Yuelian
Filter
Showing 151–180 of 303 results
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH (optional down to 5 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | 20 min (0 °C → 100 °C), 60 min (−70 °C → 100 °C) |
| Cooling Rate | 20 min (20 °C → 0 °C), 90 min (20 °C → −70 °C) |
| Internal Volume Options | 80–800 L |
| Control System | PID + SSR/SCR bidirectional output with slope logic |
| Programming Capacity | 150 programs × 1500 segments |
| Safety Monitoring | 15-point real-time fault detection with auto-diagnostic display |
| Compliance | GB/T 2423, ISO 16750, ASTM D4332, IEC 60068-2, UL 1598, EN 60068 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236 |
| Temperature Range | −70 °C to 150 °C |
| Humidity Range | 5–98 %RH (customizable low-humidity option) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | −70 °C → 100 °C in ≈60 min |
| Cooling Rate | 20 °C → −70 °C in ≈90 min |
| Internal Volume Options | 80–1000 L |
| Refrigeration System | Single-stage air-cooled below −20 °C |
| Control Interface | LCD touch screen with bilingual (EN/CN) UI, 120 programs × 1200 segments, 999-cycle nesting |
| Compliance | GB/T 2423, ISO 16750, ASTM D4332, IEC 60068-2, UL 1598, EN 60068 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236 |
| Temperature Range | −60 °C to +150 °C (standard: −40 °C to +100 °C) |
| Humidity Range | 20–98 % RH |
| Temp. Accuracy | ±0.3 °C |
| Humidity Accuracy | ±2.5 % RH |
| Temp. Uniformity | ±1.0 °C |
| Humidity Uniformity | ±5 % RH |
| Heating Rate | −40 °C → +100 °C in ≈45 min |
| Cooling Rate | +20 °C → −40 °C in ≈90 min |
| Internal Dimensions | 100 × 80 × 100 cm (W×H×D) |
| External Dimensions | 160 × 187 × 132 cm (W×H×D) |
| Internal Material | Mirror-finish stainless steel (SUS304) |
| External Material | Brushed stainless steel |
| Insulation | Rigid polyurethane foam (glass wool for >100 °C options) |
| Refrigeration System | Air-cooled, single-stage, hermetic compressor |
| Power Supply | 3-phase, AC 220 V ±10 %, 60 Hz or AC 380/415 V ±10 %, 50 Hz |
| Weight | ≈530 kg |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236A–F |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Volume | 80 L to 800 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5 %RH to 98 %RH (custom low-humidity option available) |
| Temp. Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temp. Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | −70 °C → +100 °C in ≤60 min |
| Cooling Rate | +20 °C → −70 °C in ≤90 min |
| Control System | PID + SSR/SCR bidirectional output with slope logic |
| Programming Capacity | 150 programs × 1500 segments |
| Cycle Capability | 9999 cycles × 999 repeats, subdividable into 5 independent partial cycles |
| Safety Monitoring | 15-point real-time fault detection with auto-diagnostic logging |
| Refrigeration | Hermetic air-cooled system (single-stage for ≥−20 °C |
| Refrigerant | R404A / R507 (ozone-friendly) |
| Humidification | Surface evaporation type with dry-run and overheat protection |
| Dehumidification | 冷冻潜热式 (latent heat removal via refrigerated coil) |
| Construction | SUS#304 stainless steel interior & exterior |
| Insulation | Rock wool + rigid polyurethane foam |
| Power Supply | AC 220 V / 380 V ±10 %, 50 / 60 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236 |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| External Dimensions (W×H×D) | 93×131×81 cm to 180×196×123 cm |
| Capacity | 80 L to 1000 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5 %RH to 98 %RH (customizable low-humidity option) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | −40 °C → 100 °C in approx. 45 min |
