Yuelian
Filter
Showing 91–120 of 303 results
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TS-800 |
| Pricing | Available Upon Request |
| Internal Dimensions (W×H×D) | 100 × 100 × 80 cm |
| External Dimensions (W×H×D) | 160 × 187 × 132 cm |
| Capacity | 800 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 % RH (optional low-humidity configuration down to 5 % RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 % RH |
| Temperature Stability | ±0.3 °C |
| Humidity Stability | ±2.5 % RH |
| Heating Rate | −70 °C → 100 °C in approx. 60 min |
| Cooling Rate | 20 °C → −70 °C in approx. 90 min |
| Control System | Intelligent PID + SSR/SCR bidirectional synchronous output with slope logic |
| Programmability | 150 programs × 1500 segments |
| Data Interface | RS-232 standard |
| Safety Monitoring | 15-point real-time fault detection with auto-diagnostic logging |
| Refrigeration | Twin-stage hermetic air-cooled system (R404A/R507) |
| Humidification | Surface evaporation type with auto water-generation unit and dry-run/overheat protection |
| Dehumidification | Latent heat removal via refrigerated coil |
| Construction | Interior & exterior SUS#304 stainless steel |
| Insulation | Rock wool + rigid polyurethane foam |
| Standard Accessories | Anti-fog double-glazed observation window, two adjustable stainless steel shelves, 100 mm test port, interior LED lighting, casters |
| Compliance | Designed per IEC 60068-2, GB/T 2423, ISO 16750-4, and ASTM D4332 environmental conditioning requirements |
| Brand | Yuelian |
|---|---|
| Model | TS-Series |
| Type | Climatic Environmental Test Chamber |
| Internal Volume Options | 80 L, 150 L, 225 L, 408 L, 800 L, 1000 L |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 % RH (optional low-humidity configuration down to 5 % RH) |
| Temp. Uniformity | ±0.5 °C |
| Humidity Uniformity | ±3 % RH |
| Temp. Stability | ±0.3 °C |
| Humidity Stability | ±2.5 % RH |
| Heating Rate | −70 °C → +100 °C in ≤60 min |
| Cooling Rate | +20 °C → −70 °C in ≤90 min |
| Control System | PID + SSR/SCR bidirectional synchronous output with slope logic |
| Programmability | 150 programs × 1500 segments, 9999 cycles × 999 repeats, 5 independent sub-cycles |
| Safety Monitoring | 15-point real-time fault detection with auto-diagnostic display |
| Refrigeration | Twin-stage air-cooled system (R404A/R507) for ≤−40 °C |
| Construction | SUS#304 stainless steel interior and exterior |
| Insulation | Rockwool + rigid polyurethane foam |
| Humidification | Surface evaporation type with auto-refill and dry-run protection |
| Dehumidification | Refrigerant-based latent heat removal |
| Power Supply | AC 220 V / 380 V ±10 %, 50/60 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YH1100 |
| Product Type | Automated |
| Transmittance Range | 0–100% |
| Haze Repeatability | <0.1 (with φ20 mm aperture) |
| Illumination Geometry | 0/D (0° incident / Diffuse reception) |
| Integrating Sphere Diameter | φ154 mm |
| Light Source | 400–700 nm LED array |
| Detector | PD array compliant with CIE V(λ) 2° photopic luminosity function |
| Measurement Wavelength Range | 400–700 nm (customizable extension available) |
| Aperture Options | φ20 mm / φ15 mm / φ8 mm / φ4 mm (single fixed aperture per unit) |
| Sample Thickness Limit | <170 mm |
| Measurement Time | ~1.5 s |
| Haze Resolution | 0.01% |
| Haze Unit | % |
| Inter-instrument Agreement (φ20 mm) | <0.4% |
| Dimensions (L×W×H) | 290 × 211 × 511 mm |
| Weight | 7.6 kg |
| Power Supply | DC 24 V, 3 A adapter |
| Light Source Lifetime | >3 million measurements or ≥5 years |
| Display | 7-inch TFT capacitive touchscreen |
| Interfaces | USB, RS-232 serial (printer port) |
| Data Storage | 1,000 standards + 20,000 samples |
| Supported Languages | English, Simplified Chinese, Traditional Chinese |
| Operating Temperature | 0–40 °C |
| Storage Temperature | −20–50 °C |
| Compliance Standards | ASTM D1003, ASTM D1044, ISO 14782, ISO 13468, GB/T 2410, JJF 1303–2011, JIS K7105, JIS K7361, JIS K7136, CIE 15.2 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YHTS-80 |
| Temperature Range | −80 °C to +250 °C |
| Temperature Transition Time (−55 °C ↔ +125 °C) | ≤10 s |
| Temperature Accuracy | ±0.5 °C |
| Temperature Resolution | 0.01 °C |
| Airflow Rate | 4–18 SCFM (1.9–8.5 L/s) |
| Measurement Modes | AIR MODE (ambient air sensing) or DUT MODE (direct device-under-test thermal coupling) |
| Operating Modes | High–Ambient–Low / High–Low / High–Ambient / Low–Ambient / Custom Programmable Sequencing |
| Control Modes | Manual / Programmed / Manual Cycling / Automatic Cycling |
| Dimensions (W×D×H) | 660 × 1050 × 1000 mm |
| Weight | 150 kg |
| Arm Extension Length | 140 cm |
