Chemical Analysis Instruments
Filter
Showing 2641–2670 of 10669 results
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Model | FLS1000 |
| Spectral Range | 185 nm – 5500 nm |
| Lifetime Range | 10 ps – 10 s |
| Sensitivity (RMS) | >35,000:1 |
| Monochromator Focal Length | 325 mm |
| Grating Configuration | Interchangeable triple-grating turret (single- or dual-monochromator options) |
| Software | FluOracle® v4.x (supports ASTM E275, ISO 11698, USP <1031>, GLP-compliant audit trail & 21 CFR Part 11 optional modules) |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | FS5 v2 |
| Dispersion Element | Grating |
| Instrument Type | Steady-State and Time-Resolved Fluorescence Spectrometer |
| Slit Width (Spectral Bandpass) | 0–30 nm |
| Optical Resolution | 0.01 nm |
| Sensitivity | 4000:1 (Signal-to-Noise Ratio) |
| Wavelength Accuracy | ±0.5 nm |
| Excitation Sources | Xenon Arc Lamp, Pulsed Laser Diodes (e.g., 375 nm, 405 nm, 445 nm, 485 nm, 635 nm), Optional OPO/UV Laser Systems |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | IR5 |
| Instrument Type | Benchtop Laboratory FTIR Spectrometer |
| Wavenumber Range | 350–8000 cm⁻¹ |
| Spectral Resolution | 0.01 cm⁻¹ |
| Signal-to-Noise Ratio (S/N) | 20,000:1 (at 4 cm⁻¹, 1 min scan, MCT detector) |
| Wavenumber Accuracy | ±0.5 cm⁻¹ |
| Detector Options | Standard DTGS |
| Software Platform | Miracle™ v5.x |
| Optional Module | FT-PL (Fourier Transform Photoluminescence) with Integrated Laser Excitation Source |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LifeSpec II |
| Wavelength Dispersion Element | Dual Grating Monochromator |
| Spectral Bandpass (Slit) | 0–60 nm |
| Optical Resolution | 0.01 nm |
| Sensitivity (Signal-to-Noise Ratio) | 6000:1 |
| Wavelength Accuracy | ±0.1 nm |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LifeSpec II Series |
| Price | Upon Request |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LP980 |
| Pricing | Available Upon Request |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Mini-Tau |
| Spectral Dispersion | Interference Filter-Based |
| Instrument Type | Steady-State and Time-Resolved Fluorescence Spectrometer |
| Slit Width (Spectral Bandpass) | 0–60 nm |
| Spectral Resolution | 50 nm |
| Signal-to-Noise Ratio | 3000:1 |
| Wavelength Accuracy | ±5 nm |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | RM5 |
| Instrument Type | Confocal Raman Microspectrometer |
| Spectral Range | 50–15000 cm⁻¹ |
| Spectral Resolution | ≥1 cm⁻¹ (FWHM) |
| Spatial Resolution | Down to 1 µm |
| Low-Wavenumber Cutoff | <50 cm⁻¹ |
| Spectral Reproducibility | ≤0.02 cm⁻¹ |
| Brand | Edinburgh Instruments |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | RMS1000 |
| Spectral Range | 50–30000 cm⁻¹ |
| Spectral Resolution | ≤0.1 cm⁻¹ (FWHM) at ≥800 mm focal length |
| Spatial Resolution | XY ≤ 0.5 µm, Z ≤ 1 µm |
| Minimum Wavenumber | 50 cm⁻¹ |
| Spectral Reproducibility | ≤ ±0.02 cm⁻¹ |
| Brand | Edwards Vacuum |
|---|---|
| Origin | Germany |
| Model | ELD 500 |
| Instrument Type | Portable |
| Detection Method | Vacuum Mode & Pressure Mode |
| Minimum Detectable Leak Rate | 1×10⁻¹² mbar·L/s (vacuum mode) |
| Startup Time | ≤120 s |
| Response Time | <1 s |
| Maximum Inlet Pressure | 1500 Pa |