| Cooling Rate | 20 °C → −70 °C in approx. 90 min |
| Control System | LCD touchscreen (Chinese/English), 120 programs × 1200 segments, 999 cycles, multi-PID logic, RS-232/RS-485 interface |
| Construction | Full SUS#304 stainless steel interior & exterior |
| Insulation | Rockwool + rigid polyurethane foam |
| Safety | Dual independent overtemperature protection, compressor overload, refrigerant pressure monitoring, power failure detection, fault logging with timestamped diagnostics |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-2236A–YL-2236F (6 variants) |
| Interior Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Exterior Dimensions (W×H×D) | 110×136×71 cm to 180×196×123 cm |
| Capacity | 80 L to 1000 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5 %RH to 98 %RH (custom low-humidity option available) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | −40 °C → 100 °C in approx. 45 min |
| Cooling Rate | 20 °C → −70 °C in approx. 90 min |
| Control System | 120 programs × 1200 segments, 999 cycles, PID + SSR/SCR bidirectional output, RS-232/RS-485 interface |
| Construction | Full SUS#304 stainless steel interior & exterior |
| Insulation | Rockwool + rigid polyurethane foam |
| Refrigeration | Single-stage air-cooled system (≥ −20 °C) |
| Humidification | Surface evaporation type with dry-run and overheat protection |
| Dehumidification | Refrigerant-based latent heat removal |
| Safety | 15-point fault detection, independent electronic overtemperature protector, compressor overload, power failure, and temperature limit safeguards |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236A–F |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Volume | 80 L to 800 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5 %RH to 98 %RH (optional low-humidity configuration) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | 0 °C→100 °C in ~20 min |
| Cooling Rate | 20 °C→−70 °C in ~90 min |
| Control System | PID + SSR/SCR bidirectional output with slope logic |
| Programming Capacity | 150 programs × 1500 segments |
| Cycles | 9999 × 999 with 5 independent sub-cycle divisions |
| Safety Monitoring | 15-point real-time system diagnostics |
| Refrigeration | Hermetic air-cooled dual-stage (≤−40 °C) or single-stage (>−40 °C) |
| Construction | SUS#304 stainless steel interior and exterior |
| Insulation | Rock wool + rigid polyurethane foam |
| Humidification | Surface evaporation type with auto-water-generation system |
| Dehumidification | Refrigerative latent heat removal |
| Power Supply | AC 220 V / 380 V ±10 %, 50/60 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2236A-0 |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| Volume | 80 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH (optional low-humidity configuration down to 5 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 %RH |
| Heating Rate | −70 °C → +100 °C in approx. 60 min |
| Cooling Rate | +20 °C → −70 °C in approx. 90 min |
| Refrigerant | R404A / R507 |
| Compressor | Tecumseh (France) |
| Control System | PID + SSR/SCR bidirectional synchronous output with slope logic |
| Programming Capacity | 120 programs × 1200 segments, 999 cycles, multi-PID tuning |
| Interface | RS-232 |
| Construction | Full SUS#304 stainless steel interior & exterior |
| Insulation | Rockwool + rigid polyurethane foam |
| Safety Protections | 15-point real-time monitoring (over-temperature, over-pressure, dry-run, phase failure, compressor overload, etc.) |
