- All
- Favorite
- Popular
- Most rated
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 4100 |
| Pricing | Available Upon Request |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MVR Evaporator Technology |
| Pricing | Upon Request |
| Sample Processing | Industrial Wastewater Treatment |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 560 |
| Throughput | Up to 36 samples per batch |
| Drive Type | Brushless DC motor with variable-speed control |
| Homogenization Motion | Vertical reciprocating + rotational motion |
| Cleaning Modes | Aqueous rinse, organic solvent rinse, ultrasonic-assisted cleaning |
| Enclosure | Full-integrated transparent safety door with interlock |
| Safety Compliance | CE-marked per EN 61000-6-2/6-4 and EN 61000-3-2/3-3 |
| Software Interface | Touchscreen HMI with method storage, real-time status monitoring, and fault logging |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EXPEC 790S |
| Pricing | Available Upon Request |
| Brand | New Biolink |
|---|---|
| Model | UHP-RO Series |
| Max Operating Pressure | 20 MPa |
| Membrane Type | High-Pressure Tolerant RO Element with Open-Channel Feed Spacer |
| Feed Compatibility | High-Salinity Wastewater (TDS up to 120,000 mg/L) |
| Recovery Rate | ≥75% (system-dependent) |
| Origin | Beijing, China |
| Application | Laboratory-Scale Wastewater Concentration and Brine Minimization |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | AMSP-100 |
| Sample Introduction Modes | Headspace, Liquid Injection, SPME (Solid-Phase Microextraction) |
| Auto-Needle Exchange | Yes |
| Vial Bottom Detection | Yes (enables ≤10 µL residual sampling) |
| Collision Detection | Yes |
| Agitation Method | Oscillatory (stir-bar-free) mixing |
| GC/GC-MS Compatibility | Universal (vendor-neutral interface) |
| Regulatory Alignment | Designed for GLP-compliant workflows |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | ADP-5 |
| Instrument Type | Graphite Block Digestion System |
| Automation Level | Fully Automated |
| Sample Capacity | 72 positions |
| Temperature Range | Ambient to 240 °C |
| Temperature Control | Dual independent PID-controlled graphite blocks |
| Temperature Accuracy | ±0.1 °C |
| Heating Principle | Uniform conductive heating via high-density pyrolytic graphite blocks |
| Reagent Channels | 11 independent chemically resistant fluid paths (HF-compatible) |
| Integrated Functions | Automated reagent addition, sample tube lifting/oscillation mixing, programmable digestion ramping, acid evaporation (dry-down), post-digestion tubing rinse, and final volumetric dilution |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CM-Series Ceramic Membrane System |
| Application | Wastewater Treatment |
| Filtration Modes | Cross-flow Microfiltration (MF) and Ultrafiltration (UF) |
| Pore Size Range | 50 nm – 1.4 µm (MF) |
| Molecular Weight Cut-off (MWCO) | 8–50 kDa (UF) |
| Operating Temperature | Up to 120 °C |
| pH Tolerance | 0–14 |
| Max. Operating Pressure | ≤10 bar |
| Chemical Resistance | Compatible with strong acids, alkalis, oxidants (e.g., NaOCl, H₂O₂), and organic solvents |
| Cleaning Regime | CIP-compatible with alkaline, acidic, and enzymatic solutions |
| Typical Flux Recovery Rate | >95% after standard CIP |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APNE-12 |
| Instrument Type | Automated Quantitative Nitrogen Concentrator |
| Temperature Range | Ambient to 70 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Maximum Sample Volume per Vial | ≤200 mL |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 271 |
| Sampling Principle | Negative-Pressure Passive Draw |
| Flow Range | 0.2–500 mL/min |
| Response Time for Instantaneous Retention | ≤60 s after threshold exceedance |
| Channel Configuration | Dual independent sampling channels |
| Standard Sampling Positions | 8 (expandable to 16) |
| Flow Path Treatment | Electropolished stainless steel with SilcoNert®/Sulfinert® inert coating and active heating (60–120 °C) |
| Compliance | Designed to meet HJ 759–2015 requirements for ambient VOC monitoring |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | ADP5 |
| Pricing | Available Upon Request |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 760 |
| Balance Options | 0.01 mg (10 µg) or 0.1 mg resolution |
| Anti-static Ionizer | Integrated dual-nozzle air ionization system |
| Robotic Arm | 4-axis articulated robot with ±0.05 mm repeatability |
| Vibration Isolation | Triple-stage passive damping platform |
| Weighing Enclosure Control | Motorized draft shield door actuation synchronized with weighing cycle |