| Helium Purge Speed | 2.5 L/s |
| Leak Rate Display Range | 1×10⁻³ to 1×10⁻¹³ Pa·m³/s |
| [Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Model | EDX 2800B |
| Form Factor | Benchtop / Floor-Standing |
| Industry-Specific Use | Electronics Manufacturing & QC |
| Elemental Range | S (16) to U (92) |
| Quantification Range | 1 ppm – 99.99 wt% |
| Energy Resolution | 149 ± 5 eV (at Mn Kα) |
| Repeatability (RSD) | ≤ 0.1% for major elements |
| Measurement Time | 100–300 s per sample |
| Operating Temperature | 15–30 °C |
| Relative Humidity | 40–50% RH |
| Power Supply | AC 220 V ± 5 V, 50/60 Hz |
| Detector | Si-PIN semiconductor, Peltier-cooled |
| X-ray Tube | 50 kV max, 1 mA max, air-cooled, 50 W nominal |
| Multichannel Analyzer | 2048-channel MCA with digital pulse processing |
| Collimator Options | 8 automatic sizes (0.2–8 mm Ø) |
| Filter Options | 6 programmable primary beam filters |
| Calibration | Auto-curve selection, matrix-matched standards included |
| Software | XRAYAnalyzer v3.x, compliant with GLP data integrity requirements] |
| Brand | Ekspla |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported Instrument |
| Model | CARS |
| Instrument Type | Confocal Micro-Raman Spectrometer |
| Spectral Range | 740–4000 cm⁻¹ |
| Spectral Resolution | 1 cm⁻¹ |
| Spatial Resolution | 0.5 µm |
| Minimum Wavenumber | 740 cm⁻¹ |
| Spectral Reproducibility | ±1% |
| Brand | Ekspla |
|---|---|
| Model | Fast Scan |
| Spectral Range | 0.2–3.5 THz (6–116 cm⁻¹) |
| Spectral Resolution (Fast Mode) | 10 GHz |
| Spectral Resolution (Fast/Slow Hybrid Mode) | 5 GHz |
| Acquisition Rate | 10 spectra/s |
| SNR | >10⁶:1 @ 0.4 THz |
| Origin | Lithuania |
| Import Status | Imported Instrument |
| Distributor Type | Authorized General Distributor |
| Category | Terahertz Time-Domain Spectroscopy (THz-TDS) System |
| Brand | Ekspla |
|---|---|
| Origin | Imported (Lithuania) |
| Model | SFG FS |
| Tuning Range (IR) | 2.3–10 μm (4300–1000 cm⁻¹) |
| Visible Beam | 532 nm, <2 cm⁻¹ linewidth, ~1 mJ pulse energy, 20–30 ps pulse duration |
| SFG Output Range | 432–505 nm |
| Spectral Resolution | <6 cm⁻¹ |
| Detection Sensitivity | ~10 photons/shot |
| Acquisition Rate | 10 Hz |
| Polarization Purity | >1:100 (linear, selectable) |
| IR Pulse Energy | 200–20 μJ |
| Brand | Ekspla |
|---|---|
| Origin | Lithuania (EU) |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | SFG PS |
| Price | Upon Request |
| Spectral Range | 625–4300 cm⁻¹ |
| Spectral Resolution | <6 cm⁻¹ (optional <2 cm⁻¹) |
| Pulse Duration | 29 ± 5 ps |
| Repetition Rate | 50 Hz |
| IR Tuning Range | 2.3–10 µm (optionally up to 16 µm) |
| VIS Wavelength | 532 nm (optional 1064 nm or tunable 420–680 nm) |
| Beam Geometry | Co-propagating, non-collinear (optional collinear) |
| Incidence Angles | Fixed (~60° VIS, ~55° IR |
| Polarization Control | Motorized s/p selection for IR, VIS, and SFG (purity > 1:100) |
| Detection | Time-gated photomultiplier tube (PMT) |
| Laser Source | Diode-pumped mode-locked Nd:YAG (PL2231 series) |
| OPG System | PG501-DFG (standard) or PG511-DFG (high-resolution) |
| Sample Compartment | Vertically oriented, customizable, compatible with Langmuir-Blodgett troughs, temperature/humidity cells, and in situ reaction chambers |