| Compliance | GB/T 10586, ISO 16750-4, ASTM D4332, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, UL 1598, EN 60068-2-78 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2280 |
| Temperature Range (High/Low) | +60 °C to +150 °C / −45 °C to −65 °C |
| Temperature Stability | ±0.2 °C |
| Transition Time (Hot ↔ Cold) | ≤5 min |
| High-Temp Ramp Rate | RT to 200 °C in ~30 min |
| Low-Temp Ramp Rate | RT to −70 °C in ~90 min |
| Insulation Material | High-density polyisocyanurate foam |
| Cooling System | Semi-hermetic two-stage compressor (water-cooled) |
| Control System | PID + SSR + microcomputer balanced temperature control |
| Power Supply | 3Φ 220 VAC ±10% 50/60 Hz or 3Φ 380–415 VAC ±10% 50 Hz |
| Safety Protections | Fuseless circuit breaker, compressor HP/LP switches, refrigerant high-pressure switch, fault warning system, audible alarm |
| Accessories | Two adjustable shelves |
| Weight | 1000–2480 kg (model-dependent) |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2280A / YL-2280B / YL-2280C / YL-2280D |
| Interior Dimensions (W×D×H, cm) | 40×30×35 |
| Exterior Dimensions (W×D×H, cm) | 162×200×142 |
| Temperature Range | High Temp. Zone: +60 °C to +150 °C |
| Low Temp. Zone | −10 °C to −65 °C (A: −45 °C, B: −55 °C, C/D: −65 °C) |
| High Temp. Ramp | RT to +200 °C in ≈30 min |
| Low Temp. Ramp | RT to −70 °C in ≈90 min |
| Temperature Recovery Time | ≤5 min |
| Temperature Uniformity | ±2.0 °C |
| Stability | ±0.2 °C |
| Insulation | High-density amino acid ethyl ester foam |
| Control System | PID + SSR + microcomputer-balanced thermostat (OYO-8226 controller, 320×240 LCD, bilingual interface) |
| Refrigeration | Semi-hermetic two-stage cascade system, water-cooled |
| Power Supply | 3Φ 220VAC±10% 50/60Hz or 3Φ 380/415VAC±10% 50Hz |
| Weight | 1000 kg / 1550 kg / 1680 kg / 1900 kg |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2280 |
| Chamber Configuration | Three-Zone (Hot Zone / Cold Zone / Test Zone) |
| Temperature Range | Preheat: +60°C to +200°C |
| Precool | −10°C to −70°C |
| Thermal Shock | +60°C to +150°C (Hot) / −10°C to −65°C (Cold) |
| Temperature Uniformity | ±2.00°C |
| Recovery Time (Hot/Cold) | ≤5 min |
| Control System | OYO-8226 PID Controller with LCD Interface (320 × 240 dots), RS-232 Communication |
| Programmable Cycles | Up to 9999 |
| Max. Program Storage | 120 Sets |
| Power Supply | AC 3φ 380 V, 50 Hz |
| Refrigeration | Dual-Stage Cascade System with Eco-Friendly Refrigerant |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Cooling Method | Water-Cooled |
| Ambient Operating Range | 10°C–35°C |
| Compliance | ASTM D5229, ISO 11359-2, JIS Z 2243, MIL-STD-810H Method 503.5, IEC 60068-2-14 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2280 |
| Temperature Range (High/Low Zones) | +60°C to +200°C / −10°C to −70°C |
| Thermal Shock Transition Time (2-tank mode) | ≤5 min (RT ↔ −65°C or RT ↔ +150°C) |
| Temperature Uniformity | ±2.00°C |
| Construction | Three-zone (pre-heat/pre-cool/test) or two-zone configurable |
| Refrigeration System | Dual-stage cascade refrigeration with eco-friendly refrigerant |
| Control System | OYO-8226 PID controller with 320×240 LCD interface |
| Programmability | 120 stored profiles, up to 9999 cycles, max segment time 999 h 59 min |
| Communication | RS-232 interface with PC software for remote programming, data logging & real-time monitoring |
| Power Supply | AC 3φ 380 V, 50 Hz |
