- All
- Favorite
- Popular
- Most rated
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Model | CA-310 |
| Measurement Principle | Coulometric Karl Fischer Titration |
| Moisture Range | 1 ppm to 100% (5 µg – 999.9999 mg H₂O) |
| Accuracy | ≤ 0.3% RSD (for samples > 1 mg H₂O) |
| Precision | ±3 µg (for 10–1000 µg H₂O) |
| Sensitivity | 0.1 µg H₂O |
| Max Electrolysis Rate | 2620 µg H₂O/min |
| Electrolysis Current | Up to 516 mA |
| Endpoint Detection | Continuous current polarization potential difference |
| Background Correction | Automatic, real-time display |
| Sample Introduction | Manual or via optional vaporizer (VA-300/VA-200 series, etc.) |
| Channels | Up to 4 simultaneous coulometric cells (optional multi-channel control unit) |
| Display | 8.4-inch color TFT-LCD touchscreen (Chinese & English UI) |
| Data Storage | 9999 test records |
| Compliance | ASTM D1533, D3401, D4017, D4928, D6304, D7375, E1064 |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VA-121 |
| Titration Method | Fully Automatic Coulometric Karl Fischer Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 µA |
| Water Content Range | 0.5 µg to 999.9999 mg |
| Accuracy | <0.3% RSD |
| Minimum Dispense Volume | 0 µL |
| Titration Control Precision | N/A |
| Heating Temperature Range | 250–1000 °C |
| Heating Module | Fe-Cr-Al Resistance Wire Electronic Furnace (800 W) |
| Max Sample Mass | ≤10 g |
| Detection Limit | ≥5 ppm (as H₂O) |
| Carrier Gas | Nitrogen, Flow Rate: 0.1–0.5 L/min |
| Power Supply | AC 100–120 V / 220–240 V, 50/60 Hz, 1100 VA |
| Dimensions (W×D×H) | ~420 × 260 × 420 mm |
| Weight | ~15.5 kg |
| System Configuration | VA-121 coupled with CA-310 Coulometric Titrator |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | CA-200 |
| Measurement Principle | Coulometric Karl Fischer Titration |
| Channel Configuration | Single-channel |
| Water Content Range | 10 µg – 100 mg H₂O |
| Precision | ≤0.3% RSD (for samples ≥1 mg H₂O, n=10) |
| Minimum Dispensing Increment | 1/2000 of burette volume |
| Electrolysis Current | 430 mA |
| Average Titration Rate | 2.2 mg H₂O/min (36 µg H₂O/sec) |
| Display | 5.7-inch color LCD |
| Data Storage | 20 single files + 50 composite files |
| Interface Options | RS-232C (optional), USB host port (dual), balance auto-input via serial/USB, internal I/O for titration cell/vaporizer control |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| Power Consumption | 80 VA (100–120 V), 310 VA (230–240 V) |
| Dimensions (main unit) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| Stirrer Dimensions | 120 × 180 × 148 mm |
| Weight | ~1 kg |
| Compliance | GLP/GMP-ready architecture, 21 CFR Part 11-compatible software available (optional) |
| Brand | MITSUBISHI CHEMICAL |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer Accessory |
| Sample Introduction Method | Boat-type automated vaporization unit |
| Compatible Titrator | CA-310 |
| Moisture Measurement Range | 0.5 µg to 999.9999 mg |
| Measurement Resolution | ±0.1 µA |
| Accuracy | <0.3% RSD |
| Minimum Dispensing Volume | 0 µL |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VA-236S |
| Titration Method | Fully Automatic Coulometric Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 µA |
| Water Content Range | 0.5 µg to 999.9999 mg |
| Accuracy | <0.3% RSD |
| Minimum Dispensing Volume | 0 µL |
| Titration Control Precision | N/A (Coulometric mode, current-controlled electrolysis) |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | CA200C |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Water Measurement Range | 10 µg – 100 mg H₂O |
| Accuracy | ≤ 0.3% RSD (for samples ≥ 1 mg H₂O) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Titration Speed | 2.2 mg H₂O/min (36 µg H₂O/sec) |
| Electrolysis Current | 430 mA |
| Precision | CV ≤ 0.3% (n = 10, ≥1 mg H₂O) |
| Display | 5.7-inch color LCD |
| Data Storage | 20 single files + 50 composite files |
| Interfaces | Dual USB ports, RS-232C (optional), balance auto-input support |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| Power Consumption | 80 VA (100–120 V), 310 VA (230–240 V) |