| Brand | Ekspla |
|---|---|
| Origin | Lithuania |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | SFG |
| Price | Upon Request |
| IR Tuning Range | 2.3–10 µm (4300–1000 cm⁻¹) |
| Spectral Resolution | < 6 cm⁻¹ |
| Detection Sensitivity | ~10 photons/shot |
| Acquisition Rate | 10 Hz |
| VIS Beam | 532 nm, < 2 cm⁻¹ linewidth, ~1 mJ pulse energy, 20–30 ps pulse duration, linear polarization (>100:1 extinction ratio) |
| IR Beam | 2.3–10 µm tuning, < 6 cm⁻¹ linewidth, linear polarization (>100:1), 20–200 µJ pulse energy |
| SFG Output Wavelength | 432–505 nm (with 532 nm VIS pump) |
| Optional Extension | Up to 16 µm (625 cm⁻¹) IR coverage |
| Brand | Ekspla |
|---|---|
| Origin | Lithuania |
| Model | T-SPEC |
| Spectral Bandwidth | up to 4.5 THz |
| Dynamic Range | >70 dB at 0.4 THz |
| Acquisition Rate | up to 10 spectra/sec |
| Spectral Resolution | down to 2.5 GHz |
| Delay Line | Bearing-Free Optical Delay Stage |
| Operation Modes | Transmission & Reflection |
| Imaging Capability | High-Spatial-Resolution THz Imaging |
| Control | Fully Computer-Controlled via Dedicated Software |
| Key | Brand: Ekspla |
|---|---|
| Origin | Imported (Lithuania) |
| Model | Ekspla-THz |
| Spectral Range | 0.1–3 THz |
| Temporal Resolution | <1 ps |
| Emitter Substrate | Low-Temperature-Grown GaAs (LT-GaAs) |
| Integrated Optics | Hyper-spherical high-resistivity silicon lens |
| Pump Laser Requirement | <150 fs pulses, 800 nm central wavelength |
| Detection Bandwidth (FWHM) | >700 GHz |
| Typical Output Power | >10 µW (with 100 mW Ti:Sapphire laser) |
| Compliance | Designed for ASTM E2964-compliant THz-TDS configurations |
| Software Interface | Compatible with LabVIEW, MATLAB, and Python-based acquisition frameworks |
| Brand | Ekspla |
|---|---|
| Origin | Imported (Lithuania) |
| Model | THz-1000 |
| Wavelength Compatibility | 1030 nm and shorter (optimized for 1000 nm pump) |
| Emitter Material | Low-Temperature-Grown GaBiAs |
| Detector Material | GaBiAs Epitaxial Layer |
| Spectral Range | 0.2–5 THz |
| Emitter Antenna | Coplanar Hertzian dipole, 70 µm arm width, 20 µm photosensitive gap |
| Detector Electron Mobility | ~5000 cm²/V·s |
| Detector Carrier Lifetime | < 0.5 ps |
| Integrated Optics | Hemispherical high-resistivity silicon lens (Ø15 mm) |
| Bias Voltage Range (Emitter) | Adjustable DC bias (typ. 0–30 V) |
| THz Power Conversion Efficiency | 7×10⁻⁴ |
| Detector Mounting | In-plane micro-positioning optomechanical holder with SMA RF output |
| Compliance | Designed for ultrafast laser-driven THz time-domain spectroscopy (TDS) systems |
| Brand | Ekspla |
|---|---|
| Origin | Imported (Lithuania) |
| Model | THz-TDS |
| Pump Laser | Mode-locked Ti:Sapphire, 760–840 nm, >60 mW avg. power, pulse width <50 fs (optional 20 fs), rep rate 50–100 MHz |
| THz Bandwidth | 0.1–3 THz (3.3–100 cm⁻¹) |
| Spectral Resolution | >15 GHz (corresponding to >70 ps time-domain scan window) |
| Dynamic Range | >1000:1 (electric field amplitude at 0.6 THz) |
| THz Emitter & Detector | LT-GaAs photoconductive antennas with integrated hyperhemispherical Si lenses, mounted on precision X-Y stages |
| Delay Line | Motorized optical delay line, max. scan range 300 ps (extendable) |