| Vertical Adjustment Range | 720–1220 mm |
| Optional Insulated Viewing Window | Internal Diameter 140 mm, Height 55 mm (customizable per DUT footprint) |
| Power Supply | Single-phase 220 VAC, 50 Hz, 40 A |
| Required Pneumatic Supply | Inlet Temp. +15–+25 °C, Pressure 90–110 psig (6.2–7.6 bar), Flow Rate 1–1.5 m³/min, Dew Point ≤10 °C, Oil Content ≤0.01 ppm |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103 |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Travel Resolution | 0.005 mm |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Travel | 500 mm |
| Test Width | Ø140 mm |
| Control System | PC-based closed-loop control with USB interface |
| Data Acquisition | Real-time force/displacement sampling, MS-ACCESS database support |
| Compliance Features | Audit trail-ready data logging, configurable pass/fail limits, automatic stop on specimen failure or overload |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Motor Type | Stepper motor with timing belt and precision ball screw drive |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Power Consumption | 180 W |
| Standard Accessories | One set of peel fixtures, proprietary test software, USB communication cable |
| Brand | Yuelian |
|---|---|
| Model | YL-1103 |
| Load Capacity | 1–50 kgf |
| Max. Specimen Length | 300 mm |
| Max. Specimen Width | 110 mm |
| Test Speed Range | 1–500 mm/min (adjustable) |
| Force Resolution | 1/10,000 of full scale |
| Displacement Resolution | 0.005 mm |
| Dimensions (W×D×H) | 92 × 30 × 32 cm |
| Weight | 36 kg |
| Power Supply | AC 110–220 V, 50/60 Hz |
| Standard Interface | USB |
| Included | Dedicated PC Software |
| Brand | Yuelian |
|---|---|
| Model | YL-1103 |
| Type | Electronic Horizontal Tensile Tester |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ±0.5% of reading |
| Stroke Resolution | 0.005 mm |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Stroke | 500 mm |
| Test Width | Ø140 mm |
| Control System | PC-based closed-loop control with USB interface |
| Data Acquisition | Real-time sampling via dedicated interface board |
| Software Platform | Windows-compatible test management software with MS Access database backend |
| Compliance | Designed and validated per GB/T 20808–2011 (Chinese national standard for tissue paper tensile strength testing) |
| Power Supply | 220 V AC, 50/60 Hz, 5 A |
| Motor Drive | Stepper motor + precision ball screw + synchronous timing belt |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of pneumatic/mechanical grips, USB cable, software license |
| Brand | Yuelian |
|---|---|
| Model | YL-1103 |
| Application | Tape peel strength testing for LED packaging carriers |
| Force Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Travel Resolution | 0.005 mm |
| Maximum Test Stroke | 500 mm |
| Test Width | Ø140 mm |
| Speed Range | 5–500 mm/min (PC-programmable) |
| Control Interface | PC-based with USB connectivity |
| Data Output | Real-time force–displacement curves, tabular reports (MS-ACCESS compatible), statistical parameters (peak force, average peel force, yield point, modulus approximation) |
| Safety & Stop Modes | Overload cutoff, emergency stop, automatic halt on specimen failure, programmable upper/lower limit stops, auto-return function |
| Drive System | Stepper motor + precision ball screw + timing pulley transmission |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Rated Power | 180 W |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Net Weight | ~45 kg |
| Standard Accessories | One set of peel fixtures, proprietary test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103 |
| Load Capacity Options | 10, 20, 50, 100, 200 N |
| Force Resolution | 1/250,000 full scale |
| Test Stroke | 400 mm |
| Stroke Resolution | 0.005 mm |
| Speed Range | 5–500 mm/min (computer-programmable) |
| Maximum Specimen Width | 110 mm |
| Dimensions (W×D×H) | 110 × 30 × 26 cm |
| Weight | 36 kg |
| Power Supply | Single-phase, 100–240 VAC, 3 A |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103B |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N |
| Travel Range | 300 mm |
| Test Speed | 1–500 mm/min (software-controlled) |
| Force Resolution | 1/250,000 full scale |
| Displacement Resolution | 0.005 mm |
| Dimensions | 92 × 30 × 38 cm |
| Weight | 36 kg |
| Power Supply | AC 220 V |
| Interface | USB |
| Sample Width Max | 110 mm |
| Sample Length Max | 400 mm |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103S |
| Instrument Type | Electronic Tensile Testing Machine |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 500 mm |
| Test Width | 140 mm |
| Speed Range | 5–500 mm/min (PC-programmable) |
| Displacement Resolution | 1/500,000 full scale |