| Sample Tube Handling | Barcode-scanned vial identification, automated cap removal/placement in dedicated sterile zone |
| Data Output | CSV/Excel export, audit-trail-enabled database logging compliant with GLP requirements |
| Compliance | Designed to support ISO/IEC 17025 workflows and FDA 21 CFR Part 11–ready data integrity architecture |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DTRO |
| Application | Industrial Wastewater Treatment & High-Salinity Liquid Purification |
| Membrane Configuration | Disc Tube Reverse Osmosis (DT-RO) |
| Feed Water SDI Tolerance | Up to 6.5 |
| Typical Recovery Rate | 75–90% |
| Effluent Conductivity | As low as 100 µS/cm |
| Design Service Life | 5–10 years |
| COD<sub>Cr</sub> Tolerance | 1,000–20,000 mg/L |
| Total Dissolved Solids (TDS) Tolerance | 1,000–20,000 mg/L |
| Operating Cost | < USD 0.30 per cubic meter (based on typical energy & consumables) |
| Brand | EXPEC |
|---|---|
| Model | ETV 720 |
| Origin | Zhejiang, China |
| Type | Solid Direct Introduction Electrothermal Vaporization System |
| Max Temp | 3000 °C (infrared non-contact detection + PID control) |
| Sample Capacity | 40 boats |
| Motion Control | Micrometer-level precision positioning |
| Gas Flow Control | Milliliter-level accuracy |
| Automation | Fully automated sample loading, insertion, and thermal program execution |
| Compliance | Designed for ISO/IEC 17025-aligned workflows, compatible with GLP/GMP data integrity requirements |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Filtration System |
| Sample Processing | Waste Water Treatment |
| Filter Types Supported | Activated Carbon Filter, Catalyst Filter, Bag Filter, High-Voltage Insulating Oil Filter, Depth Filter, Sterile Filter, Corrosion-Resistant Filter |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Model | EXPEC 550 |
| Extraction Vessel Capacity | 10–60 mL |
| Operating Pressure Range | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Cycle Time per Sample | 15–30 min |
| Solvent Consumption | Reduced by ≥70% vs. Soxhlet |
| Safety Compliance | Integrated Leak Detection, Over-Pressure & Over-Temperature Interlocks, Method Validation Alert System |
| Heating Jacket Surface Temp | <50 °C |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APNE-12 |
| Pricing | Available Upon Request |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | FSI-12 |
| Application Standard | GBZ/T 192.4–2007 |
| Automation Level | Unattended Operation |
| Sample Throughput | 12-position high-throughput carousel |
| Reagent Handling | Automated pyrophosphoric acid dispensing |
| Digestion Control | Dual-sensor independent channel temperature regulation (±0.5 °C) |
| Stirring | Adjustable speed per channel |
| Filtration | Optimized funnel geometry with real-time liquid-level monitoring |
| Compliance | Designed for occupational hygiene laboratories requiring traceable, auditable sample preparation per Chinese national standards |
| Brand | New Biolink |
|---|---|
| Model | XBL-UF Series |
| Origin | Beijing, China |
| Membrane Configuration Options | Hollow Fiber, Spiral-Wound, Tubular, Flat Sheet |
| Operating Pressure Range | 0.03–1.2 MPa |
| Molecular Weight Cut-Off (MWCO) | 1,000–500,000 Da |
| Primary Application | Wastewater Treatment, Process Stream Clarification, Biomolecule Separation |
| Compliance | Designed for GLP-compliant labs |
| Brand | Xinbaili (New Biolink) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | High-Salinity and Refractory Wastewater Treatment System |
| Pricing | Available Upon Request |
| Sample Processing Capability | Industrial and Laboratory-Scale Wastewater Treatment |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 270 |
| Dilution Range | Up to 10,000× |
| Number of Independent Channels | 6 |
| Pressure Measurement Principle | Absolute Pressure Transducers |
| Dead Volume | Minimized via Optimized Flow Path Design |
| Tubing Material | Chemically Inert, Passivated Stainless Steel |
| Optional Module | Humidification Kit for Calibration Gas |
| Control Interface | Integrated Tablet via Wi-Fi (No External PC Required) |
| Data Management | Local Storage with Label Printing Support |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | APLE-3500 |
| Extraction Pressure | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Pump Flow Rate | 100 mL/min |
| Extraction Cell Volumes | 1, 5, 11, 22, 34, 66, and 100 mL |
| Cycle Time per Sample | <20 min |
| Solvent Consumption (typical) | ≥1.5 mL per 1 g sample |
| Compliance | EPA Method 3545, HJ 782–2016, HJ 783–2016 |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 3900 |
| Pricing | Upon Request |
Show next