200 |
| Motion Range (X/Y/Z) | 200 µm × 200 µm × 200 µm |
| Resolution (XYZ) | 0.4 nm |
| Resonant Frequency (X) | 300 Hz ±20% |
| Resonant Frequency (Y) | 150 Hz ±20% |
| Resonant Frequency (Z) | 175 Hz ±20% |
| Stiffness | 2 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max. Horizontal Load | 0.5 kg |
| Max. Vertical Load | 0.2 kg |
| Construction | Titanium & 316 Stainless Steel |
| UHV Compatibility | ≤1×10⁻¹⁰ Torr |
| Control | Closed-loop with PicoQ® absolute position sensing |
| Aperture | 2″ × 2″ center optical access |
| Brand | MCL Think Nano |
|---|---|
| Origin | USA |
| Model | Nano-UHV50 |
| Motion Range (X/Y) | 50 µm × 50 µm |
| Resolution (XY) | 0.1 nm |
| Resonant Frequency (X) | 500 Hz ±20% |
| Resonant Frequency (Y) | 250 Hz ±20% |
| Stiffness | 0.5 N/µm |
| Angular Deviation (Roll/Pitch) | ≤1 µrad |
| Angular Deviation (Yaw) | ≤3 µrad |
| Max. Horizontal Load | 0.5 kg |
| Max. Vertical Load | 0.2 kg |
| Body Material | Invar or Titanium |
| Bakeout Temperature | 100 °C |
| UHV Compatibility | ≤1×10⁻¹⁰ Torr |
| Aperture | 25 mm (1 inch) |
| Position Sensing | PicoQ® closed-loop absolute sensing |
| Controller | Nano-Drive® |