| Dimensions (main unit) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Instrument Type | Volumetric Karl Fischer Titrator |
| Titration Mode | Fully Automatic |
| Measurement Resolution | 0.1 µg |
| Water Content Range | 0.1–999.999 mg |
| Measurement Accuracy | ±0.2 mV, ±0.02 µA |
| Minimum Dispensing Volume | 1/1000 of burette volume |
| Titration Control Precision | 0.1% |
| Display | 8.4-inch color touchscreen |
| Channel Configuration | Single-channel dual-pump system |
| Max. Expandable Channels | 4 (via master console) |
| Sample Heating | Stepwise Temperature Control (Patent No. 3284783) |
| Data Integrity Compliance | GLP/GMP-ready |
| Interface | USB host/device ports for data export/import and method transfer |
| SOP Functionality | Embedded standard operating procedure guidance engine |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Model | CA-310EO |
| Titration Method | Fully Automated Coulometric Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 5 μg to 999.9999 mg |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Sensitivity | 0.1 μg H₂O |
| Maximum Electrolysis Current | 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (up to 2.64 mg H₂O/min in High-Speed Mode) |
| Endpoint Detection | Continuous Polarization Potential Difference |
| Sample Heating Control | Stepwise Temperature Control (Patent No. 3284783) |
| Display | 8.4-inch Color TFT Touchscreen LCD |
| Data Storage Capacity | 9999 Test Records |
| GLP/GMP Compliance | Full Audit Trail, Electronic Signatures, and Data Integrity Support |
| Connectivity | 4× USB ports, 1× LAN port, Optional Wireless Channel Control |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | CVS-300 |
| Titration Method | Fully Automated Coulometric Karl Fischer Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Current Resolution | ±0.1 µA |
| Water Content Range | 5 µg to 999.9999 mg |
| Measurement Accuracy | <0.3% RSD |
| Minimum Dispense Volume | 0 µL |
| Titration Control Precision | N/A |
| Brand | MITSUBISHI CHEMICAL |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Moisture Range | 10 µg – 100 mg H₂O |
| Accuracy | ≤0.3% RSD (≥1 mg H₂O, n=10) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Electrolysis Current | 430 mA |
| Average Titration Speed | 2.2 mg H₂O/min |
| Display | 5.7-inch color LCD |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| Dimensions (Analyzer) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| Brand | MITSUBISHI CHEMICAL |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Moisture Range | 1 ppm – 100% (10 µg – 100 mg H₂O) |
| Accuracy | ≤0.3% RSD (n=10, ≥1 mg H₂O) |
| Minimum Dispensing Volume | 1/2000 of Titrator Volume |
| Electrolysis Current | 430 mA |
| Average Titration Speed | 2.2 mg H₂O/min |
| Display | 5.7-inch Color LCD |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| Dimensions (Analyzer) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| VA-210 Vaporizer Temp. Range | 70–199 °C |
| Carrier Gas | N₂, 0.1–0.5 L/min |
| Power | AC 100 V, 160 VA |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | VA-122 |
| Heating Zones | Low-Temp Furnace (70–300 °C) & High-Temp Furnace (250–1000 °C) |
| Heating Element | Fe-Cr-Al resistance wire, 1000 W |
| Sample Capacity | ≤10 g |
| Detection Limit | ≥10 ppm (as H₂O) |
| Carrier Gas | N₂, flow rate 0.1–0.5 L/min |
| Power Supply | AC 100–120 V or 220–240 V, 50/60 Hz, 1900 VA |
| Dimensions | 690 × 290 × 410 mm (W×D×H) |
| Weight | ~20 kg |
| Compatible Analyzer | CA-310 Coulometric Karl Fischer Titrator |
| Measurement Principle | Thermal liberation of surface-bound and adsorbed water prior to coulometric KF titration |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KF-31 |
| Titration Method | Fully Automatic Volumetric Titration |
| Instrument Type | Volumetric Karl Fischer Moisture Analyzer |
| Measurement Resolution | 0.1 µA |
| Water Content Range | 0.01 mg – 999.999 mg H₂O (equivalent to ~10 µg – 999.999 mg absolute water) |
| Accuracy | ≤0.3% RSD |
| Minimum Dispensing Volume | 1/2000 of burette capacity |
| Titration Control Precision | 0.1 µL |
| Burette Capacity | 5 mL |