| Detection | Lock-in amplified electro-optic or photoconductive sampling |
| Polarization | Linear, configurable for horizontal/vertical THz polarization |
| Incidence Angle for Reflection | Adjustable 30°–50° |
| Imaging Resolution | ~1 mm (raster-scanned 2D transmission/reflection mapping) |
| Software | Real-time acquisition, FFT-based spectral extraction, transmission/reflection coefficient calculation, raw data export (.txt, .mat), source code available for customization |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | ECC-PAT-Core |
| Dimensions | 90 × 54 × 70 mm (H × W × D) |
| Electrode Diameter | 18 mm |
| Electrolyte Volume | as low as 0.05 cm³ |
| Weight | 640 g |
| Separator Diameter | 18 mm |
| Material | Battery-grade Al (lower plunger), Cu (upper plunger), PP (insulation sleeve), optional 316L stainless steel current collectors |
| Compatible With | All PAT-series test cells, ECC-Std, ECC-Ref, ECC-Combi, ECC-Air, ECC-DEMS, ECC-Press, ECC-Opto-Std, ECD-o-DL, ECD-2-DL |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | ECC-Ref |
| Dimensions | 90 × 54 × 70 mm (H × W × D) |
| Electrode Diameter | 18 mm |
| Electrolyte Volume | 0.1 mL (min.) |
| Weight | 640 g |
| Construction Materials | Stainless Steel (316L), PEEK, Aluminum (lower plunger), Copper (upper plunger), Polypropylene (PP), PTFE/PE sealing elements |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | ECD-3 |
| Displacement Resolution | ≤50 nm |
| Measurement Range | 0–500 µm |
| Linear Sensor Output | ±10 V DC |
| Linearity | <0.15% of full scale |
| Drift | ≤100 nm/h |
| Electrolyte Volume Requirement | ~1 mL |
| Electrode Diameter | 10 mm (max thickness: 1.0 mm) |
| Operating Temperature Range | −20 °C to +70 °C |
| Dimensions (H×W×D) | 230 × 100 × 110 mm |
| Weight | 1.5 kg |
| Compatible Electrolytes | Organic (e.g., LiPF₆ in EC/DMC), Aqueous (with Au upgrade kit) |
| Load on Working Electrode | Fixed 130 g |
| Housing Material | PEEK |
| Seals | EPDM |
| Electrode Separation | Fused quartz frit |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | ECD-3 Nano |
| Displacement Resolution | ≤5 nm |
| Measurement Range | 100 µm / 250 µm (selectable) |
| Linear Accuracy | <0.1% of full scale |
| Output Signal | DC voltage, –10 to +10 V |
| Sensor Type | High-precision capacitive transducer |
| Electrolyte Volume | ~1 mL (minimum), up to 3 mL |
| Electrode Compatibility | Disk electrodes up to Ø10 mm × 1.0 mm thickness |
| Operating Temperature Range | –20 °C to +70 °C (with external temperature control) |
| Dimensions (H×W×D) | 230 mm × 100 mm × 110 mm |
| Weight | 2.5 kg |
| Load on Working Electrode | Fixed 130 g (adjustable via optional load kit) |
| Sealing Materials | PEEK, EPDM, stainless steel 1.4404, or gold-plated components (aqueous-compatible upgrade) |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | PAT-Cell-Press |
| Pressure Range | 0–2.5 bar (abs) |
| Sensor Type | Laser-Welded Piezoresistive Transducer |
| Sealing | Glass-to-Metal + Single PE O-Ring |
| Dimensions (L×W×H) | 69 mm × 49 mm × 73 mm |
| Weight | 0.5 kg |
| Electrode Materials | Al (lower plunger), Cu (upper plunger), PP insulator sleeve |
| Optional Current Collectors | Stainless Steel 316L |
