- All
- Favorite
- Popular
- Most rated
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 4100 |
| Pricing | Available Upon Request |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 560 |
| Throughput | Up to 36 samples per batch |
| Drive Type | Brushless DC motor with variable-speed control |
| Homogenization Motion | Vertical reciprocating + rotational motion |
| Cleaning Modes | Aqueous rinse, organic solvent rinse, ultrasonic-assisted cleaning |
| Enclosure | Full-integrated transparent safety door with interlock |
| Safety Compliance | CE-marked per EN 61000-6-2/6-4 and EN 61000-3-2/3-3 |
| Software Interface | Touchscreen HMI with method storage, real-time status monitoring, and fault logging |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EXPEC 790S |
| Pricing | Available Upon Request |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | AMSP-100 |
| Sample Introduction Modes | Headspace, Liquid Injection, SPME (Solid-Phase Microextraction) |
| Auto-Needle Exchange | Yes |
| Vial Bottom Detection | Yes (enables ≤10 µL residual sampling) |
| Collision Detection | Yes |
| Agitation Method | Oscillatory (stir-bar-free) mixing |
| GC/GC-MS Compatibility | Universal (vendor-neutral interface) |
| Regulatory Alignment | Designed for GLP-compliant workflows |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 271 |
| Sampling Principle | Negative-Pressure Passive Draw |
| Flow Range | 0.2–500 mL/min |
| Response Time for Instantaneous Retention | ≤60 s after threshold exceedance |
| Channel Configuration | Dual independent sampling channels |
| Standard Sampling Positions | 8 (expandable to 16) |
| Flow Path Treatment | Electropolished stainless steel with SilcoNert®/Sulfinert® inert coating and active heating (60–120 °C) |
| Compliance | Designed to meet HJ 759–2015 requirements for ambient VOC monitoring |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | ADP5 |
| Pricing | Available Upon Request |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 760 |
| Balance Options | 0.01 mg (10 µg) or 0.1 mg resolution |
| Anti-static Ionizer | Integrated dual-nozzle air ionization system |
| Robotic Arm | 4-axis articulated robot with ±0.05 mm repeatability |
| Vibration Isolation | Triple-stage passive damping platform |
| Weighing Enclosure Control | Motorized draft shield door actuation synchronized with weighing cycle |
| Sample Tube Handling | Barcode-scanned vial identification, automated cap removal/placement in dedicated sterile zone |
| Data Output | CSV/Excel export, audit-trail-enabled database logging compliant with GLP requirements |
| Compliance | Designed to support ISO/IEC 17025 workflows and FDA 21 CFR Part 11–ready data integrity architecture |
| Brand | EXPEC |
|---|---|
| Model | ETV 720 |
| Origin | Zhejiang, China |
| Type | Solid Direct Introduction Electrothermal Vaporization System |
| Max Temp | 3000 °C (infrared non-contact detection + PID control) |
| Sample Capacity | 40 boats |
| Motion Control | Micrometer-level precision positioning |
| Gas Flow Control | Milliliter-level accuracy |
| Automation | Fully automated sample loading, insertion, and thermal program execution |
| Compliance | Designed for ISO/IEC 17025-aligned workflows, compatible with GLP/GMP data integrity requirements |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Model | EXPEC 550 |
| Extraction Vessel Capacity | 10–60 mL |
| Operating Pressure Range | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Cycle Time per Sample | 15–30 min |
| Solvent Consumption | Reduced by ≥70% vs. Soxhlet |
| Safety Compliance | Integrated Leak Detection, Over-Pressure & Over-Temperature Interlocks, Method Validation Alert System |
| Heating Jacket Surface Temp | <50 °C |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | APNE-12 |
| Pricing | Available Upon Request |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | FSI-12 |
| Application Standard | GBZ/T 192.4–2007 |
| Automation Level | Unattended Operation |
| Sample Throughput | 12-position high-throughput carousel |
| Reagent Handling | Automated pyrophosphoric acid dispensing |
| Digestion Control | Dual-sensor independent channel temperature regulation (±0.5 °C) |
| Stirring | Adjustable speed per channel |
| Filtration | Optimized funnel geometry with real-time liquid-level monitoring |
| Compliance | Designed for occupational hygiene laboratories requiring traceable, auditable sample preparation per Chinese national standards |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 270 |
| Dilution Range | Up to 10,000× |
| Number of Independent Channels | 6 |
| Pressure Measurement Principle | Absolute Pressure Transducers |
| Dead Volume | Minimized via Optimized Flow Path Design |
| Tubing Material | Chemically Inert, Passivated Stainless Steel |
| Optional Module | Humidification Kit for Calibration Gas |
| Control Interface | Integrated Tablet via Wi-Fi (No External PC Required) |
| Data Management | Local Storage with Label Printing Support |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | APLE-3500 |
| Extraction Pressure | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Pump Flow Rate | 100 mL/min |
| Extraction Cell Volumes | 1, 5, 11, 22, 34, 66, and 100 mL |
| Cycle Time per Sample | <20 min |
| Solvent Consumption (typical) | ≥1.5 mL per 1 g sample |
| Compliance | EPA Method 3545, HJ 782–2016, HJ 783–2016 |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 3900 |