| Control Mode | PC-based closed-loop control |
| Stop Modes | Overload shutdown, emergency stop, automatic break-stop, upper/lower limit stop, auto-return |
| Power Supply | 220 V AC, 50/60 Hz, 5 A |
| Motor Type | Stepper motor with timing belt and precision ball screw drive |
| Rated Power | 180 W |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of peel fixtures, proprietary test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103S |
| Instrument Type | Electronic Tensile Testing Machine |
| Load Capacity Options | 10N, 20N, 50N, 100N, 200N (dual-range configuration available) |
| Force Resolution | 1/500,000 |
| Force Accuracy | ±0.3% of full scale |
| Travel Resolution | 1/500,000 |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Travel | 500 mm |
| Test Width | 140 mm |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Motor Type | Stepper motor with precision ball screw and timing belt drive |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of grips, PC-based control software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Model | YL-1103S |
| Origin | Guangdong, China |
| Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configurable) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Travel Resolution | 0.005 mm |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Travel | 500 mm |
| Test Width | 140 mm |
| Drive System | Stepper motor with precision ball screw and timing belt transmission |
| Power Supply | 220 V, 50/60 Hz, 5 A |
| Power Consumption | 180 W |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of peel fixtures, PC control software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1103S |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N, 20 N, 50 N, 100 N, 200 N (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel Resolution | 1/500,000 |
| Test Speed Range | 5–500 mm/min (PC-programmable) |
| Maximum Travel | 500 mm |
| Test Width | 140 mm |
| Drive System | Stepper motor + precision ball screw + synchronous timing belt |
| Power Supply | 220 V AC, 50/60 Hz, 5 A |
| Power Consumption | 180 W |
| Dimensions (W×D×H) | 1063 × 300 × 200 mm |
| Weight | ~45 kg |
| Standard Accessories | One set of peel fixtures, PC-based control software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1123 |
| Instrument Type | Electromechanical Tensile Tester |
| Load Capacity Options | 10 N to 20 kN (dual-range configurable) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 700 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable) |
| Displacement Resolution | 1/500,000 full scale |
| Control Interface | PC-based with USB connectivity |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Drive | AC servo motor + precision ball screw + timing belt transmission |
| Dimensions (W×D×H) | 720 × 520 × 1300 mm |
| Weight | ~115 kg |
| Standard Accessories | One set of universal grips, test software, USB interface cable |
| Compliance Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228.1, GB/T 2792, ASTM D3330, JJG 475 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1123 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N to 20 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel Resolution | 1/500,000 |
| Test Speed Range | 0.01–1000 mm/min (programmable) |
| Maximum Travel | 700 mm |
| Test Width | 420 mm |
| Drive System | Servo motor with precision ball screw and synchronous belt transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Rated Power | 400 W |
| Dimensions (W×D×H) | 720 × 520 × 1300 mm |
| Weight | ~115 kg |
| Compliance Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228.1, GB/T 2792, ASTM D3330, JIS B7721/B7733, DIN 51221, JJG 475 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Instrument Type | Electromechanical Tensile Testing Machine |
| Load Capacity Options | 10 N to 20 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 700 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable) |
| Displacement Resolution | 1/500,000 full scale |
| Control Interface | PC-based with USB connectivity |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Drive | Servo motor with precision ball screw and synchronous belt transmission |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Compliance Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228.1, GB/T 2792, ASTM D3330, JIS B7721/B7733, DIN 51221 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1123 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N – 20 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 700 mm |
| Test Width | 420 mm |
| Speed Range | 0.01 – 1000 mm/min (programmable via PC) |
| Position Resolution | 1/500,000 full stroke |