| Output Signals | Analog ±10 V (pressure, temperature, current, half-cell voltage) |
| Integrated Data Logger | USB interface, simultaneous recording of pressure, temperature, cell current, and half-cell potential |
| Compliance | Helium-leak tested (<1×10⁻⁹ mbar·L/s), battery-grade material certified per ISO 9001 manufacturing controls |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | PAT-Single-Stand |
| Dimensions (W × D) | 105 × 113 mm |
| Height | 80 mm (standalone), 110 mm (with PAT-Cell installed) |
| Weight | 0.56 kg (standalone), 0.96 kg (with PAT-Cell) |
| Material | Battery-grade Al (lower plunger), Cu (upper plunger), PP insulator sleeve |
| Optional current collectors | Stainless steel 316L |
| Electrode configuration | 2-electrode or 3-electrode (with integrated ring-type reference electrode) |
| Connectivity | 4-mm banana sockets or Sub-D hardwired interface |
| Compatibility | Universal potentiostats (e.g., Gamry Reference 3000), battery cyclers, and PAT-series test cells |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | PAT-Stand-4 |
| Dimensions (W × D) | 301 × 119 mm |
| Height | 84 mm (standalone) / 114 mm (with PAT-Cell mounted) |
| Weight | 0.67 kg |
| Compatibility | Universal potentiostats/galvanostats (e.g., Gamry Reference 3000), PAT-Core and ECC-PAT-Core cells |
| Electrical Interface | 4-mm banana sockets or Sub-D hardwired connector |
| Environmental Suitability | Compatible with gloveboxes and environmental chambers |
| Brand | EL-Cell |
|---|---|
| Origin | Germany |
| Model | PAT-Tray |
| Dimensions (W × D) | 315 mm × 315 mm |
| Height | 120 mm (empty) / 148 mm (loaded) |
| Weight | 6.9 kg (empty) |
| Channel Capacity | 16 (4 × 4 matrix) |
| Integrated Data Logger | Voltage (half-cell & full-cell), Current, Time, Temperature |
| Compatibility | Gamry Reference 3000, BioLogic VMP-3, Arbin BT2000, and other standard potentiostats/galvanostats |
| Material | Battery-grade Al (lower plunger), Cu (upper plunger), PP insulation sleeve |
| Operating Environment | Compatible with Binder KB53 and equivalent climate chambers |
| Brand | ELASTOCON |
|---|---|
| Origin | Sweden |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ES 14 |
| Quotation | Upon Request |
| Temperature Range | 100–900 °C |
| Temperature Stability | ±10 °C |
| Thermocouple Types | Type N (controller), Type K (max temp sensor) |
| Tube Material | Fused quartz (quartz glass) |
| Heating Zone Dimensions | Ø25 × 200 mm |
| Overall Dimensions (W×D×H) | 350 × 275 × 355 mm |
| Net Weight | 22 kg |
| Voltage | 220–240 V, 1-phase, 50 Hz |
| Power Consumption | 500 W |
| Gas Flow Rate | 0.1–2 L/min |
| Included Accessories | Digital temperature controller, overtemperature safety limiter, drying tube, flowmeter, wash bottle, five fused quartz crucibles |
| Compliance | Designed for ISO 247, ISO 1408, ASTM D297, ASTM D1603 |
| Brand | ELDICO Scientific AG |
|---|---|
| Origin | Switzerland |
| Model | ED-1 |
| Instrument Type | Single-Crystal Electron Diffractometer |
| Sample Size Range | < 1000 nm |
| Beam Energy | 160 keV |
| Detector | DECTRIS QUADRO |
| Angular Precision | Sub-micrometer five-axis goniometer |
| Resolution | 0.82 Å |
| Chamber Geometry | Octagonal sample chamber |