| Compliance | Designed per ASTM D5229, IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8705 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2290 |
| Internal Dimensions (W×D×H) | 200×200×200 cm to 400×200×200 cm (configurable variants) |
| External Dimensions (W×D×H) | 270×225×220 cm to 470×225×220 cm |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Beige Powder-Coated Steel |
| Door | Single Swing, 85 cm W × 180 cm H |
| Temperature Range | –40 °C to +80 °C |
| Humidity Range | 30–95 %RH |
| Temp. Uniformity (unloaded) | ±2.0 °C |
| Humidity Uniformity (unloaded) | ±5 %RH |
| Temp. Stability | ±0.2 °C |
| Humidity Stability | ±2 %RH |
| Cooling Method | Water-Cooled |
| Heating/Cooling Rate | 60 min (RT → +80 °C), 50–120 min (RT → –10/–20/–40 °C) |
| Insulation | 100–150 mm Fire-Retardant PU Foam |
| Power Supply | 380 VAC, 3-Phase, 40–70 A |
| Controller | TEMI880 Programmable Touchscreen (LCD), PID + SSR Control, RS-232/RS-485 Interface |
| Safety Systems | Dual Over-Temp Protection (Electronic & Mechanical), Low-Water Cut-off, Dry-Heater Burnout Prevention, Compressor High-Pressure & Overload Protection, Phase Failure & Reverse-Phase Detection, Leakage Circuit Breaker, Surge Suppression |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-3-150 |
| Price | Upon Request |
| Rated Sinusoidal Force (peak) | 300 kgf |
| Rated Random Force (rms) | 300 kgf |
| Max Shock Force (peak) | 600 kgf |
| Frequency Range | 5–4000 Hz |
| Max Displacement (p-p) | 25 mm |
| Max Velocity | 2.0 m/s |
| Max Acceleration | 1000 m/s² |
| First-Order Resonant Frequency | 3400 Hz ±5% |
| Max Payload | 120 kg |
| Isolation Frequency | 2.0 Hz |
| Table Diameter | Ø150 mm |
| Moving Mass | 3 kg |
| Table Mounting Thread | 13×M8 |
| Magnetic Leakage | <1.0 mT |
| Table Dimensions (L×W×H) | 1756×818×1161 mm |
| System Weight | ~995 kg |
| Operating Ambient | 0–45 °C |
| Brand | Yuelian |
|---|---|
| Model | YL-3315M |
| Application | Textile, Synthetic Leather, Membrane Materials Abrasion & Pilling Resistance Testing |
| Standards Compliance | GB/T 21196-2007, GB/T 13775, FZ/T 20020, ASTM D3886, ASTM D4966, ASTM D4970, ISO 12947-1~4, ISO 12945-2, JIS L1096, IWS TM196/TM112, M&S Test Methods, GB/T 4802.1-1997 |
| Specimen Motion Path | Lissajous Curve (60.5 ± 0.5 mm horizontal × 24 ± 0.5 mm vertical) |
| Load Options | 200 g (clamping weight), 395 g (apparel), 594 g (furniture), 260 g (stainless steel disc) |
| Friction Head Types | A-type (28.8 −0.084 mm, 1.96 N / 9 kPa), B-type (90 −0.10 mm, 1.52 N / 12 kPa) |
| Rotational Speed | 50 ± 2 rpm |
| Counting Range | 0–999999 cycles |
| Configurable Stations | 4 or 8 |
| Power Supply | AC 220 V, 50 Hz, 500 W |
| Dimensions (W×D×H) | 885 × 600 × 410 mm |
| Weight | 150 kg |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-400WE |
| Temperature Range | 0–450 °C |
| Temp. Stability | ±0.2 °C |
| Temp. Uniformity | ±1 °C |
| Temp. Resolution | 0.1 °C |
| Time Resolution | 0.1 s |
| Displacement Accuracy | 0.001 mm |
| Volumetric Timing Resolution | 0.001 s |
| MFR Range | 0.1–150 g/10 min |
| MVR Range | 50–5000 cm³/10 min |
| Barrel ID | Φ2.095±0.005 mm |
| Die Length | 8.000±0.025 mm |
| Barrel Outer Diameter | Φ9.550±0.025 mm |
| Load Mass Tolerance | ±0.5% |
| Load Levels | 8 standard weights (0.325, 1.200, 2.160, 3.800, 5.000, 10.000, 12.000, 21.600 kg) |
| Display | 7-inch color TFT touchscreen |
| Cutting Mode | Manual & automatic |
| Data Output | Thermal printer + USB interface |
| Barrel Material | Nitrided Hastelloy C-276 |
| Die Material | Tungsten carbide |