| Control Interface | PC-based closed-loop servo control |
| Drive System | AC servo motor + precision ball screw + timing belt transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Rated Power | 400 W |
| Dimensions (W×D×H) | 720 × 520 × 1300 mm |
| Weight | ~115 kg |
| Compliance Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228.1, GB/T 2792, ASTM D3330, JJG 475 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Instrument Type | Electronic Universal Testing Machine |
| Model | YL-1123 |
| Capacity Options | 10 N – 20 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Stroke Resolution | 0.005 mm |
| Test Speed Range | 0.01 – 1000 mm/min (computer-controlled, with manual grip jog buttons) |
| Maximum Test Stroke | 700 mm |
| Test Width | 350 mm |
| Drive System | Servo motor + precision ball screw + synchronous belt transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Power Consumption | 400 W |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Standard Configuration | One set of universal grips, PC-based test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Force Capacity Range | Not specified |
| Test Speed Range | Not specified |
| Load Cell Options | Interchangeable |
| Control Mode | Computer-servo controlled or standalone operation |
| Compliance | Designed for ASTM D638, D790, D412, ISO 527, ISO 178, ISO 37, GB/T 1040, GB/T 9341, GB/T 528 |
| Sample Holders | Modular fixture system (tensile grips, compression platens, bending fixtures) |
| Environmental Integration | Compatible with environmental chambers (e.g., temperature-controlled ovens) |
| Data Output | Stress–strain curves, peak load, yield strength, modulus, elongation at break, fracture energy |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1123 |
| Quotation | Available Upon Request |
| Load Capacity Options | 5–2000 kgf (selectable) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Crosshead Travel Resolution | 0.005 mm |
| Maximum Test Stroke | 700 mm (excluding fixtures) |
| Test Width | 350 mm |
| Speed Range | 0.5–500 mm/min |
| Force Unit Conversion | kgf, g, N, kN, lbf, ton (user-selectable) |
| Safety Stops | Overload, specimen rupture, emergency stop, upper/lower limit setpoints, over-travel protection |
| Control System | PC-based servo control with dedicated software |
| Dimensions (W×D×H) | 95 × 58 × 151 cm |
| Weight | ~140 kg |
| Power Supply | AC 220 V, 50–60 Hz, 4 A |
| Standard Accessories | One set of universal tensile grips, control software, USB/RS232 interface cable, software installation media |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Capacity Options | 5–2000 kgf (or 10 N–20 kN) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% FS |
| Stroke Resolution | 0.005 mm |
| Test Stroke | 700 mm (excl. grips) |
| Test Width | 350 mm |
| Test Speed Range | 0.5–500 mm/min |
| Force Units | kgf, g, N, kN, lbf, ton, MPa |
| Stop Modes | Overload stop, specimen rupture auto-stop, emergency stop, upper/lower limit set stop, over-travel protection |
| Control System | Full computerized servo control |
| Drive System | Servo motor + precision ball screw + synchronous timing belt |
| Dimensions (W×D×H) | 95 × 58 × 151 cm |
| Weight | ~140 kg |
| Power Supply | AC 220 V, 50–60 Hz, 4 A, 400 W |
| Standard Accessories | One set of universal tensile grips, USB interface cable, proprietary test software with data acquisition and reporting module |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1123 |
| Load Capacity Options | 10N–20kN (dual-range configurable) |
| Force Resolution | 1/500,000 |
| Force Accuracy | ≤ ±0.5% FS |
| Travel Resolution | 0.005 mm |
| Max Test Speed | 0.01–1000 mm/min |
| Stroke | 700 mm |
| Test Width | 350 mm |
| Drive System | Servo Motor + Precision Ball Screw |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Power Consumption | 400 W |
| Dimensions (W×D×H) | 72 × 52 × 130 cm |
| Weight | ~115 kg |
| Control Interface | PC-based with USB connectivity |
| Standard Accessories | One set of grips, proprietary test software, USB cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1125 |
| Instrument Type | Electronic Universal Testing Machine |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 1200 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable via PC) |
| Position Resolution | 1/500,000 full stroke |
| Control Interface | PC-based with USB connectivity |
| Compliance Standards | ISO 7500-1, ASTM E4, GB/T 228.1, GB/T 9341, GB/T 1449, ASTM D6109, JJG 475 |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Drive | Servo motor with precision ball screw and timing belt transmission |
| Dimensions (W×D×H) | 92 × 62 × 199 cm |
| Weight | ~422 kg |