| Pricing | Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | EXPEC 520 |
| Pricing | Available Upon Request |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pre 4000 |
| Pricing | Available Upon Request |
| Brand | EXPEC (Hangzhou Puyu Technology Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 780 |
| Heating Block Material | High-Purity Graphite |
| Automation Level | Full Unattended Operation |
| Acid Resistance | PTFE/PFA-Wetted Components Compatible with HNO₃, HCl, HF, and HClO₄ |
| Temperature Control | PID-Controlled Distributed Heating |
| Temperature Range | Ambient to 230 °C |
| Sample Capacity | Up to 48 Positions (Configurable) |
| Acid Addition | Six Independent Peristaltic Pumps + Precision Syringe Pump for Spiking |
| Lid Handling | Motorized Lid Sealing/Unsealing with Condensation-Optimized Design |
| Volume Accuracy | <1% RSD at 50 mL (Ultrasonic Level Sensing) |
| Volume Range | 5–50 mL |
| Mixing Method | Pneumatic Bubble Agitation |
| Sample Transfer | Integrated Robotic Arm to Autosampler Tray |
| Exhaust System | Dedicated Acid-Fume Extraction with Corrosion-Resistant Ducting |
| Compliance | Designed for GLP/GMP Environments |
| Brand | EXPEC |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 510S |
| Sample Capacity Options | 9 / 16 / 36 positions |
| Heating Method | Water Bath |
| Compliance | Designed for GLP/GMP-aligned sample prep workflows |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 273 |
| Pump Configuration | Oil-free dual-pump system (integrated diaphragm pump + molecular turbomolecular pump) |
| Compliance | EPA Method TO-14A, TO-15A, and HJ 759-2015 |
| Control Interface | External tablet via Wi-Fi (no dedicated PC required) |
| Cleaning Modes | Dry purge, humidified rinse, heated humidified rinse |
| Vacuum Performance | ≤5 mTorr base pressure |
| Throughput | Configurable for 4-position desktop station or 8-position oven-integrated station |
| Certifications | Designed for GLP-compliant laboratories |
| Brand | Titan Instruments |
|---|---|
| Origin | Beijing, China |
| Model | APLE-5000 |
| Extraction Mode | Parallel & Sequential Dual-Channel |
| Sample Capacity | 24 positions (unattended) |
| Solvent Compatibility | Common organic solvents (e.g., acetone, dichloromethane, hexane, methanol, ethyl acetate) |
| Operating Pressure | Up to 20 MPa |
| Temperature Range | Ambient to 200 °C |
| Extraction Cell Options | 1, 5, 10, 22, 34, 66, and 100 mL |
| Collection Precision | ±0.1 mL |
| Control Interface | Windows-based software with Wi-Fi remote access |
| Data Integrity | Audit trail, user authentication, method versioning, and electronic signature support compliant with GLP/GMP requirements |
| Brand | EXPEC (Furui Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 272 |
| Sample Capacity | 16 positions standard, expandable to 48 positions (3 × 16) |
| Sample Types | Electropolished SUMMA canisters (6–30 L), gas sampling bags (Tedlar®, FlexFoil®), and crimp-top or screw-cap sampling vials |
| Flow Path | Fully inertized (SilcoNert®/Sulfinert®-treated stainless steel), heated to 110 °C ± 5 °C |
| Automation Functions | Automated leak check (pressure decay method), flow path purge & bake-out, sequence-based auto-injection |
| Compliance | Designed for EPA Method TO-14A, TO-15A, ASTM D6196, and ISO 16017-1 workflows |
| Brand | EXPEC (Hangzhou Superspectra Technology Co., Ltd.) |
|---|---|
| Model | EXPEC 570 |
| Configuration Options | 2-, 6-, 8-channel & PFA-dedicated variants |
| Origin | Zhejiang, China |
| System Architecture | Integrated touchscreen-controlled platform with internal waste segregation |
| Sample Throughput | Batch-mode processing for up to 8 samples simultaneously (model-dependent) |
| Flow Control | Precision syringe-pump-driven elution with column-seal plug design |
| Compatibility | Standard 1 mL–6 mL SPE cartridges (C18, HLB, Florisil, SAX, SCX, PFA-lined, etc.) |
| Optional Modules | Large-volume aqueous sample enrichment (>500 mL), custom cartridge adapters, GLP-compliant audit trail upgrade |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 530 |
| Capacity | 12-position parallel processing |
| Endpoint Detection | Auto-sensing nitrogen blowdown termination |
| Final Volume Options | 0.5 mL or 1.0 mL (user-selectable) |
| Visual Monitoring | Triple-sided tempered glass viewport with integrated LED illumination |
| Sample Tube Compatibility | 80 mL and 300 mL tubes |
| Optional Feature | Wall-rinse module for solvent-assisted recovery enhancement |
| Safety Design | Fully enclosed water bath chamber with internal exhaust fan and dedicated vent ducting |
| Brand | EXPEC (Puyu Technology) |
|---|---|
| Origin | Zhejiang, China |
| Model | EXPEC 790F |
| Maximum Operating Temperature | 300 °C |
| Maximum Operating Pressure | 20 MPa |
| Safety Vessel Rating | 30 MPa |
| Digestion Cavity | Single-zone, uniform temperature/pressure |
| Sample Capacity | Up to 96 samples per batch (configurable rotor: 6/8/18/24 positions) |
| Acid Volume Range | 2–3 mL per sample |
| Final Volume Accuracy | <1% RSD at 50 mL (5–50 mL range) |
| Reagent Delivery | PTFE-lined peristaltic pumps & precision syringe pump |
| Filtration | Auto-replacement disposable filter cartridges |
| Interface | ICP-OES/ICP-MS direct coupling support |
| Compliance | Designed for GLP/GMP-aligned workflows |
Show next