| Electrode Detection | Continuous Current Polarization (Dual-Platinum Electrode System) |
| Display | 5.7-inch Full-Color LCD Touchscreen |
| Data Storage | Internal memory for ≥1 titration factor calibration, ≥3 user-defined methods |
| Connectivity | USB × 2 (PC, keyboard, USB flash drive, auto fluid handling), RS-232C × 2 (printer, analytical balance, vaporizer units) |
| Compatible Vaporizers | VA-200, VA-300, VA-230, VG-200 (all with stepwise temperature control) |
| Operating Environment | 15–40 °C, ≤85% RH (non-condensing) |
| Power Supply | AC 100/120/220/240 V, 50/60 Hz, 60 VA |
| Dimensions | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~3.8 kg (excluding titration cell and power adapter) |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Titration Method | Fully Automated Coulometric Titration |
| Measurement Resolution | 0.1 µg H₂O |
| Moisture Range | 5 µg – 999.9999 mg H₂O |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Minimum Dispensing Increment | 1/2000 of burette volume |
| Titration Control Precision | 0.1 µg H₂O |
| Electrolysis Current | Up to 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (2.64 mg H₂O/min in High-Speed Mode) |
| Background Correction | Automatic, Real-Time Display |
| Sample Heating Control | Stepwise Temperature Optimization (Patent No. 3284783) |
| Electrode Options | Membrane-Free or Membrane-Type Generator Electrodes |
| Compliance | GLP/GMP Data Integrity Support |
| Interface | 4× USB, 1× LAN, RS-232 for Balance Integration |
| Display | 8.4″ Color TFT Touchscreen |
| Data Storage | 9999 Test Records |
| Scheduled Power-On/Off | 99 Presets |
| Dimensions (Main Unit) | 244 × 161 × 215 mm (W×D×H) |
| Weight (Main Unit) | 2.0 kg |
| Brand | MITSUBISHI CHEMICAL |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Moisture Range | 1 ppm – 100% w/w (10 µg – 100 mg H₂O) |
| Accuracy | ≤0.3% RSD (for ≥1 mg H₂O, n=10) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Electrolysis Current | 430 mA |
| Titration Speed | 36 µg H₂O/sec (avg. 2.2 mg H₂O/min) |
| Display | 5.7-inch color LCD |
| Data Storage | 20 user-defined methods × 50 sub-files |
| Interface | RS-232C (optional), USB storage port, balance input (auto-weighing), internal/external communication ports |
| Power | AC 100–120 V / 230–240 V, 50/60 Hz |
| Dimensions (Analyzer) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| VA-200 Vaporizer | Temp. range 70–300 °C, N₂ carrier gas 0.1–0.5 L/min, max. sample mass 10 g, weight ~5.5 kg |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | CVS-210 |
| Titration Method | Fully Automated Coulometric Karl Fischer Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 0.5 μg to 999.9999 mg |
| Accuracy | <0.3% RSD |
| Minimum Dispensing Volume | 0 μL |
| Titration Control Precision | 0 (coulometric, current-controlled, no reagent dispensing) |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | CA-310SJ |
| Titration Method | Fully Automatic Coulometric Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 µA |
| Water Content Range | 5 µg to 999.9999 mg |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Titration Control Precision | 0.1 µL |
| Electrolysis Current | Up to 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (2.64 mg H₂O/min in High-Speed Mode) |
| Detection Sensitivity | 0.1 µg H₂O |
| Repeatability | ±3 µg (for 10–1000 µg H₂O) |
| Display | 8.4-inch Color TFT Touchscreen LCD |
| Data Storage Capacity | 9999 test records |
| Environmental Operating Range | 15–40 °C, ≤85% RH (non-condensing) |
| Power Supply | AC 230–240 V, 310 VA, 50/60 Hz |
| Dimensions (Main Unit) | 244 × 161 × 215 mm (W×D×H) |
| Weight (Main Unit) | 2.0 kg |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | CVS-122 |
| Titration Method | Fully Automatic Coulometric Karl Fischer Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 0.5 μg to 999.9999 mg |
| Accuracy | <0.3% RSD |
| Minimum Dispense Volume | 0 μL |
| Titration Control Precision | 0 (coulometric, current-controlled, no burette dispensing) |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Model | CA-310PH |