| Software | Windows-based test control & data analysis suite with MS Access database support, real-time curve plotting, multi-sensor input, GLP-compliant audit trail, and automated parameter calculation per ISO, ASTM, GB, JIS, DIN, EN standards |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1125 |
| Instrument Type | Electronic Universal Testing Machine |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Displacement Resolution | 1/500,000 full scale |
| Crosshead Travel | 1200 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable) |
| Control System | PC-based closed-loop servo control |
| Drive System | Servo motor + precision ball screw + synchronous timing belt |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Power Consumption | 750 W |
| Dimensions (W×D×H) | 92 × 62 × 199 cm |
| Weight | ~422 kg |
| Compliant Standards | ISO 7500-1, ASTM E4, JJG 475-88, DIN 51221, JIS B7721/B7733, EN 10002-1, EN 10002-2, BS 1610, GB/T 228.1–2021, GB/T 1449–2005, GB/T 9341–2008, ASTM D6109–2010 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-1125 |
| Quotation | Upon Request |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Displacement Resolution | 1/500,000 full stroke |
| Test Speed Range | 0.01–1000 mm/min (software-controlled) |
| Maximum Stroke | 1200 mm |
| Test Width | 420 mm |
| Drive System | Servo motor + precision ball screw + timing belt transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Rated Power | 750 W |
| Dimensions (W×D×H) | 920 × 620 × 1990 mm |
| Weight | ~422 kg |
| Compliance Standards | ISO 7500-1, ASTM E4, EN 10002-1, GB/T 228, JJG 475, DIN 5122, JIS B7721/B7733, BS 1610 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1125 |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Crosshead Travel | 1000 mm |
| Test Width | 420 mm |
| Speed Range | 0.5–500 mm/min (PC-controlled) |
| Displacement Resolution | 0.005 mm |
| Control Interface | PC-based software with USB interface |
| Drive System | Servo motor + precision ball screw + timing pulley transmission |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Power Consumption | 750 W |
| Dimensions (W×D×H) | 92 × 62 × 199 cm |
| Weight | ~422 kg |
| Standard Accessories | One set of universal grips, proprietary test software, USB data cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1125 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/500,000 full scale |
| Force Accuracy | ±0.3% of reading |
| Crosshead Travel | 1200 mm |
| Test Width | 420 mm |
| Speed Range | 0.01–1000 mm/min (programmable) |
| Position Resolution | 1/500,000 full stroke |
| Control Interface | PC-based with USB connectivity |
| Compliant Standards | ISO 7500-1, ASTM E4, ASTM D6109, ASTM D3330, GB/T 228.1, GB/T 9341, GB/T 1449, JJG 475, EN 10002-1, JIS B7721/B7733, DIN 5122, BS 1610 |
| Data Management | MS-ACCESS database support, real-time curve plotting, multi-sensor calibration, GLP-compliant audit trail (software-configurable) |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Drive | Servo motor with precision ball screw and timing belt transmission |
| Dimensions (W×D×H) | 92 × 62 × 199 cm |
| Weight | 422 kg |
| Standard Accessories | One set of universal grips, test software, USB interface cable |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1125 |
| Maximum Test Load | 50 kN |
| Load Range | 1–50 kN (Full Scale) |
| Load Accuracy | ±0.3% of reading |
| Test Stroke | 800 mm |
| Displacement Resolution | 0.1 mm |
| Control System | PC-based closed-loop servo control |
| Drive System | Servo motor + precision ball screw |
| Standards Compliance | ISO 7500-1, ASTM E4, GB/T 228.1–2021, GB/T 1449–2005, GB/T 9341–2008, ASTM D6109–2010, EN 10002-1, JIS B7721/B7733 |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-1125 |
| Instrument Type | Electromechanical Universal Testing Machine |
| Load Capacity Options | 10 N to 50 kN (dual-range configuration available) |
| Force Resolution | 1/250,000 full scale |
| Force Accuracy | ≤ ±0.5% of reading |
| Crosshead Travel | 1000 mm |
| Test Width | 420 mm |
| Speed Range | 0.5–500 mm/min (computer-controlled) |
| Position Resolution | 0.005 mm |
| Control Mode | Full PC-based operation |
| Power Supply | 220 V, 50/60 Hz, 10 A |
| Motor Type | Servo motor with precision ball screw and timing belt transmission |
| Rated Power | 750 W |
| Dimensions (W×D×H) | 920 × 620 × 1990 mm |
| Weight | ~422 kg |
| Standard Accessories | One set of universal grips, proprietary test software, USB interface cable |
| Force Units | N, kgf, lbf, g, ton, MPa |
| Safety Features | Overload stop, emergency stop button, specimen rupture auto-stop, upper/lower limit programmable stop, automatic return-to-initial-position function |