| Insulation Chamber | Full SUS304 stainless steel |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-5507F |
| Price Range | USD 7,000 – 14,000 |
| Instrument Type | Free-Fall Impact Tester for Viscoelastic Foams |
| Nominal Impact Energy | 5 J |
| Impact Velocity | 100 mm/s (adjustable via drop height) |
| Pendulum Moment (Impact Constant) | 100 N·mm/rad |
| Load Cell Capacity | 100 N |
| Maximum Lift Height | 800 mm |
| Drop Height Adjustment Range | 0–800 mm (motorized, precision linear actuator) |
| Steel Ball Mass | User-configurable (standard options: 16 g, 25 g, 50 g, 100 g) |
| Sampling Rate | 100 kHz |
| Release Mechanism | Electromagnetic solenoid with IR position-synchronized trigger |
| Centering Adjustment | Motorized X-Y stage (±25 mm travel) |
| Dimensions (L×W×H) | 500 × 300 × 1400 mm |
| Net Weight | 35 kg |
| Power Supply | 220 V AC, 50/60 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-5570 / YL-5580 |
| Impact Energy | 5 J |
| Impact Velocity | 100 mm/s |
| Pendulum Moment (Impact Constant) | 100 N·mm |
| Load Cell Capacity | 100 N |
| Maximum Lift Height | 800 mm |
| Drop Height Range | 0–800 mm (motorized adjustment) |
| Data Acquisition Rate | 100 kHz |
| Ball Release Mechanism | Electromagnetic |
| Positioning | Motorized X-Y alignment with IR centering sensor |
| Dimensions | 500 × 300 × 1400 mm (L×W×H) |
| Weight | 35 kg |
| Power Supply | 220 V AC |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8801 |
| Test Angle Range | 20°–40° (adjustable) |
| Run-up Distance | 100 mm |
| Standard Steel Balls | ISO 3290 Grade 10, Sizes #2–#32 (1 set) |
| Calibration Weight | 500 g × 1 |
| Dimensions (W × D × H) | 60 cm × 20 cm × 45 cm |
| Net Weight | 25 kg |
| Compliance | GB/T 4852–2002, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-8801A |
| Pricing | Upon Request |
| Standard Compliance | GB/T 4852–2002, CNS 11888 |
| Test Method | Rolling Ball (Method A & B) |
| Inclination Angle Range | 0°–40° (adjustable, standard 30°) |
| Steel Ball Set | ISO 3290 Grade 10, 2–32 ball numbers (1 set) |
| Test Distance | 100 mm |
| Dimensions (W×D×H) | 45 × 27 × 26 cm |
| Weight | Approx. 15 kg |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8801A |
| Test Angle | 20°–40° (adjustable) |
| Run-up Distance | 100 mm |
| Standard Steel Balls | ISO 3290 Grade 10, Nos. 2–32 (1 set) |
| Load Weight | 500 g × 1 |
| Dimensions (W × D × H) | 60 × 20 × 45 cm |
| Weight | 25 kg |
| Compliance | GB/T 4852–2002, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Model | YL-8801AB |
| Measurement Principle | Rolling Ball Inclined Plane Method (ChP 2020 Vol. IV, General Chapter 0952 Method I) |
| Compliance Standards | ChP 0952, GB/T 2792, ASTM D3330, GB/T 12914, GB/T 13022 |
| Force Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N, 500 N, 1 kN |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Displacement Resolution | 0.005 mm |
| Test Speed Range | 5–500 mm/min (programmable) |
| Max Travel | 500 mm |
| Test Width | 55 mm |
| Drive System | Stepper Motor + Precision Ball Screw |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Dimensions (W×D×H) | 400 × 300 × 700 mm |
| Weight | ~28 kg |
| Safety Protections | Dual limit switches (upper/lower travel), overload cutoff, emergency stop, automatic halt on specimen failure, programmable force/travel limits |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8801B |
| Track Angle | 21.3° |
| Ball Diameter | 7/16 in (14# steel ball) |
| Ramp Length | 6.5 in |
| Dimensions | 23 × 6 × 7 cm (L × W × H) |
| Weight | 0.8 kg |