| Titration Method | Fully Automatic Coulometric Titration |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 5 μg to 999.9999 mg |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Titration Control Precision | 0.1 μL |
| Electrolysis Current | Up to 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (2.64 mg H₂O/min in High-Speed Mode) |
| Detection Sensitivity | 0.1 μg H₂O |
| Blank Correction | Automatic, Real-Time Display |
| Sample Heating Control | Stepwise Temperature Control (Patent No. 3284783) |
| Display | 8.4-inch Full-Color TFT Touchscreen LCD |
| Data Storage Capacity | 9999 test records |
| GLP/GMP Compliance | Yes (Audit Trail, Electronic Signatures, User Access Levels) |
| Interface | 4× USB, 1× LAN, RS-232 for Balance Integration |
| Operating Environment | 15–40 °C, ≤85% RH (non-condensing) |
| Power Supply | AC 230–240 V, 310 VA, 50/60 Hz |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Model | CA-310BO |
| Titration Method | Fully Automatic Coulometric Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 µA |
| Water Content Range | 5 µg to 999.9999 mg |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Sensitivity | 0.1 µg H₂O |
| Maximum Electrolysis Current | 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (2.64 mg H₂O/min in High-Speed Mode) |
| Background Correction | Auto-selected & continuously displayed |
| Sample Heating Control | Stepwise Temperature Control (Patent No. 3284783) |
| Display | 8.4-inch color LCD touchscreen |
| Data Storage Capacity | 9999 test records |
| GLP/GMP Compliance | Yes |
| Interface | 4× USB, 1× LAN |
| Operating Environment | 15–40 °C, ≤85% RH (non-condensing) |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | VA-210 |
| Titration Method | Fully Automated Coulometric Karl Fischer Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 0.5 μg to 999.9999 mg |
| Measurement Accuracy | <0.3% RSD |
| Minimum Dispensing Volume | 0 μL |
| Titration Control Precision | N/A |
| Brand | MITSUBISHI CHEMICAL |
|---|---|
| Origin | Japan |
| Model | CA-200 |
| Measurement Principle | Coulometric Karl Fischer Titration |
| Water Content Range | 10 µg – 100 mg H₂O |
| Accuracy | ≤ 0.3% RSD (for ≥1 mg H₂O, n=10) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Electrolysis Current | 430 mA |
| Average Titration Speed | 2.2 mg H₂O/min |
| Display | 5.7-inch color LCD |
| Dimensions (Analyzer) | 220 × 350 × 360 mm (W×D×H) |
| Weight | ~5 kg |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| VA Consumption | 80 VA (100–120 V), 310 VA (230–240 V) |
| Brand | Nittoseiko Analytech |
|---|---|
| Origin | Japan |
| Model | CA-310R |
| Titration Method | Fully Automated Coulometric Titration |
| Instrument Type | Coulometric Karl Fischer Moisture Analyzer |
| Measurement Resolution | ±0.1 μA |
| Water Content Range | 5 μg to 999.9999 mg |
| Accuracy | < 0.3% RSD (for samples > 1 mg H₂O) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Titration Control Precision | 0.1 μL |
| Electrolysis Current | Up to 516 mA |
| Average Titration Speed | 2.2 mg H₂O/min (2.64 mg H₂O/min in High-Speed Mode) |
| Detection Sensitivity | 0.1 μg H₂O |
| Baseline Correction | Automatic, Real-Time Display |
| Sample Heating Control | Stepwise Temperature Control (Patent No. 3284783) |
| Data Integrity Compliance | GLP/GMP-ready |
| Interface | 4× USB, 1× LAN |
| Operating Environment | 15–40 °C, ≤85% RH (non-condensing) |
| Brand | Mitsubishi Chemical |
|---|---|
| Origin | Japan |
| Model | KF-200 |
| Instrument Type | Volumetric Karl Fischer Titrator |
| Water Content Range | 0.1 mg – 999 mg H₂O |
| Titration Accuracy | ±0.02 mL (with 10 mL syringe) |
| Minimum Dispensing Volume | 1/2000 of burette volume |
| Display | 5.7-inch color LCD |
| Burette Capacity | 10 mL (optional 25 mL) |
| Dispensing Speed | 1 mL / 1.5 sec |
| Data Storage | 20 single files + 50 composite files |
| Interface | RS-232C (optional), USB host (2 ports), balance auto-input, internal/external I/O |
| Power Supply | AC 100–120 V / 230–240 V, 50/60 Hz |
| Dimensions (main unit) | 330 × 320 × 148 mm |
| Weight (main unit) | ~5 kg |
Show next