| Compliance | GB/T 4852–2002, PSTC-7 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8806C |
| Test Stations | 30 independent |
| Load per Station | 1 kg |
| Test Substrate | 30 pcs SUS#304 stainless steel plates |
| Timer Range | 0 s to 999 h 59 m 59 s (sexagesimal, LCD display) |
| Timer Power | Self-contained, battery-operated (imported module, ~7-year service life) |
| Dimensions (W×D×H) | 135 × 35 × 66 cm |
| Weight | 110 kg |
| Compliance | GB/T 2792, GB/T 4851, PSTC-7, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8806C |
| Test Stations | 30 independent |
| Load per Station | 1 kg |
| Test Substrate | 30 pcs SUS#304 stainless steel plates |
| Timer Range | 0 s to 999 h 59 m 59 s (sexagesimal, LCD display) |
| Timer Power | Self-powered (imported, battery-operated, ~7-year service life) |
| Dimensions (W×D×H) | 135 × 35 × 66 cm |
| Weight | 110 kg |
| Compliance | GB/T 2792, GB/T 4851, PSTC-7, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-8806C |
| Test Stations | 30 independent stations |
| Load per Station | 1 kg |
| Test Plate Material | SUS#304 stainless steel (30 plates) |
| Timer Range | 0 s to 999 h 59 m 59 s (sexagesimal LCD display) |
| Timer Lifespan | ~7 years (imported key components, battery-powered, no external power required) |
| Dimensions (W×D×H) | 135 × 35 × 66 cm |
| Weight | 110 kg |
| Compliance Standards | GB/T 2792, GB/T 4851, PSTC-7, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8807 |
| Test Stations | 10 independent |
| Load per Station | 1 kg (×10) |
| Test Plate Material | SUS#304 stainless steel (10 plates) |
| Timer Range | 0 s to 999 h 59 m 59 s (LCD, sexagesimal display) |
| Timer Lifespan | ~7 years (imported keyswitch, battery-powered, no external power required) |
| Dimensions (W×D×H) | 86 × 25 × 66 cm |
| Weight | 70 kg |
| Enclosure | Tempered glass anti-wind door |
| Compliance Standards | GB/T 4851, GB/T 2792, PSTC-7, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8807 |
| Test Stations | 10 independent stations |
| Load per Station | 1 kg (×10) |
| Timer Range | 0 s to 999 h 59 min (sexagesimal, LCD display, battery-powered) |
| Test Plate Material | Mirror-finish SUS#304 stainless steel |
| Dimensions (W×D×H) | 87 × 25 × 69 cm |
| Weight | 45 kg |
| Compliance | GB/T 2792, GB/T 4851, PSTC-7, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8808 |
| Temperature Range | +5°C to 150°C (±0.3°C accuracy) |
| Display Resolution | 0.1°C |
| Timer Capacity | 999 h 59 min 59 s (60-base, 10 independent channels) |
| Test Fixture | 10 stainless steel SUS#304 test plates |
| Load Mass | 1 kg per station (stainless steel, 10 pcs) |
| Chamber Material | Interior – SUS#304 stainless steel |
| Dimensions (W×D×H) | 85 × 25 × 58 cm |
| Weight | 95 kg |
| Compliance Standards | GB/T 2792, GB/T 4851, PSTC-7, CNS 11887, CNS 11888 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-8808 |
| Application | High-temperature tape holding power (creep resistance) testing under standardized load |
| Test Principle | Vertical static shear adhesion measurement at controlled elevated temperature |
| Temperature Range | Ambient to 200 °C (typical operational range for industrial tape validation) |
| Load Capacity | Standardized weights (e.g., 1 kg, 2 kg, 5 kg stainless steel weights per ASTM D3654/D3654M) |
| Substrate | Polished stainless steel plate (ASTM D1000-compliant surface finish) |
| Timing Resolution | 0.1 s, auto-stop on specimen detachment |
| Compliance | Designed to meet core requirements of ASTM D3654/D3654M, ISO 29862:2017, JIS Z 0237 |